This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Osmocom BTS-side code (Abis, scheduling, ...)". The branch, master has been updated via 70c4dc8d706973c65e6bf088156f5862f4e036b4 (commit) from be4a2088098a7b4fbfc1a5046e4c2ceb21ce1b1d (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/osmo-bts/commit/?id=70c4dc8d706973c65e6bf088156f586… commit 70c4dc8d706973c65e6bf088156f5862f4e036b4 Author: Harald Welte &lt;laforge(a)gnumonks.org&gt; Date: Sat Dec 2 21:34:33 2017 +0100 osmo-bts-trx: Fix reported frame number during PRIM_INFO_MEAS The upper layers (L1SAP, the common part of L1) *always* require frame numbers in the uplink direction to be reported as the frame number of the *first* burst, not the last burst of a given block. This is particularly important in the case of passing up measurement information, as we use this frame number to detect if the measurement interval for that specific timeslot has just ended (and hence we must process the measurements and send an uplink measurement report to the BSC. Before this patch, the measurement results were reported with the *last* frame number, which caused the common/measurement.c code never detect the end of a measurement window. On TS2, tons of the following log messages were observed: <0004> measurement.c:199 (bts=0,trx=0,ts=2,ss=0) no space for uplink measurement, num_ul_meas=104 With this patch, it behves as expected: the measurements of 25 blocks (= 100 bursts) are aggregated, after which point the report is computed and sent. Subsequently, num_ul_meas is reset to 0 and the cycle restarts. Related: OS#2329 Change-Id: I1065ae9c400bb5240a63ab8213aee59aeb9ceeff ----------------------------------------------------------------------- Summary of changes: src/osmo-bts-trx/scheduler_trx.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) hooks/post-receive -- Osmocom BTS-side code (Abis, scheduling, ...)