This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "An utility library for Open Source Mobile Communications".

The branch, master has been updated via 267fd86e7da57719577c50039129654bd396c651 (commit) via 6cce3d71537cd9dc077c407d865b8b8ffe1ee77f (commit) via ca8dcb7bff9f9ed4cc52875a772246011e93cf31 (commit) via 36153dc61aa15f9c3084c2824c51356fc4babadb (commit) via 49ed9beed1a1f6df197defb295cf436b5eeb8933 (commit) via b61b2ca1a0c63d99c642fe46b0bfef83eb092ba1 (commit) from 4dafdefa7adaea9ca10b357ed966fdcd183347df (commit)

Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below.

- Log ----------------------------------------------------------------- http://cgit.osmocom.org/libosmocore/commit/?id=267fd86e7da57719577c500391296...

commit 267fd86e7da57719577c50039129654bd396c651 Author: Holger Hans Peter Freyther holger@moiji-mobile.com Date: Wed Mar 18 21:52:38 2015 +0100

libctrl: Include config.h so we can include netinet/tcp.h

In e15ac060e7ae78d4c3569d7fc9071bcf49807e05 we tried to fix the nuttx build but we never included "netinet/tcp.h" after it and the compiler warned about the unused "on" parameter which we didn't notice because of the other warnings...

Include config.h so we can see if there is a tcp.h and then include it.

http://cgit.osmocom.org/libosmocore/commit/?id=6cce3d71537cd9dc077c407d865b8...

commit 6cce3d71537cd9dc077c407d865b8b8ffe1ee77f Author: Holger Hans Peter Freyther holger@moiji-mobile.com Date: Wed Mar 18 21:35:56 2015 +0100

msgfile: Fix warning on BSDs stdio

msgfile.c:116:16: warning: implicit declaration of function 'getline' is invalid in C99 [-Wimplicit-function-declaration] while (getline(&line, &n, file) != -1) {

http://cgit.osmocom.org/libosmocore/commit/?id=ca8dcb7bff9f9ed4cc52875a77224...

commit ca8dcb7bff9f9ed4cc52875a772246011e93cf31 Author: Holger Hans Peter Freyther holger@moiji-mobile.com Date: Wed Mar 18 21:26:57 2015 +0100

gsm0808: Remove duplicate initialization

These types were compatible so simply remove one.

Fixes: gsm0808.c:323:37: warning: initializer overrides prior initialization CC gsm0480.lo of this subobject CC abis_nm.lo [-Winitializer-overrides] [GSM0808_IE_LSA_INFORMATION] = { TLV_TYPE_TLV }, ^~~~~~~~~~~~ gsm0808.c:316:36: note: previous initialization is here [GSM0808_IE_LSA_INFORMATION] = { TLV_TYPE_TLV }, ^~~~~~~~~~~~

http://cgit.osmocom.org/libosmocore/commit/?id=36153dc61aa15f9c3084c2824c513...

commit 36153dc61aa15f9c3084c2824c51356fc4babadb Author: Jacob Erlbeck jerlbeck@sysmocom.de Date: Tue Mar 17 10:21:17 2015 +0100

bssgp: Handle BSSGP STATUS messages

Currently incoming BSSGP STATUS messages are just logged and no other action is taken. This makes it impossible for higher layers to react to failures which are indicated by corresponding STATUS messages unless a timeout is triggered as a result of that failure later on.

This commit adds a bssgp_rx_status() function and calls it on incoming STATUS messages. That function logs a message, increments the new BSSGP_CTR_STATUS counter if the bctx context exists and invokes an NM_STATUS status indication. The latter will allow the application to handle failures immediately. Since all STATUS messages should be handled, the function is already called in bssgp_rcvmsg and the message is no longer handled in (and will not reach) bssgp_rx_sign and bssgp_rx_ptp.

Ticket: OW#1414 Sponsored-by: On-Waves ehf

http://cgit.osmocom.org/libosmocore/commit/?id=49ed9beed1a1f6df197defb295cf4...

commit 49ed9beed1a1f6df197defb295cf436b5eeb8933 Author: Jacob Erlbeck jerlbeck@sysmocom.de Date: Tue Mar 17 10:21:16 2015 +0100

bssgp: Don't reply with STATUS when receiving a PtP STATUS message

Currently each incoming PtP BSSGP STATUS message is handled as 'not yet implemented' and a BSSGP STATUS message (cause BSSGP_CAUSE_PROTO_ERR_UNSPEC) is sent back to the peer. This will cause endless messages loops if both peers use this BSSGP stack implementation. This does not apply to signalling messages.

This commit changes the implementation of bssgp_rx_ptp() to just do logging in this case.

Sponsored-by: On-Waves ehf

http://cgit.osmocom.org/libosmocore/commit/?id=b61b2ca1a0c63d99c642fe46b0bfe...

commit b61b2ca1a0c63d99c642fe46b0bfef83eb092ba1 Author: Jacob Erlbeck jerlbeck@sysmocom.de Date: Tue Mar 17 10:21:15 2015 +0100

logging: Implement subsecond resolution of extended timestamps

Currently when using 'logging print extended-timestamp 1', the subsecond part (milliseconds) of the printed timestamp is always 0. This makes it difficult to correlate log entries with PCAP file entries if there are many of them per second.

This patch changes _output in logging.c to use gettimeofday() instead of time() when extended timestamps are enabled and replaces the '000' by the milliseconds computed from tv_usec.

Sponsored-by: On-Waves ehf

-----------------------------------------------------------------------

Summary of changes: include/osmocom/gprs/gprs_bssgp.h | 2 + src/ctrl/control_if.c | 2 + src/gb/gprs_bssgp.c | 78 +++++++++++++++++++++++++++++++-------- src/gsm/gsm0808.c | 1 - src/logging.c | 11 ++++-- src/msgfile.c | 2 + tests/gb/gprs_bssgp_test.c | 35 ++++++++++++++++++ tests/gb/gprs_bssgp_test.ok | 4 ++ 8 files changed, 115 insertions(+), 20 deletions(-)

hooks/post-receive