Re: Getting started - unable to connect to the device

On 01/30/2012 03:40 AM, Mat wrote:

Ok, let's go down the POSIX path:

$ sudo rmmod usbserial $ sudo modprobe usbserial vendor=0x03EB product=0x6124 $ sudo ./sam7 -l /dev/ttyUSB0 --exec set_clock --exec unlock_regions

• --exec "flash ../openpcd/firmware/main_simtrace.samba"

Page size info of not known $ sudo ./sam7 -l /dev/ttyUSB0 --exec set_clock --exec unlock_regions

• --exec "flash ../openpcd/firmware/main_simtrace.samba"

Hi,

try to enter the interactive mode and then issue the commands and see how far you get.

holger