This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Osmocom BTS-side code (Abis, scheduling, ...)". The branch, master has been updated via d44f0772f9aac42f0444eac88ec7501e785ab4d8 (commit) from 3cc91746a3d93824e248c67dda3b69e2eec81281 (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-bts/commit/?id=d44f0772f9aac42f0444eac88ec7501… commit d44f0772f9aac42f0444eac88ec7501e785ab4d8 Author: Neels Hofmeyr <nhofmeyr(a)sysmocom.de> Date: Mon Aug 22 23:07:09 2016 +0200 dyn TS: if PCU is not connected, allow operation as TCH Before this patch, Osmocom style TCH/F_TCH/H_PDCH dyn TS were paralyzed if no PCU was running. The state of the dyn TS would lock up in the PDCH activation phase since the PCU never completed the process. Make more robust, i.e. don't concern the BSC with PDCH activation failures. This matches the way plain PDCH TS work: besides declaring the TS as PDCH, the BSC is not involved and is not told about errors. During PDCH deactivation, still wait for the PCU to tear down the PDTCH SAPIs, but in case no PCU is connected, send a rel ack right away. Thus, the BSC will happily switch Osmocom style dynamic timeslots to and from PDCH mode, using the dyn TS as voice channels as needed, and not caring about possible PDCH failures. GPRS starts working right away as soon as a PCU connects, regardless of dyn TS having been used for voice any number of times, and without another switchover needed. In detail: In rsl_rx_chan_activ(), upon receiving a PDCH activation, send an RSL chan act ack right away, unconditionally (with an explaining comment). Do not concern the Abis link with PDCH activation failures. Since we're acking right away now, drop the chan act ack that would follow after the PCU activation: as before dyn TS, only send acks and nacks for rel_act_kind == LCHAN_REL_ACT_RSL (PDCH runs as LCHAN_REL_ACT_PCU). In dyn_ts_pdch_release, indicate that the PCU is not connected by means of returning 1. In rsl_rx_rf_chan_rel(), use this indicator to send a rel ack right away if the PCU is not connected. Change-Id: I2a0b9730197786b99ff3bc1f08c75f7d279cb1f7 ----------------------------------------------------------------------- Summary of changes: src/common/rsl.c | 45 ++++++++++++++++++++++++++++++++++----------- 1 file changed, 34 insertions(+), 11 deletions(-) hooks/post-receive -- Osmocom BTS-side code (Abis, scheduling, ...)