Hi community: when i try to flash firmware images from https://ftp.osmocom.org/binaries/simtrace2/firmware/latest/simtrace-dfu-flas...
simtrace2-sniff doesn't work.
sudo bossac --port=/dev/ttyACM0 --usb-port=1 --erase --verify --boot=1 --write simtrace-dfu-flash-latest.bin Erase flash
Done in 0.013 seconds Write 15880 bytes to flash (63 pages) [==============================] 100% (63/63 pages) Done in 0.604 seconds Verify 15880 bytes of flash [==============================] 100% (63/63 pages) Verify successful Done in 0.474 seconds Set boot flash true
$ lsusb
Bus 003 Device 030: ID 1d50:60e3 OpenMoko, Inc.
$sudo ./simtrace2-list USB matches: 1 1d50:60e3 Addr=30, Path=3-2, Cfg=2, Intf=0, Alt=0: 255/255/0 (0.7.0.60-859f)
$ sudo ./simtrace2-sniff simtrace2-sniff - Phone-SIM card communication sniffer (C) 2010-2017 by Harald Welte laforge@gnumonks.org (C) 2018 by Kevin Redon kredon@sysmocom.de
No compatible USB devices found: Resource temporarily unavailable
sudo dfu-util --list dfu-util 0.8
Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc. Copyright 2010-2014 Tormod Volden and Stefan Schmidt This program is Free Software and has ABSOLUTELY NO WARRANTY Please report bugs to dfu-util@lists.gnumonks.org
Found DFU: [1d50:60e3] ver=0000, devnum=30, cfg=1, intf=0, alt=2, name="not available", serial="51203120395134503230333139303033" Found DFU: [1d50:60e3] ver=0000, devnum=30, cfg=1, intf=0, alt=1, name="Flash (Application Partition)", serial="51203120395134503230333139303033" Found DFU: [1d50:60e3] ver=0000, devnum=30, cfg=1, intf=0, alt=0, name="RAM", serial="51203120395134503230333139303033"
What should I do?
On Mon, Jun 15, 2020 at 12:25:27PM +0800, 雪碧 0xroot wrote:
No compatible USB devices found: Resource temporarily unavailable
something seems to be claiming / using the USB interface already. Maybe there is some other software that tries to open/claim/use the simtrace2 USB device?
I'd suggest to try on another computer (or another Linux version/distribution) and see how things go there.
does a 'lsusb -v' on the device work, or do you get errors? do yo usee any related errors in dmesg?
Hi,
have you flashed the application firmware after you flashed the bootloader via bossac?
this will be the case when you power it up and only the green led is lit.
see https://osmocom.org/projects/simtrace2/wiki/Flashing#DFU
or simply:
sudo dfu-util --device 1d50:60e3 --cfg 1 --alt 1 --reset --download simtrace-trace-dfu.bin
afterwards you will see both leds (red and green) lit when plugging it in.
kind regards
sorry for forgetting to cc community
Best Wishes
---------- Forwarded message --------- 发件人： 雪碧 0xroot renxianyuanqi@gmail.com Date: 2020年6月16日周二 上午9:34 Subject: Re: simtrace2 flash firmware images issue To: Joachim Steiger jsteiger@sysmocom.de
Thanks for the reply of Joachim Steiger and Harald Welte.
I try to flashed again,when *sudo bossac --port=/dev/ttyACM0 --usb-port=1 --erase --verify --boot=1 --write simtrace-dfu-flash-latest.bin *done,press RESET key,and execute *sudo dfu-util --device 1d50:60e3 --cfg 1 --alt 1 --reset --download simtrace-trace-dfu.bin*
finally，SIMtrace works fine now.
Thanks,And have a nice day.
Joachim Steiger jsteiger@sysmocom.de 于2020年6月15日周一 下午10:53写道：
Hi,
have you flashed the application firmware after you flashed the bootloader via bossac?
this will be the case when you power it up and only the green led is lit.
see https://osmocom.org/projects/simtrace2/wiki/Flashing#DFU
or simply:
sudo dfu-util --device 1d50:60e3 --cfg 1 --alt 1 --reset --download simtrace-trace-dfu.bin
afterwards you will see both leds (red and green) lit when plugging it in.
kind regards
--
- Joachim Steiger jsteiger@sysmocom.de http://www.sysmocom.de/
=======================================================================
- sysmocom - systems for mobile communications GmbH
- Alt Moabit 93
- 10559 Berlin, Germany
- Sitz / Registered office: Berlin, HRB 134158 B
- Geschaeftsfuehrer / Managing Directors: Harald Welte
-
Harald Welte -
Joachim Steiger -
雪碧 0xroot