simtrace December 2020

simtrace@lists.osmocom.org

2 participants
2 discussions

Start a nNew thread

simtrace2 Windows host
by Jérome Dufour 05 Jan '21

05 Jan '21

Hi all, Is there a Windows version of the simtrace2 host software? Regards, Jerome. ᐧ

3 2

Laser Cut SIMtrace Case
by Nick 29 Dec '20

29 Dec '20

Hi all, Had some free time this afternoon so I put together a laser cut case for the SIMtrace (photos attached), It's just cut out of 2mm perspex, with openings for the cards, flexible SIM adapter, USB and 2.5mm jack. They open up from the top for changing the flexible SIM adapters and accessing the buttons / flashing, The designs are attached for anyone who has got access to a makerspace or laser cutter wants to make one, - *SimTrace_2mm_box_version_7.dxf *is the DXF for the design, should work with any cutting software, file is in MM - *Simtrace_Final.rld *is the RDworks layout with the logo in it (most low end lasers use this software) and it has the nesting & logo baked in (DXF does not have the logo embedded) - *Osmocom_Logo_No_Gradient.jpg* is an adjusted version of the Osmocom logo as the laser CAM software doesn't deal with gradients I'm not sure where the best place to put the files are, so others can make their own - on the SIMtrace page on the Wiki or in the Repo itself? Cheers, Nick [image: image.png] [image: SIMtrace.png]

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

simtrace December 2020