simtrace February 2012

simtrace@lists.osmocom.org

6 participants
4 discussions

Loosing 1 byte on each chunk of URB transfer
by Myonium 22 Mar '12

22 Mar '12

Hi It seems to me that simtrace looses a byte between 2 URB transfers from the device. To trace the problem down, I wrote a little test-program, running the same APDU against the smart card. I’m using simtrace to trace the card on the HW level and at the very same time I trace on the PCSC layer of the OS. Of cause the 2 APDU traces should give exactly the same results. Surprisimgly I found that the simtrace is swallowing one byte between two URB chunks transferred. Please find below the 2 logs A.) PCSC trace, B.) simtrace output. In this example simtrace is missing 1 byte (“7F”) between the two URB chunks a.) and b.). This missing byte causes to scrow up the analyser (APDU number 5). The same problem occurs also between the next two URB chunks b.) and c.): This time a “00” gets lost ... etc etc. A.) The PCSC traces as reference: ======================================= 1.) transmitted: 80 C2 00 00 28 D8 00 01 6F 00 F5 EF BF B1 8C 76 16 00 0E 43 6F 6E 74 65 6E 74 4D 61 6E 61 67 65 72 00 C0 4B 4E 7F BD 00 04 4D 53 43 4D received: 61 05 2.) transmitted: 00 C0 00 00 05 received: 01 00 00 00 05 90 00 3.) transmitted: 80 C2 00 00 12 D8 00 05 6F 00 C0 4B 4E 7F BD DE EC 00 04 4D 53 43 4D received: 61 0F 4.) transmitted: 00 C0 00 00 0F received: 00 D2 5D 1C 11 27 00 07 37 2E 31 2E 30 2E 30 90 00 5.) transmitted: 80 C2 00 00 14 D8 00 05 6F 00 C0 4B 4E 7F BD 81 87 00 04 4D 53 43 4D 05 00 received: 61 1A 6.) transmitted: 00 C0 00 00 1A received: 00 D2 5D 1C 45 A3 00 00 00 10 2E 4E 45 54 57 01 13 51 21 9C 77 14 27 14 FF FF 90 00 7.) transmitted: 80 C2 00 00 12 D8 00 05 6F 00 C0 4B 4E 7F BD FA 3B 00 04 4D 53 43 4D received: 61 12 8.) transmitted: 00 C0 00 00 12 received: 00 D2 5D 1C 45 A3 00 00 00 08 83 17 65 55 19 7E A5 EB 90 00 9.) transmitted: 80 C2 00 00 1E D8 00 05 6F 00 C0 4B 4E 7F BD 24 FE 00 04 4D 53 43 4D 00 00 00 08 FC 66 34 93 BD 58 68 54 received: 90 00 10.) transmitted: 80 C2 00 00 13 D8 00 05 6F 00 C0 4B 4E 7F BD 6D 08 00 04 4D 53 43 4D 02 received: 61 0A 11.) transmitted: 00 C0 00 00 0A received: 00 D2 5D 1C 61 C0 00 00 00 05 90 00 B.) The simtrace output: ================================================ simtrace - GSM SIM and smartcard tracing (C) 2010 by Harald Welte <laforge(a)gnumonks.org> Entering main loop URB: 01 01 00 00 3b 16 96 41 73 74 72 69 64 ATR APDU: 3b 16 96 41 73 74 72 69 64 a.) URB: 01 00 00 00 80 c2 00 00 28 c2 d8 00 01 6f 00 f5 ef bf b1 8c 76 16 00 0e 43 6f 6e 74 65 6e 74 4d 61 6e 61 67 65 72 00 c0 4b 4e 7f bd 00 04 4d 53 43 4d 61 05 00 c0 00 00 05 c0 01 00 00 00 05 90 00 80 c2 00 00 12 c2 d8 00 05 6f 00 c0 4b 4e 7f bd de ec 00 04 4d 53 43 4d 61 0f 00 c0 00 00 0f c0 00 d2 5d 1c 11 27 00 07 37 2e 31 2e 30 2e 30 90 00 80 c2 00 00 14 c2 d8 00 05 6f 00 c0 4b 4e 1.) APDU: 80 c2 00 00 28 d8 00 01 6f 00 f5 ef bf b1 8c 76 16 00 0e 43 6f 6e 74 65 6e 74 4d 61 6e 61 67 65 72 00 c0 4b 4e 7f bd 00 04 4d 53 43 4d 61 05 2.) APDU: 00 c0 00 00 05 01 00 00 00 05 90 00 3.) APDU: 80 c2 00 00 12 d8 00 05 6f 00 c0 4b 4e 7f bd de ec 00 04 4d 53 43 4d 61 0f 4.) APDU: 00 c0 00 00 0f 00 d2 5d 1c 11 27 00 07 37 2e 31 2e 30 2e 30 90 00 b.) URB: 01 00 00 00 bd 81 00 04 4d 53 43 4d 05 00 61 1a 00 c0 00 00 1a c0 00 d2 5d 1c 45 a3 00 00 00 10 2e 4e 45 54 57 01 13 51 21 9c 77 14 27 14 ff ff 90 00 80 c2 00 00 12 c2 d8 00 05 6f 00 c0 4b 4e 7f bd fa 3b 00 04 4d 53 43 4d 61 12 00 c0 00 00 12 c0 00 d2 5d 1c 45 a3 00 00 00 08 83 17 65 55 19 7e a5 eb 90 00 80 c2 00 00 1e c2 d8 00 05 6f 00 c0 4b 4e 7f bd 24 fe 00 04 4d 53 43 4d 00 00 5.) APDU: 80 c2 00 00 14 d8 00 05 6f 00 c0 4b 4e bd 81 00 04 4d 53 43 4d 05 00 61 1a 00 c0 APDU: 00 00 1a c0 00 d2 5d APDU: 1c 45 a3 00 00 00 10 APDU: 2e 4e 45 54 57 01 13 APDU: 51 21 9c 77 14 27 14 APDU: ff ff 90 00 80 c2 00 APDU: 00 12 c2 d8 00 05 6f APDU: 00 c0 4b 4e 7f bd fa APDU: 3b 00 04 4d 53 43 4d APDU: 61 12 00 c0 00 00 12 APDU: c0 00 d2 5d 1c 45 a3 APDU: 00 00 00 08 83 17 65 APDU: 55 19 7e a5 eb 90 00 c.)URB: 01 04 00 00 08 fc 66 34 93 bd 58 68 54 d.)URB: 01 04 00 00 90 00 80 c2 00 00 13 c2 d8 00 05 6f 00 c0 4b 4e 7f bd 6d 08 00 04 4d 53 43 4d 02 61 0a 00 c0 00 00 0a c0 00 d2 5d 1c 61 c0 00 00 00 05 90 00 APDU: 80 c2 00 00 1e d8 00 05 6f 00 c0 4b 4e 7f bd 24 fe 00 04 4d 53 43 4d 00 00 08 fc 66 34 93 bd 58 68 54 90 00 80 APDU: c2 00 00 13 c2 d8 00 APDU: 05 6f 00 c0 4b 4e 7f APDU: bd 6d 08 00 04 4d 53 APDU: 43 4d 02 61 0a 00 c0 APDU: 00 00 0a c0 00 d2 5d APDU: 1c 61 c0 00 00 00 05 URB: 01 01 00 00 3b 16 96 41 73 74 72 69 64 ATR APDU: 3b 16 96 41 73 74 72 69 64 ========================================================== Is this a problem of simtrace or the firmware? Am I using a wrong firmware? Thanks, Ben

5 19

1.1p board not recognized
by Martin Kaiser 20 Feb '12

20 Feb '12

Dear all, I'm struggling to get started with a 1.1p board. When I connect it via USB (with no simcard inserted and no connection to a phone), the red led is on. Sometimes, both leds remain off after connecting the board when I have a simcard inserted and a phone connected. On one box (debian lenny), the board is never recognized by lsusb or kernel messages. Do I need anything special (other than basic usb support) compiled into the kernel for libusb to do its work in user space? I tried dfu-util -l, the board wasn't listed. On a second box (debian squeeze) there's log messages when the usb is connected Feb 15 22:34:44 greta kernel: [186232.651806] usb 1-1.1: new full speed USB device using ehci_hcd and address 13 Feb 15 22:34:44 greta kernel: [186232.745566] usb 1-1.1: New USB device found, idVendor=16c0, idProduct=0762 Feb 15 22:34:44 greta kernel: [186232.745573] usb 1-1.1: New USB device strings: Mfr=4, Product=5, SerialNumber=0 Feb 15 22:34:44 greta kernel: [186232.745577] usb 1-1.1: Product: SimTrace SIM Sniffer - Runtime Mode Feb 15 22:34:44 greta kernel: [186232.745581] usb 1-1.1: Manufacturer: sysmocom - systems for mobile communications GmbH Feb 15 22:34:44 greta kernel: [186232.745694] usb 1-1.1: configuration #1 chosen from 1 choice lsusb doesn't show anything either the red led is on after connecting, simtrace (linked against libusb-1.0) says "can't open USB device" After some more tries, dfu-util recognizes the board root@greta:~# dfu-util -l dfu-util - (C) 2007-2008 by OpenMoko Inc. This program is Free Software and has ABSOLUTELY NO WARRANTY dfu-util does currently only support DFU version 1.0 Found DFU: [0x16c0:0x0762] devnum=17, cfg=0, intf=0, alt=0, name="SimTrace DFU Interface - Application Partition" Found DFU: [0x16c0:0x0762] devnum=17, cfg=0, intf=0, alt=1, name="SimTrace DFU Interface - Bootloader Partition" Found DFU: [0x16c0:0x0762] devnum=17, cfg=0, intf=0, alt=2, name="SimTrace DFU Interface - RAM" However, I'm not able to write a firmware. I tried the main_simtrace.bin that Harald posted to this list some days ago. root@greta:~# dfu-util -d 16c0:0762 -a0 -D /home/martin/tmp/main_simtrace.bin -R dfu-util - (C) 2007-2008 by OpenMoko Inc. This program is Free Software and has ABSOLUTELY NO WARRANTY dfu-util does currently only support DFU version 1.0 Opening USB Device 0x16c0:0x0762... Found Runtime: [0x16c0:0x0762] devnum=17, cfg=0, intf=0, alt=0, name="SimTrace DFU Interface - Application Partition" Claiming USB DFU Interface... Setting Alternate Setting #0 ... Determining device status: state = dfuERROR, status = 8 dfuERROR, clearing status Determining device status: state = dfuIDLE, status = 0 dfuIDLE, continuing Transfer Size = 0x0100 bytes_per_hash=417 Starting download: [#################################################dfu_download: usb_control_msg returned -32: error sending control message: Broken pipe Error during download Retrying multiple times, I always get the same error. I tried resetting the board with the bootloader button pressed, this didn't change anything. While trying to flash the firmware, there was no sim inserted and no phone connected. Does anyone have an idea what else I can try to track down the problems and get the board up and running? Thanks in advance, Martin

3 5

Corrupted git repository?
by Myonium 17 Feb '12

17 Feb '12

Hi I’m not very familiar with git, but there is something strange with the git repository “git://git.gnumonks.org/openpcd.git”: First of all the the identical revision number “4f7ca20bf40b911c035264d86ef0359d20e7ac88” appears several times: git rev-parse --all 4f7ca20bf40b911c035264d86ef0359d20e7ac88 4f7ca20bf40b911c035264d86ef0359d20e7ac88 4f7ca20bf40b911c035264d86ef0359d20e7ac88 f49cbc1f2503f737a96296993133aec065910935 4f7ca20bf40b911c035264d86ef0359d20e7ac88 3aa065ac48f21ce7c4d0879686fb07b04a60771f 45c13574ff89e3139567943e6a6cae82e754eab0 0febfc567d3f9441811a5490f0ea4d960798d313 Compiling “4f7ca20bf40b911c035264d86ef0359d20e7ac88” results in a not working firmware, even so the changes (PPS changes from Harald) are all correct. (I applied these changes to the v0.4 firmware (revision ebf16b4ddf0dcbadf96aebdec3304f703917fdc7) and it works all nicely.) Could somebody have a look ... Regards, Ben

1 0

SIM dissector now wireshark mainline
by Harald Welte 07 Feb '12

07 Feb '12

Hi all! JFYI, the SIM protocol dissector has finally been merged into wirshark mainline (svn rev. 40854). This means that the daily builds from https://www.wireshark.org/download/automated/osx/ and https://www.wireshark.org/download/automated/win32/ will now work out-of-the-box for SIM card tracing, without applying any patches. Regards, Harald -- - Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

simtrace February 2012