8 Jul
2023
8 Jul
'23
11:12 a.m.
Hello everyone!
I'm new to simtrace and I'm trying to set up a test with a Simtrace2
board connected to a RPI (which I'll call the client from now on) and
a different RPI with an attached card reader (which I'll call the
server).
The server runs osmo-remsim-bankd and osmo-remsim-server (installed
from your debian repo). The bankd server has its configuration csv
file filled with the correct reader information. The
osmo-remsim-server runs on the same machine and has a mapping
configured via the python api tool to map client 1 to bank 1, like so:
root@rpi-cardem-1:~# python3 /etc/osmocom/osmo-remsim-apitool -a
/clients: {'clients': []}
/banks: {'banks': [{'peer': 'B1', 'state':
'CONNECTED_BANKD',
'component_id': {'type_': 'remsimBankd', 'name':
'fixme-name',
'software': 'remsim-bankd', 'swVersion': '1.0.0'},
'bankId': 1,
'numberOfSlots': 5}]}
/slotmaps: {'slotmaps': [{'bank': {'bankId': 1, 'slotNr':
1},
'client': {'clientId': 1, 'slotNr': 1}, 'state':
'ACTIVE'}]}
The client runs osmo-remsim-client-st2 like this:
root@rpi-cardem-2:~# osmo-remsim-client-st2 --server-ip remsim-server
--server-port 9998 --client-id 1 --client-slot 1 --usb-vendor 1d50
--usb-product 60e3 --usb-config 1 --usb-interface 0 --usb-path "1-1.4"
However, based on the logs, it tries to contact the bankd server at
127.0.0.1:9999 instead of remsim-server:9999:
DRSPRO INFO ../rspro_client_fsm.c:307
RSPRO_CLIENT(server){REESTABLISH}: Creating TCP connection to server
at remsim-server:9998
DLINP NOTICE simtrace2_api.c:271 [0] <=
osmo_st2_cardem_request_config(features=00000001)
DLINP NOTICE input/ipa.c:141 remsim-server:9998 connection done
DRSPRO NOTICE ../rspro_client_fsm.c:127
RSPRO_CLIENT(server){REESTABLISH}: RSPRO link to remsim-server:9998 UP
DRSPRO INFO ../rspro_client_fsm.c:307
RSPRO_CLIENT(bankd){REESTABLISH}: Creating TCP connection to server at
127.0.0.1:9999
DRSPRO NOTICE ../rspro_client_fsm.c:127
RSPRO_CLIENT(bankd){REESTABLISH}: RSPRO link to 127.0.0.1:9999 DOWN
The bankd server listens on 0.0.0.0 on the server side:
root@rpi-cardem-1:~# netstat -tpan | grep osmo | grep LISTEN
tcp 0 0 0.0.0.0:9997 0.0.0.0:*
LISTEN 409/osmo-remsim-ser
tcp 0 0 0.0.0.0:9998 0.0.0.0:*
LISTEN 409/osmo-remsim-ser
tcp 0 0 0.0.0.0:9999 0.0.0.0:*
LISTEN 405/osmo-remsim-ban
My question is - how is osmo-remsim-client-st2 getting the IP address
of the bankd server? What did I do wrong?
I've tried a few tricks to redirect traffic from 127.0.0.1:9999 to
remsim-server:9999, but so far have failed. This is what I've tried as
a proxy, but the connection seems to get garbled because netcat
expects LF terminated strings:
nc -l 127.0.0.1 9999 | nc remsim-server 9999
Thanks for the help
Cheers,
Adrian
8 Jul
8 Jul
11:31 a.m.
Update - I've created a better tunnel via ssh port forwarding (why did
I ever bother with netcat?), to bypass the connection problem:
root@rpi-cardem-2:~# ssh -L 9999:remsim-server:9999 pi@remsim-server
Starting the client now shows other repeating messages I need to figure out:
root@rpi-cardem-2:~# osmo-remsim-client-st2 --server-ip remsim-server
--server-port 9998 --client-id 1 --client-slot 1 --usb-vendor 1d50
--usb-product 60e3 --usb-config 1 --usb-interface 0 --usb-path "1-1.4"
DRSPRO INFO ../rspro_client_fsm.c:307
RSPRO_CLIENT(server){REESTABLISH}: Creating TCP connection to server
at remsim-server:9998
DLINP NOTICE simtrace2_api.c:271 [0] <=
osmo_st2_cardem_request_config(features=00000001)
DLINP NOTICE input/ipa.c:141 remsim-server:9998 connection done
DRSPRO NOTICE ../rspro_client_fsm.c:127
RSPRO_CLIENT(server){REESTABLISH}: RSPRO link to remsim-server:9998 UP
DRSPRO INFO ../rspro_client_fsm.c:307
RSPRO_CLIENT(bankd){REESTABLISH}: Creating TCP connection to server at
127.0.0.1:9999
DLINP NOTICE input/ipa.c:141 127.0.0.1:9999 connection done
DRSPRO NOTICE ../rspro_client_fsm.c:127
RSPRO_CLIENT(bankd){REESTABLISH}: RSPRO link to 127.0.0.1:9999 UP
DRSPRO ERROR ../rspro_client_fsm.c:297
RSPRO_CLIENT(bankd){REESTABLISH}: Event SRVC_E_KA_TERMINATED not
permitted
DRSPRO INFO ../rspro_client_fsm.c:302
RSPRO_CLIENT(bankd){REESTABLISH}: Destroying existing connection to
server
DRSPRO INFO ../rspro_client_fsm.c:307
RSPRO_CLIENT(bankd){REESTABLISH}: Creating TCP connection to server at
127.0.0.1:9999
DLINP NOTICE input/ipa.c:141 127.0.0.1:9999 connection done
DRSPRO NOTICE ../rspro_client_fsm.c:127
RSPRO_CLIENT(bankd){REESTABLISH}: RSPRO link to 127.0.0.1:9999 UP
DRSPRO ERROR ../rspro_client_fsm.c:297
RSPRO_CLIENT(bankd){REESTABLISH}: Event SRVC_E_KA_TERMINATED not
permitted
The bankd daemon says:
Jul 08 10:27:00 rpi-cardem-1 osmo-remsim-bankd[405]: 526 DBANKDW INFO
bankd_main.c:442 [003 CONN_CLIENT_MAPPED] Changing state to ACCEPTING
Jul 08 10:27:00 rpi-cardem-1 osmo-remsim-bankd[405]: 522 DBANKDW INFO
bankd_main.c:955 [000 ACCEPTING] Accepted connection from
127.0.0.1:57908
Jul 08 10:27:00 rpi-cardem-1 osmo-remsim-bankd[405]: 522 DBANKDW INFO
bankd_main.c:442 [000 ACCEPTING] Changing state to CONN_WAIT_ID
Jul 08 10:27:00 rpi-cardem-1 osmo-remsim-bankd[405]: 522 DBANKDW INFO
bankd_main.c:655 [000 CONN_WAIT_ID] Rx RSPRO connectClientReq(T=0,
N='rpi-cardem-2', SW='remsim-client', VER='1.0.0')
Jul 08 10:27:00 rpi-cardem-1 osmo-remsim-bankd[405]: 522 DBANKDW INFO
bankd_main.c:442 [000 CONN_WAIT_ID] Changing state to CONN_CLIENT
Jul 08 10:27:00 rpi-cardem-1 osmo-remsim-bankd[405]: 522 DBANKDW INFO
bankd_main.c:625 [000 CONN_CLIENT] slotmap found: C(1:1) -> B(1:1)
Jul 08 10:27:00 rpi-cardem-1 osmo-remsim-bankd[405]: 522 DBANKDW INFO
bankd_main.c:450 [000 CONN_CLIENT] Changing state to
CONN_CLIENT_MAPPED (timeout=10)
Jul 08 10:27:00 rpi-cardem-1 osmo-remsim-bankd[405]: 522 DBANKDW INFO
bankd_pcsc.c:261 [000 CONN_CLIENT_MAPPED] Attempting to open PC/SC
context
Jul 08 10:27:00 rpi-cardem-1 osmo-remsim-bankd[405]: 522 DBANKDW INFO
bankd_pcsc.c:264 [000 CONN_CLIENT_MAPPED] SCardEstablishContext: OK
Jul 08 10:27:00 rpi-cardem-1 osmo-remsim-bankd[405]: 522 DBANKDW INFO
bankd_pcsc.c:215 [000 CONN_CLIENT_MAPPED] Attempting to find card/slot
using regex 'SCM Microsystems Inc. SCR 3310 [CCID Interface]
(53312144266274) 00 00'
Jul 08 10:27:00 rpi-cardem-1 osmo-remsim-bankd[405]: 522 DBANKDW INFO
bankd_main.c:967 [000 CONN_CLIENT_MAPPED] Error -2 occurred: Cleaning
up state
Jul 08 10:27:00 rpi-cardem-1 osmo-remsim-bankd[405]: 522 DBANKDW INFO
bankd_main.c:442 [000 CONN_CLIENT_MAPPED] Changing state to ACCEPTING
Does this mean that it doesn't find the reader? Though the name is the
one reported by pcsc_scan:
root@rpi-cardem-1:~# pcsc_scan | head
Using reader plug'n play mechanism
Scanning present readers...
0: SCM Microsystems Inc. SCR 3310 [CCID Interface] (53312144266274) 00 00
Sat Jul 8 10:30:44 2023
Reader 0: SCM Microsystems Inc. SCR 3310 [CCID Interface]
(53312144266274) 00 00
Event number: 0
Card state: Card inserted,
ATR: 3B 9F 96 80 1F C7 80 31 E0 73 FE 21 13 67 98 07 02 10 01 01 01 54
ATR: 3B 9F 96 80 1F C7 80 31 E0 73 FE 21 13 67 98 07 02 10 01 01 01 54
Or is this a consequence of my port forwarding attempt?
Thanks!
On Sat, Jul 8, 2023 at 12:12 PM Adrian Popa <adrian.popa.gh(a)gmail.com> wrote:
Hello everyone!
I'm new to simtrace and I'm trying to set up a test with a Simtrace2
board connected to a RPI (which I'll call the client from now on) and
a different RPI with an attached card reader (which I'll call the
server).
The server runs osmo-remsim-bankd and osmo-remsim-server (installed
from your debian repo). The bankd server has its configuration csv
file filled with the correct reader information. The
osmo-remsim-server runs on the same machine and has a mapping
configured via the python api tool to map client 1 to bank 1, like so:
root@rpi-cardem-1:~# python3 /etc/osmocom/osmo-remsim-apitool -a
/clients: {'clients': []}
/banks: {'banks': [{'peer': 'B1', 'state':
'CONNECTED_BANKD',
'component_id': {'type_': 'remsimBankd', 'name':
'fixme-name',
'software': 'remsim-bankd', 'swVersion': '1.0.0'},
'bankId': 1,
'numberOfSlots': 5}]}
/slotmaps: {'slotmaps': [{'bank': {'bankId': 1, 'slotNr':
1},
'client': {'clientId': 1, 'slotNr': 1}, 'state':
'ACTIVE'}]}
The client runs osmo-remsim-client-st2 like this:
root@rpi-cardem-2:~# osmo-remsim-client-st2 --server-ip remsim-server
--server-port 9998 --client-id 1 --client-slot 1 --usb-vendor 1d50
--usb-product 60e3 --usb-config 1 --usb-interface 0 --usb-path "1-1.4"
However, based on the logs, it tries to contact the bankd server at
127.0.0.1:9999 instead of remsim-server:9999:
DRSPRO INFO ../rspro_client_fsm.c:307
RSPRO_CLIENT(server){REESTABLISH}: Creating TCP connection to server
at remsim-server:9998
DLINP NOTICE simtrace2_api.c:271 [0] <=
osmo_st2_cardem_request_config(features=00000001)
DLINP NOTICE input/ipa.c:141 remsim-server:9998 connection done
DRSPRO NOTICE ../rspro_client_fsm.c:127
RSPRO_CLIENT(server){REESTABLISH}: RSPRO link to remsim-server:9998 UP
DRSPRO INFO ../rspro_client_fsm.c:307
RSPRO_CLIENT(bankd){REESTABLISH}: Creating TCP connection to server at
127.0.0.1:9999
DRSPRO NOTICE ../rspro_client_fsm.c:127
RSPRO_CLIENT(bankd){REESTABLISH}: RSPRO link to 127.0.0.1:9999 DOWN
The bankd server listens on 0.0.0.0 on the server side:
root@rpi-cardem-1:~# netstat -tpan | grep osmo | grep LISTEN
tcp 0 0 0.0.0.0:9997 0.0.0.0:*
LISTEN 409/osmo-remsim-ser
tcp 0 0 0.0.0.0:9998 0.0.0.0:*
LISTEN 409/osmo-remsim-ser
tcp 0 0 0.0.0.0:9999 0.0.0.0:*
LISTEN 405/osmo-remsim-ban
My question is - how is osmo-remsim-client-st2 getting the IP address
of the bankd server? What did I do wrong?
I've tried a few tricks to redirect traffic from 127.0.0.1:9999 to
remsim-server:9999, but so far have failed. This is what I've tried as
a proxy, but the connection seems to get garbled because netcat
expects LF terminated strings:
nc -l 127.0.0.1 9999 | nc remsim-server 9999
Thanks for the help
Cheers,
Adrian
11 Jul
11 Jul
10:36 a.m.
Hi Adrian,
I think the problem might be that you connect your bankd to the server via
localhost/loopback IP. This means the server stores '127.0.0.1' as the bankd
IP and then passes it on to the client.
Simply tell your bankd to connect to a "real" IP address of remsim-server,
this way the bankd-side source address selection will also use a "real" address
and hence register that in the remsim-server instaed of 127.0.0.1
--
- Harald Welte <laforge(a)osmocom.org> https://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)
12 Jul
12 Jul
3:30 p.m.
Thank you for the help. I had started osmo-remsim-bankd with -i
0.0.0.0 thinking it would listen on all interfaces. I used a fixed IP
and now the client can use it.
This can be considered solved
Cheers
On Tue, Jul 11, 2023 at 11:45 AM Harald Welte <laforge(a)osmocom.org> wrote:
Hi Adrian,
I think the problem might be that you connect your bankd to the server via
localhost/loopback IP. This means the server stores '127.0.0.1' as the bankd
IP and then passes it on to the client.
Simply tell your bankd to connect to a "real" IP address of remsim-server,
this way the bankd-side source address selection will also use a "real"
address
and hence register that in the remsim-server instaed of 127.0.0.1
--
- Harald Welte <laforge(a)osmocom.org> https://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)
19 Jul
19 Jul
9:57 a.m.
Hi Adrian (and list):
On Wed, Jul 12, 2023 at 04:30:19PM +0300, Adrian Popa wrote:
Thank you for the help. I had started
osmo-remsim-bankd with -i
0.0.0.0 thinking it would listen on all interfaces. I used a fixed IP
and now the client can use it.
This can be considered solved
I've removed potentially misleading references to 127.0.0.1 from the wiki page
yesterday, and we also have the following patches in review which should make it easier
to avoid (and if still used: spot) any setup that is using loopback addresses:
* https://gerrit.osmocom.org/c/osmo-remsim/+/33812
* https://gerrit.osmocom.org/c/osmo-remsim/+/33813
--
- Harald Welte <laforge(a)gnumonks.org> https://laforge.gnumonks.org/
============================================================================
"Privacy in residential applications is a desirable marketing option."
(ETSI EN 300 175-7 Ch. A6)
306
days inactive
317
days old
4 comments
3 participants
participants (3)
-
Adrian Popa -
Harald Welte -
Harald Welte