Yeah, it's really easy with install.sh now - basic recipe (assuming you have sudo access):
apt-get install git cd git clone https://github.com/boatbod/op25 cd op25 ../install.sh
(and apt-get install gnuplot / gnuplot-x11, if needed)
73,
~iain / N6ML
On Wed, Mar 28, 2018 at 9:34 AM, 'William Becks' wa8wg@centurytel.net [op25-dev] op25-dev@yahoogroups.com wrote:
Dick,
One last thought… Both Max’s and Graham’s versions include install.sh that will build all of the dependencies needed to run GNU Radio and OP25 with the exception of gr-gnupot that you’ll have to install manually. The install script will remind you of this, however.
Bill, WA8WG
*From:* op25-dev@yahoogroups.com [mailto:op25-dev@yahoogroups.com] *Sent:* Wednesday, March 28, 2018 10:37 AM *To:* op25-dev@yahoogroups.com *Subject:* Re: [op25-dev] Re: Christmas Announcements 2017
Just curious....has anyone put this new op25 on ubuntu 16.04 successfully yet? If so, did you follow the instructions presented way earlier in previous emails?
On Tuesday, February 20, 2018, 9:38:13 PM CST, kb9mwr@yahoo.com [op25-dev] op25-dev@yahoogroups.com wrote:
Okay. Yes I believe those are the two nxdn speeds. I don't have a nxdn radio nor do I know of anyone locally with one.
From: https://groups.yahoo.com/neo/groups/mmdvm/conversations/messages/16378
Hi All
I converted the MMDVM NXDN implementation over to very-narrow mode, aka
NXDN 4800. I decided not to >make it switchable to NXDN 9600 as it would then mean that people could choose to make their systems >incompatible with existing networks. So NXDN 4800 it is.
It's all been checked into GitHub for both the MMDVMHost and MMDVM
firmware under the nxdn branch.
Currently it'll be an RF only repeater, but it will allow you to play. I
intend to get a simple NXDN reflector >active and make a simple NXDN parrot available too. This will allow basic testing and communication until we
can do something better.
There is a bug in the display code, maybe Nextion only, where the screen
doesn't update correctly at the end >of a transmission, and I can't find it! So any takers to look at that would be appreciated.
I've asked Andy CA6JAU to review my new filters for NXDN 4800 to make
sure that they're correct and that I >have transmit amplitude (deviation) correct also. Even if they aren't, you can try installing it and talking to
yourself.
Jonathan G4KLX