osmo-sip-connector.git annotated tag 1.1.0 created. 1.1.0

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "MNCC <-> SIP bridge". The annotated tag, 1.1.0 has been created at 8a11c83e8f4adf9dd797fe9eaef6de0ea67f8642 (tag) tagging 8706a688ff048a870eee26e9975056dddcbf5a85 (commit) replaces 0.0.1 tagged by Harald Welte on Sat Oct 28 18:24:38 2017 +0200 - Log ----------------------------------------------------------------- Release 1.1.0 on 2017-10-28 Harald Welte (3): Fix git-version-gen configure.ac: Depend on latest upstream libosmo-* Tag/Release Version 1.1.0 Holger Hans Peter Freyther (87): logging: Define default logging categories telnet: Use the dynamic interface for binding the VTY vty: Work on configuration of the MNCC to SIP gateway mncc: Add the protocol description from OpenBSC mncc: Add code to manage the mncc connection for CC sip: Introduce source file to setup sofia sip call: Introduce a structure for representing a call call/app: Hook the MNCC disconnect event in the app and release calls mncc: Handle the hello message from NITB mncc: Dispatch setup and issue rtp create in response then continue call: Add a backpointer from leg to call and drop the argument doc: Update with some requirements and limitations mncc: Add logging messages about the leg on all points mncc: Remember the IMSI as well mncc: Add a timeout when issuing a MNCC command call: Continue up to the point of call routing app: Release the call by releasing the initial request call: Re-order includes from local to osmocom to system call: Change to past tense and move code after the free mncc: Extract the RTP port information before continuing call/mncc: Set proceeding and deal with release based on this state mncc: Log commands in hex to find the name more easily in mncc_protocol.h mncc: In case of an unexpected REL.IND inform the other leg about it mncc: Handle disconnect and release the call mncc: Prepare alerting and and connecting the call mncc: Refactor and reduce some code clones for sanity checks mncc: Send RTP_CONNECT and verify connect result mncc: In case of a disconnect.ind inform the other leg sip: Tell sofia-sip that we will ack certain things ourselves sip: Implement MT call out to SIP app: Ask the sip side to create a leg Write down some of the limitations of the current setup app: Translate payload name to IETF codec name call: It is call_create and not sip_create sip: Mark call as MT call in preparation for incoming calls sip: Handle incoming message and screen the SDP file call: Create a call with a SIP leg sdp: Extract SDP traversing into a separate module sip: Actually return after having rejected the new call sip: Continue SIP->MNCC (MO or SIP Originated) implementation sip/app: Route call from SIP to MNCC and deal with the release sip: Refactor sdp file creation and implement alert+connect mncc: Begin to implement MT call handling for SIP->MNCC mncc: On timeout release the other leg as well mncc: Stop timer when starting the release process mncc: Handle REJ_IND from the NITB mncc: Convert ip address so BTS sends it to the right place mncc: Introduce direction and start to handle it separetely sip: Pass to not enable media on our 200 response mncc: Add handling to connect a MNCC MT call sip/sdp: Hack to get a GSM codec call connected debian: Initial packaging of the osmo-sip-connector coverity: Address two issues found by coverity debian: Add dh-autoreconf required by the debian packaging app/mncc: Add "use-imsi" to allow calling by IMSI mncc: Only copy 15 chars to leave the last one as NULL mncc: Have all release go through a local method mncc: Reject hold requests for now mncc: Use snprintf correctly create format specifier vty: Add simple VTY output for current calls vty: Fix the number of documented arguments sip/call/mncc: Move source/dest into the call structure vty: Add extended show calls command with all information mncc: Use strcpy for these routines and not memcpy vty: Add VTY command about the state of the mncc connection jenkins: Add first CI script for the SIP connector distcheck/tests: Add the referenced osmoappdesc.py for testing distcheck: Package the logging.h file as well jenkins: Try to enable the vty tests as well jenkins: Use separate check invocation tor un the tests jenkins: Make it find the libosmocore library as well sip: Start the application even if sofia-sip is broken sip: Treat SIP 183 as progress too evpoll: Use {} in the middle of the if/else if/else block evpoll: Always initialize revents for the output evpoll: Don't try to be more smart than g_poll contrib: Add Dockerfile to build and configure a FreeSWITCH call: Fix call release handling on mncc connection loss mncc: Fix use after free on mncc socket disconnection evpoll: Add workaround for usage of IP_RECVERR in sofia-sip dtmf: Start handling the DTMF MNCC messages and respond testpbx: Enable GSM and AMR as codecs to actually be relevant sip: Actually honor the remote port of the pbx testpbx: Add another number that will just play a ringback dtmf: Forward DTMF from MNCC to SIP mncc: Enable in-band signalling for early media mncc/sip: Attempt to parse the media from session in progress Keith (1): sdp.c Send octet-align in fmtp Max (3): Add git review config Use release helper from libosmocore Fix build after recent libosmocore update Neels Hofmeyr (7): log VTY telnet bind only once build: be robust against install-sh files above the root dir configure: check for pkg-config presence jenkins.sh: use osmo-build-dep.sh, log test failures jenkins: add value_string termination check vty: install default commands for SIP,MNCC,APP_NODE jenkins: use osmo-clean-workspace.sh before and after build ----------------------------------------------------------------------- hooks/post-receive -- MNCC <-> SIP bridge