September 2023 - gerrit-log - lists.osmocom.org

[S] Change in osmo-ttcn3-hacks[master]: RTP_Emulation: Log number of error packets

by pespin

pespin has submitted this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/34551?usp=email ) Change subject: RTP_Emulation: Log number of error packets ...................................................................... RTP_Emulation: Log number of error packets Change-Id: I685fb43ea30c83a975edd32cc24994da15940100 --- M library/RTP_Emulation.ttcn 1 file changed, 14 insertions(+), 5 deletions(-) Approvals: neels: Looks good to me, approved osmith: Looks good to me, but someone else must approve Jenkins Builder: Verified diff --git a/library/RTP_Emulation.ttcn b/library/RTP_Emulation.ttcn index de2c877..5e10b3f 100644 --- a/library/RTP_Emulation.ttcn +++ b/library/RTP_Emulation.ttcn @@ -295,23 +295,23 @@ /* Check error counters */ if (s.num_pkts_rx_err_seq != 0) { - setverdict(fail, "RTP packet sequence number errors occurred"); + setverdict(fail, log2str(s.num_pkts_rx_err_seq, " RTP packet sequence number errors occurred")); mtc.stop; } if (s.num_pkts_rx_err_ts != 0) { - setverdict(fail, "RTP packet timestamp errors occurred"); + setverdict(fail, log2str(s.num_pkts_rx_err_ts, " RTP packet timestamp errors occurred")); mtc.stop; } if (s.num_pkts_rx_err_pt != 0) { - setverdict(fail, "RTP packet payload type errors occurred"); + setverdict(fail, log2str(s.num_pkts_rx_err_pt, " RTP packet payload type errors occurred")); mtc.stop; } if (s.num_pkts_rx_err_disabled != 0) { - setverdict(fail, "RTP packets received while RX was disabled"); + setverdict(fail, log2str(s.num_pkts_rx_err_disabled, " RTP packets received while RX was disabled")); mtc.stop; } if (s.num_pkts_rx_err_payload != 0) { - setverdict(fail, "RTP packets with mismatching payload received"); + setverdict(fail, log2str(s.num_pkts_rx_err_payload, " RTP packets with mismatching payload received")); mtc.stop; } } -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/34551?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I685fb43ea30c83a975edd32cc24994da15940100 Gerrit-Change-Number: 34551 Gerrit-PatchSet: 2 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: neels <nhofmeyr(a)sysmocom.de> Gerrit-Reviewer: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: merged

1 year, 8 months

1
0
0 0

[M] Change in osmo-ttcn3-hacks[master]: mgw: Introduce tests TC_two_crcx_mdcx_and_iuup_(rtp_)mdcx_recvonly

by pespin

pespin has submitted this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/34547?usp=email ) Change subject: mgw: Introduce tests TC_two_crcx_mdcx_and_iuup_(rtp_)mdcx_recvonly ...................................................................... mgw: Introduce tests TC_two_crcx_mdcx_and_iuup_(rtp_)mdcx_recvonly Change-Id: I34d47d0cdde855900798e4cb3efd26af22f5b049 --- M mgw/MGCP_Test.ttcn M mgw/expected-results.xml 2 files changed, 168 insertions(+), 0 deletions(-) Approvals: osmith: Looks good to me, but someone else must approve Jenkins Builder: Verified neels: Looks good to me, approved diff --git a/mgw/MGCP_Test.ttcn b/mgw/MGCP_Test.ttcn index ad564c1..b75fd69 100644 --- a/mgw/MGCP_Test.ttcn +++ b/mgw/MGCP_Test.ttcn @@ -10,6 +10,7 @@ */ module MGCP_Test { + import from Misc_Helpers all; import from Osmocom_Types all; import from MGCP_Types all; import from MGCP_Templates all; @@ -2955,6 +2956,80 @@ mp_local_ipv4, mp_remote_ipv4); } + /* Test that once IuUP->RTP has been set up, if the RTP/IuUP conn is set + * as "recvonly", no more RTP/IuUP packets get out of the MGW. */ + function f_tc_two_crcx_mdcx_and_iuup_mdcx_recvonly(charstring local_ip_a, charstring remote_ip_a, + IuUP_RabFlowCombinationList rfcl_a, + charstring local_ip_b, charstring remote_ip_b) runs on dummy_CT { + var RtpFlowData flow[2]; + var MgcpEndpoint ep := c_mgw_ep_rtpbridge & "2@" & c_mgw_domain; + var MgcpCallId call_id := '1227'H; + var RtpemStats stats[2]; + + f_init(ep); + + /* Create the first connection in receive only mode (RNC side, IuUP-Init active) */ + flow[0] := valueof(t_RtpFlow(local_ip_a, remote_ip_a, 96, "VND.3GPP.IUFP/16000")); + flow[0].em.portnr := 10000; + flow[0].rtp_cfg := c_RtpemDefaultCfg; + flow[0].rtp_cfg.rx_payloads[0].payload_type := flow[0].codec_descr[0].pt; + flow[0].rtp_cfg.tx_payloads[0].payload_type := flow[0].codec_descr[0].pt; + flow[0].rtp_cfg.iuup_mode := true; + flow[0].rtp_cfg.iuup_cfg.active_init := true; + flow[0].rtp_cfg.iuup_cfg.rab_flow_combs := rfcl_a; + + /* Create the second connection. This connection will be also + * in receive only mode (CN side, IuUP-Init passive) */ + flow[1] := valueof(t_RtpFlow(local_ip_b, remote_ip_b, 96, "VND.3GPP.IUFP/16000")); + flow[1].em.portnr := 20000; + flow[1].rtp_cfg := c_RtpemDefaultCfg; + flow[1].rtp_cfg.rx_payloads[0].payload_type := flow[1].codec_descr[0].pt; + flow[1].rtp_cfg.tx_payloads[0].payload_type := flow[1].codec_descr[0].pt; + flow[1].rtp_cfg.iuup_mode := true; + flow[1].rtp_cfg.iuup_cfg.active_init := false; + + f_two_crcx_mdcx_data_transfer(ep, call_id, flow[0], flow[1], false); + + /* Now validate we don't receive more RTP packets after setting it to recvonly: */ + f_rtpem_mode(RTPEM[1], RTPEM_MODE_RXONLY); + f_flow_modify(RTPEM[1], ep, call_id, "recvonly", flow[1]); + f_sleep(0.5); + stats[0] := f_rtpem_stats_get(RTPEM[1]); + f_sleep(0.5); + stats[1] := f_rtpem_stats_get(RTPEM[1]); + if (stats[1].num_pkts_rx > stats[0].num_pkts_rx) { + Misc_Helpers.f_shutdown(__BFILE__, __LINE__, fail, + log2str("received ", stats[1].num_pkts_rx - stats[0].num_pkts_rx, " RTP packets from MGW on recvonly connection 1")); + } + + /* Now do the same on the IuUP port: */ + f_rtpem_mode(RTPEM[0], RTPEM_MODE_RXONLY); + f_rtpem_mode(RTPEM[1], RTPEM_MODE_TXONLY); + f_flow_modify(RTPEM[0], ep, call_id, "recvonly", flow[0]); + f_sleep(0.5); + stats[0] := f_rtpem_stats_get(RTPEM[0]); + f_sleep(0.5); + stats[1] := f_rtpem_stats_get(RTPEM[0]); + if (stats[1].num_pkts_rx > stats[0].num_pkts_rx) { + Misc_Helpers.f_shutdown(__BFILE__, __LINE__, fail, + log2str("received ", stats[1].num_pkts_rx - stats[0].num_pkts_rx, " IuUP packets from MGW on recvonly connection 1")); + } + + /* Tear down */ + f_flow_delete(RTPEM[0]); + f_flow_delete(RTPEM[1], ep, call_id); + setverdict(pass); + } + testcase TC_two_crcx_mdcx_and_iuup_mdcx_recvonly() runs on dummy_CT { + var template (value) IuUP_RabFlowCombinationList rfcl := { + t_IuUP_RFC_AMR_12_2(0), + t_IuUP_RFC_AMR_SID(1), + t_IuUP_RFC_AMR_NO_DATA(2) + }; + f_tc_two_crcx_mdcx_and_iuup_mdcx_recvonly(mp_local_ipv4, mp_remote_ipv4, valueof(rfcl), + mp_local_ipv4, mp_remote_ipv4); + } + /* create two local emulations (1 RTP, 1 RTP+IuUP) and pass data in both directions */ function f_tc_two_crcx_mdcx_and_iuup_rtp(charstring local_ip_a, charstring remote_ip_a, IuUP_RabFlowCombinationList rfcl_a, @@ -3013,6 +3088,86 @@ mp_local_ipv4, mp_remote_ipv4); } + /* Test that once IuUP->RTP has been set up, if the RTP/IuUP conn is set + * as "recvonly", no more RTP/IuUP packets get out of the MGW. */ + function f_tc_two_crcx_mdcx_and_iuup_rtp_mdcx_recvonly(charstring local_ip_a, charstring remote_ip_a, + IuUP_RabFlowCombinationList rfcl_a, + charstring local_ip_b, charstring remote_ip_b) runs on dummy_CT { + var RtpFlowData flow[2]; + var MgcpEndpoint ep := c_mgw_ep_rtpbridge & "2@" & c_mgw_domain; + var MgcpCallId call_id := '1227'H; + var RtpemStats stats[2]; + + f_init(ep); + + /* Create the first connection in receive only mode (RNC side, IuUP-Init active) */ + flow[0] := valueof(t_RtpFlow(local_ip_a, remote_ip_a, 96, "VND.3GPP.IUFP/16000")); + flow[0].em.portnr := 10000; + flow[0].rtp_cfg := c_RtpemDefaultCfg; + flow[0].rtp_cfg.tx_payloads[0].payload_type := flow[0].codec_descr[0].pt; + flow[0].rtp_cfg.rx_payloads[0].payload_type := flow[0].codec_descr[0].pt; + flow[0].rtp_cfg.tx_payloads[0].fixed_payload := '4f28959ffeb80181f5c4e83d176c897b4a4e333298333419a493ca63ded6e0'O; + /* flow[1].rtp_cfg.rx_payloads[0].fixed_payload converted AMR-BE-RTP->AMR-IUUP*/ + flow[0].rtp_cfg.rx_payloads[0].fixed_payload := '08556d944c71a1a081e7ead204244480000ecd82b81118000097c4794e7740'O; + flow[0].rtp_cfg.iuup_mode := true; + flow[0].rtp_cfg.iuup_cfg.active_init := true; + flow[0].rtp_cfg.iuup_cfg.rab_flow_combs := rfcl_a; + + /* Create the second connection. This connection will be also + * in receive only mode (CN side, regular RTP) */ + flow[1] := valueof(t_RtpFlow(local_ip_b, remote_ip_b, 112, "AMR/8000")); + flow[1].em.portnr := 20000; + flow[1].rtp_cfg := c_RtpemDefaultCfg; + flow[1].rtp_cfg.tx_payloads[0].payload_type := flow[1].codec_descr[0].pt; + flow[1].rtp_cfg.rx_payloads[0].payload_type := flow[1].codec_descr[0].pt; + flow[1].rtp_cfg.tx_payloads[0].fixed_payload := '0382155b65131c68682079fab4810911200003b360ae0446000025f11e539dd0'O; + /* flow[0].rtp_cfg.rx_payloads[0].fixed_payload converted AMR-IuUP->AMR-BE-RTP*/ + flow[1].rtp_cfg.rx_payloads[0].fixed_payload := 'f3d3ca2567ffae00607d713a0f45db225ed2938ccca60ccd066924f298f7b5b8'O; + flow[1].rtp_cfg.iuup_mode := false; + + f_two_crcx_mdcx_data_transfer(ep, call_id, flow[0], flow[1], false); + + /* Now validate we don't receive more RTP packets after setting it to recvonly: */ + f_rtpem_mode(RTPEM[1], RTPEM_MODE_RXONLY); + f_flow_modify(RTPEM[1], ep, call_id, "recvonly", flow[1]); + f_sleep(0.5); + stats[0] := f_rtpem_stats_get(RTPEM[1]); + f_sleep(0.5); + stats[1] := f_rtpem_stats_get(RTPEM[1]); + if (stats[1].num_pkts_rx > stats[0].num_pkts_rx) { + Misc_Helpers.f_shutdown(__BFILE__, __LINE__, fail, + log2str("received ", stats[1].num_pkts_rx - stats[0].num_pkts_rx, " RTP packets from MGW on recvonly connection 1")); + } + + /* Now do the same on the IuUP port: */ + f_rtpem_mode(RTPEM[0], RTPEM_MODE_RXONLY); + f_flow_modify(RTPEM[0], ep, call_id, "recvonly", flow[0]); + f_rtpem_mode(RTPEM[1], RTPEM_MODE_TXONLY); + f_flow_modify(RTPEM[1], ep, call_id, "sendrecv", flow[1]); + f_sleep(0.5); + stats[0] := f_rtpem_stats_get(RTPEM[0]); + f_sleep(0.5); + stats[1] := f_rtpem_stats_get(RTPEM[0]); + if (stats[1].num_pkts_rx > stats[0].num_pkts_rx) { + Misc_Helpers.f_shutdown(__BFILE__, __LINE__, fail, + log2str("received ", stats[1].num_pkts_rx - stats[0].num_pkts_rx, " IuUP packets from MGW on recvonly connection 1")); + } + + /* Tear down */ + f_flow_delete(RTPEM[0]); + f_flow_delete(RTPEM[1], ep, call_id); + setverdict(pass); + } + testcase TC_two_crcx_mdcx_and_iuup_rtp_mdcx_recvonly() runs on dummy_CT { + var template (value) IuUP_RabFlowCombinationList rfcl := { + t_IuUP_RFC_AMR_12_2(0), + t_IuUP_RFC_AMR_SID(1), + t_IuUP_RFC_AMR_NO_DATA(2) + }; + f_tc_two_crcx_mdcx_and_iuup_rtp_mdcx_recvonly(mp_local_ipv4, mp_remote_ipv4, valueof(rfcl), + mp_local_ipv4, mp_remote_ipv4); + } + control { execute(TC_selftest()); execute(TC_auep_null()); @@ -3099,8 +3254,10 @@ execute(TC_two_crcx_mdcx_and_iuup()); execute(TC_two_crcx_mdcx_and_iuup_rfci_unordered()); + execute(TC_two_crcx_mdcx_and_iuup_mdcx_recvonly()); execute(TC_two_crcx_mdcx_and_iuup_rtp()); execute(TC_two_crcx_mdcx_and_iuup_rtp_rfci_unordered()); + execute(TC_two_crcx_mdcx_and_iuup_rtp_mdcx_recvonly()); execute(TC_two_crcx_mdcx_and_rtp_clearmode()); diff --git a/mgw/expected-results.xml b/mgw/expected-results.xml index a4ce388..44ce65b 100644 --- a/mgw/expected-results.xml +++ b/mgw/expected-results.xml @@ -89,8 +89,10 @@ <testcase classname='MGCP_Test' name='TC_two_crcx_mdcx_and_rtp_osmux_ipv4_ipv6' time='MASKED' /> <testcase classname='MGCP_Test' name='TC_two_crcx_mdcx_and_rtp_osmux_ipv6_ipv4' time='MASKED'/> <testcase classname='MGCP_Test' name='TC_two_crcx_mdcx_and_iuup' time='MASKED'/> + <testcase classname='MGCP_Test' name='TC_two_crcx_mdcx_and_iuup_mdcx_recvonly' time='MASKED'/> <testcase classname='MGCP_Test' name='TC_two_crcx_mdcx_and_iuup_rfci_unordered' time='MASKED'/> <testcase classname='MGCP_Test' name='TC_two_crcx_mdcx_and_iuup_rtp' time='MASKED'/> <testcase classname='MGCP_Test' name='TC_two_crcx_mdcx_and_iuup_rtp_rfci_unordered' time='MASKED'/> + <testcase classname='MGCP_Test' name='TC_two_crcx_mdcx_and_iuup_rtp_mdcx_recvonly' time='MASKED'/> <testcase classname='MGCP_Test' name='TC_one_crcx_loopback_rtp_implicit' time='MASKED'/> </testsuite> -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/34547?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I34d47d0cdde855900798e4cb3efd26af22f5b049 Gerrit-Change-Number: 34547 Gerrit-PatchSet: 4 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: neels <nhofmeyr(a)sysmocom.de> Gerrit-Reviewer: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: merged

1 year, 8 months

1
0
0 0

[M] Change in osmo-ttcn3-hacks[master]: mgw: Factor out helper func to test data flows over endp with 2 conns

by pespin

pespin has submitted this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/34546?usp=email ) Change subject: mgw: Factor out helper func to test data flows over endp with 2 conns ...................................................................... mgw: Factor out helper func to test data flows over endp with 2 conns The logic can be reused by AMR<->IuUP and IuUP<->IuUP tests. Change-Id: Ic4f3c5bb687373bdae6942e1952797e76bfa3ffb --- M mgw/MGCP_Test.ttcn 1 file changed, 58 insertions(+), 115 deletions(-) Approvals: neels: Looks good to me, approved Jenkins Builder: Verified osmith: Looks good to me, but someone else must approve diff --git a/mgw/MGCP_Test.ttcn b/mgw/MGCP_Test.ttcn index 0cedb0e..ad564c1 100644 --- a/mgw/MGCP_Test.ttcn +++ b/mgw/MGCP_Test.ttcn @@ -2804,42 +2804,21 @@ setverdict(pass); } - /* create two local RTP+IuUP emulations and pass data in both directions */ - function f_tc_two_crcx_mdcx_and_iuup(charstring local_ip_a, charstring remote_ip_a, - IuUP_RabFlowCombinationList rfcl_a, - charstring local_ip_b, charstring remote_ip_b) runs on dummy_CT { - var RtpFlowData flow[2]; + /* create two local emulations and pass data in both directions */ + function f_two_crcx_mdcx_data_transfer(MgcpEndpoint ep, MgcpCallId call_id, inout RtpFlowData flow_a, + inout RtpFlowData flow_b, boolean tear_down_rtp := true) runs on dummy_CT { var RtpemStats stats[2]; var MgcpResponse resp; - var MgcpEndpoint ep := c_mgw_ep_rtpbridge & "2@" & c_mgw_domain; - var MgcpCallId call_id := '1227'H; var integer num_pkts_tx[2]; var integer temp; - f_init(ep); - /* Create the first connection in receive only mode (RNC side, IuUP-Init active) */ - flow[0] := valueof(t_RtpFlow(local_ip_a, remote_ip_a, 96, "VND.3GPP.IUFP/16000")); - flow[0].em.portnr := 10000; - flow[0].rtp_cfg := c_RtpemDefaultCfg; - flow[0].rtp_cfg.rx_payloads[0].payload_type := flow[0].codec_descr[0].pt; - flow[0].rtp_cfg.tx_payloads[0].payload_type := flow[0].codec_descr[0].pt; - flow[0].rtp_cfg.iuup_mode := true; - flow[0].rtp_cfg.iuup_cfg.active_init := true; - flow[0].rtp_cfg.iuup_cfg.rab_flow_combs := rfcl_a; - f_flow_create(RTPEM[0], ep, call_id, "recvonly", flow[0], true); + f_flow_create(RTPEM[0], ep, call_id, "recvonly", flow_a, true); f_rtpem_mode(RTPEM[0], RTPEM_MODE_RXONLY); /* Create the second connection. This connection will be also - * in receive only mode (CN side, IuUP-Init passive) */ - flow[1] := valueof(t_RtpFlow(local_ip_b, remote_ip_b, 96, "VND.3GPP.IUFP/16000")); - flow[1].em.portnr := 20000; - flow[1].rtp_cfg := c_RtpemDefaultCfg; - flow[1].rtp_cfg.rx_payloads[0].payload_type := flow[1].codec_descr[0].pt; - flow[1].rtp_cfg.tx_payloads[0].payload_type := flow[1].codec_descr[0].pt; - flow[1].rtp_cfg.iuup_mode := true; - flow[1].rtp_cfg.iuup_cfg.active_init := false; - f_flow_create(RTPEM[1], ep, call_id, "recvonly", flow[1], true); + * in receive only mode (CN side, regular RTP) */ + f_flow_create(RTPEM[1], ep, call_id, "recvonly", flow_b, true); f_rtpem_mode(RTPEM[1], RTPEM_MODE_RXONLY); /* The first leg starts transmitting */ @@ -2875,7 +2854,7 @@ f_rtpem_mode(RTPEM[0], RTPEM_MODE_BIDIR); stats[1] := f_rtpem_stats_get(RTPEM[1]); num_pkts_tx[1] := stats[1].num_pkts_tx; - f_flow_modify(RTPEM[0], ep, call_id, "sendrecv", flow[0]); + f_flow_modify(RTPEM[0], ep, call_id, "sendrecv", flow_a); f_sleep(0.5); stats[0] := f_rtpem_stats_get(RTPEM[0]); if (stats[0].num_pkts_rx_err_disabled != 0) { @@ -2894,7 +2873,7 @@ f_rtpem_mode(RTPEM[1], RTPEM_MODE_BIDIR); stats[0] := f_rtpem_stats_get(RTPEM[0]); num_pkts_tx[0] := stats[0].num_pkts_tx; - f_flow_modify(RTPEM[1], ep, call_id, "sendrecv", flow[1]); + f_flow_modify(RTPEM[1], ep, call_id, "sendrecv", flow_b); f_sleep(2.0); stats[0] := f_rtpem_stats_get(RTPEM[0]); @@ -2916,8 +2895,44 @@ f_rtpem_stats_err_check(stats[1]); /* Tear down */ - f_flow_delete(RTPEM[0]); - f_flow_delete(RTPEM[1], ep, call_id); + if (tear_down_rtp) { + f_flow_delete(RTPEM[0]); + f_flow_delete(RTPEM[1], ep, call_id); + } + setverdict(pass); + } + + /* create two local RTP+IuUP emulations and pass data in both directions */ + function f_tc_two_crcx_mdcx_and_iuup(charstring local_ip_a, charstring remote_ip_a, + IuUP_RabFlowCombinationList rfcl_a, + charstring local_ip_b, charstring remote_ip_b) runs on dummy_CT { + var RtpFlowData flow[2]; + var MgcpEndpoint ep := c_mgw_ep_rtpbridge & "2@" & c_mgw_domain; + var MgcpCallId call_id := '1227'H; + + f_init(ep); + + /* Create the first connection in receive only mode (RNC side, IuUP-Init active) */ + flow[0] := valueof(t_RtpFlow(local_ip_a, remote_ip_a, 96, "VND.3GPP.IUFP/16000")); + flow[0].em.portnr := 10000; + flow[0].rtp_cfg := c_RtpemDefaultCfg; + flow[0].rtp_cfg.rx_payloads[0].payload_type := flow[0].codec_descr[0].pt; + flow[0].rtp_cfg.tx_payloads[0].payload_type := flow[0].codec_descr[0].pt; + flow[0].rtp_cfg.iuup_mode := true; + flow[0].rtp_cfg.iuup_cfg.active_init := true; + flow[0].rtp_cfg.iuup_cfg.rab_flow_combs := rfcl_a; + + /* Create the second connection. This connection will be also + * in receive only mode (CN side, IuUP-Init passive) */ + flow[1] := valueof(t_RtpFlow(local_ip_b, remote_ip_b, 96, "VND.3GPP.IUFP/16000")); + flow[1].em.portnr := 20000; + flow[1].rtp_cfg := c_RtpemDefaultCfg; + flow[1].rtp_cfg.rx_payloads[0].payload_type := flow[1].codec_descr[0].pt; + flow[1].rtp_cfg.tx_payloads[0].payload_type := flow[1].codec_descr[0].pt; + flow[1].rtp_cfg.iuup_mode := true; + flow[1].rtp_cfg.iuup_cfg.active_init := false; + + f_two_crcx_mdcx_data_transfer(ep, call_id, flow[0], flow[1], true); setverdict(pass); } testcase TC_two_crcx_mdcx_and_iuup() runs on dummy_CT { @@ -2945,12 +2960,8 @@ IuUP_RabFlowCombinationList rfcl_a, charstring local_ip_b, charstring remote_ip_b) runs on dummy_CT { var RtpFlowData flow[2]; - var RtpemStats stats[2]; - var MgcpResponse resp; var MgcpEndpoint ep := c_mgw_ep_rtpbridge & "2@" & c_mgw_domain; var MgcpCallId call_id := '1227'H; - var integer num_pkts_tx[2]; - var integer temp; f_init(ep); @@ -2966,8 +2977,6 @@ flow[0].rtp_cfg.iuup_mode := true; flow[0].rtp_cfg.iuup_cfg.active_init := true; flow[0].rtp_cfg.iuup_cfg.rab_flow_combs := rfcl_a; - f_flow_create(RTPEM[0], ep, call_id, "recvonly", flow[0], true); - f_rtpem_mode(RTPEM[0], RTPEM_MODE_RXONLY); /* Create the second connection. This connection will be also * in receive only mode (CN side, regular RTP) */ @@ -2980,85 +2989,8 @@ /* flow[0].rtp_cfg.rx_payloads[0].fixed_payload converted AMR-IuUP->AMR-BE-RTP*/ flow[1].rtp_cfg.rx_payloads[0].fixed_payload := 'f3d3ca2567ffae00607d713a0f45db225ed2938ccca60ccd066924f298f7b5b8'O; flow[1].rtp_cfg.iuup_mode := false; - f_flow_create(RTPEM[1], ep, call_id, "recvonly", flow[1], true); - f_rtpem_mode(RTPEM[1], RTPEM_MODE_RXONLY); - /* The first leg starts transmitting */ - f_rtpem_mode(RTPEM[0], RTPEM_MODE_TXONLY); - f_sleep(0.5); - stats[0] := f_rtpem_stats_get(RTPEM[0]); - if (stats[0].num_pkts_rx_err_disabled != 0) { - setverdict(fail, "received packets from MGW on recvonly connection 0"); - mtc.stop; - } - stats[1] := f_rtpem_stats_get(RTPEM[1]); - if (stats[1].num_pkts_rx_err_disabled != 0) { - setverdict(fail, "received packets from MGW on recvonly connection 1"); - mtc.stop; - } - - /* The second leg starts transmitting a little later */ - f_rtpem_mode(RTPEM[1], RTPEM_MODE_TXONLY); - f_sleep(1.0); - stats[0] := f_rtpem_stats_get(RTPEM[0]); - if (stats[0].num_pkts_rx_err_disabled != 0) { - setverdict(fail, "received packets from MGW on recvonly connection 0"); - mtc.stop; - } - stats[1] := f_rtpem_stats_get(RTPEM[1]); - if (stats[1].num_pkts_rx_err_disabled != 0) { - setverdict(fail, "received packets from MGW on recvonly connection 1"); - mtc.stop; - } - - /* The first leg will now be switched into bidirectional - * mode, but we do not expect any data coming back yet. */ - f_rtpem_mode(RTPEM[0], RTPEM_MODE_BIDIR); - stats[1] := f_rtpem_stats_get(RTPEM[1]); - num_pkts_tx[1] := stats[1].num_pkts_tx; - f_flow_modify(RTPEM[0], ep, call_id, "sendrecv", flow[0]); - f_sleep(0.5); - stats[0] := f_rtpem_stats_get(RTPEM[0]); - if (stats[0].num_pkts_rx_err_disabled != 0) { - setverdict(fail, "received packets from MGW on recvonly connection 0"); - mtc.stop; - } - stats[1] := f_rtpem_stats_get(RTPEM[1]); - if (stats[1].num_pkts_rx_err_disabled != 0) { - setverdict(fail, "received packets from MGW on recvonly connection 1"); - mtc.stop; - } - - /* When the second leg is switched into bidirectional mode - * as well, then the MGW will connect the two together and - * we should see RTP streams passing through from both ends. */ - f_rtpem_mode(RTPEM[1], RTPEM_MODE_BIDIR); - stats[0] := f_rtpem_stats_get(RTPEM[0]); - num_pkts_tx[0] := stats[0].num_pkts_tx; - f_flow_modify(RTPEM[1], ep, call_id, "sendrecv", flow[1]); - f_sleep(2.0); - - stats[0] := f_rtpem_stats_get(RTPEM[0]); - stats[1] := f_rtpem_stats_get(RTPEM[1]); - - temp := stats[0].num_pkts_tx - num_pkts_tx[0] - stats[1].num_pkts_rx; - if (temp > 3 or temp < -3) { - setverdict(fail, "number of packets not within normal parameters:", temp); - mtc.stop; - } - - temp := stats[1].num_pkts_tx - num_pkts_tx[1] - stats[0].num_pkts_rx; - if (temp > 3 or temp < -3) { - setverdict(fail, "number of packets not within normal parameters:", temp); - mtc.stop; - } - - f_rtpem_stats_err_check(stats[0]); - f_rtpem_stats_err_check(stats[1]); - - /* Tear down */ - f_flow_delete(RTPEM[0]); - f_flow_delete(RTPEM[1], ep, call_id); + f_two_crcx_mdcx_data_transfer(ep, call_id, flow[0], flow[1], true); setverdict(pass); } testcase TC_two_crcx_mdcx_and_iuup_rtp() runs on dummy_CT { -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/34546?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: Ic4f3c5bb687373bdae6942e1952797e76bfa3ffb Gerrit-Change-Number: 34546 Gerrit-PatchSet: 3 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: neels <nhofmeyr(a)sysmocom.de> Gerrit-Reviewer: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: merged

1 year, 8 months

1
0
0 0

[S] Change in osmo-ttcn3-hacks[master]: RTP_Emulation: Log the different failure verdicts before stopping

by pespin

pespin has submitted this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/34552?usp=email ) Change subject: RTP_Emulation: Log the different failure verdicts before stopping ...................................................................... RTP_Emulation: Log the different failure verdicts before stopping Change-Id: I177b2f4e56ac89fcab20ba6235bf968ac1873046 --- M library/RTP_Emulation.ttcn 1 file changed, 26 insertions(+), 6 deletions(-) Approvals: neels: Looks good to me, approved osmith: Looks good to me, but someone else must approve Jenkins Builder: Verified diff --git a/library/RTP_Emulation.ttcn b/library/RTP_Emulation.ttcn index 5e10b3f..9095214 100644 --- a/library/RTP_Emulation.ttcn +++ b/library/RTP_Emulation.ttcn @@ -280,38 +280,49 @@ * check that will fit most situations and is intended to be executed by * the testcases as as needed. */ function f_rtpem_stats_err_check(RtpemStats s) { + var boolean do_stop := false; log("stats: ", s); /* Check if there was some activity at either on the RX or on the * TX side, but complete silence would indicate some problem */ if (s.num_pkts_tx < 1 and s.num_pkts_rx < 1) { setverdict(fail, "no RTP packet activity detected (packets)"); - mtc.stop; + do_stop := true; } if (s.bytes_payload_tx < 1 and s.bytes_payload_rx < 1) { setverdict(fail, "no RTP packet activity detected (bytes)"); - mtc.stop; + do_stop := true; } /* Check error counters */ if (s.num_pkts_rx_err_seq != 0) { setverdict(fail, log2str(s.num_pkts_rx_err_seq, " RTP packet sequence number errors occurred")); - mtc.stop; + do_stop := true; } if (s.num_pkts_rx_err_ts != 0) { setverdict(fail, log2str(s.num_pkts_rx_err_ts, " RTP packet timestamp errors occurred")); - mtc.stop; + do_stop := true; } if (s.num_pkts_rx_err_pt != 0) { setverdict(fail, log2str(s.num_pkts_rx_err_pt, " RTP packet payload type errors occurred")); - mtc.stop; + do_stop := true; } if (s.num_pkts_rx_err_disabled != 0) { setverdict(fail, log2str(s.num_pkts_rx_err_disabled, " RTP packets received while RX was disabled")); - mtc.stop; + do_stop := true; } if (s.num_pkts_rx_err_payload != 0) { setverdict(fail, log2str(s.num_pkts_rx_err_payload, " RTP packets with mismatching payload received")); + do_stop := true; + } + + if (do_stop) { + if (self == mtc) { + /* Properly stop all ports before disconnecting them. This avoids + * running into the dynamic testcase error due to messages arriving on + * unconnected ports. */ + all component.stop; + } mtc.stop; } } -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/34552?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I177b2f4e56ac89fcab20ba6235bf968ac1873046 Gerrit-Change-Number: 34552 Gerrit-PatchSet: 2 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: neels <nhofmeyr(a)sysmocom.de> Gerrit-Reviewer: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: merged

1 year, 8 months

1
0
0 0

[M] Change in osmo-ttcn3-hacks[master]: mgw: Introduce test TC_two_crcx_mdcx_and_iuup_rtp_mdcx_to_iuup

by pespin

pespin has submitted this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/34539?usp=email ) Change subject: mgw: Introduce test TC_two_crcx_mdcx_and_iuup_rtp_mdcx_to_iuup ...................................................................... mgw: Introduce test TC_two_crcx_mdcx_and_iuup_rtp_mdcx_to_iuup Related: SYS#6578 Change-Id: I08eca9ea123029c37892d5de7c94a8ed6cc0a913 --- M mgw/MGCP_Test.ttcn M mgw/expected-results.xml 2 files changed, 113 insertions(+), 0 deletions(-) Approvals: Jenkins Builder: Verified neels: Looks good to me, approved osmith: Looks good to me, but someone else must approve diff --git a/mgw/MGCP_Test.ttcn b/mgw/MGCP_Test.ttcn index b75fd69..7568ac9 100644 --- a/mgw/MGCP_Test.ttcn +++ b/mgw/MGCP_Test.ttcn @@ -3168,6 +3168,107 @@ mp_local_ipv4, mp_remote_ipv4); } + /* Set up Endpoint with 1 IuUP conn and 1 RTP-AMR conn, then MDCX the later to become IuUP. */ + function f_tc_two_crcx_mdcx_and_iuup_rtp_mdcx_to_iuup(charstring local_ip_a, charstring remote_ip_a, + IuUP_RabFlowCombinationList rfcl_a, + charstring local_ip_b, charstring remote_ip_b) runs on dummy_CT { + var RtpFlowData flow[2]; + var MgcpEndpoint ep := c_mgw_ep_rtpbridge & "2@" & c_mgw_domain; + var MgcpCallId call_id := '1227'H; + var RtpemStats stats[2][2]; + + f_init(ep); + + /* Create the first connection in receive only mode (RNC side, IuUP-Init active) */ + flow[0] := valueof(t_RtpFlow(local_ip_a, remote_ip_a, 96, "VND.3GPP.IUFP/16000")); + flow[0].em.portnr := 10000; + flow[0].rtp_cfg := c_RtpemDefaultCfg; + flow[0].rtp_cfg.tx_payloads[0].payload_type := flow[0].codec_descr[0].pt; + flow[0].rtp_cfg.rx_payloads[0].payload_type := flow[0].codec_descr[0].pt; + flow[0].rtp_cfg.tx_payloads[0].fixed_payload := '4f28959ffeb80181f5c4e83d176c897b4a4e333298333419a493ca63ded6e0'O; + /* flow[1].rtp_cfg.rx_payloads[0].fixed_payload converted AMR-BE-RTP->AMR-IUUP*/ + flow[0].rtp_cfg.rx_payloads[0].fixed_payload := '08556d944c71a1a081e7ead204244480000ecd82b81118000097c4794e7740'O; + flow[0].rtp_cfg.iuup_mode := true; + flow[0].rtp_cfg.iuup_cfg.active_init := true; + flow[0].rtp_cfg.iuup_cfg.rab_flow_combs := rfcl_a; + + /* Create the second connection. This connection will be also + * in receive only mode (CN side, regular RTP) */ + flow[1] := valueof(t_RtpFlow(local_ip_b, remote_ip_b, 112, "AMR/8000")); + flow[1].em.portnr := 20000; + flow[1].rtp_cfg := c_RtpemDefaultCfg; + flow[1].rtp_cfg.tx_payloads[0].payload_type := flow[1].codec_descr[0].pt; + flow[1].rtp_cfg.rx_payloads[0].payload_type := flow[1].codec_descr[0].pt; + flow[1].rtp_cfg.tx_payloads[0].fixed_payload := '0382155b65131c68682079fab4810911200003b360ae0446000025f11e539dd0'O; + /* flow[0].rtp_cfg.rx_payloads[0].fixed_payload converted AMR-IuUP->AMR-BE-RTP*/ + flow[1].rtp_cfg.rx_payloads[0].fixed_payload := 'f3d3ca2567ffae00607d713a0f45db225ed2938ccca60ccd066924f298f7b5b8'O; + flow[1].rtp_cfg.iuup_mode := false; + + f_two_crcx_mdcx_data_transfer(ep, call_id, flow[0], flow[1], false); + setverdict(pass); + + /* Stop sending further pkts to RTPEM[1], to avoid race conditions where RTP is sent while we + * reconfigure MGW (and our RTPEM) for IuUP: + */ + f_rtpem_mode(RTPEM[0], RTPEM_MODE_RXONLY); + f_rtpem_mode(RTPEM[1], RTPEM_MODE_RXONLY); + f_sleep(0.5); + + /* Modify the AMR side to also do IuUP */ + flow[1].codec_descr := {{ + pt := 96, + codec := "VND.3GPP.IUFP/16000", + fmtp := omit + }}; + flow[1].rtp_cfg.iuup_mode := true; + flow[1].rtp_cfg.iuup_cfg.active_init := false; + flow[1].rtp_cfg.iuup_cfg.rab_flow_combs := rfcl_a; + flow[1].rtp_cfg.tx_payloads[0].payload_type := flow[1].codec_descr[0].pt; + /* Send whatever payload is expected by the other RTPEM, now without AMR-BE_RTP<->AMR-IUUP conversion: */ + flow[1].rtp_cfg.tx_payloads[0].fixed_payload := flow[0].rtp_cfg.rx_payloads[0].fixed_payload; + flow[1].rtp_cfg.rx_payloads[0].payload_type := flow[1].codec_descr[0].pt; + /* Expect whatever payload is sent by the other RTPEM, now without AMR-BE_RTP<->AMR-IUUP conversion: */ + flow[1].rtp_cfg.rx_payloads[0].fixed_payload := flow[0].rtp_cfg.tx_payloads[0].fixed_payload; + f_flow_modify(RTPEM[1], ep, call_id, "sendrecv", flow[1]); + f_rtpem_mode(RTPEM[0], RTPEM_MODE_BIDIR); + f_sleep(1.0); + f_rtpem_mode(RTPEM[1], RTPEM_MODE_BIDIR); + + /* Now, if MGW would keep sending RTP instead of expected IuUP, then that would make the RTPEM[1] + * component to fail, since it would error trying to decode an RTP pkt as IuUP. + * We simply need to make sure some packets are being forwarded to it: + */ + stats[0][0] := f_rtpem_stats_get(RTPEM[0]); + stats[1][0] := f_rtpem_stats_get(RTPEM[1]); + f_sleep(1.0); + stats[0][1] := f_rtpem_stats_get(RTPEM[0]); + stats[1][1] := f_rtpem_stats_get(RTPEM[1]); + + f_rtpem_stats_err_check(stats[0][1]); + f_rtpem_stats_err_check(stats[1][1]); + if (stats[0][1].num_pkts_rx == stats[0][0].num_pkts_rx) { + Misc_Helpers.f_shutdown(__BFILE__, __LINE__, fail, + log2str("No packets received in connection 0 after MDCX")); + } + if (stats[1][1].num_pkts_rx == stats[1][0].num_pkts_rx) { + Misc_Helpers.f_shutdown(__BFILE__, __LINE__, fail, + log2str("No packets received in connection 1 after MDCX")); + } + + /* Tear down */ + f_flow_delete(RTPEM[0]); + f_flow_delete(RTPEM[1], ep, call_id); + setverdict(pass); + } + testcase TC_two_crcx_mdcx_and_iuup_rtp_mdcx_to_iuup() runs on dummy_CT { + var template (value) IuUP_RabFlowCombinationList rfcl := { + t_IuUP_RFC_AMR_12_2(0), + t_IuUP_RFC_AMR_SID(1), + t_IuUP_RFC_AMR_NO_DATA(2) + }; + f_tc_two_crcx_mdcx_and_iuup_rtp_mdcx_to_iuup(mp_local_ipv4, mp_remote_ipv4, valueof(rfcl), + mp_local_ipv4, mp_remote_ipv4); + } control { execute(TC_selftest()); execute(TC_auep_null()); @@ -3258,6 +3359,7 @@ execute(TC_two_crcx_mdcx_and_iuup_rtp()); execute(TC_two_crcx_mdcx_and_iuup_rtp_rfci_unordered()); execute(TC_two_crcx_mdcx_and_iuup_rtp_mdcx_recvonly()); + execute(TC_two_crcx_mdcx_and_iuup_rtp_mdcx_to_iuup()); execute(TC_two_crcx_mdcx_and_rtp_clearmode()); diff --git a/mgw/expected-results.xml b/mgw/expected-results.xml index 44ce65b..5d57e1c 100644 --- a/mgw/expected-results.xml +++ b/mgw/expected-results.xml @@ -94,5 +94,6 @@ <testcase classname='MGCP_Test' name='TC_two_crcx_mdcx_and_iuup_rtp' time='MASKED'/> <testcase classname='MGCP_Test' name='TC_two_crcx_mdcx_and_iuup_rtp_rfci_unordered' time='MASKED'/> <testcase classname='MGCP_Test' name='TC_two_crcx_mdcx_and_iuup_rtp_mdcx_recvonly' time='MASKED'/> + <testcase classname='MGCP_Test' name='TC_two_crcx_mdcx_and_iuup_rtp_mdcx_to_iuup' time='MASKED'/> <testcase classname='MGCP_Test' name='TC_one_crcx_loopback_rtp_implicit' time='MASKED'/> </testsuite> -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/34539?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I08eca9ea123029c37892d5de7c94a8ed6cc0a913 Gerrit-Change-Number: 34539 Gerrit-PatchSet: 5 Gerrit-Owner: neels <nhofmeyr(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: neels <nhofmeyr(a)sysmocom.de> Gerrit-Reviewer: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: merged

1 year, 8 months

1
0
0 0

[M] Change in osmo-bsc[master]: vty: make NCC Permitted (SI2) configurable

by osmith

Attention is currently required from: fixeria, pespin. Hello Jenkins Builder, pespin, I'd like you to reexamine a change. Please visit https://gerrit.osmocom.org/c/osmo-bsc/+/34543?usp=email to look at the new patch set (#2). The following approvals got outdated and were removed: Verified+1 by Jenkins Builder Change subject: vty: make NCC Permitted (SI2) configurable ...................................................................... vty: make NCC Permitted (SI2) configurable Related: SYS#6579 Change-Id: I71bb855c35378f8f0598bc11a42bd274b7232a5e --- M src/osmo-bsc/bts_vty.c M tests/bts_features.vty 2 files changed, 119 insertions(+), 0 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-bsc refs/changes/43/34543/2 -- To view, visit https://gerrit.osmocom.org/c/osmo-bsc/+/34543?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-bsc Gerrit-Branch: master Gerrit-Change-Id: I71bb855c35378f8f0598bc11a42bd274b7232a5e Gerrit-Change-Number: 34543 Gerrit-PatchSet: 2 Gerrit-Owner: osmith <osmith(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-CC: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Attention: pespin <pespin(a)sysmocom.de> Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-MessageType: newpatchset

1 year, 8 months

1
0
0 0

[M] Change in osmo-ttcn3-hacks[master]: mgw: Introduce test TC_two_crcx_mdcx_and_iuup_rtp_mdcx_to_iuup

by neels

Attention is currently required from: neels, pespin. neels has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/34539?usp=email ) Change subject: mgw: Introduce test TC_two_crcx_mdcx_and_iuup_rtp_mdcx_to_iuup ...................................................................... Patch Set 4: Code-Review+2 -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/34539?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I08eca9ea123029c37892d5de7c94a8ed6cc0a913 Gerrit-Change-Number: 34539 Gerrit-PatchSet: 4 Gerrit-Owner: neels <nhofmeyr(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: neels <nhofmeyr(a)sysmocom.de> Gerrit-Reviewer: osmith <osmith(a)sysmocom.de> Gerrit-CC: pespin <pespin(a)sysmocom.de> Gerrit-Attention: pespin <pespin(a)sysmocom.de> Gerrit-Attention: neels <nhofmeyr(a)sysmocom.de> Gerrit-Comment-Date: Thu, 28 Sep 2023 14:30:33 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

1 year, 8 months

1
0
0 0

[M] Change in osmo-ttcn3-hacks[master]: mgw: Factor out helper func to test data flows over endp with 2 conns

by neels

Attention is currently required from: fixeria, pespin. neels has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/34546?usp=email ) Change subject: mgw: Factor out helper func to test data flows over endp with 2 conns ...................................................................... Patch Set 2: Code-Review+2 -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/34546?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: Ic4f3c5bb687373bdae6942e1952797e76bfa3ffb Gerrit-Change-Number: 34546 Gerrit-PatchSet: 2 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: neels <nhofmeyr(a)sysmocom.de> Gerrit-Reviewer: osmith <osmith(a)sysmocom.de> Gerrit-Attention: pespin <pespin(a)sysmocom.de> Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Comment-Date: Thu, 28 Sep 2023 14:29:54 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

1 year, 8 months

1
0
0 0

[M] Change in osmo-ttcn3-hacks[master]: mgw: Introduce tests TC_two_crcx_mdcx_and_iuup_(rtp_)mdcx_recvonly

by neels

Attention is currently required from: pespin. neels has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/34547?usp=email ) Change subject: mgw: Introduce tests TC_two_crcx_mdcx_and_iuup_(rtp_)mdcx_recvonly ...................................................................... Patch Set 3: Code-Review+2 -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/34547?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I34d47d0cdde855900798e4cb3efd26af22f5b049 Gerrit-Change-Number: 34547 Gerrit-PatchSet: 3 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: neels <nhofmeyr(a)sysmocom.de> Gerrit-Reviewer: osmith <osmith(a)sysmocom.de> Gerrit-Attention: pespin <pespin(a)sysmocom.de> Gerrit-Comment-Date: Thu, 28 Sep 2023 14:28:07 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

1 year, 8 months

1
0
0 0

[S] Change in osmo-ttcn3-hacks[master]: RTP_Emulation: Log number of error packets

by neels

Attention is currently required from: pespin. neels has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/34551?usp=email ) Change subject: RTP_Emulation: Log number of error packets ...................................................................... Patch Set 1: Code-Review+2 -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/34551?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: I685fb43ea30c83a975edd32cc24994da15940100 Gerrit-Change-Number: 34551 Gerrit-PatchSet: 1 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: neels <nhofmeyr(a)sysmocom.de> Gerrit-Reviewer: osmith <osmith(a)sysmocom.de> Gerrit-Attention: pespin <pespin(a)sysmocom.de> Gerrit-Comment-Date: Thu, 28 Sep 2023 14:26:20 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

1 year, 8 months

1
0
0 0

2025

2024

2023

2022

gerrit-log September 2023