Attention is currently required from: lynxis lazus.
mschramm has posted comments on this change. ( https://gerrit.osmocom.org/c/simtrace2/+/36441?usp=email )
Change subject: cardemu: add support for inverted sim presence pins
......................................................................
Patch Set 1:
(1 comment)
Patchset:
PS1:
I agree that this could once become a cmd line param. - Does this change reliably solve the owhw_v7 remsim problem? If unsure: what does it need to further investigate? (for discussion on that, we don't need to continue here, but could move to e.g. SYS#6754 or another ticket)
--
To view, visit https://gerrit.osmocom.org/c/simtrace2/+/36441?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: simtrace2
Gerrit-Branch: master
Gerrit-Change-Id: I33325f763b56b297762a3fb6fe6baa7b0354de3c
Gerrit-Change-Number: 36441
Gerrit-PatchSet: 1
Gerrit-Owner: lynxis lazus <lynxis(a)fe80.eu>
Gerrit-Reviewer: Jenkins Builder
Gerrit-CC: mschramm <mschramm(a)sysmocom.de>
Gerrit-Attention: lynxis lazus <lynxis(a)fe80.eu>
Gerrit-Comment-Date: Mon, 25 Mar 2024 11:59:18 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Gerrit-MessageType: comment
Attention is currently required from: pespin.
osmith has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/36444?usp=email )
Change subject: Diameter Gy CCR: Expect RATType AVP in PS-Information instead of MSCC
......................................................................
Patch Set 1: Code-Review+1
(1 comment)
Patchset:
PS1:
not backwards compatible, but since we don't test open5gs latest right now it's fine
--
To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/36444?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-ttcn3-hacks
Gerrit-Branch: master
Gerrit-Change-Id: I7ce77d08847a0876291f76e901e5c89c339db27d
Gerrit-Change-Number: 36444
Gerrit-PatchSet: 1
Gerrit-Owner: pespin <pespin(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: osmith <osmith(a)sysmocom.de>
Gerrit-Attention: pespin <pespin(a)sysmocom.de>
Gerrit-Comment-Date: Mon, 25 Mar 2024 11:45:33 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: Yes
Gerrit-MessageType: comment
osmith has submitted this change. ( https://gerrit.osmocom.org/c/docker-playground/+/36392?usp=email )
Change subject: ttcn3-ggsn-test: run with multiple configurations
......................................................................
ttcn3-ggsn-test: run with multiple configurations
The kernel ttcn3-ggsn-tests have been failing since the osmo-ggsn
config for kernel-gtp has been adjusted for v4v6 instead of v4 only.
This new configuration caused a regression with:
* linux kernel without Pablo's GTP IPv6 patches
* latest stable release of osmo-ggsn, which does not support IPv6
As the kernel patches aren't merged yet, this caused all tests to fail.
Avoid this by running the ttcn3-ggsn-test with multiple configurations:
* v4_only: one APN with v4
* v6_only: one APN with v6
* v4v6_only: one APN with v4v6
* all: multiple APNs with all of the above
With this change, the tests running in the v4_only configuration will
pass again with the stable versions of osmo-ggsn, libgtpnl and kernel.
And with new versions, most test in the other configurations will pass
too.
As discussed with Harald, this does not only split up the configuration
for osmo-ggsn with kernel gtp-u, but also with the userspace
implementation. The "all" config currently only works with the
userspace gtp implementation (OS#6106).
Related: OS#6096
Depends: osmo-ttcn3-hacks I6d94a8b18200fbb2119406827b74b83e912e3ecc
Fixes: e24442f9 ("ttcn3-ggsn-test: kernel-gtp: add ipv6")
Change-Id: Ia2fe0c3ed4ccf06e72fd258d085e4a79cecd5f26
---
M ttcn3-ggsn-test/Dockerfile
M ttcn3-ggsn-test/jenkins.sh
C ttcn3-ggsn-test/osmo-ggsn-kernel/v4_only/osmo-ggsn.cfg
R ttcn3-ggsn-test/osmo-ggsn-kernel/v4v6_only/osmo-ggsn.cfg
C ttcn3-ggsn-test/osmo-ggsn-kernel/v6_only/osmo-ggsn.cfg
R ttcn3-ggsn-test/osmo-ggsn/all/osmo-ggsn.cfg
C ttcn3-ggsn-test/osmo-ggsn/v4_only/osmo-ggsn.cfg
C ttcn3-ggsn-test/osmo-ggsn/v4v6_only/osmo-ggsn.cfg
A ttcn3-ggsn-test/osmo-ggsn/v6_only/osmo-ggsn.cfg
R ttcn3-ggsn-test/ttcn3/all/GGSN_Tests.cfg
C ttcn3-ggsn-test/ttcn3/v4_only/GGSN_Tests.cfg
C ttcn3-ggsn-test/ttcn3/v4v6_only/GGSN_Tests.cfg
C ttcn3-ggsn-test/ttcn3/v6_only/GGSN_Tests.cfg
13 files changed, 170 insertions(+), 71 deletions(-)
Approvals:
pespin: Looks good to me, but someone else must approve
Jenkins Builder: Verified
osmith: Looks good to me, approved
diff --git a/ttcn3-ggsn-test/Dockerfile b/ttcn3-ggsn-test/Dockerfile
index 137a4cd..e1da704 100644
--- a/ttcn3-ggsn-test/Dockerfile
+++ b/ttcn3-ggsn-test/Dockerfile
@@ -8,6 +8,6 @@
VOLUME /data
-COPY ttcn3/GGSN_Tests.cfg /data/GGSN_Tests.cfg
+COPY ttcn3/all/GGSN_Tests.cfg /data/GGSN_Tests.cfg
CMD ttcn3-docker-run ggsn_tests GGSN_Tests
diff --git a/ttcn3-ggsn-test/jenkins.sh b/ttcn3-ggsn-test/jenkins.sh
index 3f1eaf3..f9e7a47 100755
--- a/ttcn3-ggsn-test/jenkins.sh
+++ b/ttcn3-ggsn-test/jenkins.sh
@@ -1,5 +1,12 @@
#!/bin/sh
-# Environment variables: see "Kernel test" section in README.md
+# Environment variables: see README.md
+# Possible test configurations:
+# * v4_only: one APN with v4
+# * v6_only: one APN with v6
+# * v4v6_only: one APN with v4v6
+# * all: multiple APNs with all of the above
+TEST_CONFIGS_ALL="all v4_only v6_only v4v6_only"
+TEST_CONFIGS="${TEST_CONFIGS:-$TEST_CONFIGS_ALL}"
. ../jenkins-common.sh
KERNEL_TEST="${KERNEL_TEST:-0}"
@@ -11,20 +18,41 @@
set_clean_up_trap
set -e
+clean_up() {
+ local i
+ local log
+
+ # Add a suffix to the class names in the junit-xml log
+ for i in $TEST_CONFIGS; do
+ if [ "$i" = "all" ]; then
+ continue
+ fi
+
+ for log in "$VOL_BASE_DIR"/ggsn-tester-"$i"/junit-xml-*.log; do
+ if ! [ -e "$log" ]; then
+ continue
+ fi
+ sed -i "s/classname='\([^']\+\)'/classname='\1_$i'/g" "$log"
+ done
+ done
+}
+
# Start container with ggsn in background
start_ggsn() {
+ local test_config="$1"
+
GGSN_CMD="osmo-ggsn -c /data/osmo-ggsn.cfg"
GGSN_DOCKER_ARGS=""
if [ "$KERNEL_TEST" = "1" ]; then
- cp osmo-ggsn-kernel/initrd-ggsn.sh $VOL_BASE_DIR/ggsn/
+ cp osmo-ggsn-kernel/initrd-ggsn.sh $VOL_BASE_DIR/ggsn-"$test_config"/
network_replace_subnet_in_configs
kernel_test_prepare \
"defconfig" \
"osmo-ggsn-kernel/fragment.config" \
- "$VOL_BASE_DIR/ggsn/initrd-ggsn.sh" \
+ "$VOL_BASE_DIR/ggsn-$test_config/initrd-ggsn.sh" \
"$REPO_USER/osmo-ggsn-$IMAGE_SUFFIX" \
- -v $VOL_BASE_DIR/ggsn:/data
+ -v $VOL_BASE_DIR/ggsn-"$test_config":/data
GGSN_CMD="/kernel-test/run-qemu.sh"
GGSN_DOCKER_ARGS="
@@ -46,23 +74,25 @@
--device /dev/net/tun:/dev/net/tun \
--sysctl net.ipv6.conf.all.disable_ipv6=0 \
--ulimit core=-1 \
- -v $VOL_BASE_DIR/ggsn:/data \
+ -v $VOL_BASE_DIR/ggsn-"$test_config":/data \
--name ${BUILD_TAG}-ggsn -d \
$DOCKER_ARGS \
$GGSN_DOCKER_ARGS \
$REPO_USER/osmo-ggsn-$IMAGE_SUFFIX \
/bin/sh -c "$GGSN_CMD >/data/osmo-ggsn.log 2>&1"
- kernel_test_wait_for_vm "$VOL_BASE_DIR/ggsn/osmo-ggsn.log"
+ kernel_test_wait_for_vm "$VOL_BASE_DIR/ggsn-$test_config/osmo-ggsn.log"
}
# Start docker container with testsuite in foreground
start_testsuite() {
+ local test_config="$1"
+
docker run --rm \
--sysctl net.ipv6.conf.all.disable_ipv6=0 \
$(docker_network_params $SUBNET 202) \
--ulimit core=-1 \
- -v $VOL_BASE_DIR/ggsn-tester:/data \
+ -v $VOL_BASE_DIR/ggsn-tester-"$test_config":/data \
-e "TTCN3_PCAP_PATH=/data" \
-e "OSMO_SUT_HOST=$OSMO_SUT_HOST" \
-e "OSMO_SUT_PORT=4260" \
@@ -71,12 +101,6 @@
$REPO_USER/ttcn3-ggsn-test
}
-mkdir $VOL_BASE_DIR/ggsn-tester
-cp ttcn3/GGSN_Tests.cfg $VOL_BASE_DIR/ggsn-tester/
-write_mp_osmo_repo "$VOL_BASE_DIR/ggsn-tester/GGSN_Tests.cfg"
-
-mkdir $VOL_BASE_DIR/ggsn
-
network_create
if [ "$KERNEL_TEST" = 1 ]; then
@@ -85,8 +109,28 @@
CONFIGS_DIR="osmo-ggsn"
fi
-cp "$CONFIGS_DIR"/osmo-ggsn.cfg $VOL_BASE_DIR/ggsn/osmo-ggsn.cfg
-network_replace_subnet_in_configs
+for i in $TEST_CONFIGS_ALL; do
+ if ! test_config_enabled "$i"; then
+ continue
+ fi
-start_ggsn
-start_testsuite
+ # OS#6106: Currently it is not possible to configure multiple APNs with
+ # gtpu-mode kernel-gtp in OsmoGGSN, because it cannot share the GTP-U
+ # bind socket between tunnels.
+ if [ "$i" = "all" ] && [ "$KERNEL_TEST" = "1" ]; then
+ continue
+ fi
+
+ mkdir $VOL_BASE_DIR/ggsn-tester-"$i"
+ cp ttcn3/"$i"/GGSN_Tests.cfg $VOL_BASE_DIR/ggsn-tester-"$i"/GGSN_Tests.cfg
+ write_mp_osmo_repo "$VOL_BASE_DIR/ggsn-tester-$i/GGSN_Tests.cfg"
+
+ mkdir $VOL_BASE_DIR/ggsn-"$i"
+ cp "$CONFIGS_DIR"/"$i"/osmo-ggsn.cfg "$VOL_BASE_DIR"/ggsn-"$i"/osmo-ggsn.cfg
+ network_replace_subnet_in_configs
+
+ start_ggsn "$i"
+ start_testsuite "$i"
+
+ docker_kill_wait "$BUILD_TAG"-ggsn
+done
diff --git a/ttcn3-ggsn-test/osmo-ggsn-kernel/osmo-ggsn.cfg b/ttcn3-ggsn-test/osmo-ggsn-kernel/v4_only/osmo-ggsn.cfg
similarity index 63%
copy from ttcn3-ggsn-test/osmo-ggsn-kernel/osmo-ggsn.cfg
copy to ttcn3-ggsn-test/osmo-ggsn-kernel/v4_only/osmo-ggsn.cfg
index afa36d6..d8b67a2 100644
--- a/ttcn3-ggsn-test/osmo-ggsn-kernel/osmo-ggsn.cfg
+++ b/ttcn3-ggsn-test/osmo-ggsn-kernel/v4_only/osmo-ggsn.cfg
@@ -25,23 +25,14 @@
ggsn ggsn0
gtp state-dir /tmp
gtp bind-ip 172.18.3.201
- # OS#6106: Currently it is not possible to configure multiple APNs with
- # gtpu-mode kernel-gtp in OsmoGGSN, because it cannot share the GTP-U bind
- # socket between tunnels.
apn internet
gtpu-mode kernel-gtp
- tun-device tun46
- type-support v4v6
+ tun-device tun4
+ type-support v4
ip prefix dynamic 176.16.16.0/20
ip dns 0 172.18.3.201
ip dns 1 8.8.8.8
ip ifconfig 176.16.16.0/20
- ipv6 prefix dynamic 2001:780:44:2100:0:0:0:0/56
- ipv6 dns 0 fd02:db8:3::201
- ipv6 dns 1 2001:4860:4860::8844
- ipv6 ifconfig 2001:780:44:2100:0:0:0:0/56
no shutdown
-# apn inet6
-# apn inet46
default-apn internet
no shutdown ggsn
diff --git a/ttcn3-ggsn-test/osmo-ggsn-kernel/osmo-ggsn.cfg b/ttcn3-ggsn-test/osmo-ggsn-kernel/v4v6_only/osmo-ggsn.cfg
similarity index 77%
rename from ttcn3-ggsn-test/osmo-ggsn-kernel/osmo-ggsn.cfg
rename to ttcn3-ggsn-test/osmo-ggsn-kernel/v4v6_only/osmo-ggsn.cfg
index afa36d6..c3f32f7 100644
--- a/ttcn3-ggsn-test/osmo-ggsn-kernel/osmo-ggsn.cfg
+++ b/ttcn3-ggsn-test/osmo-ggsn-kernel/v4v6_only/osmo-ggsn.cfg
@@ -25,10 +25,7 @@
ggsn ggsn0
gtp state-dir /tmp
gtp bind-ip 172.18.3.201
- # OS#6106: Currently it is not possible to configure multiple APNs with
- # gtpu-mode kernel-gtp in OsmoGGSN, because it cannot share the GTP-U bind
- # socket between tunnels.
- apn internet
+ apn inet46
gtpu-mode kernel-gtp
tun-device tun46
type-support v4v6
@@ -41,7 +38,5 @@
ipv6 dns 1 2001:4860:4860::8844
ipv6 ifconfig 2001:780:44:2100:0:0:0:0/56
no shutdown
-# apn inet6
-# apn inet46
- default-apn internet
+ default-apn inet46
no shutdown ggsn
diff --git a/ttcn3-ggsn-test/osmo-ggsn-kernel/osmo-ggsn.cfg b/ttcn3-ggsn-test/osmo-ggsn-kernel/v6_only/osmo-ggsn.cfg
similarity index 64%
copy from ttcn3-ggsn-test/osmo-ggsn-kernel/osmo-ggsn.cfg
copy to ttcn3-ggsn-test/osmo-ggsn-kernel/v6_only/osmo-ggsn.cfg
index afa36d6..9de035f 100644
--- a/ttcn3-ggsn-test/osmo-ggsn-kernel/osmo-ggsn.cfg
+++ b/ttcn3-ggsn-test/osmo-ggsn-kernel/v6_only/osmo-ggsn.cfg
@@ -25,23 +25,14 @@
ggsn ggsn0
gtp state-dir /tmp
gtp bind-ip 172.18.3.201
- # OS#6106: Currently it is not possible to configure multiple APNs with
- # gtpu-mode kernel-gtp in OsmoGGSN, because it cannot share the GTP-U bind
- # socket between tunnels.
- apn internet
+ apn inet6
gtpu-mode kernel-gtp
- tun-device tun46
- type-support v4v6
- ip prefix dynamic 176.16.16.0/20
- ip dns 0 172.18.3.201
- ip dns 1 8.8.8.8
- ip ifconfig 176.16.16.0/20
+ tun-device tun6
+ type-support v6
ipv6 prefix dynamic 2001:780:44:2100:0:0:0:0/56
ipv6 dns 0 fd02:db8:3::201
ipv6 dns 1 2001:4860:4860::8844
ipv6 ifconfig 2001:780:44:2100:0:0:0:0/56
no shutdown
-# apn inet6
-# apn inet46
- default-apn internet
+ default-apn inet6
no shutdown ggsn
diff --git a/ttcn3-ggsn-test/osmo-ggsn/osmo-ggsn.cfg b/ttcn3-ggsn-test/osmo-ggsn/all/osmo-ggsn.cfg
similarity index 100%
rename from ttcn3-ggsn-test/osmo-ggsn/osmo-ggsn.cfg
rename to ttcn3-ggsn-test/osmo-ggsn/all/osmo-ggsn.cfg
diff --git a/ttcn3-ggsn-test/osmo-ggsn-kernel/osmo-ggsn.cfg b/ttcn3-ggsn-test/osmo-ggsn/v4_only/osmo-ggsn.cfg
similarity index 60%
copy from ttcn3-ggsn-test/osmo-ggsn-kernel/osmo-ggsn.cfg
copy to ttcn3-ggsn-test/osmo-ggsn/v4_only/osmo-ggsn.cfg
index afa36d6..7a94b59 100644
--- a/ttcn3-ggsn-test/osmo-ggsn-kernel/osmo-ggsn.cfg
+++ b/ttcn3-ggsn-test/osmo-ggsn/v4_only/osmo-ggsn.cfg
@@ -25,23 +25,17 @@
ggsn ggsn0
gtp state-dir /tmp
gtp bind-ip 172.18.3.201
- # OS#6106: Currently it is not possible to configure multiple APNs with
- # gtpu-mode kernel-gtp in OsmoGGSN, because it cannot share the GTP-U bind
- # socket between tunnels.
+ timer gtp T3 1
+ timer gtp T1003 2
+ timer gtp X3 2
apn internet
- gtpu-mode kernel-gtp
- tun-device tun46
- type-support v4v6
+ gtpu-mode tun
+ tun-device tun4
+ type-support v4
ip prefix dynamic 176.16.16.0/20
ip dns 0 172.18.3.201
ip dns 1 8.8.8.8
ip ifconfig 176.16.16.0/20
- ipv6 prefix dynamic 2001:780:44:2100:0:0:0:0/56
- ipv6 dns 0 fd02:db8:3::201
- ipv6 dns 1 2001:4860:4860::8844
- ipv6 ifconfig 2001:780:44:2100:0:0:0:0/56
no shutdown
-# apn inet6
-# apn inet46
default-apn internet
no shutdown ggsn
diff --git a/ttcn3-ggsn-test/osmo-ggsn-kernel/osmo-ggsn.cfg b/ttcn3-ggsn-test/osmo-ggsn/v4v6_only/osmo-ggsn.cfg
similarity index 69%
copy from ttcn3-ggsn-test/osmo-ggsn-kernel/osmo-ggsn.cfg
copy to ttcn3-ggsn-test/osmo-ggsn/v4v6_only/osmo-ggsn.cfg
index afa36d6..f63b0d5 100644
--- a/ttcn3-ggsn-test/osmo-ggsn-kernel/osmo-ggsn.cfg
+++ b/ttcn3-ggsn-test/osmo-ggsn/v4v6_only/osmo-ggsn.cfg
@@ -25,23 +25,21 @@
ggsn ggsn0
gtp state-dir /tmp
gtp bind-ip 172.18.3.201
- # OS#6106: Currently it is not possible to configure multiple APNs with
- # gtpu-mode kernel-gtp in OsmoGGSN, because it cannot share the GTP-U bind
- # socket between tunnels.
- apn internet
- gtpu-mode kernel-gtp
+ timer gtp T3 1
+ timer gtp T1003 2
+ timer gtp X3 2
+ apn inet46
+ gtpu-mode tun
tun-device tun46
type-support v4v6
- ip prefix dynamic 176.16.16.0/20
+ ip prefix dynamic 176.16.32.0/20
ip dns 0 172.18.3.201
ip dns 1 8.8.8.8
- ip ifconfig 176.16.16.0/20
+ ip ifconfig 176.16.32.0/20
ipv6 prefix dynamic 2001:780:44:2100:0:0:0:0/56
ipv6 dns 0 fd02:db8:3::201
ipv6 dns 1 2001:4860:4860::8844
ipv6 ifconfig 2001:780:44:2100:0:0:0:0/56
no shutdown
-# apn inet6
-# apn inet46
- default-apn internet
+ default-apn inet46
no shutdown ggsn
diff --git a/ttcn3-ggsn-test/osmo-ggsn/v6_only/osmo-ggsn.cfg b/ttcn3-ggsn-test/osmo-ggsn/v6_only/osmo-ggsn.cfg
new file mode 100644
index 0000000..bca3f57
--- /dev/null
+++ b/ttcn3-ggsn-test/osmo-ggsn/v6_only/osmo-ggsn.cfg
@@ -0,0 +1,41 @@
+!
+! OpenGGSN (0.94.1-adac) configuration saved from vty
+!!
+!
+log gsmtap 172.18.3.202
+ logging level set-all debug
+ logging filter all 1
+!
+log stderr
+ logging filter all 1
+ logging color 1
+ logging print level 1
+ logging print category 1
+ logging print category-hex 0
+ logging print file basename last
+ logging print extended-timestamp 1
+ logging level set-all info
+!
+stats interval 5
+!
+line vty
+ no login
+ bind 0.0.0.0
+!
+ggsn ggsn0
+ gtp state-dir /tmp
+ gtp bind-ip 172.18.3.201
+ timer gtp T3 1
+ timer gtp T1003 2
+ timer gtp X3 2
+ apn inet6
+ gtpu-mode tun
+ tun-device tun6
+ type-support v6
+ ipv6 prefix dynamic 2001:780:44:2000:0:0:0:0/56
+ ipv6 dns 0 fd02:db8:3::201
+ ipv6 dns 1 2001:4860:4860::8844
+ ipv6 ifconfig 2001:780:44:2000:0:0:0:0/56
+ no shutdown
+ default-apn inet6
+ no shutdown ggsn
diff --git a/ttcn3-ggsn-test/ttcn3/GGSN_Tests.cfg b/ttcn3-ggsn-test/ttcn3/all/GGSN_Tests.cfg
similarity index 94%
rename from ttcn3-ggsn-test/ttcn3/GGSN_Tests.cfg
rename to ttcn3-ggsn-test/ttcn3/all/GGSN_Tests.cfg
index cb548b3..f715d9f 100644
--- a/ttcn3-ggsn-test/ttcn3/GGSN_Tests.cfg
+++ b/ttcn3-ggsn-test/ttcn3/all/GGSN_Tests.cfg
@@ -24,5 +24,7 @@
# local N3-REQUESTS counter:
GGSN_Tests.mp_n3_requests := 2
+GGSN_Tests.m_ggsn_conf := GGSN_CONF_ALL
+
[EXECUTE]
GGSN_Tests.control
diff --git a/ttcn3-ggsn-test/ttcn3/GGSN_Tests.cfg b/ttcn3-ggsn-test/ttcn3/v4_only/GGSN_Tests.cfg
similarity index 93%
copy from ttcn3-ggsn-test/ttcn3/GGSN_Tests.cfg
copy to ttcn3-ggsn-test/ttcn3/v4_only/GGSN_Tests.cfg
index cb548b3..fc21c72 100644
--- a/ttcn3-ggsn-test/ttcn3/GGSN_Tests.cfg
+++ b/ttcn3-ggsn-test/ttcn3/v4_only/GGSN_Tests.cfg
@@ -24,5 +24,7 @@
# local N3-REQUESTS counter:
GGSN_Tests.mp_n3_requests := 2
+GGSN_Tests.m_ggsn_conf := GGSN_CONF_V4_ONLY
+
[EXECUTE]
GGSN_Tests.control
diff --git a/ttcn3-ggsn-test/ttcn3/GGSN_Tests.cfg b/ttcn3-ggsn-test/ttcn3/v4v6_only/GGSN_Tests.cfg
similarity index 93%
copy from ttcn3-ggsn-test/ttcn3/GGSN_Tests.cfg
copy to ttcn3-ggsn-test/ttcn3/v4v6_only/GGSN_Tests.cfg
index cb548b3..c2c8b4a 100644
--- a/ttcn3-ggsn-test/ttcn3/GGSN_Tests.cfg
+++ b/ttcn3-ggsn-test/ttcn3/v4v6_only/GGSN_Tests.cfg
@@ -24,5 +24,7 @@
# local N3-REQUESTS counter:
GGSN_Tests.mp_n3_requests := 2
+GGSN_Tests.m_ggsn_conf := GGSN_CONF_V4V6_ONLY
+
[EXECUTE]
GGSN_Tests.control
diff --git a/ttcn3-ggsn-test/ttcn3/GGSN_Tests.cfg b/ttcn3-ggsn-test/ttcn3/v6_only/GGSN_Tests.cfg
similarity index 93%
copy from ttcn3-ggsn-test/ttcn3/GGSN_Tests.cfg
copy to ttcn3-ggsn-test/ttcn3/v6_only/GGSN_Tests.cfg
index cb548b3..7666438 100644
--- a/ttcn3-ggsn-test/ttcn3/GGSN_Tests.cfg
+++ b/ttcn3-ggsn-test/ttcn3/v6_only/GGSN_Tests.cfg
@@ -24,5 +24,7 @@
# local N3-REQUESTS counter:
GGSN_Tests.mp_n3_requests := 2
+GGSN_Tests.m_ggsn_conf := GGSN_CONF_V6_ONLY
+
[EXECUTE]
GGSN_Tests.control
--
To view, visit https://gerrit.osmocom.org/c/docker-playground/+/36392?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: docker-playground
Gerrit-Branch: master
Gerrit-Change-Id: Ia2fe0c3ed4ccf06e72fd258d085e4a79cecd5f26
Gerrit-Change-Number: 36392
Gerrit-PatchSet: 2
Gerrit-Owner: osmith <osmith(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: osmith <osmith(a)sysmocom.de>
Gerrit-Reviewer: pespin <pespin(a)sysmocom.de>
Gerrit-MessageType: merged