October 2022 - gerrit-log - lists.osmocom.org

Change in osmo-ttcn3-hacks[master]: mgw: Fix f_two_crcx_mdcx_and_rtp_osmux()

by pespin

Hello Jenkins Builder, I'd like you to reexamine a change. Please visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/29658 to look at the new patch set (#2). Change subject: mgw: Fix f_two_crcx_mdcx_and_rtp_osmux() ...................................................................... mgw: Fix f_two_crcx_mdcx_and_rtp_osmux() Previously the test was starting to count Osmux packets too early. Now that osmux conn state has been improved in osmo-mgw [1], Osmux Rx packets are not forwarded until the conn is completely configured through MGCP, hence first osmux packets snet by our async emulation are dropped. So we must start counting the transmitted valid osmux packets according to what the test says, when the full conn is set up. [1] osmo-mgw.git Change-Id I7654ddf51d197a4107e55f4e406053b2e4a02f83. Related: SYS#5987 Change-Id: I7efd87bbbda2ffa8fd0c5a64658d42edd0f30857 --- M mgw/MGCP_Test.ttcn 1 file changed, 25 insertions(+), 10 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-ttcn3-hacks refs/changes/58/29658/2 -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/29658 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I7efd87bbbda2ffa8fd0c5a64658d42edd0f30857 Gerrit-Change-Number: 29658 Gerrit-PatchSet: 2 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-MessageType: newpatchset

2 years, 8 months

1
0
0 0

Build failure of network:osmocom:nightly/osmo-hlr in Raspbian_10/armv7l

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o… Package network:osmocom:nightly/osmo-hlr failed to build in Raspbian_10/armv7l Check out the package for editing: osc checkout network:osmocom:nightly osmo-hlr Last lines of build log: [ 388s] [456/473] installing texlive-bibtex-extra-2018.20190227-2 [ 406s] [457/473] installing texlive-latex-recommended-2018.20190227-2 [ 411s] [458/473] installing tipa-2:1.3-20 [ 413s] Regenerating '/var/lib/texmf/fmtutil.cnf-DEBIAN'... done. [ 413s] Regenerating '/var/lib/texmf/fmtutil.cnf-TEXLIVEDIST'... done. [ 413s] update-fmtutil has updated the following file(s): [ 413s] /var/lib/texmf/fmtutil.cnf-DEBIAN [ 413s] /var/lib/texmf/fmtutil.cnf-TEXLIVEDIST [ 413s] If you want to activate the changes in the above file(s), [ 413s] you should run fmtutil-sys or fmtutil. [ 413s] [459/473] installing texlive-extra-utils-2018.20190227-2 [ 423s] [460/473] installing texlive-2018.20190227-2 [ 423s] [461/473] installing texlive-pictures-2018.20190227-2 [ 426s] [462/473] installing texlive-science-2018.20190227-2 [ 428s] [463/473] installing libgtk2.0-0-2.24.32-3 [ 429s] dpkg-deb (subprocess): decompressing archive member: lzma error: compressed data is corrupt [ 429s] dpkg-deb: error: <decompress> subprocess returned error exit status 2 [ 429s] dpkg: error processing archive .init_b_cache/libgtk2.0-0.deb (--install): [ 429s] cannot copy extracted data for './usr/lib/arm-linux-gnueabihf/libgtk-x11-2.0.so.0.2400.32' to '/usr/lib/arm-linux-gnueabihf/libgtk-x11-2.0.so.0.2400.32.dpkg-new': unexpected end of file or stream [ 429s] Errors were encountered while processing: [ 429s] .init_b_cache/libgtk2.0-0.deb [ 429s] exit ... [ 429s] ### VM INTERACTION START ### [ 429s] [ 369.469174] sysrq: SysRq : Power Off [ 429s] [ 369.492535] reboot: Power down [ 430s] ### VM INTERACTION END ### [ 430s] [ 430s] armbuild02 failed "build osmo-hlr_1.5.0.8.53f60.202210070052.dsc" at Fri Oct 7 10:00:34 UTC 2022. [ 430s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 8 months

1
0
0 0

Change in osmo-ttcn3-hacks[master]: mgw: Introduce test TC_crcx_osmux_257

by pespin

pespin has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/29661 ) Change subject: mgw: Introduce test TC_crcx_osmux_257 ...................................................................... mgw: Introduce test TC_crcx_osmux_257 Related: SYS#5987 Change-Id: I74e6c760e076fe2547b6297a54524255fb8bc41b --- M mgw/MGCP_Test.ttcn M mgw/osmo-mgw.cfg 2 files changed, 47 insertions(+), 1 deletion(-) git pull ssh://gerrit.osmocom.org:29418/osmo-ttcn3-hacks refs/changes/61/29661/1 diff --git a/mgw/MGCP_Test.ttcn b/mgw/MGCP_Test.ttcn index ef99403..2a040f2 100644 --- a/mgw/MGCP_Test.ttcn +++ b/mgw/MGCP_Test.ttcn @@ -1171,6 +1171,51 @@ setverdict(pass); } + /* test Creating 257 concurrent osmux conns. It should fail since maximum is 256. */ + testcase TC_crcx_osmux_257() runs on dummy_CT { + var MgcpEndpoint ep := c_mgw_ep_rtpbridge & "*@" & c_mgw_domain; + var template MgcpCommand cmd; + var MgcpResponse resp; + var charstring cid_response; + var integer i; + + f_init(ep, true); + + for (i := 0; i < 256; i := i + 1) { + + cmd := ts_CRCX_osmux(get_next_trans_id(), ep, "recvonly", int2hex(i, 4), -1); + resp := mgcp_transceive_mgw(cmd, tr_CRCX_ACK_osmux); + extract_conn_id(resp); + + /* extract Osmux CID we got assigned by the MGW */ + var MgcpMessage resp_msg := { + response := resp + } + + if (f_mgcp_find_param(resp_msg, "X-OSMUX", cid_response) == false) { + setverdict(fail, "No Osmux CID in MGCP response", resp); + mtc.stop; + } + + /* Make sure response is no wildcard */ + if (f_mgcp_osmux_cid_decode(cid_response) == -1) { + setverdict(fail, "Osmux CID in MGCP response contains unexpected wildcard"); + mtc.stop; + } + } + + /* Now conn num 257, it should fail due to all Osmux conns already allocated: */ + cmd := ts_CRCX_osmux(get_next_trans_id(), ep, "recvonly", int2hex(i, 4), -1); + resp := mgcp_transceive_mgw(cmd, tr_MgcpResp_Err("400")); + + setverdict(pass); + + /* Clean up */ + for (i := 0; i < 256; i := i + 1) { + f_dlcx_ok(ep, int2hex(i, 4)); + } + } + /* Create one half open connection in receive-only mode. The MGW must accept * the packets but must not send any. */ testcase TC_one_crcx_receive_only_osmux() runs on dummy_CT { @@ -2839,6 +2884,7 @@ execute(TC_crcx_osmux_wildcard()); execute(TC_crcx_osmux_fixed()); execute(TC_crcx_osmux_fixed_twice()); + execute(TC_crcx_osmux_257()); execute(TC_one_crcx_receive_only_osmux()); execute(TC_one_crcx_loopback_osmux()); execute(TC_two_crcx_and_rtp_osmux()); diff --git a/mgw/osmo-mgw.cfg b/mgw/osmo-mgw.cfg index 1c5cfce..417026e 100644 --- a/mgw/osmo-mgw.cfg +++ b/mgw/osmo-mgw.cfg @@ -44,7 +44,7 @@ sdp audio-payload send-name conn-timeout 0 loop 0 - number endpoints 31 + number endpoints 300 allow-transcoding osmux off osmux bind-ip 127.0.0.1 -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/29661 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I74e6c760e076fe2547b6297a54524255fb8bc41b Gerrit-Change-Number: 29661 Gerrit-PatchSet: 1 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: newchange

2 years, 8 months

1
0
0 0

Change in osmocom-bb[master]: mobile: check return value of gsm_arfcn2band_rc()

by pespin

Attention is currently required from: fixeria. pespin has posted comments on this change. ( https://gerrit.osmocom.org/c/osmocom-bb/+/29660 ) Change subject: mobile: check return value of gsm_arfcn2band_rc() ...................................................................... Patch Set 1: Code-Review+1 -- To view, visit https://gerrit.osmocom.org/c/osmocom-bb/+/29660 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmocom-bb Gerrit-Branch: master Gerrit-Change-Id: Ia5bc9f8bf4aa3ea7374c67e329db22612bb350ca Gerrit-Change-Number: 29660 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Comment-Date: Fri, 07 Oct 2022 08:02:17 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

2 years, 8 months

1
0
0 0

Change in osmocom-bb[master]: mobile: check return value of gsm_arfcn2band_rc()

by fixeria

fixeria has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmocom-bb/+/29660 ) Change subject: mobile: check return value of gsm_arfcn2band_rc() ...................................................................... mobile: check return value of gsm_arfcn2band_rc() Change-Id: Ia5bc9f8bf4aa3ea7374c67e329db22612bb350ca Fixes: CID#282374, CID#282375, CID#282376 --- M src/host/layer23/src/mobile/gsm322.c M src/host/layer23/src/mobile/gsm48_rr.c 2 files changed, 13 insertions(+), 3 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmocom-bb refs/changes/60/29660/1 diff --git a/src/host/layer23/src/mobile/gsm322.c b/src/host/layer23/src/mobile/gsm322.c index ea760b5..d288596 100644 --- a/src/host/layer23/src/mobile/gsm322.c +++ b/src/host/layer23/src/mobile/gsm322.c @@ -4203,7 +4203,10 @@ nb->prio_low = 1; /* get C1 & C2 */ - gsm_arfcn2band_rc(nb->arfcn, &band); + if (gsm_arfcn2band_rc(nb->arfcn, &band) != 0) { + LOGP(DNB, LOGL_ERROR, "gsm_arfcn2band_rc() failed\n"); + goto cont; + } class = class_of_band(ms, band); nb->c1 = calculate_c1(DNB, nb->rla_c_dbm, s->rxlev_acc_min_db, ms_pwr_dbm(band, s->ms_txpwr_max_cch), @@ -4703,7 +4706,11 @@ enum gsm_band band; int class; - gsm_arfcn2band_rc(cs->arfcn, &band); + if (gsm_arfcn2band_rc(cs->arfcn, &band) != 0) { + LOGP(DNB, LOGL_ERROR, "gsm_arfcn2band_rc() failed\n"); + return -EINVAL; + } + class = class_of_band(cs->ms, band); /* calculate the RAL_C of serving cell */ diff --git a/src/host/layer23/src/mobile/gsm48_rr.c b/src/host/layer23/src/mobile/gsm48_rr.c index 48c70f1..be9a7e1 100644 --- a/src/host/layer23/src/mobile/gsm48_rr.c +++ b/src/host/layer23/src/mobile/gsm48_rr.c @@ -1516,7 +1516,10 @@ uint8_t tx_power; enum gsm_band band; - gsm_arfcn2band_rc(cs->arfcn, &band); + if (gsm_arfcn2band_rc(cs->arfcn, &band) != 0) { + LOGP(DRR, LOGL_ERROR, "gsm_arfcn2band_rc() failed\n"); + return -EINVAL; + } /* already assigned */ if (rr->wait_assign == 2) -- To view, visit https://gerrit.osmocom.org/c/osmocom-bb/+/29660 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmocom-bb Gerrit-Branch: master Gerrit-Change-Id: Ia5bc9f8bf4aa3ea7374c67e329db22612bb350ca Gerrit-Change-Number: 29660 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-MessageType: newchange

2 years, 8 months

1
0
0 0

Change in osmo-ttcn3-hacks[master]: pcu: f_pcuif_tx_data_ind(): make waiting behavior configurable

by pespin

Attention is currently required from: fixeria. pespin has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/29628 ) Change subject: pcu: f_pcuif_tx_data_ind(): make waiting behavior configurable ...................................................................... Patch Set 2: Code-Review+1 -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/29628 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I3200b8a2973f97f08714654e525c631da5d6e382 Gerrit-Change-Number: 29628 Gerrit-PatchSet: 2 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Comment-Date: Fri, 07 Oct 2022 07:26:10 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

2 years, 8 months

1
0
0 0

Build failure of network:osmocom:nightly/osmo-msc in Raspbian_11/armv7l

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o… Package network:osmocom:nightly/osmo-msc failed to build in Raspbian_11/armv7l Check out the package for editing: osc checkout network:osmocom:nightly osmo-msc Last lines of build log: [ 409s] [473/493] installing systemd-sysv-247.3-7+rpi1+deb11u1 [ 410s] [474/493] installing python3-nwdiag-2.0.0+dfsg-1 [ 411s] [475/493] installing texlive-formats-extra-2020.20210202-3 [ 415s] [476/493] installing docbook-utils-0.6.14-3.4 [ 415s] Processing triggers for sgml-base (1.30) ... [ 415s] [477/493] installing libpam-systemd-247.3-7+rpi1+deb11u1 [ 418s] [478/493] installing asciidoc-dblatex-9.0.0~rc2-1 [ 419s] [479/493] installing dbus-user-session-1.12.20-2 [ 419s] [480/493] installing dconf-service-0.38.0-2 [ 419s] [481/493] installing dconf-gsettings-backend-0.38.0-2 [ 419s] [482/493] installing gsettings-desktop-schemas-3.38.0-2 [ 421s] [483/493] installing libgtk-3-common-3.24.24-4+deb11u2 [ 427s] [484/493] installing glib-networking-2.66.0-2 [ 432s] dpkg-deb (subprocess): decompressing archive '.init_b_cache/glib-networking.deb' (size=60748) member 'data.tar': lzma error: compressed data is corrupt [ 432s] dpkg-deb: error: <decompress> subprocess returned error exit status 2 [ 432s] dpkg: error processing archive .init_b_cache/glib-networking.deb (--install): [ 432s] cannot copy extracted data for './usr/lib/arm-linux-gnueabihf/gio/modules/libgiognomeproxy.so' to '/usr/lib/arm-linux-gnueabihf/gio/modules/libgiognomeproxy.so.dpkg-new': unexpected end of file or stream [ 432s] Errors were encountered while processing: [ 432s] .init_b_cache/glib-networking.deb [ 432s] exit ... [ 432s] ### VM INTERACTION START ### [ 433s] Failed to write wtmp record, ignoring: Read-only file system [ 433s] Failed to write utmp record: Read-only file system [ 433s] Powering off. [ 433s] [ 388.142484] reboot: Power down [ 433s] ### VM INTERACTION END ### [ 433s] [ 433s] armbuild02 failed "build osmo-msc_1.9.0.25.ba4d6.202210070052.dsc" at Fri Oct 7 03:42:34 UTC 2022. [ 433s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 8 months

1
0
0 0

Build failure of network:osmocom:nightly/osmo-bsc in Raspbian_11/armv7l

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o… Package network:osmocom:nightly/osmo-bsc failed to build in Raspbian_11/armv7l Check out the package for editing: osc checkout network:osmocom:nightly osmo-bsc Last lines of build log: [ 474s] [417/486] installing libsctp-dev-1.0.18+dfsg-1 [ 474s] [418/486] installing python3-3.9.2-3 [ 475s] [419/486] installing tipa-2:1.3-20.1 [ 480s] [420/486] installing libstdc++-10-dev-10.2.1-6+rpi1 [ 482s] [421/486] installing texlive-bibtex-extra-2020.20210202-3 [ 507s] [422/486] installing texlive-latex-recommended-2020.20210202-3 [ 512s] [423/486] installing libncurses-dev-6.2+20201114-2 [ 513s] [424/486] installing libtool-2.4.6-15 [ 513s] [425/486] installing login-1:4.8.1-1 [ 515s] [426/486] installing libpangomm-1.4-1v5-2.42.1-1 [ 515s] [427/486] installing librsvg2-2-2.50.3+dfsg-1 [ 517s] [428/486] installing libgvc6-2.42.2-5 [ 517s] [429/486] installing python3-funcparserlib-0.3.6+dfsg1-1 [ 518s] [430/486] installing python3-pkg-resources-52.0.0-4 [ 519s] [431/486] installing python3-roman-2.0.0-5 [ 539s] dpkg-deb (subprocess): decompressing archive '.init_b_cache/python3-roman.deb' (size=9064) member 'data.tar': lzma error: compressed data is corrupt [ 539s] dpkg-deb: error: <decompress> subprocess returned error exit status 2 [ 539s] dpkg: error processing archive .init_b_cache/python3-roman.deb (--install): [ 539s] dpkg-deb --fsys-tarfile subprocess returned error exit status 2 [ 539s] Errors were encountered while processing: [ 539s] .init_b_cache/python3-roman.deb [ 539s] exit ... [ 539s] ### VM INTERACTION START ### [ 540s] [ 356.988220] sysrq: SysRq : Power Off [ 540s] [ 356.990089] reboot: Power down [ 540s] ### VM INTERACTION END ### [ 540s] [ 540s] armbuild02 failed "build osmo-bsc_1.9.0.54.52fb5.202210070052.dsc" at Fri Oct 7 03:27:03 UTC 2022. [ 540s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 8 months

1
0
0 0

Build failure of network:osmocom:nightly/osmo-smlc in Raspbian_11/armv7l

by OBS Notification

Visit https://build.opensuse.org/package/live_build_log/network:osmocom:nightly/o… Package network:osmocom:nightly/osmo-smlc failed to build in Raspbian_11/armv7l Check out the package for editing: osc checkout network:osmocom:nightly osmo-smlc Last lines of build log: [ 474s] [414/474] installing login-1:4.8.1-1 [ 475s] [415/474] installing libpangomm-1.4-1v5-2.42.1-1 [ 475s] [416/474] installing librsvg2-2-2.50.3+dfsg-1 [ 477s] [417/474] installing libgvc6-2.42.2-5 [ 478s] [418/474] installing python3-funcparserlib-0.3.6+dfsg1-1 [ 479s] [419/474] installing python3-pkg-resources-52.0.0-4 [ 480s] [420/474] installing python3-roman-2.0.0-5 [ 480s] [421/474] installing python3-webcolors-1.11.1-1 [ 481s] [422/474] installing python3-reportlab-accel-3.5.59-2 [ 481s] [423/474] installing librsvg2-common-2.50.3+dfsg-1 [ 482s] [424/474] installing texlive-2020.20210202-3 [ 482s] [425/474] installing user-setup-1.88 [ 496s] dpkg-deb (subprocess): decompressing archive '.init_b_cache/user-setup.deb' (size=128076) member 'control.tar': lzma error: compressed data is corrupt [ 496s] tar: Unexpected EOF in archive [ 496s] tar: Unexpected EOF in archive [ 496s] tar: Error is not recoverable: exiting now [ 496s] dpkg-deb: error: tar subprocess returned error exit status 2 [ 496s] dpkg: error processing archive .init_b_cache/user-setup.deb (--install): [ 496s] dpkg-deb --control subprocess returned error exit status 2 [ 496s] Errors were encountered while processing: [ 496s] .init_b_cache/user-setup.deb [ 496s] exit ... [ 496s] ### VM INTERACTION START ### [ 498s] [ 398.654096] sysrq: SysRq : Power Off [ 498s] [ 398.655740] reboot: Power down [ 498s] ### VM INTERACTION END ### [ 498s] [ 498s] armbuild01 failed "build osmo-smlc_0.2.2.3.5185.202210070052.dsc" at Fri Oct 7 03:16:51 UTC 2022. [ 498s] -- Configure notifications at https://build.opensuse.org/my/subscriptions openSUSE Build Service (https://build.opensuse.org/)

2 years, 8 months

1
0
0 0

Change in osmo-ttcn3-hacks[master]: pcu: f_pcuif_tx_data_ind(): make waiting behavior configurable

by fixeria

Attention is currently required from: pespin. fixeria has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/29628 ) Change subject: pcu: f_pcuif_tx_data_ind(): make waiting behavior configurable ...................................................................... Patch Set 1: (1 comment) Commit Message: https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/29628/comment/f92d558c_bb8e… PS1, Line 11: dufferent TDMA TN (multi-slot TBFs). This change allows sending > different Done -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/29628 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I3200b8a2973f97f08714654e525c631da5d6e382 Gerrit-Change-Number: 29628 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-Attention: pespin <pespin(a)sysmocom.de> Gerrit-Comment-Date: Thu, 06 Oct 2022 19:03:26 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: comment

2 years, 8 months

1
0
0 0

2025

2024

2023

2022

gerrit-log October 2022