samba precondition

Hi, I think I found a small hardware bug while fixing the v1.0p boards (adding a 100nF capacitor near the LDO pin 4). When I want to put the SAM7S in SAM-BA mode (shorting TEST and 3.3V pins), it does not work, even after waiting a lot of time. The 2 LEDs are on, and when I touch PA0 (pin 48 on the right upper corner of the SAM7S, near the "A") with a piece of metal, the LEDs switch off and putting into SAM-BA mode works. maybe PA0 needs to be low/up but it is not connected and probably floating. The solution is easy, but should we correct that for the next version (if it is a real bug)? Also, simtrace seems to load sam_ba module, which I have to remove so I can use sam7util multiple times: sudo rmmod cdc_acm && sudo rmmod sam_ba && sudo ./sam7 --exec set_clock --exec unlock_regions --exec "flash ../openpcd/firmware/main_simtrace.samba" thanks, kevin