op25-dev

op25-dev@lists.osmocom.org

309 discussions

by md123＠nycap.rr.com 09 Mar '13

09 Mar '13

Hi everybody! I am in the process of collecting some signals. Do I want FM discriminator output or digital IQ? I dont know what kind of file to feed to the file source block: .wav or .mp3 or what? Thanks, Matt ----------------

1 0

Re: [op25-dev] Re: Updating the OP25 codebase
by Keith S 08 Mar '13

08 Mar '13

I'm not much of a coder but I can assist in taking captures of a p25 phase II system. There is a site near me. I have a gnuradio setup using rtlsdr dongles. Let me know how and what you would like me to capture. There are audio channels and a Motorola trunking control channel on this site. I've done some basic decoding of the control channel with some windows apps already but haven't tried anything with gnuradio yet. Keith ikj1234i <ikj1234i(a)yahoo.com> wrote: > > >Hello Stevie > >Good to hear from you - this sounds like a good idea, for sure. > >It's always tempting to take such an opportunity as this to rewrite the entire system from scratch :) > >I think another piece to add to the puzzle that perhaps might be broken out as a separate item of concern would be UHD support. > >Mostly I think that would affect our py code but not so much our C++ blocks. > >Also when you added the fsk4 demod block to the op25 core it took me longer than it should but as of a few days ago I checked in several remaining stragglers to svn, all of our py code is now upgraded to use the in-tree version. I think there may have been one or two _very_ old ones that still use Franks' p25 and RD-LAP protocol handlers, but those apps date back to the days before our project had its own protocol processing... > >Also for GR 3.6 in addition to cmake there is a new directory structure that apps are to conform to. > >Looking further out there is some very exciting new stuff coming in GR for handling packet-oriented streams with timed transmission features. This looks like it should be a good fit for our repeater work, but will require effort to make use of the new capability. > >Finally, we're interested in P25 phase II, and are looking for RF captures of various phase II scenarios. > >Best > >Max > >--- In op25-dev(a)yahoogroups.com, Steve Glass <stevie.glass@...> wrote: >> >> Hi Everyone >> >> I think its time to organize a drive to move the code to the latest version >> of GNURadio. The OP25 codebase is suffering badly from bit rot and that >> needs fixing. GNURadio has evolved and developed many new features we've >> not properly kept up with. Fixing the codebase will mean that we can get >> people working with much less hassle than at present. >> >> I've created a wiki >> page<http://op25.osmocom.org/wiki/wiki/ReengineeringPage>to act as the >> starting point. I shall start opening tickets this week and >> start mapping out the direction of the exercise. For now I want to focus >> the effort on the core OP25 components and we can use GRC as our top-level >> test harness. Take a look and take part in the discussion. >> >> Atb >> >> Steve >> > > > > >------------------------------------ > >Yahoo! Groups Links > > >

2 1

Updating the OP25 codebase
by Steve Glass 08 Mar '13

08 Mar '13

Hi Everyone I think its time to organize a drive to move the code to the latest version of GNURadio. The OP25 codebase is suffering badly from bit rot and that needs fixing. GNURadio has evolved and developed many new features we've not properly kept up with. Fixing the codebase will mean that we can get people working with much less hassle than at present. I've created a wiki page<http://op25.osmocom.org/wiki/wiki/ReengineeringPage>to act as the starting point. I shall start opening tickets this week and start mapping out the direction of the exercise. For now I want to focus the effort on the core OP25 components and we can use GRC as our top-level test harness. Take a look and take part in the discussion. Atb Steve

2 2

AttributeError: 'module' object has no attribute 'fsk4_slicer_fb'
by md123＠nycap.rr.com 08 Mar '13

08 Mar '13

using the command in terminal: cd ~/src/op25/python ./audio_p25_rx.py -a i get this error: Using Volk machine: ssse3_32 Traceback (most recent call last): File "./audio_p25_rx.py", line 1044, in <module> app = stdgui2.stdapp(p25_rx_block, "APCO P25 Receiver", 3) File "/usr/local/lib/python2.7/dist-packages/gnuradio/wxgui/stdgui2.py", line 38, in __init__ wx.App.__init__ (self, redirect=False) File "/usr/lib/python2.7/dist-packages/wx-2.8-gtk2-unicode/wx/_core.py", line 7981, in __init__ self._BootstrapApp() File "/usr/lib/python2.7/dist-packages/wx-2.8-gtk2-unicode/wx/_core.py", line 7555, in _BootstrapApp return _core_.PyApp__BootstrapApp(*args, **kwargs) File "/usr/local/lib/python2.7/dist-packages/gnuradio/wxgui/stdgui2.py", line 42, in OnInit self._max_noutput_items) File "/usr/local/lib/python2.7/dist-packages/gnuradio/wxgui/stdgui2.py", line 64, in __init__ self.panel = stdpanel (self, self, top_block_maker, max_nouts) File "/usr/local/lib/python2.7/dist-packages/gnuradio/wxgui/stdgui2.py", line 86, in __init__ self.top_block = top_block_maker (frame, self, vbox, sys.argv) File "./audio_p25_rx.py", line 97, in __init__ self.__init_gui(frame, panel, vbox) File "./audio_p25_rx.py", line 298, in __init_gui self.slicer = op25.fsk4_slicer_fb(levels) AttributeError: 'module' object has no attribute 'fsk4_slicer_fb' can anybody help me with this error please?

3 8

Sample P25 files
by md123＠nycap.rr.com 07 Mar '13

07 Mar '13

Hi guys! Does anyone know where i could find some sample p25 files to test op25 with? Thanks, Matt --------------------

1 0

Repeater Build attempts
by Doug Bade 05 Mar '13

05 Mar '13

Well it looks like in order to build this I am going to need a little more input from anyone who has succeeded. Every attempt with every OS I have tried has failed at some point due to lack of direct support for some modules and or failures to compile to outright incompatibility. Ubuntu 12.0.4 LTS got me the closest however when attempting to compile Zaptel, the compile fails with errors which googling them results in commentary that the Kernel is too new so I will need an older Kernel in Debian or Ubuntu. How old??? Good question. as all the notes in Allstar's build indicate CentOS 5.x is supported, nothing newer.. that does not help me much in the debian world. I tried several versions of CentOS 5.x , and all result in various modules being of incorrect versions available or would not compile. I tried CentOS 6.x and got closer but failed to compile Zaptel for the reasons stated above. So if the intent is to allow us to build over a wide array of OS's I can say that Isn't going happen. The modules are so critical that have been used that I have yet to find a version that will build. So unless someone wants to give some specifics in versions of OS that are currently running asterisk as well as op25 as well as GNURadio, I have been thus far unable to find a combination that supports all of them. I tried starting with Allstar and with XiPar and neither has support for GUI nor was I able to get a GUI to run, apparently that process eludes me and my limited research to get it running as well as patience. I would say with the current state of the docs, at best Linux experts seem to be the only group of builders that are going to be able to step through the minefield of a build. I am not criticizing the docs, I understand they are written to be generic in many ways, but the build requirements are far from generic in OS/Kernel requirements to get it running. While I am maybe a power user of Linux, I am not a developer. so I may be above my knowledge base attempting the build. I own and operate a dozen or so linux box's in my life including VMWare virtualization on CentOS at work. I thought the instructions looked do-able for my skillset. I do not mean to criticize as much as suggest a little more documentation on OS baseline starting points are in order.. As Debian and Ubuntu seem to build best, that maybe tell us what version is in use so we can get Zaptel to compile??? If that part fails, the rest is moot. Without Asterisk running the repeater part is dead. Doug KD8B

3 5

Repeater Build
by Doug Bade 04 Mar '13

04 Mar '13

I am going to make a more scientific approach to the build, I decided to dig into Asterisk docs about platforms, I am not sure how tailored the Allstar Link versions of this is in their svn but will start with baseline specs in the Asterisk docs. It looks like Zaptel should be able to build on any 2.6 kernel which means up to 11.04 or so Ubuntu, or CentOS up to 6.x should work. A cannot recall how far I got on CentOS 6.x with allsar build but as Allstar is based on CentOS , that may be the closest match. I am going to concentrate on getting Zaptel to build.. Can someone tell me if ZTDummy is the only driver needed???? For a Sound card build??? It looks like CentOS 6.x Debian 6.x and Ubuntu 11.x should all be Kernel 2.6.x and in theory support asterisk repeater.. We shall see.. If I can get that working next will be what it takes to get GNURadio running. Doug KD8B

1 0

gr-fsk4 install Error: Unable to find 'pmt_swig.i'
by md123＠nycap.rr.com 04 Mar '13

04 Mar '13

becuase i am stuck on this on an error (AttributeError: 'gr_hier_block2_sptr' object has no attribute 'set_callback') i decided to try to build again. when trying to install the 4fsk demodulator i get this error: make[2]: Entering directory `/home/matt/gr-fsk4/src/lib' /usr/bin/swig -c++ -fvirtual -python -modern -I/usr/local/include/gnuradio/swig -I/usr/local/include/gnuradio -module fsk4 -o fsk4.cc ../../src/lib/fsk4.i /usr/local/include/gnuradio/swig/gr_basic_block.i:26: Error: Unable to find 'pmt_swig.i' note that when i run op25 the first output line is "Imported legacy fsk4". so now i am confused as to how grc is importing the fsk4 if i cant even install it? Cheers, Matt

1 0

Error: Port has too many connections.
by md123＠nycap.rr.com 04 Mar '13

04 Mar '13

if i don't disable the 'raised root cosine filter' then i get this error in the op25 properties box: Sink - bb(0): Port has too many connections. i already had to disable the 'wx gui fft sink' to get rid of the "AttributeError: 'gr_hier_block2_sptr' object has no attribute 'set_callback'" error which i believe stops the op25 python gui from running. has anyone else had to deal with this "too many connections" error? thanks guys!

1 0

re displaying the raw IMBE data
by lynnolium2005 02 Mar '13

02 Mar '13

After a long time I have finaly got OP25 working, my thanks to the people who helped get it going and the numerous posts here that clarified issues. there is one change I would like to make to the code. this is to change the way the data is either displayed by wireshark or a new start command that will display the 88 bit rew IMBE data rather than the 144 bit interlaced data. I have been told that OP25 will display the data in thuis format but I will need help (step by step if possible) to do it

1 0

← Newer
1
...
23
24
25
26
27
28
29
30
31
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

op25-dev