Hi,
I hadn't messed with this for a while, but I decided to re-install OP25 tonight because someone suggested that maybe the error correction had not installed properly.
The re-install went smooth, but the Wireshark results are the same. In addition I notice that if I modulate (speak into the P25 radio mic) I get some errors in Wireshark as well as in the terminal window that WS is running (with a silent carrier I don't get the errors). Below are the errors. This confuses me because when I run OP25 without the Wireshark switch and in the mode where it decodes audio it sounds perfect.
22:21:13 Warn Dissector bug, protocol P25 CAI, in packet 408: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:14 Warn Dissector bug, protocol P25 CAI, in packet 461: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:14 Warn Dissector bug, protocol P25 CAI, in packet 463: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:14 Warn Dissector bug, protocol P25 CAI, in packet 464: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:14 Warn Dissector bug, protocol P25 CAI, in packet 465: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:14 Warn Dissector bug, protocol P25 CAI, in packet 468: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:14 Warn Dissector bug, protocol P25 CAI, in packet 471: packet-p25cai.c:1453: failed assertion "state != -1" 22:21:15 Warn Dissector bug, protocol P25 CAI, in packet 509: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:15 Warn Dissector bug, protocol P25 CAI, in packet 513: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:15 Warn Dissector bug, protocol P25 CAI, in packet 514: packet-p25cai.c:1453: failed assertion "state != -1" 22:21:15 Warn Dissector bug, protocol P25 CAI, in packet 515: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:15 Warn Dissector bug, protocol P25 CAI, in packet 516: column-ut
Thanks.
Hi,
Is op25.osmocom.org http://op25.osmocom.org/ http://op25.osmocom.net/down? I have not been able to get to the site for a few days, however the main osmocom.org http://osmocom.org/ still works for me.
thanks, Joe
On Dec 12, 2014, at 12:58 AM, logitec1830@aol.com [op25-dev] op25-dev@yahoogroups.com wrote:
Hi,
I hadn't messed with this for a while, but I decided to re-install OP25 tonight because someone suggested that maybe the error correction had not installed properly.
The re-install went smooth, but the Wireshark results are the same. In addition I notice that if I modulate (speak into the P25 radio mic) I get some errors in Wireshark as well as in the terminal window that WS is running (with a silent carrier I don't get the errors). Below are the errors. This confuses me because when I run OP25 without the Wireshark switch and in the mode where it decodes audio it sounds perfect.
22:21:13 Warn Dissector bug, protocol P25 CAI, in packet 408: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:14 Warn Dissector bug, protocol P25 CAI, in packet 461: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:14 Warn Dissector bug, protocol P25 CAI, in packet 463: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:14 Warn Dissector bug, protocol P25 CAI, in packet 464: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:14 Warn Dissector bug, protocol P25 CAI, in packet 465: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:14 Warn Dissector bug, protocol P25 CAI, in packet 468: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:14 Warn Dissector bug, protocol P25 CAI, in packet 471: packet-p25cai.c:1453: failed assertion "state != -1" 22:21:15 Warn Dissector bug, protocol P25 CAI, in packet 509: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:15 Warn Dissector bug, protocol P25 CAI, in packet 513: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:15 Warn Dissector bug, protocol P25 CAI, in packet 514: packet-p25cai.c:1453: failed assertion "state != -1" 22:21:15 Warn Dissector bug, protocol P25 CAI, in packet 515: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:15 Warn Dissector bug, protocol P25 CAI, in packet 516: column-ut
Thanks.
This has happened before, the last time they mentioned it on the GnuRadio group or some other. Someone or something hosed their server and it took a couple weeks to be brought back up. Dom
On Dec 26, 2014, at 3:13 PM, Joseph Cardani jcardani@verizon.net [op25-dev] op25-dev@yahoogroups.com wrote:
Hi,
Is op25.osmocom.org http://op25.osmocom.org/ http://op25.osmocom.net/down? I have not been able to get to the site for a few days, however the main osmocom.org http://osmocom.org/ still works for me.
thanks, Joe
On Dec 12, 2014, at 12:58 AM, logitec1830@aol.com mailto:logitec1830@aol.com [op25-dev] <op25-dev@yahoogroups.com mailto:op25-dev@yahoogroups.com> wrote:
Hi,
I hadn't messed with this for a while, but I decided to re-install OP25 tonight because someone suggested that maybe the error correction had not installed properly.
The re-install went smooth, but the Wireshark results are the same. In addition I notice that if I modulate (speak into the P25 radio mic) I get some errors in Wireshark as well as in the terminal window that WS is running (with a silent carrier I don't get the errors). Below are the errors. This confuses me because when I run OP25 without the Wireshark switch and in the mode where it decodes audio it sounds perfect.
22:21:13 Warn Dissector bug, protocol P25 CAI, in packet 408: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:14 Warn Dissector bug, protocol P25 CAI, in packet 461: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:14 Warn Dissector bug, protocol P25 CAI, in packet 463: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:14 Warn Dissector bug, protocol P25 CAI, in packet 464: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:14 Warn Dissector bug, protocol P25 CAI, in packet 465: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:14 Warn Dissector bug, protocol P25 CAI, in packet 468: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:14 Warn Dissector bug, protocol P25 CAI, in packet 471: packet-p25cai.c:1453: failed assertion "state != -1" 22:21:15 Warn Dissector bug, protocol P25 CAI, in packet 509: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:15 Warn Dissector bug, protocol P25 CAI, in packet 513: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:15 Warn Dissector bug, protocol P25 CAI, in packet 514: packet-p25cai.c:1453: failed assertion "state != -1" 22:21:15 Warn Dissector bug, protocol P25 CAI, in packet 515: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:15 Warn Dissector bug, protocol P25 CAI, in packet 516: column-ut
Thanks.
Thanks Dom!
Joe
On Dec 26, 2014, at 3:50 PM, Dominic H Weston dhweston@hotmail.com [op25-dev] op25-dev@yahoogroups.com wrote:
This has happened before, the last time they mentioned it on the
GnuRadio group or some other. Someone or something hosed their server and it took a couple weeks to be brought back up. Dom
On Dec 26, 2014, at 3:13 PM, Joseph Cardani jcardani@verizon.net mailto:jcardani@verizon.net [op25-dev] <op25-dev@yahoogroups.com mailto:op25-dev@yahoogroups.com> wrote:
Hi,
Is op25.osmocom.org http://op25.osmocom.org/ http://op25.osmocom.net/down? I have not been able to get to the site for a few days, however the main osmocom.org http://osmocom.org/ still works for me.
thanks, Joe
On Dec 12, 2014, at 12:58 AM, logitec1830@aol.com mailto:logitec1830@aol.com [op25-dev] <op25-dev@yahoogroups.com mailto:op25-dev@yahoogroups.com> wrote:
Hi,
I hadn't messed with this for a while, but I decided to re-install OP25 tonight because someone suggested that maybe the error correction had not installed properly.
The re-install went smooth, but the Wireshark results are the same. In addition I notice that if I modulate (speak into the P25 radio mic) I get some errors in Wireshark as well as in the terminal window that WS is running (with a silent carrier I don't get the errors). Below are the errors. This confuses me because when I run OP25 without the Wireshark switch and in the mode where it decodes audio it sounds perfect.
22:21:13 Warn Dissector bug, protocol P25 CAI, in packet 408: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:14 Warn Dissector bug, protocol P25 CAI, in packet 461: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:14 Warn Dissector bug, protocol P25 CAI, in packet 463: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:14 Warn Dissector bug, protocol P25 CAI, in packet 464: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:14 Warn Dissector bug, protocol P25 CAI, in packet 465: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:14 Warn Dissector bug, protocol P25 CAI, in packet 468: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:14 Warn Dissector bug, protocol P25 CAI, in packet 471: packet-p25cai.c:1453: failed assertion "state != -1" 22:21:15 Warn Dissector bug, protocol P25 CAI, in packet 509: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:15 Warn Dissector bug, protocol P25 CAI, in packet 513: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:15 Warn Dissector bug, protocol P25 CAI, in packet 514: packet-p25cai.c:1453: failed assertion "state != -1" 22:21:15 Warn Dissector bug, protocol P25 CAI, in packet 515: column-utils.c:482: failed assertion "!ep_verify_pointer(str)" 22:21:15 Warn Dissector bug, protocol P25 CAI, in packet 516: column-ut
Thanks.
Hi All,
Does anyone have scope.py and other pages from the OP25 website saved? Since the site is down I cannot access the command args, examples, and instructions.
I just purchased an B200 USRP and would like to get up and running. mtindor and Scott are assisting at Radio Reference also, but the OP25 stuff would be helpful.
thanks!
I'm also looking for command args, examples, and instructions. Thanks Don
Howdy, I have found the SignalScopePage – OP25 WORKING for Me !!!
| | | | | | | | | | | SignalScopePage – OP25Signal Scope Installation Before running the scope app, check that the following standard pre-requisite packages are also installed: GNU Radio The op25 blocks The o... | | | | View on op25.osmocom.org | Preview by Yahoo | | | | |
WireSharkPage – OP25 | | | | | | | | | | | WireSharkPage – OP25Extending Wireshark The WireShark packet sniffer normally doesn't support APCO P25. If you want to sniff P25 traffic using WireShark then you'll need to patch the s... | | | | View on op25.osmocom.org | Preview by Yahoo | | | | |
Does this help you at all?Let me know if you need more help.Happy New YearWOW - How's that B200 USRP working. I wanna step up from RTL2832U.My OP25 decode is killer, can't imagine how things would be with a B200...Thanks, DonSacramento, Ca.
Hi Don,
Yes the page came back yesterday.
thanks!
Joe
On Jan 3, 2015, at 10:57 AM, Don Adams busterphenajo@yahoo.com [op25-dev] op25-dev@yahoogroups.com wrote:
Howdy, I have found the SignalScopePage – OP25 http://op25.osmocom.org/trac/wiki.png/wiki/SignalScopePage WORKING for Me !!!
http://op25.osmocom.org/trac/wiki.png/wiki/SignalScopePage
SignalScopePage – OP25 http://op25.osmocom.org/trac/wiki.png/wiki/SignalScopePage Signal Scope Installation Before running the scope app, check that the following standard pre-requisite packages are also installed: GNU Radio The op25 blocks The o... View on op25.osmocom.org http://op25.osmocom.org/trac/wiki.png/wiki/SignalScopePage Preview by Yahoo
WireSharkPage – OP25 http://op25.osmocom.org/trac/wiki.png/wiki/WireSharkPage
http://op25.osmocom.org/trac/wiki.png/wiki/WireSharkPage
WireSharkPage – OP25 http://op25.osmocom.org/trac/wiki.png/wiki/WireSharkPage Extending Wireshark The WireShark packet sniffer normally doesn't support APCO P25. If you want to sniff P25 traffic using WireShark then you'll need to patch the s... View on op25.osmocom.org http://op25.osmocom.org/trac/wiki.png/wiki/WireSharkPage Preview by Yahoo
Does this help you at all? Let me know if you need more help. Happy New Year WOW - How's that B200 USRP working. I wanna step up from RTL2832U. My OP25 decode is killer, can't imagine how things would be with a B200... Thanks, Don Sacramento, Ca.
From the desk of, Don Adams
From: "Joseph Cardani jcardani@verizon.net mailto:jcardani@verizon.net [op25-dev]" <op25-dev@yahoogroups.com mailto:op25-dev@yahoogroups.com> To: op25-dev@yahoogroups.com mailto:op25-dev@yahoogroups.com Sent: Wednesday, December 31, 2014 8:28 AM Subject: Re: [op25-dev] Web site issues
Hi All,
Does anyone have scope.py and other pages from the OP25 website saved? Since the site is down I cannot access the command args, examples, and instructions.
I just purchased an B200 USRP and would like to get up and running. mtindor and Scott are assisting at Radio Reference also, but the OP25 stuff would be helpful.
thanks!
Hi Don,
Happy new year too!
So far I am still learning the ropes with the B200. It’s doing a good job on an LSM system that is around 20 miles away. Still working out some of the tweaks though. I wish it had filtering though - but I guess I can buy some bad pass filters.
Joe
On Jan 3, 2015, at 10:57 AM, Don Adams busterphenajo@yahoo.com [op25-dev] op25-dev@yahoogroups.com wrote:
WOW - How's that B200 USRP working. I wanna step up from RTL2832U. My OP25 decode is killer, can't imagine how things would be with a B200... Thanks, Don Sacramento, Ca.
From the desk of, Don Adams
From: "Joseph Cardani jcardani@verizon.net mailto:jcardani@verizon.net [op25-dev]" <op25-dev@yahoogroups.com mailto:op25-dev@yahoogroups.com> To: op25-dev@yahoogroups.com mailto:op25-dev@yahoogroups.com Sent: Wednesday, December 31, 2014 8:28 AM Subject: Re: [op25-dev] Web site issues
Hi all,
I have a neat idea.
Can OP25 be modified to “repeat" an entire spectrum say 851.0125 to 853.9875 with low power so a digital scanner in proximity to the repeater can receive the signal. Specifically can OP25 be able to receive CQPSK (LSM) and convert to C4FM in real time - since scanners have no issues with that modulation.
thanks!
Joe
On Jan 3, 2015, at 3:34 PM, Joseph Cardani jcardani@verizon.net [op25-dev] op25-dev@yahoogroups.com wrote:
Hi Don,
Happy new year too!
So far I am still learning the ropes with the B200. It’s doing a good job on an LSM system that is around 20 miles away. Still working out some of the tweaks though. I wish it had filtering though - but I guess I can buy some bad pass filters.
Joe
On Jan 3, 2015, at 10:57 AM, Don Adams busterphenajo@yahoo.com mailto:busterphenajo@yahoo.com [op25-dev] <op25-dev@yahoogroups.com mailto:op25-dev@yahoogroups.com> wrote:
WOW - How's that B200 USRP working. I wanna step up from RTL2832U. My OP25 decode is killer, can't imagine how things would be with a B200... Thanks, Don Sacramento, Ca.
From the desk of, Don Adams
From: "Joseph Cardani jcardani@verizon.net mailto:jcardani@verizon.net [op25-dev]" <op25-dev@yahoogroups.com mailto:op25-dev@yahoogroups.com> To: op25-dev@yahoogroups.com mailto:op25-dev@yahoogroups.com Sent: Wednesday, December 31, 2014 8:28 AM Subject: Re: [op25-dev] Web site issues
-
busterphenajo＠yahoo.com [op25-dev] -
Dominic H Weston dhweston＠hotmail.com [op25-dev]
-
Don Adams busterphenajo＠yahoo.com [op25-dev]
-
Joseph Cardani jcardani＠verizon.net [op25-dev]
-
logitec1830＠aol.com [op25-dev]