28 Jun
2012
28 Jun
'12
1:31 p.m.
Hi,
Excerpts from Gabriele.rago's message of Thu Jun 28 12:38:52 +0200 2012:
Hello all, I would do a sim-emulator software that
runs on my PC.
First thing to do is a an interface to connect my PC with sim slot phone.
So I am using this simple interface :
I took a CP2102 module, see this page for example
http://esaid.free.fr/Cdotnet/USB_serial.htm,
then I have put a diode between TXD and RXD, then I have connected RXD to
I/O of phone sim slot,
DSR of CP2102 module to RESET of phone sim slot and connected the two
grounds.
SIM cards come in different classes (different operating voltages). First check if
this is matching.
One important point is that you are completely ignoring the CLK pin.
Thus you baudrate might not match the one set by the phone, and additionally you can also
be out of sync with the clock.
Some old phone have a fixed standard baudrate, that might help (use an osci to debug).
kevin