This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)". The branch, master has been updated via 4b2d02d0372ae5dc88d97b06f5cfa92841cbf036 (commit) via baf0f94a7dd858eba37548253959747838b1cc16 (commit) via 9ff82892da2b58ba344b2f6e70256d08947b9c34 (commit) via 85ba655788b49dc83e33109368f81b7c3ea0b090 (commit) via 466cedd052427254d5f90b4bd02795129b2c60a4 (commit) via 07f6e36ab42380f9a4c1af058c3021cb0e945dc4 (commit) via 8000e0ea509c5a4488a5d1878f465418d32b7fdb (commit) via 929acdf6bf4ef25c8cc587a6aa48651696348881 (commit) via e988ae471d8e699a4045d77048986570349203fa (commit) via e671d254cbc294f87620c2938eb6fa2883253fcb (commit) via 555b2e5ac128211edffa34a586fe5f548eb3acba (commit) from 925c57fb545b072159a831bff852c92795704dfe (commit) Those revisions listed above that are new to this repository have not appeared on any other notification email; so we list those revisions in full, below. - Log ----------------------------------------------------------------- http://cgit.osmocom.org/openbsc/commit/?id=4b2d02d0372ae5dc88d97b06f5cfa928… commit 4b2d02d0372ae5dc88d97b06f5cfa92841cbf036 Author: Jacob Erlbeck &lt;jerlbeck(a)sysmocom.de&gt; Date: Fri Jan 30 11:57:25 2015 +0100 sgsn/test: Fix memory leak in test_subscriber_gsup Currently the MM context is not deleted when a GSUP location cancellation message is processed, because the real sgsn_update_subscriber_data function has been wrapped to a dummy implementation. This commit adds an explicit call to sgsn_mm_ctx_cleanup_free which also unassigns the LLME, so the call to gprs_llgmm_assign is removed. It also adds an assertion to check that there are no talloc'ed blocks left in tall_bsc_ctx. Addresses: == 372 bytes in 1 blocks are possibly lost in loss record 7 of 9 == at 0x402A17C: malloc (in /usr/lib/valgrind/vgpreload_memcheck-x86-linux.so) == by 0x4059FB8: _talloc_zero (talloc.c:354) == by 0x8055B82: sgsn_mm_ctx_alloc (gprs_sgsn.c:167) == by 0x804A336: alloc_mm_ctx (sgsn_test.c:140) == by 0x804B24D: test_subscriber_gsup (sgsn_test.c:503) == by 0x804EC99: main (sgsn_test.c:1853) Sponsored-by: On-Waves ehf http://cgit.osmocom.org/openbsc/commit/?id=baf0f94a7dd858eba375482539597478… commit baf0f94a7dd858eba37548253959747838b1cc16 Author: Jacob Erlbeck &lt;jerlbeck(a)sysmocom.de&gt; Date: Thu Jan 29 14:55:34 2015 +0100 sgsn/test: Add checks for subscr->error_cause This commits adds a few asserts that check the value of subscr->error_cause after a GSUP message has been received. Sponsored-by: On-Waves ehf http://cgit.osmocom.org/openbsc/commit/?id=9ff82892da2b58ba344b2f6e70256d08… commit 9ff82892da2b58ba344b2f6e70256d08947b9c34 Author: Jacob Erlbeck &lt;jerlbeck(a)sysmocom.de&gt; Date: Thu Jan 29 14:17:51 2015 +0100 gprs: Use 'Network failure' as default cause This commit adds a check after a GSUP message has been decoded whether it is an error message and does not contain a cause value. If his is the case, the cause value is set to 'Network failure', so that this cause if effectively the default value for error messages. Sponsored-by: On-Waves ehf http://cgit.osmocom.org/openbsc/commit/?id=85ba655788b49dc83e33109368f81b7c… commit 85ba655788b49dc83e33109368f81b7c3ea0b090 Author: Jacob Erlbeck &lt;jerlbeck(a)sysmocom.de&gt; Date: Thu Jan 29 14:15:54 2015 +0100 gprs/test: Fix GSUP Purge MS response messages Currently the message types for these message types are wrong. This patch inserts the correct message types. Sponsored-by: On-Waves ehf http://cgit.osmocom.org/openbsc/commit/?id=466cedd052427254d5f90b4bd0279512… commit 466cedd052427254d5f90b4bd02795129b2c60a4 Author: Jacob Erlbeck &lt;jerlbeck(a)sysmocom.de&gt; Date: Thu Jan 29 14:12:29 2015 +0100 sgsn/test: Add tests for PurgeMs responses Currently there are not any test cases for PurgeMS GSUP messages in test_subscriber_gsup. This commit adds tests for incoming PurgeMSResult and -Error messages. Sponsored-by: On-Waves ehf http://cgit.osmocom.org/openbsc/commit/?id=07f6e36ab42380f9a4c1af058c3021cb… commit 07f6e36ab42380f9a4c1af058c3021cb0e945dc4 Author: Jacob Erlbeck &lt;jerlbeck(a)sysmocom.de&gt; Date: Thu Jan 29 14:00:28 2015 +0100 gprs: Send GSUP error reply for requests without IMSI Currently gprs_subscr_rx_gsup_message returns immediately after it detects that an IMSI has not been given in the received GSUP message. While this is ok for responses (result or error), a request should always be answered. This commit adds code to reply with a corresponding error message ("Invalid mandatory information") when it receives a request without an IMSI. Note that the generated error message will not contain an IMSI either. Sponsored-by: On-Waves ehf http://cgit.osmocom.org/openbsc/commit/?id=8000e0ea509c5a4488a5d1878f465418… commit 8000e0ea509c5a4488a5d1878f465418d32b7fdb Author: Jacob Erlbeck &lt;jerlbeck(a)sysmocom.de&gt; Date: Tue Jan 27 14:56:40 2015 +0100 gprs: Support cancellation type The cancellation type that is part of the UpdateCancellation message is currently ignored. This patch adds the missing glue between the existing GSUP and GMM support. If the type is not present or has the value updateProcedure the subcriber and MM context are siliently removed. Otherwise, a message with cause 'implicitly detached' is sent to the MS. Since the real cause is not known (the specification neither added a cause IE nor defined a static cause value), the MS may get the real cause in the following AttachRej. Added VTY commands: - update-subscriber imsi IMSI cancel update-procedure - update-subscriber imsi IMSI cancel subscription-withdraw the old form without the cause is no longer supported. Sponsored-by: On-Waves ehf http://cgit.osmocom.org/openbsc/commit/?id=929acdf6bf4ef25c8cc587a6aa486516… commit 929acdf6bf4ef25c8cc587a6aa48651696348881 Author: Jacob Erlbeck &lt;jerlbeck(a)sysmocom.de&gt; Date: Tue Jan 27 13:47:24 2015 +0100 gprs: Handle PURGE MS ERR/RES without subscr Currently the subscr entry is no longer present, when PURGE MS ERROR/RESULT arrives. In this case, an unspecific notice is logged ('unknown IMSI'). This clutters up the logfile with notices even in perfectly normal operation. This commit changes the code path that is used when a subscr cannot be found for an incoming GSUP message. A check for PURGE MS RESULT and ERROR is added and gprs_subscr_handle_gsup_purge_no_subscr is called for these messages instead of gprs_subscr_handle_unknown_imsi. Sponsored-by: On-Waves ehf http://cgit.osmocom.org/openbsc/commit/?id=e988ae471d8e699a4045d77048986570… commit e988ae471d8e699a4045d77048986570349203fa Author: Jacob Erlbeck &lt;jerlbeck(a)sysmocom.de&gt; Date: Tue Jan 27 12:41:19 2015 +0100 gprs: Don't use subscr->keep_in_ram in normal operation Currently the keep_in_ram flag is explicitely reset in gprs_subscr_cleanup to cover the case, that the VTY 'create' sub-command has been used to create the subscriber entry. This commit completely removes keep_in_ram handling from gprs_subscriber.c and adds a VTY 'destroy' sub-command to reset the flag and remove the entry. So 'create' and 'destroy' can be used to manager sticky entries that are kept even when a location cancellation is done. Added VTY command: - update-subscriber imsi IMSI destroy Sponsored-by: On-Waves ehf http://cgit.osmocom.org/openbsc/commit/?id=e671d254cbc294f87620c2938eb6fa28… commit e671d254cbc294f87620c2938eb6fa2883253fcb Author: Jacob Erlbeck &lt;jerlbeck(a)sysmocom.de&gt; Date: Mon Jan 26 14:43:07 2015 +0100 sgsn: Add sgsn_mm_ctx_cleanup_free for safe shutdown Currently the MM context cleanup code is distributed over several functions. sgsn_mm_ctx_free not only frees data structure but also eventually stops the timer and does the subscriber clean-up. mm_ctx_cleanup_free (gprs_gmm.c) cleans up the PDP contexts and unassign the TLLI. This commit moves the cleanup code from both functions into a new unifying function sgsn_mm_ctx_cleanup_free that cares about the clean-up of all related sub-systems. Sponsored-by: On-Waves ehf http://cgit.osmocom.org/openbsc/commit/?id=555b2e5ac128211edffa34a586fe5f54… commit 555b2e5ac128211edffa34a586fe5f548eb3acba Author: Jacob Erlbeck &lt;jerlbeck(a)sysmocom.de&gt; Date: Mon Jan 26 13:52:42 2015 +0100 sgsn: Don't allow mmctx == NULL in sgsn_update_subscriber_data Currently, sgsn_update_subscriber_data can be called with mmctx == NULL and will find and associate the right context (if present) based on the subscriber's IMSI. This will not happen in regular use any more, since sgsn_update_subscriber_data will only be called when subscribers are used (auth mode 'remote') and in this case gprs_subscr_get_or_create_by_mmctx will already be called by sgsn_auth_request. Therefore, MM context and subscriber are always associated except for some test cases and experimental VTY usage. The current implementation of sgsn_update_subscriber_data also causes additional complexity for the deletion on MM contexts to avoid a ipossible double-free MM contexts. This commit removes the MM context <-> subscriber association code from sgsn_update_subscriber_data. That function must always be called with mmctx != NULL, now. To avoid problems with VTY and test usage, the calling subscriber function now only call sgsn_update_subscriber_data when mmctx != NULL, since the purpose of that function is to update that state of an existing MM context after subscriber data has been changed. Sponsored-by: On-Waves ehf ----------------------------------------------------------------------- Summary of changes: openbsc/include/openbsc/gprs_sgsn.h | 4 +- openbsc/src/gprs/gprs_gmm.c | 24 +--------- openbsc/src/gprs/gprs_sgsn.c | 60 +++++++++++++------------ openbsc/src/gprs/gprs_subscriber.c | 65 +++++++++++++++++++++++---- openbsc/src/gprs/sgsn_vty.c | 40 ++++++++++++++++- openbsc/tests/gprs/gprs_test.c | 4 +- openbsc/tests/sgsn/sgsn_test.c | 90 +++++++++++++++++++++++++++---------- openbsc/tests/vty_test_runner.py | 5 ++- 8 files changed, 202 insertions(+), 90 deletions(-) hooks/post-receive -- The OpenBSC GSM Base Station Controller (+MSC/HLR/SGSN)