17 Apr
2018
17 Apr
'18
3:41 a.m.
Dear Osmocom,
I have a question about the latest build of the simtrace2 based on the AT91SAM3..
Currently we have assembled some boards based on the v1.5 design of the Simtracer received
from the git repository git.osmocom.org/simtrace (branch v1.5)
If have tried to compile the firmware of the repository git.osmocom.org/simtrace2 But I
run in to some issue after the firmware is loaded.
Also I am not able to find the simtrace2 tool to do simtracing after compilation in the
host directory ..
Is this firmware working already ? (The website @sysmocom says "SIMtrace 2" will
be available from late March 2018)
Or am I missing something ?
Thanks in advance..
Met vriendelijke groet/С наилучшими пожеланиями/With kind regards,
[V-Tell]
Gerard Bakker | ICT / Voice Engineer
V-Tell Netherlands
Glotell Telecom B.V.
NL-Office +31 63 513 51 23
Willem Dreeslaan 37
NL-Mobile +31 64 202 21 06
2729 ND Zoetermeer, NL
RU-Mobile +7 958 964 19 98
www.v-tell.nl<http://www.v-tell.nl/>
US-Mobile +1 202 370 70 38
gerard.bakker@v-tell.nl<mailto:gerard.bakker@v-tell.nl>
This message contains confidential information and is intended only for the individual
named. Its content may not be disclosed, copied or transferred to any (third) party in
whole or in part without the prior written permission of Glotell B.V. Please notify the
sender immediately if you have received this email by mistake and delete this email from
your system.
Please do not print this email unless it is necessary. It helps to keep the environment
forested and litter-free.
26 Sep
26 Sep
7:14 p.m.
On Mon, Apr 16, 2018 at 08:08:22AM +0000, Gerard Bakker wrote:
Dear Osmocom,
I have a question about the latest build of the simtrace2 based on the AT91SAM3..
I'm not sure if you mean the AT91SAM7S or the SAM3S.
The AT91 prefix only is for the SAM7S, with is the micro-controller used by the simtarce
(v1) firmware.
SAM3S is the micro-controller used by the simtarce v2 firmware.
Currently we have assembled some boards based on the
v1.5 design of the Simtracer received from the git repository git.osmocom.org/simtrace
(branch v1.5)
the v1.5 simtrace branch has actually two hardware designs:
- the kicad one, which still uses the SAM7S
- the pcd initial design (never completed and produced), which uses the SAM3S
If have tried to compile the firmware of the repository git.osmocom.org/simtrace2 But I
run in to some issue after the firmware is loaded.
Also I am not able to find the simtrace2 tool to do simtracing after compilation in the
host directory ..
could you provide more information and logs?
what are you trying to do, what did you do, what is the expected result, what is the
actual result (with error).
Is this firmware working already ?
yes, it is.
not every function is implemented for every hardware though (this is WiP), but
tracing/sniffing using SAM3S-based simtrace hardware works.
You can find more information in the wiki:
https://osmocom.org/projects/simtrace2/wiki#simtrace2-sniff
There is also some pre-compiled firmware (so you don't need any cross-compiler)
available here: http://ftp.osmocom.org/binaries/simtrace2/firmware/
(The website @sysmocom says "SIMtrace 2"
will be available from late March 2018)
The hardware is just the "old" simtrace board with an SAM3S micro-controller
(nothing else changed).
If you can't/don't want to produce it yourself, it is also made available in the
sysmocom shop: http://shop.sysmocom.de/products/simtrace
The wiki provides more information: https://osmocom.org/projects/simtrace2/wiki
tracing works on simtrace, and card emulation works on the sysmoqmod.
The firmware is being actively developed and more functionalities will come in the
future.
Or am I missing something ?
I hope the previous information helps.
If you find any issues please report them so I can fix it.
thanks,
kevin
2061
days inactive
2223
days old
1 comments
2 participants
participants (2)
-
Gerard Bakker -
Kévin Redon