December 2022 - gerrit-log - lists.osmocom.org

Change in osmo-mgw[master]: ctrl: take both address and port from vty config

by msuraev

msuraev has submitted this change. ( https://gerrit.osmocom.org/c/osmo-mgw/+/30666 ) Change subject: ctrl: take both address and port from vty config ...................................................................... ctrl: take both address and port from vty config Change-Id: Id053bc02e0a6359e52a0f5e110128d3bb87ed151 --- M include/osmocom/mgcp/Makefile.am D include/osmocom/mgcp/mgcp_ctrl.h M src/libosmo-mgcp/Makefile.am D src/libosmo-mgcp/mgcp_ctrl.c M src/osmo-mgw/mgw_main.c 5 files changed, 2 insertions(+), 65 deletions(-) Approvals: Jenkins Builder: Verified pespin: Looks good to me, but someone else must approve laforge: Looks good to me, approved diff --git a/include/osmocom/mgcp/Makefile.am b/include/osmocom/mgcp/Makefile.am index 60f29c6..15ff01a 100644 --- a/include/osmocom/mgcp/Makefile.am +++ b/include/osmocom/mgcp/Makefile.am @@ -6,7 +6,6 @@ mgcp_endp.h \ mgcp_sdp.h \ mgcp_codec.h \ - mgcp_ctrl.h \ mgcp_trunk.h \ debug.h \ mgcp_ratectr.h \ diff --git a/include/osmocom/mgcp/mgcp_ctrl.h b/include/osmocom/mgcp/mgcp_ctrl.h deleted file mode 100644 index d7ab7cb..0000000 --- a/include/osmocom/mgcp/mgcp_ctrl.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * (C) 2020 by Harald Welte <laforge(a)gnumonks.org> - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU Affero General Public License as published by - * the Free Software Foundation; either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU Affero General Public License for more details. - * - * You should have received a copy of the GNU Affero General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - */ - -#pragma once - -struct ctrl_handle *mgw_ctrl_interface_setup(struct mgcp_config *cfg, - const char *bind_addr, uint16_t port); - diff --git a/src/libosmo-mgcp/Makefile.am b/src/libosmo-mgcp/Makefile.am index de42c0e..309ae3f 100644 --- a/src/libosmo-mgcp/Makefile.am +++ b/src/libosmo-mgcp/Makefile.am @@ -45,7 +45,6 @@ mgcp_stat.c \ mgcp_endp.c \ mgcp_trunk.c \ - mgcp_ctrl.c \ mgcp_ratectr.c \ mgcp_e1.c \ mgcp_iuup.c \ diff --git a/src/libosmo-mgcp/mgcp_ctrl.c b/src/libosmo-mgcp/mgcp_ctrl.c deleted file mode 100644 index 0ba231b..0000000 --- a/src/libosmo-mgcp/mgcp_ctrl.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * (C) 2020 by Harald Welte <laforge(a)gnumonks.org> - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU Affero General Public License as published by - * the Free Software Foundation; either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU Affero General Public License for more details. - * - * You should have received a copy of the GNU Affero General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - */ - -#include <osmocom/ctrl/control_if.h> -#include <osmocom/mgcp/mgcp.h> - - -static int mgw_ctrl_node_lookup(void *data, vector vline, int *node_type, - void **node_data, int *i) -{ - return 0; -} - - -struct ctrl_handle *mgw_ctrl_interface_setup(struct mgcp_config *cfg, - const char *bind_addr, uint16_t port) -{ - return ctrl_interface_setup_dynip2(cfg, bind_addr, port, mgw_ctrl_node_lookup, - _LAST_CTRL_NODE); -} diff --git a/src/osmo-mgw/mgw_main.c b/src/osmo-mgw/mgw_main.c index 7a76210..cd9d75d 100644 --- a/src/osmo-mgw/mgw_main.c +++ b/src/osmo-mgw/mgw_main.c @@ -41,7 +41,6 @@ #include <osmocom/mgcp/debug.h> #include <osmocom/mgcp/mgcp_endp.h> #include <osmocom/mgcp/mgcp_trunk.h> -#include <osmocom/mgcp/mgcp_ctrl.h> #include <osmocom/core/application.h> #include <osmocom/core/msgb.h> @@ -51,7 +50,7 @@ #include <osmocom/core/rate_ctr.h> #include <osmocom/core/logging.h> #include <osmocom/core/socket.h> - +#include <osmocom/ctrl/control_if.h> #include <osmocom/ctrl/control_vty.h> #include <osmocom/vty/telnet_interface.h> @@ -366,7 +365,7 @@ if (rc < 0) return rc; - cfg->ctrl = mgw_ctrl_interface_setup(cfg, ctrl_vty_get_bind_addr(), OSMO_CTRL_PORT_MGW); + cfg->ctrl = ctrl_interface_setup(cfg, OSMO_CTRL_PORT_MGW, NULL); if (!cfg->ctrl) { fprintf(stderr, "Failed to init the control interface on %s:%u. Exiting\n", ctrl_vty_get_bind_addr(), OSMO_CTRL_PORT_MGW); -- To view, visit https://gerrit.osmocom.org/c/osmo-mgw/+/30666 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-mgw Gerrit-Branch: master Gerrit-Change-Id: Id053bc02e0a6359e52a0f5e110128d3bb87ed151 Gerrit-Change-Number: 30666 Gerrit-PatchSet: 4 Gerrit-Owner: msuraev <msuraev(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: msuraev <msuraev(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: merged

2 years, 6 months

1
0
0 0

Change in osmo-msc[master]: ctrl: take both address and port from vty config

by msuraev

msuraev has submitted this change. ( https://gerrit.osmocom.org/c/osmo-msc/+/30664 ) Change subject: ctrl: take both address and port from vty config ...................................................................... ctrl: take both address and port from vty config Change-Id: I31e971270a6658366651b29c99ec5247656c62c6 --- M src/osmo-msc/msc_main.c 1 file changed, 1 insertion(+), 2 deletions(-) Approvals: Jenkins Builder: Verified pespin: Looks good to me, but someone else must approve laforge: Looks good to me, approved diff --git a/src/osmo-msc/msc_main.c b/src/osmo-msc/msc_main.c index c6514c2..5e44e9b 100644 --- a/src/osmo-msc/msc_main.c +++ b/src/osmo-msc/msc_main.c @@ -693,8 +693,7 @@ /* start control interface after reading config for * ctrl_vty_get_bind_addr() */ - msc_network->ctrl = ctrl_interface_setup_dynip(msc_network, ctrl_vty_get_bind_addr(), - OSMO_CTRL_PORT_MSC, NULL); + msc_network->ctrl = ctrl_interface_setup(msc_network, OSMO_CTRL_PORT_MSC, NULL); if (!msc_network->ctrl) { fprintf(stderr, "Failed to initialize control interface. Exiting.\n"); return -1; -- To view, visit https://gerrit.osmocom.org/c/osmo-msc/+/30664 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-msc Gerrit-Branch: master Gerrit-Change-Id: I31e971270a6658366651b29c99ec5247656c62c6 Gerrit-Change-Number: 30664 Gerrit-PatchSet: 1 Gerrit-Owner: msuraev <msuraev(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: msuraev <msuraev(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: merged

2 years, 6 months

1
0
0 0

Change in osmo-gbproxy[master]: ctrl: take both address and port from vty config

by msuraev

msuraev has submitted this change. ( https://gerrit.osmocom.org/c/osmo-gbproxy/+/30669 ) Change subject: ctrl: take both address and port from vty config ...................................................................... ctrl: take both address and port from vty config Change-Id: I9bb88fa53a91cc96440d83958450729fa433a04b --- M src/gb_proxy_main.c 1 file changed, 1 insertion(+), 1 deletion(-) Approvals: Jenkins Builder: Verified pespin: Looks good to me, but someone else must approve laforge: Looks good to me, approved diff --git a/src/gb_proxy_main.c b/src/gb_proxy_main.c index ba49a77..da69f9c 100644 --- a/src/gb_proxy_main.c +++ b/src/gb_proxy_main.c @@ -341,7 +341,7 @@ /* Start control interface after getting config for * ctrl_vty_get_bind_addr() */ - ctrl = ctrl_interface_setup_dynip(gbcfg, ctrl_vty_get_bind_addr(), OSMO_CTRL_PORT_GBPROXY, NULL); + ctrl = ctrl_interface_setup(gbcfg, OSMO_CTRL_PORT_GBPROXY, NULL); if (!ctrl) { LOGP(DGPRS, LOGL_FATAL, "Failed to create CTRL interface.\n"); exit(1); -- To view, visit https://gerrit.osmocom.org/c/osmo-gbproxy/+/30669 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-gbproxy Gerrit-Branch: master Gerrit-Change-Id: I9bb88fa53a91cc96440d83958450729fa433a04b Gerrit-Change-Number: 30669 Gerrit-PatchSet: 1 Gerrit-Owner: msuraev <msuraev(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: msuraev <msuraev(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: merged

2 years, 6 months

1
0
0 0

Change in osmo-ggsn[master]: ctrl: take both address and port from vty config

by msuraev

msuraev has submitted this change. ( https://gerrit.osmocom.org/c/osmo-ggsn/+/30667 ) Change subject: ctrl: take both address and port from vty config ...................................................................... ctrl: take both address and port from vty config Change-Id: Ib31d67591657e308eebd1e6b7e23f79e6a3656e9 --- M ggsn/ggsn_main.c 1 file changed, 1 insertion(+), 2 deletions(-) Approvals: Jenkins Builder: Verified pespin: Looks good to me, but someone else must approve laforge: Looks good to me, approved diff --git a/ggsn/ggsn_main.c b/ggsn/ggsn_main.c index 2d917c1..bc9e0c3 100644 --- a/ggsn/ggsn_main.c +++ b/ggsn/ggsn_main.c @@ -227,8 +227,7 @@ if (rc < 0) exit(1); - g_ctrlh = ctrl_interface_setup_dynip(NULL, ctrl_vty_get_bind_addr(), - OSMO_CTRL_PORT_GGSN, NULL); + g_ctrlh = ctrl_interface_setup(NULL, OSMO_CTRL_PORT_GGSN, NULL); if (!g_ctrlh) { LOGP(DGGSN, LOGL_ERROR, "Failed to create CTRL interface.\n"); exit(1); -- To view, visit https://gerrit.osmocom.org/c/osmo-ggsn/+/30667 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ggsn Gerrit-Branch: master Gerrit-Change-Id: Ib31d67591657e308eebd1e6b7e23f79e6a3656e9 Gerrit-Change-Number: 30667 Gerrit-PatchSet: 1 Gerrit-Owner: msuraev <msuraev(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: msuraev <msuraev(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: merged

2 years, 6 months

1
0
0 0

Change in osmo-sgsn[master]: ctrl: take both address and port from vty config

by msuraev

msuraev has submitted this change. ( https://gerrit.osmocom.org/c/osmo-sgsn/+/30668 ) Change subject: ctrl: take both address and port from vty config ...................................................................... ctrl: take both address and port from vty config Change-Id: Ie1330b152a2e5cdcdb80a1c958e7c1d784b78eab --- M src/sgsn/sgsn_main.c 1 file changed, 1 insertion(+), 2 deletions(-) Approvals: Jenkins Builder: Verified pespin: Looks good to me, but someone else must approve laforge: Looks good to me, approved diff --git a/src/sgsn/sgsn_main.c b/src/sgsn/sgsn_main.c index af9757a..c775922 100644 --- a/src/sgsn/sgsn_main.c +++ b/src/sgsn/sgsn_main.c @@ -479,8 +479,7 @@ /* start control interface after reading config for * ctrl_vty_get_bind_addr() */ - g_ctrlh = ctrl_interface_setup_dynip(NULL, ctrl_vty_get_bind_addr(), - OSMO_CTRL_PORT_SGSN, NULL); + g_ctrlh = ctrl_interface_setup(NULL, OSMO_CTRL_PORT_SGSN, NULL); if (!g_ctrlh) { LOGP(DGPRS, LOGL_ERROR, "Failed to create CTRL interface.\n"); exit(1); -- To view, visit https://gerrit.osmocom.org/c/osmo-sgsn/+/30668 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-sgsn Gerrit-Branch: master Gerrit-Change-Id: Ie1330b152a2e5cdcdb80a1c958e7c1d784b78eab Gerrit-Change-Number: 30668 Gerrit-PatchSet: 1 Gerrit-Owner: msuraev <msuraev(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: msuraev <msuraev(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: merged

2 years, 6 months

1
0
0 0

Change in osmo-bts[master]: ctrl: take both address and port from vty config

by msuraev

msuraev has submitted this change. ( https://gerrit.osmocom.org/c/osmo-bts/+/30663 ) Change subject: ctrl: take both address and port from vty config ...................................................................... ctrl: take both address and port from vty config Change-Id: Ieca05004255c40287e6427560c2636b39529cf07 --- M include/osmo-bts/control_if.h M src/common/bts_ctrl_lookup.c M src/common/main.c 3 files changed, 4 insertions(+), 7 deletions(-) Approvals: laforge: Looks good to me, approved pespin: Looks good to me, but someone else must approve Jenkins Builder: Verified diff --git a/include/osmo-bts/control_if.h b/include/osmo-bts/control_if.h index 490c87a..f6d877b 100644 --- a/include/osmo-bts/control_if.h +++ b/include/osmo-bts/control_if.h @@ -1,5 +1,4 @@ #pragma once int bts_ctrl_cmds_install(struct gsm_bts *bts); -struct ctrl_handle *bts_controlif_setup(struct gsm_bts *bts, - const char *bind_addr, uint16_t port); +struct ctrl_handle *bts_controlif_setup(struct gsm_bts *bts, uint16_t port); diff --git a/src/common/bts_ctrl_lookup.c b/src/common/bts_ctrl_lookup.c index a3e3c8b..7a1dfdf 100644 --- a/src/common/bts_ctrl_lookup.c +++ b/src/common/bts_ctrl_lookup.c @@ -88,14 +88,12 @@ return -ERANGE; } -struct ctrl_handle *bts_controlif_setup(struct gsm_bts *bts, - const char *bind_addr, uint16_t port) +struct ctrl_handle *bts_controlif_setup(struct gsm_bts *bts, uint16_t port) { struct ctrl_handle *hdl; int rc = 0; - hdl = ctrl_interface_setup_dynip(bts, bind_addr, port, - bts_ctrl_node_lookup); + hdl = ctrl_interface_setup(bts, port, bts_ctrl_node_lookup); if (!hdl) return NULL; diff --git a/src/common/main.c b/src/common/main.c index ea6c61e..a67364e 100644 --- a/src/common/main.c +++ b/src/common/main.c @@ -365,7 +365,7 @@ gsmtap_source_add_sink(g_bts->gsmtap.inst); } - bts_controlif_setup(g_bts, ctrl_vty_get_bind_addr(), OSMO_CTRL_PORT_BTS); + bts_controlif_setup(g_bts, OSMO_CTRL_PORT_BTS); rc = telnet_init_dynif(tall_bts_ctx, NULL, vty_get_bind_addr(), g_vty_port_num); -- To view, visit https://gerrit.osmocom.org/c/osmo-bts/+/30663 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-bts Gerrit-Branch: master Gerrit-Change-Id: Ieca05004255c40287e6427560c2636b39529cf07 Gerrit-Change-Number: 30663 Gerrit-PatchSet: 3 Gerrit-Owner: msuraev <msuraev(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: msuraev <msuraev(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: merged

2 years, 6 months

1
0
0 0

Change in osmo-upf[master]: ctrl: take both address and port from vty config

by msuraev

msuraev has submitted this change. ( https://gerrit.osmocom.org/c/osmo-upf/+/30673 ) Change subject: ctrl: take both address and port from vty config ...................................................................... ctrl: take both address and port from vty config Change-Id: Ia652ce820e1299b23055f032f8cd0a87a8d60ba3 --- M src/osmo-pfcp-tool/osmo_pfcp_tool_main.c M src/osmo-upf/osmo_upf_main.c 2 files changed, 2 insertions(+), 2 deletions(-) Approvals: Jenkins Builder: Verified pespin: Looks good to me, but someone else must approve laforge: Looks good to me, approved diff --git a/src/osmo-pfcp-tool/osmo_pfcp_tool_main.c b/src/osmo-pfcp-tool/osmo_pfcp_tool_main.c index e950f7f..9a760d4 100644 --- a/src/osmo-pfcp-tool/osmo_pfcp_tool_main.c +++ b/src/osmo-pfcp-tool/osmo_pfcp_tool_main.c @@ -305,7 +305,7 @@ return 2; /* start control interface, after reading config for ctrl_vty_get_bind_addr() */ - g_pfcp_tool->ctrl = ctrl_interface_setup_dynip(g_pfcp_tool, ctrl_vty_get_bind_addr(), OSMO_CTRL_PORT_PFCP_TOOL, NULL); + g_pfcp_tool->ctrl = ctrl_interface_setup(g_pfcp_tool, OSMO_CTRL_PORT_PFCP_TOOL, NULL); if (!g_pfcp_tool->ctrl) { fprintf(stderr, "Failed to initialize control interface. Exiting.\n"); return -1; diff --git a/src/osmo-upf/osmo_upf_main.c b/src/osmo-upf/osmo_upf_main.c index 65a0e84..40dbf09 100644 --- a/src/osmo-upf/osmo_upf_main.c +++ b/src/osmo-upf/osmo_upf_main.c @@ -310,7 +310,7 @@ return 2; /* start control interface, after reading config for ctrl_vty_get_bind_addr() */ - g_upf->ctrl = ctrl_interface_setup_dynip(g_upf, ctrl_vty_get_bind_addr(), OSMO_CTRL_PORT_UPF, NULL); + g_upf->ctrl = ctrl_interface_setup(g_upf, OSMO_CTRL_PORT_UPF, NULL); if (!g_upf->ctrl) { fprintf(stderr, "Failed to initialize control interface. Exiting.\n"); return -1; -- To view, visit https://gerrit.osmocom.org/c/osmo-upf/+/30673 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-upf Gerrit-Branch: master Gerrit-Change-Id: Ia652ce820e1299b23055f032f8cd0a87a8d60ba3 Gerrit-Change-Number: 30673 Gerrit-PatchSet: 1 Gerrit-Owner: msuraev <msuraev(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: msuraev <msuraev(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: merged

2 years, 6 months

1
0
0 0

Change in osmo-ci[master]: don't report every unstable TTCN3 build

by laforge

laforge has submitted this change. ( https://gerrit.osmocom.org/c/osmo-ci/+/30764 ) Change subject: don't report every unstable TTCN3 build ...................................................................... don't report every unstable TTCN3 build This saves deleting >= 80 e-mails every day. Closes: OS#5841 Change-Id: I9593a3c3a94ab3f66ed4cd92906e7428a9d04bf5 --- M jobs/ttcn3-testsuites-kernel-git.yml M jobs/ttcn3-testsuites.yml 2 files changed, 2 insertions(+), 2 deletions(-) Approvals: Jenkins Builder: Verified osmith: Looks good to me, approved diff --git a/jobs/ttcn3-testsuites-kernel-git.yml b/jobs/ttcn3-testsuites-kernel-git.yml index e378122..80f8840 100644 --- a/jobs/ttcn3-testsuites-kernel-git.yml +++ b/jobs/ttcn3-testsuites-kernel-git.yml @@ -105,7 +105,7 @@ results: '**/junit-xml-*.log' allow-empty-results: false - email: - notify-every-unstable-build: true + notify-every-unstable-build: false recipients: laforge(a)gnumonks.org osmith(a)sysmocom.de send-to-individuals: false - archive: diff --git a/jobs/ttcn3-testsuites.yml b/jobs/ttcn3-testsuites.yml index e59611c..e8b40e8 100644 --- a/jobs/ttcn3-testsuites.yml +++ b/jobs/ttcn3-testsuites.yml @@ -477,7 +477,7 @@ results: '**/junit-xml-*.log' allow-empty-results: false - email: - notify-every-unstable-build: true + notify-every-unstable-build: false recipients: '{obj:email}' send-to-individuals: false - archive: -- To view, visit https://gerrit.osmocom.org/c/osmo-ci/+/30764 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ci Gerrit-Branch: master Gerrit-Change-Id: I9593a3c3a94ab3f66ed4cd92906e7428a9d04bf5 Gerrit-Change-Number: 30764 Gerrit-PatchSet: 1 Gerrit-Owner: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: osmith <osmith(a)sysmocom.de> Gerrit-MessageType: merged

2 years, 6 months

1
0
0 0

Change in osmo-ci[master]: ttcn3-testsuites-kernel-git: Use normal e-mail address

by laforge

laforge has submitted this change. ( https://gerrit.osmocom.org/c/osmo-ci/+/30765 ) Change subject: ttcn3-testsuites-kernel-git: Use normal e-mail address ...................................................................... ttcn3-testsuites-kernel-git: Use normal e-mail address There's no need for a hard-coded special list of e-mail addresses for kernel related tests. Change-Id: Ida4313997c9ecee13af22414e6a1799a2d9dd2af --- M jobs/ttcn3-testsuites-kernel-git.yml 1 file changed, 2 insertions(+), 1 deletion(-) Approvals: Jenkins Builder: Verified osmith: Looks good to me, approved diff --git a/jobs/ttcn3-testsuites-kernel-git.yml b/jobs/ttcn3-testsuites-kernel-git.yml index 80f8840..6bbd111 100644 --- a/jobs/ttcn3-testsuites-kernel-git.yml +++ b/jobs/ttcn3-testsuites-kernel-git.yml @@ -106,7 +106,7 @@ allow-empty-results: false - email: notify-every-unstable-build: false - recipients: laforge(a)gnumonks.org osmith(a)sysmocom.de + recipients: '{obj:email}' send-to-individuals: false - archive: allow-empty: false @@ -128,5 +128,6 @@ wrappers: - ansicolor: colormap: xterm + email: jenkins-notifications(a)lists.osmocom.org # vim: expandtab tabstop=2 shiftwidth=2 -- To view, visit https://gerrit.osmocom.org/c/osmo-ci/+/30765 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ci Gerrit-Branch: master Gerrit-Change-Id: Ida4313997c9ecee13af22414e6a1799a2d9dd2af Gerrit-Change-Number: 30765 Gerrit-PatchSet: 1 Gerrit-Owner: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: osmith <osmith(a)sysmocom.de> Gerrit-MessageType: merged

2 years, 6 months

1
0
0 0

Change in libosmo-netif[master]: Introduce utils/osmo-amr-inspect program

by osmith

Attention is currently required from: pespin. osmith has posted comments on this change. ( https://gerrit.osmocom.org/c/libosmo-netif/+/30757 ) Change subject: Introduce utils/osmo-amr-inspect program ...................................................................... Patch Set 6: Code-Review+1 (1 comment) File utils/osmo-amr-inspect.c: https://gerrit.osmocom.org/c/libosmo-netif/+/30757/comment/eeeaa542_7c7ef42f PS6, Line 2: paylods payloads -- To view, visit https://gerrit.osmocom.org/c/libosmo-netif/+/30757 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: libosmo-netif Gerrit-Branch: master Gerrit-Change-Id: Iffa6cc2e5391b77e3097d4c3b8d3f5211427dbe2 Gerrit-Change-Number: 30757 Gerrit-PatchSet: 6 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: osmith <osmith(a)sysmocom.de> Gerrit-CC: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Attention: pespin <pespin(a)sysmocom.de> Gerrit-Comment-Date: Thu, 22 Dec 2022 08:22:26 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

2 years, 6 months

1
0
0 0

2025

2024

2023

2022

gerrit-log December 2022