op25-dev July 2016

op25-dev@lists.osmocom.org

1 participants
6 discussions

by gregella53＠gmail.com [op25-dev]

I know that a while back there was a grc flowraph of op25 that handled DES. Any chance of a pybombs recipe for op25 that handles RC4 as implemented in Advanced Digital Privacy?

7 years, 2 months

Migration of op25.osmocom.org ?

by Harald Welte laforge＠gnumonks.org [op25-dev]

Dear all, the op25.osmocom.org site is currently a lxc (linxu container) setup on one of my servers, and it frequently locks up the entire container every so often, without any reason why. I have failed to find the root cause of this and given up by now. As all of the other osmocom projects have meanwhile migrated away from trac to the redmine based setup at http://projects.osmocom.org/, I would stongly suggest the OP25 project to migrate there, too. This would include: * migration of the wiki pages (Holger has some semi-automatic process for that which imports the content but still requires manual fix-up of a lot of formatting) * migration of the tickets (Holger also did that programmatically for the other projects) * import of the SVN repository to our git server (see http://git.osmocom.org) Is there a way we can encourage the current active OP25 community to go ahead with the above migration? In the end, the closer you align in terms of infrastructure with the other osmocom.org projects, the more likely it is that the content will be available, systems and software updated, content backed up, etc. I think in the end, it would be better for everyone - including me for being responsible that the site is currently down very often. Regards, Harald -- - Harald Welte <laforge(a)gnumonks.org> http://laforge.gnumonks.org/ ============================================================================ "Privacy in residential applications is a desirable marketing option." (ETSI EN 300 175-7 Ch. A6)

7 years, 9 months

Re: [op25-dev] Re: Wireshark P25 patch

by Steve Glass stevie.glass＠gmail.com [op25-dev]

I've not updated the patch for ages but I shall prepare a patch for the latest Wireshark ASAP. ATB Steve

7 years, 10 months

new recipe for building OP25

by ikj1234i＠yahoo.com [op25-dev]

Historically the use of pybombs to install OP25 has been very helpful since it takes care of building all the needed prerequisite software. This is no longer necessary as of Ubuntu 14.04, which installs the 3.7 version of gnuradio. As a result we have a new install method that takes 95% less time than the old pybombs method, is less error-prone, and requires no more RAM than a base install of Linux. You can run this install in a machine with 1GB of RAM, although 2GB is recommended (this recommendation comes from ubuntu, and is caused by the memory-hog GUI - OP25 by itself currently does not require 2GB to compile, now that a source build of gnuradio is no longer required)... This recipe has been tested on ubuntu 14.04 only, it is likely NOT to work in either 12.04 or 16.04... First, use these commands to install the pre-reqs sudo apt-get update sudo apt-get build-dep gnuradio sudo apt-get install gnuradio gnuradio-dev gr-osmosdr librtlsdr-dev libuhd-dev libhackrf-dev libitpp-dev libpcap-dev git Second, use these commands to build and install OP25: [Note, the mkdir build; cd build; cmake ../; make; sudo make install sequence is a bog-standard form when source-building apps that utilize cmake.] cd ~ git clone git://op25.osmocom.org/op25.git cd op25 mkdir build cd build cmake ../ make sudo make install sudo ldconfig Finally you may need to use the command sudo rmmod dvb_usb_rtl28xxu to remove the DVB kernel module that conflicts with the RTL USB SDR. You may also need to edit the system udev rules for the RTL -both are common issues and you can search for the needed resources if the RTL isn't getting recognized... Once this is all done (no longer a need to source any env commands into the shell) you should be ready to invoke scope.py, which is the principal OP25 GUI app... As a pre-check, you can also run the osmocom_fft application (which should install as part of the pre-reqs) to test basic RTL connectivity and rule out related problems before invoking scope.py... I would appreciate feedback and especially any trouble reports when using these procedures. If all is OK we'll add this to the wiki... 73 Max

8 years, 1 month

key error NAC

by Sean Kealy superstardodge＠yahoo.com [op25-dev]

anybody get a key error NAC when trying to run thier trunking(trunk.tsv) in scope?I know Im entering a good NAC code, what givesstring is below frame = stdframe (self.top_block_maker, self.title, self._nstatus) File "/usr/local/lib/python2.7/dist-packages/gnuradio/wxgui/stdgui2.py", line 76, in __init__ self.panel = stdpanel (self, self, top_block_maker) File "/usr/local/lib/python2.7/dist-packages/gnuradio/wxgui/stdgui2.py", line 98, in __init__ self.top_block = top_block_maker (frame, self, vbox, sys.argv) File "./scope.py", line 213, in __init__ self.open_usrp() File "./scope.py", line 1158, in open_usrp self.__set_rx_from_osmosdr() File "./scope.py", line 907, in __set_rx_from_osmosdr self.__build_graph(self.src, capture_rate) File "./scope.py", line 261, in __build_graph self.trunk_rx = trunking.rx_ctl(frequency_set = self.change_freq, debug = self.options.verbosity, conf_file = self.options.trunk_conf_file) File "/home/sean/sdr/op25/op25/gr-op25_repeater/apps/trunking.py", line 404, in __init__ self.build_config_tsv(conf_file) File "/home/sean/sdr/op25/op25/gr-op25_repeater/apps/trunking.py", line 446, in build_config_tsv nac = int(fields['nac'], 0) KeyError: 'nac'

8 years, 3 months

Where is the recipe?

by lists＠lazygranch.com [op25-dev]

8 years, 3 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

op25-dev July 2016