 
            Well i finally got scope working, turns out the problem was when i plugged in my rtl it installed the dvb driver, so I had to use the sudo rmod probe command and remove the kernel I have scope up and running , I want to listen to 139.5600,(mhz) its p25 1 non-trunked, but I cant seem to find it with scope, and my fft plot is in khzAny sugestions on what to use for a ./scope command? Im using ./scope rtl=0 -f 139.5600M
Did anybody get the grc file I posted to work?
 
            ./scope.py --args 'rtl=0' -N 'LNA:50' -S 960000 -f 139.5600M -o 20000 -q -1.9 -v 0 -V
Change -q -1.9 to what your RTL PPM value is.
Forget about OP25 and GRC, it doesn't support it.
________________________________ From: op25-dev@yahoogroups.com op25-dev@yahoogroups.com on behalf of Sean Kealy superstardodge@yahoo.com [op25-dev] op25-dev@yahoogroups.com Sent: Friday, June 24, 2016 11:26 PM To: yahoogroups Subject: [op25-dev] scope
Well i finally got scope working, turns out the problem was when i plugged in my rtl it installed the dvb driver, so I had to use the sudo rmod probe command and remove the kernel
I have scope up and running , I want to listen to 139.5600,(mhz) its p25 1 non-trunked, but I cant seem to find it with scope, and my fft plot is in khz Any sugestions on what to use for a ./scope command? Im using ./scope rtl=0 -f 139.5600M
Did anybody get the grc file I posted to work?
 
            Ok thanks, how do I find out my devices ppm? So if the RTL doesnt support the op25 grc file, what do you recomend? funcube maybe or a usrp Thanks alot for your input been working on this for a long time and am thrilled that I actually have got it installed and up and running!
On Friday, June 24, 2016 10:23 PM, "Very Metal verymetl@hotmail.com [op25-dev]" op25-dev@yahoogroups.com wrote:
./scope.py --args 'rtl=0' -N 'LNA:50' -S 960000 -f 139.5600M -o 20000 -q -1.9 -v 0 -V Change -q -1.9 to what your RTL PPM value is. Forget about OP25 and GRC, it doesn't support it.
From: op25-dev@yahoogroups.com op25-dev@yahoogroups.com on behalf of Sean Kealy superstardodge@yahoo.com [op25-dev] op25-dev@yahoogroups.com Sent: Friday, June 24, 2016 11:26 PM To: yahoogroups Subject: [op25-dev] scope Well i finally got scope working, turns out the problem was when i plugged in my rtl it installed the dvb driver, so I had to use the sudo rmod probe command and remove the kernel I have scope up and running , I want to listen to 139.5600,(mhz) its p25 1 non-trunked, but I cant seem to find it with scope, and my fft plot is in khzAny sugestions on what to use for a ./scope command? Im using ./scope rtl=0 -f 139.5600M
Did anybody get the grc file I posted to work? #yiv9614822150 #yiv9614822150 -- #yiv9614822150ygrp-mkp {border:1px solid #d8d8d8;font-family:Arial;margin:10px 0;padding:0 10px;}#yiv9614822150 #yiv9614822150ygrp-mkp hr {border:1px solid #d8d8d8;}#yiv9614822150 #yiv9614822150ygrp-mkp #yiv9614822150hd {color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px 0;}#yiv9614822150 #yiv9614822150ygrp-mkp #yiv9614822150ads {margin-bottom:10px;}#yiv9614822150 #yiv9614822150ygrp-mkp .yiv9614822150ad {padding:0 0;}#yiv9614822150 #yiv9614822150ygrp-mkp .yiv9614822150ad p {margin:0;}#yiv9614822150 #yiv9614822150ygrp-mkp .yiv9614822150ad a {color:#0000ff;text-decoration:none;}#yiv9614822150 #yiv9614822150ygrp-sponsor #yiv9614822150ygrp-lc {font-family:Arial;}#yiv9614822150 #yiv9614822150ygrp-sponsor #yiv9614822150ygrp-lc #yiv9614822150hd {margin:10px 0px;font-weight:700;font-size:78%;line-height:122%;}#yiv9614822150 #yiv9614822150ygrp-sponsor #yiv9614822150ygrp-lc .yiv9614822150ad {margin-bottom:10px;padding:0 0;}#yiv9614822150 #yiv9614822150actions {font-family:Verdana;font-size:11px;padding:10px 0;}#yiv9614822150 #yiv9614822150activity {background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}#yiv9614822150 #yiv9614822150activity span {font-weight:700;}#yiv9614822150 #yiv9614822150activity span:first-child {text-transform:uppercase;}#yiv9614822150 #yiv9614822150activity span a {color:#5085b6;text-decoration:none;}#yiv9614822150 #yiv9614822150activity span span {color:#ff7900;}#yiv9614822150 #yiv9614822150activity span .yiv9614822150underline {text-decoration:underline;}#yiv9614822150 .yiv9614822150attach {clear:both;display:table;font-family:Arial;font-size:12px;padding:10px 0;width:400px;}#yiv9614822150 .yiv9614822150attach div a {text-decoration:none;}#yiv9614822150 .yiv9614822150attach img {border:none;padding-right:5px;}#yiv9614822150 .yiv9614822150attach label {display:block;margin-bottom:5px;}#yiv9614822150 .yiv9614822150attach label a {text-decoration:none;}#yiv9614822150 blockquote {margin:0 0 0 4px;}#yiv9614822150 .yiv9614822150bold {font-family:Arial;font-size:13px;font-weight:700;}#yiv9614822150 .yiv9614822150bold a {text-decoration:none;}#yiv9614822150 dd.yiv9614822150last p a {font-family:Verdana;font-weight:700;}#yiv9614822150 dd.yiv9614822150last p span {margin-right:10px;font-family:Verdana;font-weight:700;}#yiv9614822150 dd.yiv9614822150last p span.yiv9614822150yshortcuts {margin-right:0;}#yiv9614822150 div.yiv9614822150attach-table div div a {text-decoration:none;}#yiv9614822150 div.yiv9614822150attach-table {width:400px;}#yiv9614822150 div.yiv9614822150file-title a, #yiv9614822150 div.yiv9614822150file-title a:active, #yiv9614822150 div.yiv9614822150file-title a:hover, #yiv9614822150 div.yiv9614822150file-title a:visited {text-decoration:none;}#yiv9614822150 div.yiv9614822150photo-title a, #yiv9614822150 div.yiv9614822150photo-title a:active, #yiv9614822150 div.yiv9614822150photo-title a:hover, #yiv9614822150 div.yiv9614822150photo-title a:visited {text-decoration:none;}#yiv9614822150 div#yiv9614822150ygrp-mlmsg #yiv9614822150ygrp-msg p a span.yiv9614822150yshortcuts {font-family:Verdana;font-size:10px;font-weight:normal;}#yiv9614822150 .yiv9614822150green {color:#628c2a;}#yiv9614822150 .yiv9614822150MsoNormal {margin:0 0 0 0;}#yiv9614822150 o {font-size:0;}#yiv9614822150 #yiv9614822150photos div {float:left;width:72px;}#yiv9614822150 #yiv9614822150photos div div {border:1px solid #666666;height:62px;overflow:hidden;width:62px;}#yiv9614822150 #yiv9614822150photos div label {color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}#yiv9614822150 #yiv9614822150reco-category {font-size:77%;}#yiv9614822150 #yiv9614822150reco-desc {font-size:77%;}#yiv9614822150 .yiv9614822150replbq {margin:4px;}#yiv9614822150 #yiv9614822150ygrp-actbar div a:first-child {margin-right:2px;padding-right:5px;}#yiv9614822150 #yiv9614822150ygrp-mlmsg {font-size:13px;font-family:Arial, helvetica, clean, sans-serif;}#yiv9614822150 #yiv9614822150ygrp-mlmsg table {font-size:inherit;font:100%;}#yiv9614822150 #yiv9614822150ygrp-mlmsg select, #yiv9614822150 input, #yiv9614822150 textarea {font:99% Arial, Helvetica, clean, sans-serif;}#yiv9614822150 #yiv9614822150ygrp-mlmsg pre, #yiv9614822150 code {font:115% monospace;}#yiv9614822150 #yiv9614822150ygrp-mlmsg * {line-height:1.22em;}#yiv9614822150 #yiv9614822150ygrp-mlmsg #yiv9614822150logo {padding-bottom:10px;}#yiv9614822150 #yiv9614822150ygrp-msg p a {font-family:Verdana;}#yiv9614822150 #yiv9614822150ygrp-msg p#yiv9614822150attach-count span {color:#1E66AE;font-weight:700;}#yiv9614822150 #yiv9614822150ygrp-reco #yiv9614822150reco-head {color:#ff7900;font-weight:700;}#yiv9614822150 #yiv9614822150ygrp-reco {margin-bottom:20px;padding:0px;}#yiv9614822150 #yiv9614822150ygrp-sponsor #yiv9614822150ov li a {font-size:130%;text-decoration:none;}#yiv9614822150 #yiv9614822150ygrp-sponsor #yiv9614822150ov li {font-size:77%;list-style-type:square;padding:6px 0;}#yiv9614822150 #yiv9614822150ygrp-sponsor #yiv9614822150ov ul {margin:0;padding:0 0 0 8px;}#yiv9614822150 #yiv9614822150ygrp-text {font-family:Georgia;}#yiv9614822150 #yiv9614822150ygrp-text p {margin:0 0 1em 0;}#yiv9614822150 #yiv9614822150ygrp-text tt {font-size:120%;}#yiv9614822150 #yiv9614822150ygrp-vital ul li:last-child {border-right:none !important;}#yiv9614822150
 
            I think its .5 for the nooelec mini 2 blue rtl, going to try that
On Saturday, June 25, 2016 12:13 PM, "Sean Kealy superstardodge@yahoo.com [op25-dev]" op25-dev@yahoogroups.com wrote:
Ok thanks, how do I find out my devices ppm? So if the RTL doesnt support the op25 grc file, what do you recomend? funcube maybe or a usrp Thanks alot for your input been working on this for a long time and am thrilled that I actually have got it installed and up and running!
On Friday, June 24, 2016 10:23 PM, "Very Metal verymetl@hotmail.com [op25-dev]" op25-dev@yahoogroups.com wrote:
./scope.py --args 'rtl=0' -N 'LNA:50' -S 960000 -f 139.5600M -o 20000 -q -1.9 -v 0 -V Change -q -1.9 to what your RTL PPM value is. Forget about OP25 and GRC, it doesn't support it.
From: op25-dev@yahoogroups.com op25-dev@yahoogroups.com on behalf of Sean Kealy superstardodge@yahoo.com [op25-dev] op25-dev@yahoogroups.com Sent: Friday, June 24, 2016 11:26 PM To: yahoogroups Subject: [op25-dev] scope Well i finally got scope working, turns out the problem was when i plugged in my rtl it installed the dvb driver, so I had to use the sudo rmod probe command and remove the kernel I have scope up and running , I want to listen to 139.5600,(mhz) its p25 1 non-trunked, but I cant seem to find it with scope, and my fft plot is in khzAny sugestions on what to use for a ./scope command? Im using ./scope rtl=0 -f 139.5600M
Did anybody get the grc file I posted to work?
#yiv4482588991 #yiv4482588991 -- #yiv4482588991ygrp-mkp {border:1px solid #d8d8d8;font-family:Arial;margin:10px 0;padding:0 10px;}#yiv4482588991 #yiv4482588991ygrp-mkp hr {border:1px solid #d8d8d8;}#yiv4482588991 #yiv4482588991ygrp-mkp #yiv4482588991hd {color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px 0;}#yiv4482588991 #yiv4482588991ygrp-mkp #yiv4482588991ads {margin-bottom:10px;}#yiv4482588991 #yiv4482588991ygrp-mkp .yiv4482588991ad {padding:0 0;}#yiv4482588991 #yiv4482588991ygrp-mkp .yiv4482588991ad p {margin:0;}#yiv4482588991 #yiv4482588991ygrp-mkp .yiv4482588991ad a {color:#0000ff;text-decoration:none;}#yiv4482588991 #yiv4482588991ygrp-sponsor #yiv4482588991ygrp-lc {font-family:Arial;}#yiv4482588991 #yiv4482588991ygrp-sponsor #yiv4482588991ygrp-lc #yiv4482588991hd {margin:10px 0px;font-weight:700;font-size:78%;line-height:122%;}#yiv4482588991 #yiv4482588991ygrp-sponsor #yiv4482588991ygrp-lc .yiv4482588991ad {margin-bottom:10px;padding:0 0;}#yiv4482588991 #yiv4482588991actions {font-family:Verdana;font-size:11px;padding:10px 0;}#yiv4482588991 #yiv4482588991activity {background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}#yiv4482588991 #yiv4482588991activity span {font-weight:700;}#yiv4482588991 #yiv4482588991activity span:first-child {text-transform:uppercase;}#yiv4482588991 #yiv4482588991activity span a {color:#5085b6;text-decoration:none;}#yiv4482588991 #yiv4482588991activity span span {color:#ff7900;}#yiv4482588991 #yiv4482588991activity span .yiv4482588991underline {text-decoration:underline;}#yiv4482588991 .yiv4482588991attach {clear:both;display:table;font-family:Arial;font-size:12px;padding:10px 0;width:400px;}#yiv4482588991 .yiv4482588991attach div a {text-decoration:none;}#yiv4482588991 .yiv4482588991attach img {border:none;padding-right:5px;}#yiv4482588991 .yiv4482588991attach label {display:block;margin-bottom:5px;}#yiv4482588991 .yiv4482588991attach label a {text-decoration:none;}#yiv4482588991 blockquote {margin:0 0 0 4px;}#yiv4482588991 .yiv4482588991bold {font-family:Arial;font-size:13px;font-weight:700;}#yiv4482588991 .yiv4482588991bold a {text-decoration:none;}#yiv4482588991 dd.yiv4482588991last p a {font-family:Verdana;font-weight:700;}#yiv4482588991 dd.yiv4482588991last p span {margin-right:10px;font-family:Verdana;font-weight:700;}#yiv4482588991 dd.yiv4482588991last p span.yiv4482588991yshortcuts {margin-right:0;}#yiv4482588991 div.yiv4482588991attach-table div div a {text-decoration:none;}#yiv4482588991 div.yiv4482588991attach-table {width:400px;}#yiv4482588991 div.yiv4482588991file-title a, #yiv4482588991 div.yiv4482588991file-title a:active, #yiv4482588991 div.yiv4482588991file-title a:hover, #yiv4482588991 div.yiv4482588991file-title a:visited {text-decoration:none;}#yiv4482588991 div.yiv4482588991photo-title a, #yiv4482588991 div.yiv4482588991photo-title a:active, #yiv4482588991 div.yiv4482588991photo-title a:hover, #yiv4482588991 div.yiv4482588991photo-title a:visited {text-decoration:none;}#yiv4482588991 div#yiv4482588991ygrp-mlmsg #yiv4482588991ygrp-msg p a span.yiv4482588991yshortcuts {font-family:Verdana;font-size:10px;font-weight:normal;}#yiv4482588991 .yiv4482588991green {color:#628c2a;}#yiv4482588991 .yiv4482588991MsoNormal {margin:0 0 0 0;}#yiv4482588991 o {font-size:0;}#yiv4482588991 #yiv4482588991photos div {float:left;width:72px;}#yiv4482588991 #yiv4482588991photos div div {border:1px solid #666666;height:62px;overflow:hidden;width:62px;}#yiv4482588991 #yiv4482588991photos div label {color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}#yiv4482588991 #yiv4482588991reco-category {font-size:77%;}#yiv4482588991 #yiv4482588991reco-desc {font-size:77%;}#yiv4482588991 .yiv4482588991replbq {margin:4px;}#yiv4482588991 #yiv4482588991ygrp-actbar div a:first-child {margin-right:2px;padding-right:5px;}#yiv4482588991 #yiv4482588991ygrp-mlmsg {font-size:13px;font-family:Arial, helvetica, clean, sans-serif;}#yiv4482588991 #yiv4482588991ygrp-mlmsg table {font-size:inherit;font:100%;}#yiv4482588991 #yiv4482588991ygrp-mlmsg select, #yiv4482588991 input, #yiv4482588991 textarea {font:99% Arial, Helvetica, clean, sans-serif;}#yiv4482588991 #yiv4482588991ygrp-mlmsg pre, #yiv4482588991 code {font:115% monospace;}#yiv4482588991 #yiv4482588991ygrp-mlmsg * {line-height:1.22em;}#yiv4482588991 #yiv4482588991ygrp-mlmsg #yiv4482588991logo {padding-bottom:10px;}#yiv4482588991 #yiv4482588991ygrp-msg p a {font-family:Verdana;}#yiv4482588991 #yiv4482588991ygrp-msg p#yiv4482588991attach-count span {color:#1E66AE;font-weight:700;}#yiv4482588991 #yiv4482588991ygrp-reco #yiv4482588991reco-head {color:#ff7900;font-weight:700;}#yiv4482588991 #yiv4482588991ygrp-reco {margin-bottom:20px;padding:0px;}#yiv4482588991 #yiv4482588991ygrp-sponsor #yiv4482588991ov li a {font-size:130%;text-decoration:none;}#yiv4482588991 #yiv4482588991ygrp-sponsor #yiv4482588991ov li {font-size:77%;list-style-type:square;padding:6px 0;}#yiv4482588991 #yiv4482588991ygrp-sponsor #yiv4482588991ov ul {margin:0;padding:0 0 0 8px;}#yiv4482588991 #yiv4482588991ygrp-text {font-family:Georgia;}#yiv4482588991 #yiv4482588991ygrp-text p {margin:0 0 1em 0;}#yiv4482588991 #yiv4482588991ygrp-text tt {font-size:120%;}#yiv4482588991 #yiv4482588991ygrp-vital ul li:last-child {border-right:none !important;}#yiv4482588991
 
            That dongle has a TCXO which is specified to hold the receiver from varying more than 0.5 PPM. However, the device itself may still have a permanent offset. I have seen this offset as large as 30+ PPM on some dongles.
To determine the permanent offset for an individual device you need to compare it, using a 0.0 PPM offset, to a known stable frequency source. The ideal tool is a service monitor but for most monitoring purposes receiving a continuous transmitter over the air generally works well enough. NOAA weather radio or continuous duty trunking control channels are good candidates.
I haven't played with scope.py for a while, but if I remember right you can adjust the offset on the fly down in the lower left corner. Observe the signal of the transmitter in the spectrum display and adjust the offset until the frequency scale reads properly.
Brett
On Sat, Jun 25, 2016 at 2:45 PM, Sean Kealy superstardodge@yahoo.com [op25-dev] op25-dev@yahoogroups.com wrote:
I think its .5 for the nooelec mini 2 blue rtl, going to try that
On Saturday, June 25, 2016 12:13 PM, "Sean Kealy superstardodge@yahoo.com [op25-dev]" op25-dev@yahoogroups.com wrote:
Ok thanks, how do I find out my devices ppm?
 
            Ok , thanks brett looks like im around 20 using that method
On Saturday, June 25, 2016 12:45 PM, "Sean Kealy superstardodge@yahoo.com [op25-dev]" op25-dev@yahoogroups.com wrote:
I think its .5 for the nooelec mini 2 blue rtl, going to try that
On Saturday, June 25, 2016 12:13 PM, "Sean Kealy superstardodge@yahoo.com [op25-dev]" op25-dev@yahoogroups.com wrote:
Ok thanks, how do I find out my devices ppm? So if the RTL doesnt support the op25 grc file, what do you recomend? funcube maybe or a usrp Thanks alot for your input been working on this for a long time and am thrilled that I actually have got it installed and up and running!
On Friday, June 24, 2016 10:23 PM, "Very Metal verymetl@hotmail.com [op25-dev]" op25-dev@yahoogroups.com wrote:
./scope.py --args 'rtl=0' -N 'LNA:50' -S 960000 -f 139.5600M -o 20000 -q -1.9 -v 0 -V Change -q -1.9 to what your RTL PPM value is. Forget about OP25 and GRC, it doesn't support it.
From: op25-dev@yahoogroups.com op25-dev@yahoogroups.com on behalf of Sean Kealy superstardodge@yahoo.com [op25-dev] op25-dev@yahoogroups.com Sent: Friday, June 24, 2016 11:26 PM To: yahoogroups Subject: [op25-dev] scope Well i finally got scope working, turns out the problem was when i plugged in my rtl it installed the dvb driver, so I had to use the sudo rmod probe command and remove the kernel I have scope up and running , I want to listen to 139.5600,(mhz) its p25 1 non-trunked, but I cant seem to find it with scope, and my fft plot is in khzAny sugestions on what to use for a ./scope command? Im using ./scope rtl=0 -f 139.5600M
Did anybody get the grc file I posted to work?
#yiv8703582756 #yiv8703582756 -- #yiv8703582756ygrp-mkp {border:1px solid #d8d8d8;font-family:Arial;margin:10px 0;padding:0 10px;}#yiv8703582756 #yiv8703582756ygrp-mkp hr {border:1px solid #d8d8d8;}#yiv8703582756 #yiv8703582756ygrp-mkp #yiv8703582756hd {color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px 0;}#yiv8703582756 #yiv8703582756ygrp-mkp #yiv8703582756ads {margin-bottom:10px;}#yiv8703582756 #yiv8703582756ygrp-mkp .yiv8703582756ad {padding:0 0;}#yiv8703582756 #yiv8703582756ygrp-mkp .yiv8703582756ad p {margin:0;}#yiv8703582756 #yiv8703582756ygrp-mkp .yiv8703582756ad a {color:#0000ff;text-decoration:none;}#yiv8703582756 #yiv8703582756ygrp-sponsor #yiv8703582756ygrp-lc {font-family:Arial;}#yiv8703582756 #yiv8703582756ygrp-sponsor #yiv8703582756ygrp-lc #yiv8703582756hd {margin:10px 0px;font-weight:700;font-size:78%;line-height:122%;}#yiv8703582756 #yiv8703582756ygrp-sponsor #yiv8703582756ygrp-lc .yiv8703582756ad {margin-bottom:10px;padding:0 0;}#yiv8703582756 #yiv8703582756actions {font-family:Verdana;font-size:11px;padding:10px 0;}#yiv8703582756 #yiv8703582756activity {background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}#yiv8703582756 #yiv8703582756activity span {font-weight:700;}#yiv8703582756 #yiv8703582756activity span:first-child {text-transform:uppercase;}#yiv8703582756 #yiv8703582756activity span a {color:#5085b6;text-decoration:none;}#yiv8703582756 #yiv8703582756activity span span {color:#ff7900;}#yiv8703582756 #yiv8703582756activity span .yiv8703582756underline {text-decoration:underline;}#yiv8703582756 .yiv8703582756attach {clear:both;display:table;font-family:Arial;font-size:12px;padding:10px 0;width:400px;}#yiv8703582756 .yiv8703582756attach div a {text-decoration:none;}#yiv8703582756 .yiv8703582756attach img {border:none;padding-right:5px;}#yiv8703582756 .yiv8703582756attach label {display:block;margin-bottom:5px;}#yiv8703582756 .yiv8703582756attach label a {text-decoration:none;}#yiv8703582756 blockquote {margin:0 0 0 4px;}#yiv8703582756 .yiv8703582756bold {font-family:Arial;font-size:13px;font-weight:700;}#yiv8703582756 .yiv8703582756bold a {text-decoration:none;}#yiv8703582756 dd.yiv8703582756last p a {font-family:Verdana;font-weight:700;}#yiv8703582756 dd.yiv8703582756last p span {margin-right:10px;font-family:Verdana;font-weight:700;}#yiv8703582756 dd.yiv8703582756last p span.yiv8703582756yshortcuts {margin-right:0;}#yiv8703582756 div.yiv8703582756attach-table div div a {text-decoration:none;}#yiv8703582756 div.yiv8703582756attach-table {width:400px;}#yiv8703582756 div.yiv8703582756file-title a, #yiv8703582756 div.yiv8703582756file-title a:active, #yiv8703582756 div.yiv8703582756file-title a:hover, #yiv8703582756 div.yiv8703582756file-title a:visited {text-decoration:none;}#yiv8703582756 div.yiv8703582756photo-title a, #yiv8703582756 div.yiv8703582756photo-title a:active, #yiv8703582756 div.yiv8703582756photo-title a:hover, #yiv8703582756 div.yiv8703582756photo-title a:visited {text-decoration:none;}#yiv8703582756 div#yiv8703582756ygrp-mlmsg #yiv8703582756ygrp-msg p a span.yiv8703582756yshortcuts {font-family:Verdana;font-size:10px;font-weight:normal;}#yiv8703582756 .yiv8703582756green {color:#628c2a;}#yiv8703582756 .yiv8703582756MsoNormal {margin:0 0 0 0;}#yiv8703582756 o {font-size:0;}#yiv8703582756 #yiv8703582756photos div {float:left;width:72px;}#yiv8703582756 #yiv8703582756photos div div {border:1px solid #666666;height:62px;overflow:hidden;width:62px;}#yiv8703582756 #yiv8703582756photos div label {color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}#yiv8703582756 #yiv8703582756reco-category {font-size:77%;}#yiv8703582756 #yiv8703582756reco-desc {font-size:77%;}#yiv8703582756 .yiv8703582756replbq {margin:4px;}#yiv8703582756 #yiv8703582756ygrp-actbar div a:first-child {margin-right:2px;padding-right:5px;}#yiv8703582756 #yiv8703582756ygrp-mlmsg {font-size:13px;font-family:Arial, helvetica, clean, sans-serif;}#yiv8703582756 #yiv8703582756ygrp-mlmsg table {font-size:inherit;font:100%;}#yiv8703582756 #yiv8703582756ygrp-mlmsg select, #yiv8703582756 input, #yiv8703582756 textarea {font:99% Arial, Helvetica, clean, sans-serif;}#yiv8703582756 #yiv8703582756ygrp-mlmsg pre, #yiv8703582756 code {font:115% monospace;}#yiv8703582756 #yiv8703582756ygrp-mlmsg * {line-height:1.22em;}#yiv8703582756 #yiv8703582756ygrp-mlmsg #yiv8703582756logo {padding-bottom:10px;}#yiv8703582756 #yiv8703582756ygrp-msg p a {font-family:Verdana;}#yiv8703582756 #yiv8703582756ygrp-msg p#yiv8703582756attach-count span {color:#1E66AE;font-weight:700;}#yiv8703582756 #yiv8703582756ygrp-reco #yiv8703582756reco-head {color:#ff7900;font-weight:700;}#yiv8703582756 #yiv8703582756ygrp-reco {margin-bottom:20px;padding:0px;}#yiv8703582756 #yiv8703582756ygrp-sponsor #yiv8703582756ov li a {font-size:130%;text-decoration:none;}#yiv8703582756 #yiv8703582756ygrp-sponsor #yiv8703582756ov li {font-size:77%;list-style-type:square;padding:6px 0;}#yiv8703582756 #yiv8703582756ygrp-sponsor #yiv8703582756ov ul {margin:0;padding:0 0 0 8px;}#yiv8703582756 #yiv8703582756ygrp-text {font-family:Georgia;}#yiv8703582756 #yiv8703582756ygrp-text p {margin:0 0 1em 0;}#yiv8703582756 #yiv8703582756ygrp-text tt {font-size:120%;}#yiv8703582756 #yiv8703582756ygrp-vital ul li:last-child {border-right:none !important;}#yiv8703582756
 
            Ok I manged to get scope working but have a weak signal, getting a garbled conversation,I used ./scope.py --args 'rtl=0' -N 'LNA;50' -S 960000 -139.4200M -o 2000 -q -2.0 -v 0 -V to run scope, but I have to have my fine tune maxed at -3000 to get anything and get the correct pattern on constellation,What should I change in my command line(.scope.py) to improve the tuning? any ideas
On Saturday, June 25, 2016 2:24 PM, "Sean Kealy superstardodge@yahoo.com [op25-dev]" op25-dev@yahoogroups.com wrote:
Ok , thanks brett looks like im around 20 using that method
On Saturday, June 25, 2016 12:45 PM, "Sean Kealy superstardodge@yahoo.com [op25-dev]" op25-dev@yahoogroups.com wrote:
I think its .5 for the nooelec mini 2 blue rtl, going to try that
On Saturday, June 25, 2016 12:13 PM, "Sean Kealy superstardodge@yahoo.com [op25-dev]" op25-dev@yahoogroups.com wrote:
Ok thanks, how do I find out my devices ppm? So if the RTL doesnt support the op25 grc file, what do you recomend? funcube maybe or a usrp Thanks alot for your input been working on this for a long time and am thrilled that I actually have got it installed and up and running!
On Friday, June 24, 2016 10:23 PM, "Very Metal verymetl@hotmail.com [op25-dev]" op25-dev@yahoogroups.com wrote:
./scope.py --args 'rtl=0' -N 'LNA:50' -S 960000 -f 139.5600M -o 20000 -q -1.9 -v 0 -V Change -q -1.9 to what your RTL PPM value is. Forget about OP25 and GRC, it doesn't support it.
From: op25-dev@yahoogroups.com op25-dev@yahoogroups.com on behalf of Sean Kealy superstardodge@yahoo.com [op25-dev] op25-dev@yahoogroups.com Sent: Friday, June 24, 2016 11:26 PM To: yahoogroups Subject: [op25-dev] scope Well i finally got scope working, turns out the problem was when i plugged in my rtl it installed the dvb driver, so I had to use the sudo rmod probe command and remove the kernel I have scope up and running , I want to listen to 139.5600,(mhz) its p25 1 non-trunked, but I cant seem to find it with scope, and my fft plot is in khzAny sugestions on what to use for a ./scope command? Im using ./scope rtl=0 -f 139.5600M
Did anybody get the grc file I posted to work?
#yiv3139041391 #yiv3139041391 -- #yiv3139041391ygrp-mkp {border:1px solid #d8d8d8;font-family:Arial;margin:10px 0;padding:0 10px;}#yiv3139041391 #yiv3139041391ygrp-mkp hr {border:1px solid #d8d8d8;}#yiv3139041391 #yiv3139041391ygrp-mkp #yiv3139041391hd {color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px 0;}#yiv3139041391 #yiv3139041391ygrp-mkp #yiv3139041391ads {margin-bottom:10px;}#yiv3139041391 #yiv3139041391ygrp-mkp .yiv3139041391ad {padding:0 0;}#yiv3139041391 #yiv3139041391ygrp-mkp .yiv3139041391ad p {margin:0;}#yiv3139041391 #yiv3139041391ygrp-mkp .yiv3139041391ad a {color:#0000ff;text-decoration:none;}#yiv3139041391 #yiv3139041391ygrp-sponsor #yiv3139041391ygrp-lc {font-family:Arial;}#yiv3139041391 #yiv3139041391ygrp-sponsor #yiv3139041391ygrp-lc #yiv3139041391hd {margin:10px 0px;font-weight:700;font-size:78%;line-height:122%;}#yiv3139041391 #yiv3139041391ygrp-sponsor #yiv3139041391ygrp-lc .yiv3139041391ad {margin-bottom:10px;padding:0 0;}#yiv3139041391 #yiv3139041391actions {font-family:Verdana;font-size:11px;padding:10px 0;}#yiv3139041391 #yiv3139041391activity {background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}#yiv3139041391 #yiv3139041391activity span {font-weight:700;}#yiv3139041391 #yiv3139041391activity span:first-child {text-transform:uppercase;}#yiv3139041391 #yiv3139041391activity span a {color:#5085b6;text-decoration:none;}#yiv3139041391 #yiv3139041391activity span span {color:#ff7900;}#yiv3139041391 #yiv3139041391activity span .yiv3139041391underline {text-decoration:underline;}#yiv3139041391 .yiv3139041391attach {clear:both;display:table;font-family:Arial;font-size:12px;padding:10px 0;width:400px;}#yiv3139041391 .yiv3139041391attach div a {text-decoration:none;}#yiv3139041391 .yiv3139041391attach img {border:none;padding-right:5px;}#yiv3139041391 .yiv3139041391attach label {display:block;margin-bottom:5px;}#yiv3139041391 .yiv3139041391attach label a {text-decoration:none;}#yiv3139041391 blockquote {margin:0 0 0 4px;}#yiv3139041391 .yiv3139041391bold {font-family:Arial;font-size:13px;font-weight:700;}#yiv3139041391 .yiv3139041391bold a {text-decoration:none;}#yiv3139041391 dd.yiv3139041391last p a {font-family:Verdana;font-weight:700;}#yiv3139041391 dd.yiv3139041391last p span {margin-right:10px;font-family:Verdana;font-weight:700;}#yiv3139041391 dd.yiv3139041391last p span.yiv3139041391yshortcuts {margin-right:0;}#yiv3139041391 div.yiv3139041391attach-table div div a {text-decoration:none;}#yiv3139041391 div.yiv3139041391attach-table {width:400px;}#yiv3139041391 div.yiv3139041391file-title a, #yiv3139041391 div.yiv3139041391file-title a:active, #yiv3139041391 div.yiv3139041391file-title a:hover, #yiv3139041391 div.yiv3139041391file-title a:visited {text-decoration:none;}#yiv3139041391 div.yiv3139041391photo-title a, #yiv3139041391 div.yiv3139041391photo-title a:active, #yiv3139041391 div.yiv3139041391photo-title a:hover, #yiv3139041391 div.yiv3139041391photo-title a:visited {text-decoration:none;}#yiv3139041391 div#yiv3139041391ygrp-mlmsg #yiv3139041391ygrp-msg p a span.yiv3139041391yshortcuts {font-family:Verdana;font-size:10px;font-weight:normal;}#yiv3139041391 .yiv3139041391green {color:#628c2a;}#yiv3139041391 .yiv3139041391MsoNormal {margin:0 0 0 0;}#yiv3139041391 o {font-size:0;}#yiv3139041391 #yiv3139041391photos div {float:left;width:72px;}#yiv3139041391 #yiv3139041391photos div div {border:1px solid #666666;height:62px;overflow:hidden;width:62px;}#yiv3139041391 #yiv3139041391photos div label {color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}#yiv3139041391 #yiv3139041391reco-category {font-size:77%;}#yiv3139041391 #yiv3139041391reco-desc {font-size:77%;}#yiv3139041391 .yiv3139041391replbq {margin:4px;}#yiv3139041391 #yiv3139041391ygrp-actbar div a:first-child {margin-right:2px;padding-right:5px;}#yiv3139041391 #yiv3139041391ygrp-mlmsg {font-size:13px;font-family:Arial, helvetica, clean, sans-serif;}#yiv3139041391 #yiv3139041391ygrp-mlmsg table {font-size:inherit;font:100%;}#yiv3139041391 #yiv3139041391ygrp-mlmsg select, #yiv3139041391 input, #yiv3139041391 textarea {font:99% Arial, Helvetica, clean, sans-serif;}#yiv3139041391 #yiv3139041391ygrp-mlmsg pre, #yiv3139041391 code {font:115% monospace;}#yiv3139041391 #yiv3139041391ygrp-mlmsg * {line-height:1.22em;}#yiv3139041391 #yiv3139041391ygrp-mlmsg #yiv3139041391logo {padding-bottom:10px;}#yiv3139041391 #yiv3139041391ygrp-msg p a {font-family:Verdana;}#yiv3139041391 #yiv3139041391ygrp-msg p#yiv3139041391attach-count span {color:#1E66AE;font-weight:700;}#yiv3139041391 #yiv3139041391ygrp-reco #yiv3139041391reco-head {color:#ff7900;font-weight:700;}#yiv3139041391 #yiv3139041391ygrp-reco {margin-bottom:20px;padding:0px;}#yiv3139041391 #yiv3139041391ygrp-sponsor #yiv3139041391ov li a {font-size:130%;text-decoration:none;}#yiv3139041391 #yiv3139041391ygrp-sponsor #yiv3139041391ov li {font-size:77%;list-style-type:square;padding:6px 0;}#yiv3139041391 #yiv3139041391ygrp-sponsor #yiv3139041391ov ul {margin:0;padding:0 0 0 8px;}#yiv3139041391 #yiv3139041391ygrp-text {font-family:Georgia;}#yiv3139041391 #yiv3139041391ygrp-text p {margin:0 0 1em 0;}#yiv3139041391 #yiv3139041391ygrp-text tt {font-size:120%;}#yiv3139041391 #yiv3139041391ygrp-vital ul li:last-child {border-right:none !important;}#yiv3139041391


