openbsc.git annotated tag 1.0.0 created. 1.0.0

This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Legacy: The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)". The annotated tag, 1.0.0 has been created at df6d66c572f54e130232881837e57df71ca50be9 (tag) tagging 577c268b96f555587b2c621d48d85a30a76cf7cf (commit) replaces 0.15.0 tagged by Harald Welte on Sat Oct 28 21:33:21 2017 +0200 - Log ----------------------------------------------------------------- Tag 1.0.0 on 2017-10-28 Alexander Chemeris (3): utils: 'meas_json' utility to convert measurement feed into a JSON feed. libmsc: Fix VTY output for handover counters. libcommon: Fix log output for bts>0. Alexander Couzens (36): add .gitreview gprs: use new uint8_t * for kv in gprs_cipher_run() libbsc: skip channel state LCHAN_S_INACTIVE while handover gprs_gmm: remove duplicated start of T3395 bs11_config: add brackets to fix warning in argument parsing sgsn: add statistics counter for GPRS and PDP packets sgsn: add statistics counter for LLC packets libbsc/libmsc: convert old osmo counter into rate_ctrgs libmsc: add missing count of sms no receiver when using smpp_first libmsc/bsc: split rate counters into bsc and msc group bsc/netinit: correct mistyped rate counter gprs/gsm0408_gprs_force_reattach_oldmsg: check llme before use gprs/gprs_llc: fix null pointer deref in gprs_llc_rcvmsg sms: change rp err cause of smpp_try_deliver errors bts: extend bts_chan_load to allow counting tch only bsc: count the usage of codec by setting the lchan active msc: add counters to track call attempts/active/success/failed gprs/gprs_llc: count UI frames over SAPI in the statistics fix mistypes, spaces and tabs bsc: count the usage of codec by setting the lchan active gprs/sgsn: rename gprs->mm_state -> gmm_state gprs/sgsn: rename sgsn_mm_ctx_alloc() -> sgsn_mm_ctx_alloc_gb() gprs/gprs_mm: add value_strings for PMM & MM states gprs/sgsn_mm_ctx_alloc(): initialize MM state to IDLE gprs/sgsn_vty: fix typo in comment libmsc/update_db_revision_3(): free memleaking db result unixsocket: start sabm for UNIXSOCKET gprs_sgsn.c: initialize ptmsi with 0xdeadbeef libbsc: add chreq type for CHREQ_T_PDCH_ONE_PHASE & CHREQ_T_PDCH_TWO_PHASE abis_om2k: protect MO FSMs by NULL check libbsc: add rsl_ericsson_imm_assign_cmd() which reply with a confirmation message pcu_sock: set flag PCU_IF_FLAG_SYSMO by setting pcu_direct = 1 pcu_sock: pcu_tx_info_ind allow to use TRX not starting from 0 pcu_sock: implement direct tlli on AGCH abis_rsl: fix off-by-one length check when parsing ericson tlli field abis_rsl: use msgb_pull to parse tlli from msg Alexander Huemer (6): tests/oap: depend on libgtp tests/abis: fix format specifiers gprs: use libgtp cflags Consistenly format variables in */Makefile.am files Build fixes Add missing _CFLAGS and _LIBS Andreas Eversberg (2): dyn PDCH: Fix free slot search for chan_alloc_reverse == true dyn PDCH: Automatically deactivate/activate PDCH on TCH/F+PDCH channel André Boddenberg (1): Make use of osmo-build.sh to use dependency artifacts for builds. Benoit Bolsee (3): smpp: fix return cause 04.08: find a portable way to obtain the timezone offset transaction: reject calls from unidentified subscribers Daniel Willmann (28): gprs: Use RAND_bytes for p-tmsi gbproxy/test: Add and call cleanup_test function gprs/gb_proxy: Use RAND_bytes for gbproxy TLLI/TMSI allocation rename enum gprs_mm_state to gprs_gmm_state rename enum gprs_mm_state to gprs_gmm_state create_pdp_conf(): factor out PDP context accept dispatch as send_act_pdp_cont_acc() sgsn_mm_ctx_cleanup_free(): clean up LLME iff present (Gb, not Iu) gprs: more conditionals for Gb specific actions configure.ac: add --enable-iu with deps asn1c, ranap, sigtran add DRANAP debug constant add DSUA debug constant osmux: Add negotiation state so race conditions can't disable osmux gprs_gmm: Fix bit mask when determining update/attach type IuPS: track msg->dst aka ue_conn_ctx, comment IuPS: osmo-sgsn: add core IuPS impl, call iu_init() IuPS: redirect Iu in various places, link Iu in sgsn-test IuPS: add Iu response to create_pdp_conf() IuPS: add Iu response to delete_pdp_conf() IuPS: dev hack: init hardcoded Ki on ATT REQ IuPS: send Security Mode Command, track the new_key flag. IuPS: add GMM Service Request rx and tx IuPS: RA UPD: make sure to authorize, for Iu Integrity Protection IuPS: sgsn_mm_ctx: add enum gprs_pmm_state field, track PMM state IuPS: GMM Attach: reset MM ctx pending_req IuPS: Introduce function to change PMM state IuPS: Change GTP-U endpoint to SGSN in PMM_IDLE and page UE when data arrives gbproxy: Check whether gbproxy_update_link_state_after() deletes the link_info test/gbproxy: Test for possible memory corruption when link_info is freed Dieter Spaar (1): SGSN: fix FCS calculation for encrypted frames Harald Welte (134): SGSN: Fix typo in VTY license statement. meas_db.c: fix compiler warnings Depend on libgtp >= 0.92, as previous versions don't have gtpie.h installed oap and gtphub tests must only be compiled of LIBGTP is present! Fix TSC/BSIC handling bug and remove bts->tsc vty: Print NCC/BCC and not just integer value of BSIC Fix compilation with no libc-ares present on the system tests/smpp: Fix linking order gsm_data_shared: compute/sprintf the lchan name only once remove old obsolete linux kernel and wireshark patches AUTHORS: Add Jacob and Neels bring the README into the 21st century mncc.c: Convert mncc_names[] to 'struct value_string' mncc: introduce 'struct gsm_mncc_bridge' for MNCC_BRIDGE indicate the GSM 04.08 channel mode in 'show lchan' add DOT graph showing NITB data structures and their references rename ipaccess-find into abisip-find Revert "move to hex TMSI representation" Start to use struct osmo_auth_vector from gsm_auth_tuple move gsm_04_08_gprs.h to libosmocore use new libosmocore gsm_23_003.h for IMEI/IMSI length Rename gprs_gsup_* to osmo_gsup_* rename gprs_shift_*() to osmo_shift_*() move osmo_shift_* / osmo_match_shift_* to libosmogsm gsup_messages: Add UMTS AKA related encoding/decoding support osmo_gsup_messge.[ch] documentation update (doxygen) move utils.h functions to libosmocore Move osmo_gsup_messages.[ch] to libosmocore oap_message.h: Remove dependency to openbsc include OAP: use osmo_oap_ prefix for OAP, rather than plain oap_ OAP: Various coding style fixes osmo_oap_decode(): Use common argument ordering sgsn/GSUP: Support MAP-style nested LU/ISD Add human-readable name of SGSN_AUTH_AUTHENTICATE sgsn_test: Adapt test case to now-existing InsertSubscriberData subscr_name(): Handle case for subscr == NULL rtp_proxy.c: Ensure msgb_alloc is large enough for largest AMR frame Merge "add .gitreview" Merge "rename enum gprs_mm_state to gprs_gmm_state" prepare sgsn_mm_ctx for Gb and Iu mode (UMTS) rename gsm0408_gprs_rcvmsg() to gsm0408_gprs_rcvmsg_gb() gprs_gmm.c: Make TLLI handling specific to Gb interface gprs_gmm.c: Perform LLME operations only if we have one remove old copy of documentation that now is in osmo-gsm-manuals.git add example config for sysmobts add .mailmap file for mapping git author name/mail in shortlog osmo-nitb: generate backtrace on SIGABRT COSMETIC: 'if' is not a function, so there is space before '(' mncc_builtin: Properly reject DTMF WIP: OM2000: Full state machine implementation using osmo_fsm OM2000: Fix state machien for CF/TRXC on START Result SGSN: Use dummy all-zero MSISDN value in PDP Context Act on GTP RBS2000: re-establish any lost signalling links talloc_cxt: Fix compiler warning / missing #include bs11_config: remove compiler waring about unused variable RBS2000: Avoid segfault if ts->lapd instance doesn't exist RBS2000: Ensure the is-connection-list command is only used on RBS2000 Support configuration of CON MO Groups/Paths from VTY OM2000: CON MO: Allow larger range for CCP and CI values OM2000: Add three IEs to TCH activation about which we have no clue OM2000: Fix missing dynamic TCH initialization abis_nm: Fix possible not-null-terminated buffer abis_nm: Fix non-null terminated buffer libmsc/db: avoid subscr->name without terminating NULL char Fix possible non-null-terminated buffer ipaccess-config: Handle setsockopt return value ipaccess-proxy: Check setsockopt() return value abis_nm: ceck fseek() return code in is_last_line() bsc_msc.c: Check setsockopt() return value sgsn_test: Fix missing = in == type check abisip-find: check bsc_fd_register() result bsc_ctrl: Ensure we don't pass NULL string into strtok_r() mgcp_protocol: Ensure we don't call strtok_r with NULL data cfg_bts_si2quater_neigh_add(): Don't call strerror() on negative value gsm0408_test.c: Don't pass negative value to strerror() channel_mode_from_lchan(): Add missing break statement add gsup_test_client program move OAP messages implementations to libosmocore bsc_vty: Fix missing break statements in switch() sgsn: Add GTP information to "show pdp-context" remove unused struct members of 'struct sgsn_pdp_ctx' Implement VTY configuration to control Early Classmark Sending OM2000: use assoc_so *only* for TS objects VTY: Print 3G auth tuples, not just 2G auth tuples OM2000: Add FIXME comments for missing resolving of RX/TX MO! OM2000: Change the order of MO initialization OM2000: Send ALTCRQ for SuperChannel after receiving IS Enable Req Ack RBS2000: Add the P-GSL Timer IE to RSL CHAN ACT for PDCH RBS2000 RSL: Support for sending RSL PAGING CMD for GPRS pcu_sock: Don't re-implement core functionality like gsm_bts_trx_num() pcu_sock: get rid of magic numbers and use ARRAY_SIZE() for array iteration pcu_sock: Forward paging request from PCU via RSL to BTS pcu_sock: Send non-NULL hLayer1 to PCU Use new e1inp_signal_names from libosmo-abis to print input signal names costmetic: Document gsm48_multirate_config() + const-ify input bsc_api.c: Documentation for handle_mr_config() bsc_vty: Factor vty_get_ts() out of pdch_act_cmd() bsc_vty.c: Further simplify vty_get_ts() bsc_vty.c: Add command for manual [de]actiovation of logical channels bsc_vty: Add command to manually issue IPAC MDCX libbsc: Create pcu-socket only as specified in config file don't re-implement osmo_talloc_replace_string() Add vty command "radio-link-timeout infinite" for uplink rx testing jenkins.sh: Proper error message if local environment isn't set up Support for TS 04.14 conformance test commands Add VTY commands for experimentation with TS 04.14 commands bsc_api: Fix copy+paste error in printing name of RR STATUS PDU libbsc: Add VTY command to re-send the SYSTEM INFORMATION to BTS check for missing result of rate_ctr_group_alloc() Fix regression causing loss of static system-information messages RSL: Allow disabling of BCCH/SACCH filling for given SI type gsm_bts_trx_set_system_infos(): Disable non-existing SI gtphob: check for missing result of rate_ctr_group_alloc() bsc_vty: Add VTY command to test CTRL TRAP feature GSM timers: User reasonable defaults; don't save if equal default bsc_vty: Don't allow timers of zero (0) remove code disabling T3109 if configured to 0 SGSN: Fix RAN information exposed on GTP during PDP CTX CREATE Fix gsm_pchan2chan_nr() to use RSL_CHAN_OSMO_PDCH sgsn_vty: Don't assume pdp->lib is always valid Migrate from gprs_apn_to_str() to libosmocore osmo_apn_to_str() increase libsmpp34 version requirement to 1.12 NITB: remove 'help' output about '-a' option that is removed for ages Treat SIGTERM just like SIGINT in our programs Use verify_value_string_arrays_are_terminated from osmo-ci libbsc: document arguments of generate_bcch_chan_list() Make sure BA-IND in all SI2xxx is '0' and in all SI5xxx is '1' gsm0408_test: Verify that BA-IND is 0 in SI2xxx and 1 in SI5xxx Fix nanobts_omlattr unit test nanobts_omlattra_test: Initialize logging before executing tests osmo-bsc: Initialize logging before initializing rate_ctr remove sgsn, gbproxy and gtphub from openbsc.git rename osmo-bsc to osmo-bsc-sccplite Tag/Release Version 1.0.0 Holger Hans Peter Freyther (46): Revert "gprs: Use RAND_bytes for p-tmsi" sgsn: Fix pattern for too long msisdn osmux: Allow to listen to a specific address sgsn: Fix up the VTY doc strings stats/mgcp: Initialize the statistics for MGCP as well gbproxy: Count more GSM 04.08 messages gtp: Fix Makefile.am so maybe distcheck is now going to work gtphub: Fix the VTY prompt to make the tests move forward bsc/vty: Provide a hint of available input gtphub: Fix compilation using gcc5 dahdi: The driver has moved to libosmo-abis gtphub: Make the two setter static as well db: Avoid undefined behavior when copying cm2/cm3 from the db gtphub: Fix use after free on failure gsm0408: Provide unique strings for the gsm 04.08 message msc: Remove oversimplified todo entry and add a comment Merge branch 'jerlbeck/fixes/sgsn' meas: Do not retry to close the database mgcp: Fix compiler warnings on size_t on AMD64 abis: Send the message without enforcing to wait for a response bsc: Add code to send ip.access reboot command to nanoBTS bsc: Add parameter to restart a bts subscr: Add testcase creating an already created subscriber subscr: Make db_create_subscriber fail on duplicates db: If creating a subscriber in the db fails, return NULL ctrl: Extend ctrl command to optionally handle alg+ki jenkins: Add the build script from jenkins here nat/vty: Don't assume one can magically add IPv4 addresses to lo nat/vty: Use different port for the mock MSC nat/vty: Convert into str for the VTY command nat/vty: And move to a different port.. nat/vty: Remove second assumption about lo and binding nat/vty: Fix construct not working with python 2.6 nat/vty: Do not print token update statement nat/ussd: Add an example of the USSD gateway side-channel debian: Make upgrading from debian SID easier filter/nat: Fix the context for the imsi assignment bsc: Create minimal SI6 rest octets ci: Attempt to disable doxygen warnings of dependencies lchan: Release channel in case of late activation ack ussd: Add band-aid for interrogationSS debian: Install header and source file to different directory debian: Require libgtp-dev after the SO version bump sgsn: Fix deeply flawed copying logic for PDP context activation sgsn: Fill the cch_pdp with a value coming from the tlv structure sgsn: Convert cch_pdp to host order for libgtp Ivan Kluchnikov (2): handover_logic: set correct link to bts for subscriber_connection in case of moving this connection to another bts handover_decision: Fix condition for power budget handover attempt Jacob Erlbeck (11): sgsn/test: Add and call cleanup_test function sgsn/test: Really parse received DL LLC messages stats: Enable stats for sgsn, gbproxy, nitb, bsc, nat stats: Set class_id in rate_ctr group descriptions sgsn: Remove tlli_foreign2local sgsn/test: Add bssgp_raid parameter to send_0408_message sgsn: Make ra_id_equals available as gprs_ra_id_equals sgsn: Only look at TLLIs in sgsn_mm_ctx_by_tlli sgsn: Change handling of missing mmctx in gsm48_rx_gmm_ra_upd_req sgsn/test: Add test case test_gmm_routing_areas sgsn: Re-add searching for MM ctx based on TLLI / P-TMSI matches Keith (8): Pass actual smpp_avail_status through to smpp in alert_all_esme() Add VTY command to immediately expire user (set expire_lu to now) meas_json: fix NEIGH: missing array braces libmsc: Map SMPP command status to GSM 04.11 cause LIBMSC: Place correct dst address in status report LIBMSC: Use sms->text, not sms->user_data to construct report body libmsc: Use actual delivery time in delivery reports. libmsc: Log Rx DELIVER-SM RESP before calling gsm411_send_rp_ack Martin Hauke (2): Fix no-return-in-nonvoid-function meas_vis.c Fix Warning: openbsc implicit-pointer-decl meas_udp2db.c:50 Max Suraev (140): Ignore vty test byproducts Fix segfault with broken config NAT: vty command to display number of BSCs NAT: extend debug output for ipaccess errors Remove trivial wrapper function NAT: allow allocating BSC in arbitrary order vty_test_runner: update ipa sending code NAT: move BSC config into separate file NAT: reload BSCs config dynamically Add SI2quater support to SI3 Refactor SI-related code Add basic SI2quater support Fix documentation for command parameters Fix earfcn deletion Cleanup shared data structure Add basic UARFCN support Add vty check for max si2quater size Add extra debug output with channel mode and type Add missing include Fix comment typo Adjust si2quater ranges Disconnect calls with incompatible channel types / modes Ignore extended test leftovers Cleanup db test Move DTX settings to BTS Use proper measurement for handover Make extending subscriber creation easier Fix copy-paste error in SI6 Make si2q scheduling optional Store last used FN for TCH Add regexp authorization policy for IMSI Add warning for unsupported DTX configurations Add DTXd indicator to gsm_lchan DTX: add data necessary for scheduling Add talkspurt indicator for gsm_lchan Fix SIGABRT on wrong AMR payload Make random extension range configurable Fix vty tests with subscriber deletion SGSN: force GSUP CN domain to PS SGSN: add vty config for choosing GPRS encryption SGSN: move TLLI unassignment into separate function Make random MSISDN assignment optional SGSN: prevent starting with inconsistent config SGSN: use unique AUTH REQ reference SGSN: split GEA key management from TLLI SGSN: add preliminary support for GPRS encryption SGSN: encrypt/decrypt only necessary frames SGSN: move cipher application to separate function Fix default subscriber regexp Improve code re-use Use random operation id Add python functions to get/set ctrl variables Add web proxy for control interface Modify SI 13 field for control_ack_type DTX: extend SID cache DTX: add flag for AMR HR P* DTX DL: use FSM for AMR Log use of incompatible BS-AG-BLKS-RES value Replace magic number with define DTX DL: Add FACCH cache Decrease count_codecs logging verbosity abisip-find: use protocol constant Replace duplicated code with macro call Add IPA multiplex Use IPA module for vty tests Add twisted-based IPA multiplex bsc_control.py: style corrections bsc_control.py: use ipa.py module bsc_control.py: remove unused -i option Improve GPRS logging Integrate Debian packaging changes Cosmetic fixes around SI generation Turn some warnings into errors Log expected SRES on GPRS AUTH REJECT Turn some compiler warnings into errors Print subcriber when skipping auth Improve OML failure report bsc_control.py: fix blocking Prevent segfault in range encoding SI2q: add support for multiple UARFCNs CTRL: remove boilerplate Remove dependency to autoconf-archive Attempt to fix nightly builds vty: remove ignored logging parameters Expand chan allocation logging Remove duplicating define Add support for extended SI2q parameters Handle DSD from HLR Fix potential segfault in sgsn_libgtp.c Add MS time. offset to gsm_lchan examples: remove logging level * everything Don't drop OML links for Get Attributes NACK twisted_ipa.py: bump version properly twisted_ipa.py: make debug logging more robust Add simple CTRL2SOAP proxy Handle PCU version received via OML alert python: fix Null logger abis: log known ACKs and unknown messages gsm_bts: add version and variant details Fix MS TO measurement representation Remove libs from openbsc.pc gbproxy: add example .service deb: install openbsc.pc Save PCU version reported by BTS Prepare for extended SI2quater support Add gsm_bts_type_variant to gsm_bts struct Make pcap dependency optional Fix vty warnings for GEA0 ctrl: remove boilerplate code deb: install python scripts from contrib/ Gb: use textual representation for parse log Use ipa.py for ctrl tests Use libosmocore for SW Description parsing Make BTS type and variant converters shareable Add forgotten items to .gitignore Use define for limit on number of BTS features Prepare for BTS attribute reporting via OML Restructure SI2quater generation SI2quater: fix EARFCN inclusion check Get basic BTS attributes Remove errorneous include Adjust BTS model feature check Add remote BTS feature storage and helpers Get TRX attributes Request and parse BTS feature list via OML OML: fix potential OOB memory access Move SI-related defines Update SI data structures and generation bsc_init: Forget which SIs are valid for the trx Fix BTS features length check Enable optional static builds Fix BTS attribute requests gbproxy: log unhandled BSSGP PDU as text gbproxy: log signal value as text Remove common_cs.h from .deb Use release helper from libosmocore SI13: drop PBCCH-related bits CTRL: cleanup write-only command functions Show OML link uptime in vty Make TRX rf locking more visible Minh-Quang Nguyen (1): rsl: Fix dropping of LAPDm UA message. Neels Hofmeyr (386): libcommon: soak up three static functions. oap: implement initial OAP API. oap: add oap testsuite skeleton oap: add OAP API test gsup/oap: add OAP to GSUP client. oap: add OAP config to VTY sgsn_vty.c: fix typo Add GTP hub initial code base. gtphub: add first bits of GRX ares gtphub: fix Echo behavior: respond directly. gtphub: add/fix IMSI and APN IE error handling gtphub: make test code reusable for future tests. gtphub: fix User plane decoding, add unit test. gtphub: fix handling of sender from nonstandard port. gtphub: Add logging for ares queries. gtphub: fix numerous segfaults, and other stupidities. gtphub: don't always try to do GGSN resolution. gtphub: add logging labels to bind struct. gtphub: review log levels, add level arg to LOG(). gtphub: cosmetic: break long lines. fix build: remove obsolete gtphub EXTRA_DIST. gtphub: fix gtphub_read() semantics. gtphub: fix fatal log msg for SGSN proxy. gtphub: fix three oversights (thanks to coverity). gtphub: fix echo reply to SGSNs: wrong fd. Add test. gtphub: lose obsolete comment. gtphub: fix ares segfault: add missing initialization. gtphub: add enable_gtphub_test to atlocal.in. gtphub: remove another obsolete comment. gtphub_test: build only when c-ares and gtp are present. gtphub: add to debian build gtphub: add to osmoappdesc.py gtphub: fix number map range for TEIs. gtphub: nr_map: add min,max and wrap. gtphub: cosmetic: rename a file. gtphub: review some logging. gtphub: ares vty and init gtphub: ensure cleanup of peer addresses. gtphub: add explicit cleanup handles. gtphub: cosmetic: clarify bind pointer naming. gtphub: add first rate counters gtphub: first vty show commands. gtphub: cosmetic: fix an argument name. gtphub: move timestamp into packet struct. gtphub: cosmetic/prepare: add nr_map_refresh(). gtphub: add assertion to ensure expiry ordering. gtphub: cosmetic/prepare: rename expiry queues. gtphub: track tunnels explicitly. gtphub: avoid segfault for incomplete tunnels. gtphub: fix a conditional for log output gtphub: complain about excess cmdline args. gtphub: implement restart counter properly. gtphub: cosmetic: for_each_side,_plane macros. gtphub: use a single TEI pool across planes. gtphub: make sure mapped TEIs aren't occupied (incomplete). gtphub: refactor: use side_idx everywhere. gtphub: vty: add missing SGSN-proxy output. gtphub: add two stubs for Delete PDP msgs gtphub: fix some style complaints from cppcheck gtphub: be more fatal about not finding an unused TEI. gtphub: fix segfault when empty config. gtphub: remove obsolete todo comment gtphub: handle Delete PDP Context. gtphub_test: add some cleanup asserts. gtphub_test: add test for Del PDP from GGSN side. gtphub: cosmetic gtphub: monitor GSNs' restart counters. gtphub: cosmetic: early continue for less indent gtphub: fix: add a missing NULL check gtphub: add test for reused TEI. gtphub: Add a debug log gtphub: add restart counter test gtphub: fix use after free. gtphub: wrap gtphub_write() for test suite. gtphub: fix restart cleanup peer matching. gtphub: cosmetic gtphub: improve logging for invalid packet gtphub: check TEI presence in Create PDP Ctx Response tests: fix condition to run sgsn, oap, gtphub tests gtphub: Del PDP: replace unnecessary lookup with asserts. gtphub: tweak an error log message gtphub: prepare: keep tunnel ref in gtp_packet_desc. gtphub: implement sgsn_use_sender for NAT. gtphub_test: tweak test_user_data(): no seq routing. gtphub: add test for SGSN behind NAT gtphub: tweak startup log for sgsn_use_sender gtphub: add gtphub-example.txt gtphub: enhance gtphub-example.txt gtphub: fix missing newline in log output gtphub: logging: have one newline per log. gtphub: tweak logging. gtphub: be strict about unknown cmdline args gtphub: add more detailed I/O rate counters. gtphub: log: add side str to msg for reused TEI gtphub_test: add test_parallel_context_creation() gtphub: log: add TEI reuse msg, fix another TEI msg. gtphub: fix: when checking TEIs, skip 0. gtphub: simplify/fix: one TEI mapping per tunnel. gtphub: log most common message type names. gtphub: improve handling of restarted peer. gtphub: add VTY show for peers and peer stats. gtphub: log: limit length of hex dumps. osmoappdesc.py: fix wrong index introduced by gtphub. gtphub VTY test: use only 127.0.0.1. gtphub VTY: fix doc strings for show cmds gtphub VTY: add newlines to some VTY docs' final lines fix bsc_vty out: timeslot indented too deeply. remove src/libgb/Makefile.am Add README.vty-tests openbsc/README: some fixes, add CSCN and Iu* gtphub: include ports.h instead of redefining OSMO_VTY_PORT_GTPHUB gtphub: tweak default logging level osmo-bsc: fix checking wrong pointer for ctrl setup success minor fixes in bsc_vty.c and bsc_nat.c bsc_nat: fail if VTY telnet port cannot be bound, clarify comment ipaccess_rcvmsg: fix returncode, add partial write warning gsm340_rx_tpdu: comment-out two unused vars enable telnet VTY bind address config for various programs osmo-nitb: add -M to pass specific MNCC socket path osmo-nitb: cosmetic: rename to rf_ctrl_path, following mncc_sock_path osmo-nitb: be strict about cmdline args enable ctrl bind config for various programs smpp: refactor initialization, add bind address bsc_test.c: fix tz.override val and note a FIXME osmo_bsc_filter.c: add fixme note minor comment use sqlite3_close() instead of sqlite3_close_v2() check return value of sqlite3_close(), retry up to three times. db: evaluate return value of sqlite3_finalize(), tweak log output. channel_test: don't segfault if paging fails 04.08: apply new bitmask functions, fix bitmask use 04.08: apply new transaction id inline functions bsc_scan_msc_msg: check protocol discriminator fix confusing typo in constant (THAN -> THEN) osmo-bsc: fix compiler warning: store struct in vty->index Add MM Auth test; add auth_action_str() function MM Auth test: add two tests for AUTH_THEN_CIPH MM Auth test: add test to re-use existing auth MM Auth: introduce AUTH_ERROR constant. MM Auth: return AUTH_NOT_AVAIL instead of hardcoded zero Fix MM Auth: disallow key_seq mismatch Fix MM Auth: zero-initialize auth tuple before first use gtphub_unmap_header_tei(): don't dereference unmapped_tei arg if not present (CID #57687) bsc_nat: forward_sccp_to_msc(): assert con presence (CID #57872) gbproxy_test: assert msg allocation (CID #57873) drop unneccessary duplicate linking: osmo-bsc drop unneccessary duplicate/unused linking: ipaccess drop unneccessary duplicate linking: osmo-nitb drop unneccessary duplicate linking: tests/gsm0408 gsm04_08_clear_request(): release loc with arg release=0 tweak db debug log: log TMSI as hex gprs_gmm.c: Don't try to de-reference NULL mmctx comment tweak for bsc_handover_start() debug log: cosmetic fixes gprs_gmm.c: don't transmit NOTEXIST when mmctx is NULL lchan_alloc(): on alloc failure, report original type dyn PDCH: allow allocating TCH/F on TCH/F_PDCH slots dyn PDCH: send PDCH ACT for each TCH/F_PDCH on TS Enable dyn PDCH: TS flags: rename one, add three, as enum dyn PDCH: fix: clear PDCH flags on TS reconnect (e.g. BTS re-connect) dyn PDCH: track pending PDCH de-/activation dyn PDCH: add lchan sanity checks in PDCH DE/ACT ACK dyn PDCH: set lchan->state after PDCH DEACT / before PDCH ACT bsc_version.c: update copyright date, add contributor configure: require libgsm for --enable-mgcp-transcoding rm dup: use channel type names from libosmocore typo in sgsn_test dyn PDCH: enable PDCH only after release due to error vty: show lchan summary: also show lchan->state debug log: log all lchan state transitions dyn PDCH: cosmetic: clarify lchan rel with assertion and comment err log: tweak dyn pdch ack error logging jenkins.sh: remove code dup jenkins.sh: add --enable-iu matrix build cosmetic: dyn_pdch_init(): flatten if-logic, add comments dyn pdch: don't PDCH ACT if gprs mode is none fix ctrl test: dyn TS: use new GSM_PCHAN_TCH_F_TCH_H_PDCH fix: create_pdp_conf(): unset reject_cause after unknown ran_type comments: clarify some dynamic TS comments cosmetic: rsl_rx_rf_chan_rel_ack(): use local ts var for brevity cosmetic: act lchan type: use constant instead of 0x00 cosmetic: rsl_rx_chan_act_ack(): use local lchan var in 14 instances dyn TS: add ts->dyn state gsm_data_shared: add gsm_ts_and_pchan_name() for dyn ts logging code dup: join [rsl_]lchan_lookup() from libbsc and osmo-bts error log: abis_rsl.c: log errors in channel_mode_from_lchan() log lchan_alloc() result debug log: fix line endings for abis_rsl_rx_rll logging gsm_ts2chan_nr(): add assertions for lchan_nr cosmetic: dyn_pdch_init(): debug log: use new gsm_ts_and_pchan_name() error log: rsl_chan_activate_lchan: log channel mode error prepare dyn TS: act lchan: fetch the channel mode a bit later dyn TS: rename lchan->dyn_pdch to lchan->dyn dyn TS: gsm_lchan2chan_nr(): decouple from ts->pchan dyn TS: rsl *2chan_nr(): handle TCH/F_TCH/H_PDCH dyn TS: verify_chan_comb(): handle new dyn TS NM_CHANC_* dyn TS: rsl_lchan_lookup(): add dyn PCHAN dyn TS: enhance channel allocator for dynamic TS dyn TS: chan act: set chan_nr according to dyn pchan type dyn TS: implement pchan switchover logic dyn TS: split dyn_pdch_init() for new dyn type and rename dyn TS: Rename bsc_dyn_pdch.c to bsc_dyn_ts.c dyn TS: OS#1778 workaround: disable TCH/F on dyn TS for nitb gsm_pchan2chan_nr: disable a chan_nr assert in BTS, to not break octphy gsm_pchan2chan_nr(): fix uninitialized cbits comment: gsm48_gmm_sendmsg(): add spec reference on encryptable dyn TS: bts_chan_load: use correct nr of subslots for dyn ts chan_alloc.c: use ts_subslots() instead of subslots_per_pchan[] move ts_sublots() to gsm_data_shared.c, it will be used by osmo-bts dyn TS: move check whether to switch to PDCH to separate function dyn TS: fix error recovery: switch to PDCH after lchan error state dyn TS: clearly use lchan[0], fixing minor confusion dyn TS: fix: properly run an lchan activation timeout dyn TS: fix OS#1798: on late RF CHAN REL ACK, activate PDCH dyn TS: debug log 'switchover complete' only when there was a switchover dyn TS: debug log: if still in use, also log lchan type and state log: improve for rsl_lchan_mark_broken() log: rsl notice: tiny tweak for readability add libiu cosmetic: gprs_sgsn.c: move pdp.h include to top IuPS: add VTY config for asn_debug log: abis_rsl: don't log 'error' when there is no error log causing rx event for lchan_lookup errors properly #include <openbsc/gsm_data.h> from gsm_subscriber.h remove unused bsc_copyright from bsc_vty.c vty l3 help: fix typo 'comamnds'; fix english s/his// utils/Makefile.am: remove unused LIBOSMOVTY_CFLAGS cosmetic: various comment, whitespace tweaks Sanity fixes for gsm0408_dispatch(): rc, assertions debug log for sms: fix/add cosmetic: transaction.h: 1 comment typo, 1 whitespace cosmetic fixes in libcommon/talloc_ctx.c mscsplit: bsc_init: don't pass telnet dummy conn mscsplit: move subscriber conns list into struct gsm_network mscsplit: gsm_network_init(): add explicit root talloc ctx mscsplit: talloc_ctx_init(): decouple from global tall_bsc_ctx mscsplit: bsc_vty_init(): decouple from global bsc_gsmnet mscsplit: abis vty: decouple from global bsc_gsmnet variable mscsplit: add gsm_network backpointer to gsm_subscriber_connection mscsplit: directly access gsm_network backpointer from gsm_subscriber_connection cosmetic: vty_test_runner.py: add comment for vim auto settings vty_test_runner.py: raise exception when MSC socket connection fails log VTY telnet bind only once cosmetic: comment typo on e1_config.c channel test: prepare to add another test function channel_test: test nr of subslots for dyn pchan, with error Revert "bts: extend bts_chan_load to allow counting tch only" dyn TS: fix: ts_subslots() for TCH/F_PDCH in PDCH mode dyn TS: fix: abis_om2000: also handle dyn TS as TCH dyn TS: fix: e1_config.c: switch(pchan) for dyn TS cosmetic: bs11: also use ts_is_tch() vty_test_runner.py: fix nat_msc_test(): socket attach: reduce timeout, retry fix: send SNDCP XID only on GERAN Gb contexts log CTRL bind only once vty_test_runner.py: make unittest print all output by default vty_test_runner.py: fix indents to use spaces, fix vim comment build: be robust against install-sh files above the root dir configure: check for pkg-config presence Revert "bsc: count the usage of codec by setting the lchan active" abis_rsl_rx_dchan(): guard against lchan_lookup() returning NULL gsm_trx_name(): don't break if trx is NULL jenkins.sh: use osmo-build-dep.sh, log test failures ipaccess-config: initialize root talloc ctx with name bs11_config: initialize bs11 tall ctx, use instead of bsc ctx meas_pcap2db.c: remove unused include of msgb.h gtphub_test.c: remove unused include of msgb.h msgb talloc ctx: initialize in all main() scopes msgb ctx: use new msgb_talloc_ctx_init(), don't access talloc_msgb_ctx info log: iu: add line break to and tweak rx RAB Ass Resp log log: count_codecs(): drop logging of non-TCH lchan types bsc_vty: include dyn TS info in vty show lchan fix use after free in bsc_config_free OM2000: for TS conf of dyn TS, always send TCH/F chan comb OM2000: disallow ip.access style TCH/F_PDCH pchan type Add empty libcommon-cs define mncc_recv_cb_t to avoid code dup move to libcommon-cs: net init 1: rename to bsc_network_init move to libcommon-cs: net init 2: move bsc_network_init decl to new .h move to libcommon-cs: net init 3: actual move move to libcommon-cs: gsm48_create_mm_serv_rej(), gsm48_create_loc_upd_rej() IuPS: properly update ra_id on GMM Attach Request factor out gen of USSD notify and release complete to libosmocore factor out & introduce struct gsm_encr, in common_cs.h sms_next_rp_msg_ref(): use direct pointer to next_rp_ref counter tests: drop unused libmsc, unneeded duplicate libbsc linking split bsc_bootstrap_network() in alloc and config global gsm_network: move allocation further up move to libcommon-cs: global vty gsm_network pointer move to libcommon-cs: network VTY that isn't BSC-specific bsc vty: rename show_net_cmd to bsc_show_net_cmd reinvent connection_for_subscr() and move to libmsc Move timezone settings up to network level move to libcommon-cs: net timezone VTY config split subscr_con_allocate()/_free() in bsc_ and msc_ osmo-nitb: exit when MNCC socket init failed gsm_subscriber_connection: mark BSC specific items abis_om2k: fix typo that declared non-existent struct gsm_bts_trx_s lchan release in error state: SACCH deact only for SACCH pchans cosmetic: chan_alloc: use switch instead of if-cascade Fix TCH/F_PDCH: no need to check ts subslots for PDCH Revert "Support Deactivate PDP Context Request from network" build: bump required libosmocore, libosmogsm to 0.9.4, for GSUP comments: gsup client: rename to Generic, adjust copyright and authors gprs_gsup_client*: remove the gprs_ prefix rename gprs_gsup_client.h to gsup_client.h gsup client, gsup_test_client: move logging to DLGSUP category oap: rename public API from oap_ to oap_client_ rename oap.h to oap_client.h move gprs/oap.c to libcommon/oap_client.c move grps_gsup_client.c to libcommon/gsup_client.c oap_test.c: rename to avoid clash with libosmocore oap_test.c oap_client_test: print test descr to stderr, check stderr oap_client: move logging to DLOAP logging category oap_client_test: show bug: disabled state does not reject message oap_client: reject all messages in disabled/uninitialized state oap_client: make use of OAP optional: disable for NULL config fix: missing terminator in two value_string arrays gtphub: fix possible NULL deref: don't print NULL tunnel build: osmo-nitb: fix missing LIBCRYPTO_FLAGS build: remove obsolete $LIBCRYPT in two places gitignore: gsup_test_client binary use new OSMO_VALUE_STRING fix 'osmo-nitb --version' segfault Revert "Turn some warnings into errors" gprs subscr: fix: intended strcmp(), but is strcpy() undup: gtphub_test: use libosmocore's llist_count() fix strncpy() invocation in vty_interface_layer3.c and 3 tests cosmetic: use osmo_strlcpy() everywhere various comment / whitespace tweaks (libmsc, gprs, libcommon-cs) osmo_bsc_grace.h: use '<>' include, not '""' paging.h: use '<>' include, not '""' compiler warning: bsc_vty: remove two unused vars gsm0408_rcv_cc: guard against NULL subscriber vty tests: attempt to get at sporadic 'Broken Pipe' error vty tests: more attempts to resolve sporadic 'Broken Pipe' error vty tests: testBSCreload: ipa_handle_small: ensure rx of 4 bytes gsm48_tx_mm_auth_req(): support UMTS AUTN Revert "vty tests: more attempts to resolve sporadic 'Broken Pipe' error" gsm_04_08: implement parsing of UMTS Auth responses vty tests: more attempts to resolve 'Broken Pipe' error vty tests: more attempts to resolve 'Broken Pipe' error (3) vty tests: more attempts to resolve 'Broken Pipe' error (2) remove compiler warning: unused rc in vty_interface_layer3 subscr_update_expire_lu(): fix (obscure) segfault logging: use central filter and ctx consts from libosmocore debug.h/c: remove unused cruft / cosmetic tweaks logging fixup: shorter names for LOGGING_FILTER_* and LOGGING_CTX_* cosmetic: remove unused scall_signal_data.subscr vty_test_runner.py: fix socket leak vty: fix subscr ref count leak in 'subscriber name' cmd cosmetic: gsm_data.h, README: rename CSCN to MSC cosmetic: clarify BSC's remote MSC data vs. OsmoMSC cosmetic: rename osmo_msc_data.h to bsc_msc_data.h cosmetic: rename struct osmo_msc_data to bsc_msc_data add struct gprs_subscr, separating gprs from gsm_subscriber vty_rest_runner.py: remove debug monitoring for TCP sockets python tests: remove process 'Launch' message, now at osmoutil smpp_test_runner.py: fix socket leak SGSN: Integrate support for UMTS AKA SGSN VTY: make missing GSUP server address+port fatal vty test: nat_msc_test: setsockopt REUSE to avoid TIME_WAIT problems ctrl_test_runner: speed up more than 10 fold by sleeping less fix: gprs_gmm, gprs_llc_vty: two unterminated value_string arrays subscriber conn: add indicator for originating RAN vty tests: allow picking specific tests to run by name vty tests: close msc socket after nat_msc_test add struct bsc_subscr, separating libbsc from gsm_subscriber python tests: vty and smpp: speed up >10 times oap tests: fix after SQN scheme changes from libosmocore jenkins: add value_string termination check bsc_/gprs_subscriber: fix: use osmo_strlcpy() to safely copy IMSI python tests: allow running from separate build dir LU counters: count completion and failure, not messages sent jenkins.sh: Iu: use libosmo-sccp,-netif master build: iu: use libosmo-sccp tag 'old_sua' fix VTY parsing: subscriber-create-on-demand random fix subscriber random extension allocation range fix '/include/openbsc ' to have no trailing space ipaccess-config: properly create swload jenkins: fix build of --enable-iu: use osmo-iuh tag 'old_sua' cosmetic: vty for timers: remove obsolete range check vty: add 'default' keyword to timer config timer vty: also print the default value in cmd doc Revert "factor out & introduce struct gsm_encr, in common_cs.h" fix vty tests: vty no longer goes to parent node implicitly jenkins: use osmo-clean-workspace.sh before and after build Pablo Neira Ayuso (27): mgcp_osmux: available circuit IDs from 0 to 255, not from 0 to 128 libmsc: use GSM411_RP_CAUSE_MO_NUM_UNASSIGNED as return value libmsc: send RP-ACK to MS after ESME sends SMPP DELIVER-SM-RESP src: use osmo_timer_setup() gsm_04_11: get rid of unused parameter in sms_route_mt_sms() libmsc: do not leak pending SMPP command object on error path libmsc: remove dead code in sms_route_mt_sms() libmsc: remove duplicate lines in deliver_to_esme() libmsc: remove 'deferred' parameter in sms_route_mt_sms() libmsc: move gsm340_rx_sms_submit() to sms_route_mt_sms() libmsc: set registered_delivery field in SMPP 3.4 DELIVER_SM messages libmsc: report status report request flag from SMPP SUBMIT_SM libmsc: missing bit shift in status report flag when stored in sms object utils: smpp_mirror: set registered_delivery field in SMPP SUBMIT_SM utils: smpp_mirror: temporarily munch SMPP delivery receipts utils: smpp_mirror: reflect message reference TLV libmsc: add support for SMPP delivery receipts libmsc: update database to accomodate SMS status-report fields utils: smpp_mirror: bounce Delivery Receipts as Delivery Acknowledgments libmsc: handle delivery ack via SMPP SUBMIT SM / send GSM 03.40 status report libmsc: support GSM 03.40 status report for nitb libmsc: gsm340_gen_oa_sub() may return negative value libmsc: use smpp34_tlv_for_each() to avoid suboptimal TLV handling libmsc: use new smpp34 esm_class definitions libmsc: use SMPP34_DELIVERY_RECEIPT_* in libsmpp34 libmsc: annotate esme route in the sms object from deliver_to_esme() libmsc: sms_route_mt_sms() may return uninitialized return value Pau Espin Pedrol (11): nat: Use equal func in bsc_sccp nat: Fix initial buffer size parameter for getline smpp_smsc.c: Log on sending deliver_sm message libmsc: Remove comment not applying anymore mgcp_osmux: Remove unused parameter mgcp: Fix uplink activation of Osmux stream sgsn_test: Fix wrong definition of wrap func smpp: Fix compilation warning libmsc: Fix wrong handling of user_message_reference parameter bsc_api: Fix NULL secondary_lchan access in handle_ass_fail libbsc: Use correct printf formatting for uint64_t Philipp (27): Adding LLC-XID encoder / decoder and unit test Moving grs_sndcp.h header file to include Adding LLC-XID related modifications in LLC SNDCP: add SNDCP-XID encoder/decoder and unit test RFC1144: add slhc code from linux kernel RFC1144: integration and unit-test SNDCP: add RFC1144 header compression functionality V.42bis: add sourcecode from IAXmodem (SPANDSP) V.42bis: integration and unit test SNDCP: add V.42bis data compression functionality SLHC: Improving slhc (RFC1144) testcase SGSN: Fixing build config sndcp: Fixups for sndcp layer based on coverity-scan suggestions OML: Improve OML attribute handling gsm0408: Adding log output for 3g specific RR messages Cosmetic: Add missing switch to usage help OM2000: Add fault report parsing om2000: added support for ericssons sabm negotiation OM2000: Throw error when MO can not be enabled SNDCP: Fixup based on Coverity Scan suggestion rbs2000: Add missing bts feature definitions OM2000: Fixup based on Coverity Scan suggestion rsl: support for ericssons propritary SI13 format sndcp: fixup for coverity scan defect CID 149097 LLC: Fixup element order in LLC-XID sndcp: Allow empty SNDCP-XID indications cosmetic: Rename phone to ms Philipp Maier (14): compression: Fix nullpointer deref gprs: Fix compiler warning about uninitalized cause code om2000: add VTY command to delete CON groups XID: resend xid with pdp-ctx-ack messages silent_call: remove unfinished fuzzer interface sgsn: fix problem with leading-zero-IMSIs cosmetic: add copyright header to bsc_control.py cosmetic: Add commandline option to display version gprs: fix T3186 encoding in Sysinfo 13 gsm_data_shared: add value strings for gsm_chreq libbsc: add debug log message to S_L_INP_* callbacks pcu_sock: add basic pcu interface support pcu_sock: Forward imm.ass PCU originated messages pcu_sock: Fix broken paging command Pravin Kumarvel (3): Correct Logging macro for pdpctx_timer_start Add support for pdpctx_timer_stop Support Deactivate PDP Context Request from network Ruben Undheim (3): Patch to make openbsc find libsmpp34 Fix some typos in stdout output deb: unbreak nightly builds Vadim Yanitskiy (4): move to hex TMSI representation db.c: implemented incremental migration mncc_sock: use osmo_sock_unix_init() from libosmocore VTY: add the dyn_ts_allow_tch_f option bhargava (1): Modify SI 13 field to support 11 bit RACH root (1): om2000: Add support for querying RBS capabilities ----------------------------------------------------------------------- hooks/post-receive -- Legacy: The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)