Ah yes. I am not sure that you can get audio with the -t specified instead of using -T trunk.tsv on the rx.py command line. The intent of having him use -t for initial startup was to determine the NAC of his system ,and to eliminate any possibilities incorrect formatting of the trunk.tsv file from preventing op25 from running. Time now to add trunk.tsv to the mix now that op25 will start up and run.
Bill
From: op25-dev@yahoogroups.com op25-dev@yahoogroups.com Sent: Friday, November 30, 2018 9:38 PM To: op25-dev@yahoogroups.com Subject: Re: {Disarmed} RE: [op25-dev] Re: Beginner's Guide To Setting Up OP25 From Scratch
On Fri, Nov 30, 2018 at 7:28 PM wllmbecks@gmail.com mailto:wllmbecks@gmail..com [op25-dev] <op25-dev@yahoogroups.com mailto:op25-dev@yahoogroups.com > wrote:
You’re not going to get any audio from the speakers with the -w option specified as this is telling op25 to output udp packets. Drop the -w and replace with -V per the following. ./rx.py --args 'airspy' -S 3000000 -N 'LNA:15,MIX:15,IF:15' -f 769.80625e6 -t -q 0 -2 -V -U 2> stderr.2
I have both -w -and -U in mine, and it outputs audio. -w is probably not necessary, but I don't think it hurts anything.
Not sure about -t - it's labeled "use experimental tone detect algorithm" - I'm not using that.
~iain
From: op25-dev@yahoogroups.com mailto:op25-dev@yahoogroups.com <op25-dev@yahoogroups.com mailto:op25-dev@yahoogroups.com > Sent: Friday, November 30, 2018 7:14 PM To: op25-dev@yahoogroups.com mailto:op25-dev@yahoogroups.com Subject: RE: {Disarmed} RE: [op25-dev] Re: Beginner's Guide To Setting Up OP25 From Scratch
Thanks, found it. It's called "Ubuntu 18.04.1 LTS.vmx". So I went ahead and added this line to it and saved it:
usb.quirks.device0 = "0x1d50:0x60a1 skip-reset, skip-refresh, skip-setconfig"
Hillsborough County is actually a mixture of Phase I & II. Now when I run this line:
./rx.py --args 'airspy' -S 3000000 -N 'LNA:15,MIX:15,IF:15' -f 769.80625e6 -t -q 0 -2 -w -U 2> stderr.2
I get this:
But I don't hear any audio out the speakers. I did a speaker test in the sound settings in Ubuntu and it's working fine on left and right. So it looks like this is coming along, but still can't hear anything.
trunktracker@tampabay.rr.com mailto:trunktracker@tampabay.rr.com
From: op25-dev@yahoogroups.com mailto:op25-dev@yahoogroups.com [mailto:op25-dev@yahoogroups.com] Sent: Friday, November 30, 2018 8:00 PM To: op25-dev@yahoogroups.com mailto:op25-dev@yahoogroups.com Subject: Re: {Disarmed} RE: [op25-dev] Re: Beginner's Guide To Setting Up OP25 From Scratch
On 11/30/18 18:46, 'Trunk Tracker' trunktracker@tampabay.rr.com mailto:trunktracker@tampabay.rr.com [op25-dev] wrote:
*So now I'm looking at all this and don't know where this "* *VMWare Virtual Machine Configuration file" is. Where do we find this file?
You are looking for a file named ____.vmx where ____ is probably the name of your virtual machine. The .vmx file is typically located in the directory where you created the virtual machine. You can edit it with Notepad.
-- Apu