This is an automated email from the git hooks/post-receive script. It was generated because a ref change was pushed to the repository containing the project "Osmocom BTS-side code (Abis, scheduling, ...)". The annotated tag, fairwaves/0.3.0-fw-4 has been created at 31bd8e836dc68abe2f9c78e91e737f832213920e (tag) tagging b78554342cb2344b13c17bfeaada0509cac5b51c (commit) replaces 0.3.0 tagged by Alexander Chemeris on Tue Jul 21 13:38:05 2015 -0400 - Log ----------------------------------------------------------------- Fairwaves 0.3.0~fw-4 version. Alexander Chemeris (13): trx: Implement BER calculations. tests: Update bursts_test to accommodate BER calculations. trx: More logging for voice frame decoding functions. trx: Fix typo in a log message. trx: Remove unused variables. trx: Cleanup unused parts of loops.c trx: Assume 100% BER if total decoded bits is 0 in l1if_process_meas_res() trx: Send POWERON/OFF commands to osmo-bts only for the first channel. trx: fix potential use of uninitialized toa variable. l1sap: Fix use-after-free in loopback mode. tests: Update busrsts_test build. vty: Add commands to manually activate/deactivate a channel. debian: Update changelog to 0.3.0~fw-4 Andreas Eversberg (99): Remove obsolete osmo-bts-bb code handover: Introduce debug area for handover related items handover: Implement generating HANDOVER DETECTION in rsl_tx_hando_det handover: Set basic values for handover, remember the activation reason handover: Add generic handling for handover sysmo-bts: Use correct boundaries of L1 msg when forwarding to L1 proxy Add header file of PH-/MPH-/TCH-SAP interface to common part of osmo-bts Add BCCH message to PH-/MPH-/TCH-SAP interface Add RACH message to PH-/MPH-/TCH-SAP interface Add PCH/AGCH message to PH-/MPH-/TCH-SAP interface Add PDCH messages to PH-/MPH-/TCH-SAP interface Add TIME (MPH_INFO) IND messages to PH-/MPH-/TCH-SAP interface Relace bts_model_get_time() by get_time() at common part Move chan act/rel/modify from bts_model to PH-/MPH-/TCH-SAP interface Add TCH messages to PH-/MPH-/TCH-SAP interface Add SDCCH/SACCH/FACCH messages to PH-/MPH-/TCH-SAP interface Add MEAS (MPH_INFO) IND message to PH-/MPH-/TCH-SAP interface sysmobts: Clean up transitions for lchan cipher state Correctly fill system information messages from BSC Move loopback control VTY commands from osmo-bts-sysmo to common part Send primitives at PH-/MPH-/TCH-SAP interface via GSMTAP Move gsmtap VTY commands from osmo-bts-sysmo to common part Add gsmtap option to command line to main.c of osmo-bts-sysmo sysmobts: Forward CMR from L1 (Phone) to RTP payload Remove obsolete gsmtap handling from osmo-bts-sysmo part. Move detection of handover frames from sysmo-bts code to common code ABIS: Support for multiple RSL connections Introduce osmobts-trx, a layer 1 implementation for OpenBTS tranceivers Add test code for testing GSM burst transcoding TRX: On negative response of critical commands, shutdown BTS Introduce bts_model_abis_close to indicate ABIS link failure. TRX: Power down tranceiver and reset scheduler, if abis link is lost TRX: Completed transcoding of TCH with reordering Table 2 of TS 05.03 Add test routing to test transcoding of TCH FR / FACCH frames Fix: Check right result on bursts_test TRX: Fixes and improvements of scheduler TRX: Use received TRX clocks to determine availablility of tranceiver TRX: Fix, never send confirm for DEACT SACCH request (TS 05.08 4.6) TRX: Minor fixes, especially handle TOA of RACH correctly TRX: Fixed swapped stealing bits TRX: Completed TCH/F full rate support TRX: Allow transcoding of TCH FR with MSB first (RTP) or LSB first (E1) TRX: Lost TCH frame detection of omitted bursts from tranceiver TRX: PDTCH (GPRS) works now TRX: Add test code for PDTCH transcoding TRX: Detect missing received bursts and fill them with zero-sbits TRX: By default, send 20 frames in advance to tranceiver TRX: Cleanup of channel transcoding TRX: Replaced GSM 06.10 ordering table by table in libosmocodec TRX: Ciphering TRX: Fix of SCH burst data TRX: Fixes to TRX interface TRX: Improved handling of clock indications. TRX: Implementation of MS power and timing advance loops TRX: Out of range primitives found in downlink queue are not an error Use link timeout value from BSC via OML attribute. TRX: Code cleanup, prepare for other codecs than GSM full rate TRX: Add support for EFR transcoding Get RSSI from received uplink data and send to PCU Change to new structure of multirate at gsm_data_shared.h Support for AMR full speech TRX: Add AMR Payload handling TRX: Support for TCH/H and GSM half rate transcoding TRX: Support for AMR half speech TRX: Reset ciphering state when closing channel TRX: Add VTY options to enable and disable SETTSC and SETBSIC Allow one or more TRX to configure via VTY Fix: Cleanly free TRX instances during initialization in case of an error TRX: Fixed typos tranceiver -> transceiver TRX: Report measurements TRX: Clear lchan state when resetting TRX TRX: Handover access burst support TRX: Use correct slot type for GSM_PHCAN_BCCH TRX: Disable handover burst detection when closing channel during detection TRX: Process real time scheduling option is now similar to sysmobts Add test case for successful handover and unsuccessful handover TRX: Set ciphering to an initial state when activating channel TRX: If no cipher algorithm is given, or if it is a5/0, reset cipher state TRX: No need to set mode and cipher for PDCH TRX: Fixup ciphering state names after rebasing TRX: Add bts_model_trx_close to TRX implementation Fix: Process all TRX on GSM Time indication, not only C0 TRX: Close TRX (shutdown all active channels) on ABIS link failure Fix: Retrieve ARFCN (from OML) for TRX other than C0 TRX: Do not send burst on IDLE channels at TRX != C0 trx: Add option to set transmit power reduction via OML (BSC) TRX: Fixed chan_nr for SACCH/8(7) at scheduler TRX: Changed logging of unserved primitives from LOGL_NOTICE to LOGL_INFO Allow TRX 0..254 at VTY, even if less TRX are available TRX: Add VTY option to allow setting RTS advance in frames TRX: Free bust buffer memory to when changing lchan type Fix: Call e1inp_vty_init() before reading config file HACK: Make ABIS work when reestablishing TRX: Activate LCHAN of CCCH when CCCH is configured on time slot trx: Set lchan inactive, only if the dedicated channel is deactivated TRX: Show which TRX does not respond or rejects a command ABIS: Support of multiple RSL connections for ABIS/ipaccess handover fix: handover_frame must call handover_reset, not itself TRX: Check if Transceiver indicates an out of range clock Harald Welte (33): initial import of EEPROM calibration read routines eeprom: cache the file descriptor instead of fopen/fclose all the time eeprom: wrap DISP_ERROR #ifdef/endif in PERROR() macro calib: Read calibration data from EEPROM, not just files calib: Add fixup for incompatible calib data / firmware version calib: Fix for new EEPROM Mode; better log msgs Don't send OML STATE CHANGE before OML is connected make oml_mo_state_init() a void function EEPROM: add model_nr, model_flags and trx_nr to EEPROM sysmobts_par: support for negative parameters sysmobts_par: Implement new EEPROM parameters (trx_nr, model_nr, model_flags) sysmobts_par: add value_string definitions for parameters add sysmobts-util command-line utility to read/write EEPROM parameters Use GPS as default clock source on sysmoBTS 2050 migrate away from our own abis.c code to libosmoabis Call e1inp_vty_init() to make abis interface accessible from VTY abis: Use OML remote (BSC) address if RSL CONNECT contains no IP abis: delay l1if_reset() until OML link is established sysmobts: Read supported bands from EEPROM Do not attempt to initialize L1 with a band unsupported by hardware sysmobts: Set nominal transmit power depending on sysmoBTS model sysmobts: Don't use the clock calibration value on external clocks sysmobts: make L1 power configurable sysmobts: don't call sysmobts_get_nominal_power() twice sysmobts: Permit local override of transmit power above 23 dBm sysmbts calibration: print error if we fail to read from EEPROM sysmobts calibration: skip bands not supported by L1 sysmobts calibration: Load further tables even if one fails sysmobts: Specify TRX nominal maximum tx power as fMaxTxPower common/oml.c: Send OML NACK if bts_model_check_oml() returns negative common/rsl.c: Allow bts_model_rsl_chan_act() to return negative cause sysmoBTS OML: Don't permit TSC != BSIC bts_model_rsl_chan_act(): Handle tp==NULL case gracefully Holger Hans Peter Freyther (83): misc: Please ignore the commit. It is done to test a jenkins trigger sysmobts: Do not write "trx-calibration-path (null)" in the config file lapd: Fix a +ptrsize memory leak for each opened lchan sysmobts: Fix potential memory leaks in the prim callback handling sysmobts: Use writev for the outgoing data of the write queue sysmobts: Read multiple primitives at once but only up to 3 sysmobts: Make sure we receive every SACCH frame to count S properly sysmobts.service: Reset the firmware after the service exited sysmobts: Introduce an auto-band config to ease DCS/DCS, PCS/PCS changes calib: Attempt to fix the build for v2.7 of the api headers calib: Attempt to fix the build for v2.7 of the api headers sysmobts.service: Use multi-user.target as target to fix ordering misc: Fix various warnings in the code sysmobts: Fix a typo that broke the ciphering with A5/0 > 0 sysmobts: Read the mac and determine fixup only once during start sysmobts: Add a method to free cached epprom resources sysmobts: Cache the eeprom_Cfg_t for reading tx/rx calib data sysmobts: The code allowed a out of bounds access to temp_type_str rsl: Fix the audio handling after the 'alignment' handling fix oml: Remove the unused nofh variable from oml_mo_tx_sw_act_rep eeprom: After eeprom_write g_file could point to a closed file eeprom: Check the return value of the fseek in all calls calib: The call to fscanf can fail and we should check the return value sysmobts-calib: For gps the sign/difference appears to be different Merge branch 'shared/libosmo-abis-late-init' misc: Fix resource leak when the ioctl is failing sysmobts: Attempt to fix the compilation for the v1 hardware sysmobts: Fix the unit test after the internal band changes lchan: Print the name of the channel already in release request rsl/pcu: Do not send a CHAN ACT to the BSC on PCU usage pcu: Exit the PCU in case of loss of the sysmobts connection rsl: Rename abis_rsl_sendmsg to avoid symbol clash with libosmo-abis bts: Fix a typo in the log message bts: Fix typos in the log messages sysmobts: Print the model number that is not supported. sysmobts: Make the eeprom/nominal power reading backward compatible sysmobts: Activate the BCCH silently have have state set to active bts: Fix crash of receiving data during the release process sysmobts: Remove stray semicolon from the PCU band filtering code. sysmobts: Fix resource leak in the error condition sysmobts: Change the ARRAY_SIZE to a constant number sysmobts: Fix compiler warning by including utils.h contrib: Remove the stray "FIVE" print it doesn't make any sense measurement: Speculative performance change misc: Avoid using double numbers on our ARM tch: Do not log every single RTP packet and air frame sysmobts: Specify the constant as a float and not a double sysmobts: Specify the parameters that can be read from the EEPROM misc: Allow to cross-execute the testsuite using qemu sysmobts-mgr: Make it possible to not write to the EEPROM sysmobts-mgr: Parse logging related commands, re-order init function sysmobts-mgr: Parse the daemonize option sysmobts-mgr: Respond to ipaccess-find broadcast messages sysmobts-mgr: Check the return value of the sendto sysmobts: Launch the sysmobts-mgr in the screen and add service file sysmobts: Honor the LDFLAGS when building the sysmobts-calib utility sysmobts: Correct sending of LAPDm frames on the SACCH sysmobts: Add the requested TA to the field ACCH header l1fwd-proxy: Bind to the bts VTY port to block another process systemd: Disable colors in the stdout log rsl: Do not allow IPA CRCX on non traffic channels sysmobts: Remove debug left over from the SACCH fixes we made Revert "bts/vty: Use new vty_install_default() function, adjust prompts" pcu: Avoid crash when closing the PCU socket sysmobts: Do not generate RF Conn failure for CCCH and PDCH Merge branch 'jerlbeck/agch-queue' handover,sysmobts: Refactor the parsing/handling of the access delay handover,sysmobts: Handle idle needed for preparation of rach handling handover,sysmobts: Handle handover in the sysmobts code sysmobts: Do a RF mute at initialization when the RC is locked misc: Fix the build breakage now that we have btsconfig.h misc/sysmobts: Another small change to help in finding the header misc: Ignore some of the new configure and test files sysmobts: Improve the log message and print the hLayer2 we don't know sysmobts: Change the order to follow the RX handling code sysmobts: Add a magic number to the hLayer2 to differentiate it systemd: Do not restart with a broken config file or such systemd: Provide the pcu direct mode sysmobts: Honor power reduction on older sysmoBTSv2 hardware oml: Indicate the kind of object passed as the void* sysmobts: Apply the potentially new max_power_red on the TRX agch/pcu: Fix crash for AGCH commands queued by the PCU sysmobts: Fix build for the v1 of the sysmobts Ivan Kluchnikov (6): fix: make sysmobts tests only when sysmobts is enabled handover fix: we can receive handover rach on trx == bts->c0 abis: Add support of libosmo-abis v 0.3.0 debian: Add gsm_data_shared.c file to make packaging possible debian: Add debian directory to ease building packages debian: Add gsm_data_shared.h file to make packaging possible Jacob Erlbeck (22): sysmobts: Add L1P_T_INVALID to l1prim_type sysmobts: Add mappings for MuteRfReq/MuteRfCnf sysmobts: Add L1 support for the new RF mute request sysmobts: Do a RF mute when Radio Carrier is locked sysmobts: Use status flags instead of direct LED access sysmobts: Only set RC state to LOCK if all channels are muted sysmobts: Notify the BSC about all muted lchans rsl/si: Fix resetting bits in bts->si_valid bts/vty: Use new vty_install_default() function, adjust prompts agch/rsl: Fix msgb handling for IMMEDIATE ASSIGN agch: Keep track of AGCH queue length agch/pch: Put CCCH message generation into common agch: Log error if BS_AG_BLKS_RES is != 1 in SI3 agch: Recalculate length limit of AGCH queue agch: Add simple counters agch/test: Add test for AGCH queue handling agch/pch: Use PCH for AGCH msgs agch: Manage AGCH queue length agch: Add VTY queue management configuration agch: Merge IMM.ASS.REJ if possible when enqueueing agch: Remove obsolete comment oml: Pass all valid state change requests to the model Martin Hauke (3): tests: make tests for sysmobts conditional build: Use AM_CPPFLAGS in Makefile.am fix some typos in comments Nicolas J. Bouliane (1): sysmobts: Set the clock calibration to the value read from the eeprom Thomas Tsou (1): TRX: Remove extra TCH/HS puncturing value Álvaro Neira Ayuso (4): src/misc/sysmobts_misc: Fixed wrong TEMP_PATH misc/sysmobts_misc.c: Read temperature from microcontroller misc/sysmobts_mgr: Added new header created in the configure misc/sysmobts_misc: function for switching off/on and requesting status power ----------------------------------------------------------------------- hooks/post-receive -- Osmocom BTS-side code (Abis, scheduling, ...)