op25-dev February 2016

op25-dev@lists.osmocom.org

1 participants
18 discussions

Re: [op25-dev] waterfall
by Sean Kealy superstardodge＠yahoo.com [op25-dev] 07 Feb '16

07 Feb '16

Sorry, entering the command lne arguments and parameters is where im struggling, what could I enter for a command if I wanted to listen to 139.5600? -------------------------------------------- On Sun, 2/7/16, Matt Ames matt.ames7bc(a)gmail.com [op25-dev] <op25-dev(a)yahoogroups.com> wrote: Subject: Re: [op25-dev] waterfall To: op25-dev(a)yahoogroups.com Received: Sunday, February 7, 2016, 2:50 PM Tell me this - what frequency did you tell it to tune to using the command line arguments? Does the line that says "[R820T] PLL not locked for 3570434 Hz!" give you any hints as to what may have gone wrong? As has been suggested, check out the command line arguments before running the program. On 8 February 2016 at 09:25, Sean Kealy superstardodge(a)yahoo.com [op25-dev] <op25-dev(a)yahoogroups.com> wrote: > > > When I open waterfall i get the following pasted below in terminal, and > the waterfall doesnt do anything, do I have to open grc in terminal first > somehow? > thanks > sean > > root@kali:~# ./op25_grc.py > Using Volk machine: sse3_64_orc > RTL2832 Source block configuration: > Read length (bytes): 262 > Buffer enabled: yes > Buffer multiplier: 8 > Buffer size (samples): 1048 > Samples per read: 131 > Buffer level: 50.0% > Successfully initialised demod: "ezcap EzTV" > Probing "e4k"...not found. > Probing "fc0013"...not found. > Probing "fc2580"...bad check value. > Probing "r820t"...found. > Found RTL2832 device: ezcap EzTV (tuner: Rafael Micro R820T) > Sample rate range: 900001 - 3200000 Hz > Crystal frequency: 28800000 Hz > [r820t] Initialised (default bandwidth: 0 Hz) > Wait delay: 0.196 ms > [R820T] PLL not locked for 3570434 Hz! > work wants more than the buffer size! > Capture threading starting: 7f904e7fc700 > rOShort bulk read: given 0 bytes (expecting 262) > rBlibusb error: the device has been disconnected [-4] > Capture threading aborting due to libusb error: 7f904e7fc700 > No longer running after packet notification - signalling EOF... > > > > >

1 0

waterfall
by Sean Kealy superstardodge＠yahoo.com [op25-dev] 07 Feb '16

07 Feb '16

When I open waterfall i get the following pasted below in terminal, and the waterfall doesnt do anything, do I have to open grc in terminal first somehow?thankssean root@kali:~# ./op25_grc.py Using Volk machine: sse3_64_orc RTL2832 Source block configuration: Read length (bytes): 262 Buffer enabled: yes Buffer multiplier: 8 Buffer size (samples): 1048 Samples per read: 131 Buffer level: 50.0% Successfully initialised demod: "ezcap EzTV" Probing "e4k"...not found. Probing "fc0013"...not found. Probing "fc2580"...bad check value. Probing "r820t"...found. Found RTL2832 device: ezcap EzTV (tuner: Rafael Micro R820T) Sample rate range: 900001 - 3200000 Hz Crystal frequency: 28800000 Hz [r820t] Initialised (default bandwidth: 0 Hz) Wait delay: 0.196 ms [R820T] PLL not locked for 3570434 Hz! work wants more than the buffer size! Capture threading starting: 7f904e7fc700 rOShort bulk read: given 0 bytes (expecting 262) rBlibusb error: the device has been disconnected [-4] Capture threading aborting due to libusb error: 7f904e7fc700 No longer running after packet notification - signalling EOF...

2 1

Re: [op25-dev] Re: run scope
by Sean Kealy superstardodge＠yahoo.com [op25-dev] 07 Feb '16

07 Feb '16

I cheked I have the gnu radio folder, op25 blocks and op25, i instlled it all fom pybombs,do I have to do anything else to install them -------------------------------------------- On Sat, 2/6/16, verymetl(a)hotmail.com [op25-dev] <op25-dev(a)yahoogroups.com> wrote: Subject: [op25-dev] Re: run scope To: op25-dev(a)yahoogroups.com Received: Saturday, February 6, 2016, 1:57 PM You can not run the scope app without passing parameters. Please see this wiki article: SignalScopePage – OP25 http://op25.osmocom.org/trac/wiki.png/wiki/SignalScopePage http://op25.osmocom.org/trac/wiki.png/wiki/SignalScopePage SignalScopePage – OP25 http://op25.osmocom.org/trac/wiki.png/wiki/SignalScopePage Signal Scope Installation Before running the scope app, check that the following standard pre-requisite packages are also installed: GNU Radio The op25 blocks... View on op25.osmocom.org http://op25.osmocom.org/trac/wiki.png/wiki/SignalScopePage Preview by Yahoo

1 0

scope.py 'CreateStatusBar' error on OSx
by el3ctr0magn3tic＠yahoo.com [op25-dev] 07 Feb '16

07 Feb '16

Hi all, New to the group here, been looking all over for similar issues to one I'm having, but to no avail. There was one mention of this exact error on the radioreference op25 "main" thread, but it seems it was left unsolved or forgotten. From detailed digging I've done, think it may be related to wxgui-3.0 vs 2.8? Or should I be running this with Gnuradio 3.6 instead? Greatly appreciate any assistance! The following is my baseline: OSx 10.10.4 Gnuradio 3.7.8.1 (installed via Macports) gr-op25 (Balint's git most recent version) - made some minor changes to cmake to find macports GR and libs gr-op25 seems to compile and build fine, however when running scope.py I get the following error, and the app never loads: $ python2.7 ./scope.py --args “hackrf” -f 502.9125e6 -S 8000000 -T trunk.tsv -2 Mac OS; Clang version 7.0.0 (clang-700.0.72); Boost_105900; UHD_003.009.001-MacPorts-Release gr-osmosdr v0.1.x-xxx-xunknown (0.1.5git) gnuradio 3.7.8.1 built-in source types: file fcd rtl rtl_tcp uhd hackrf bladerf rfspace airspy Using HackRF One with firmware git-44df9d1 gain: name: RF range: start 0 stop 14 step 14 gain: name: IF range: start 0 stop 40 step 8 gain: name: BB range: start 0 stop 62 step 2 supported sample rates 8000000-20000000 step 2000000 Traceback (most recent call last): File "./scope.py", line 2817, in <module> app = stdgui2.stdapp(p25_rx_block, "APCO P25 Receiver", 3) File "/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/gnuradio/wxgui/stdgui2.py", line 46, in __init__ wx.App.__init__ (self, redirect=False) File "/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/wx-3.0-osx_cocoa/wx/_core.py", line 8628, in __init__ self._BootstrapApp() File "/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/wx-3.0-osx_cocoa/wx/_core.py", line 8196, in _BootstrapApp return _core_.PyApp__BootstrapApp(*args, **kwargs) File "/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/gnuradio/wxgui/stdgui2.py", line 49, in OnInit frame = stdframe (self.top_block_maker, self.title, self._nstatus) File "/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/gnuradio/wxgui/stdgui2.py", line 76, in __init__ self.panel = stdpanel (self, self, top_block_maker) File "/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/gnuradio/wxgui/stdgui2.py", line 98, in __init__ self.top_block = top_block_maker (frame, self, vbox, sys.argv) File "./scope.py", line 201, in __init__ self.__init_gui(frame, panel, vbox) File "./scope.py", line 537, in __init_gui self.frame.CreateStatusBar() File "/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/wx-3.0-osx_cocoa/wx/_windows.py", line 615, in CreateStatusBar return _windows_.Frame_CreateStatusBar(*args, **kwargs) wx._core.PyAssertionError: C++ assertion "!m_frameStatusBar" failed at ../src/common/framecmn.cpp(381) in CreateStatusBar(): recreating status bar in wxFrame

2 2

run scope
by Sean Kealy superstardodge＠yahoo.com [op25-dev] 06 Feb '16

06 Feb '16

When I try to run scope after running the env command this is what i get-what am i doing wrong? root@kali:~# cd pybombs root@kali:~/pybombs# ./pybombs env -v Settled on prefix: /root/target Initializing environmental variables... Loading recipes ... Writing out env...: PyBombs.sysutils - INFO - To set up your environment (in bash) run: "source /root/target/setup_env.sh" root@kali:~/pybombs# source /root/target/setup_env.sh root@kali:~/pybombs# cd src root@kali:~/pybombs/src# cd gr-op25 root@kali:~/pybombs/src/gr-op25# cd op25 root@kali:~/pybombs/src/gr-op25/op25# cd gr-op25_repeater root@kali:~/pybombs/src/gr-op25/op25/gr-op25_repeater# cd apps root@kali:~/pybombs/src/gr-op25/op25/gr-op25_repeater/apps# ./scope.py linux; GNU C++ version 4.9.2; Boost_105500; UHD_003.010.git-119-g42a3eeb6 gr-osmosdr v0.1.4-67-gac15e789 (0.1.5git) gnuradio 3.7.10git-47-gbd69c31e built-in source types: file osmosdr fcd rtl rtl_tcp uhd hackrf bladerf rfspace airspy redpitaya FATAL: No supported devices found to pick from. Trying to fill up 1 missing channel(s) with null source(s). This is being done to prevent the application from crashing due to gnuradio bug #528. Traceback (most recent call last): File "./scope.py", line 2751, in <module> app = stdgui2.stdapp(p25_rx_block, "APCO P25 Receiver", 3) File "/root/target/lib/python2.7/dist-packages/gnuradio/wxgui/stdgui2.py", line 46, in __init__ wx.App.__init__ (self, redirect=False) File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/_core.py", line 8628, in __init__ self._BootstrapApp() File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/_core.py", line 8196, in _BootstrapApp return _core_.PyApp__BootstrapApp(*args, **kwargs) File "/root/target/lib/python2.7/dist-packages/gnuradio/wxgui/stdgui2.py", line 49, in OnInit

2 1

Re: [op25-dev] Re: op25
by Sean Kealy superstardodge＠yahoo.com [op25-dev] 02 Feb '16

02 Feb '16

Ok I ran the source command , in the target folder where setup env.sg was,but I still get the import error when I try to run scope Any else I should do. -------------------------------------------- On Sun, 1/31/16, russ.innes(a)gmail.com [op25-dev] <op25-dev(a)yahoogroups.com> wrote: Subject: Re: [op25-dev] Re: op25 To: op25-dev(a)yahoogroups.com Received: Sunday, January 31, 2016, 8:15 PM Assuming you built it with all the defaults from pybombs, look for the ~/target directory in your home folder. Specifically, a file names setup_env.sh . type this first (when you find it) "source ~/target/setup_env.sh" (assuming it's in the "target" directory)

1 0

Wireshark output
by russ.innes＠gmail.com [op25-dev] 01 Feb '16

01 Feb '16

Is anyone else having issues with the wireshark output while using scope.py? Im not getting any UDP packets out, -w is specified and have tried a variety of options using -W xx.xx.xx.xx

1 0

Re: [op25-dev] Re: op25
by Sean Kealy superstardodge＠yahoo.com [op25-dev] 01 Feb '16

01 Feb '16

Ok thanks ill give it a try again tonight, im using rtl usb-dongle, when I tried to run scope.py it gve me an error, but I may have typed the run command wrong so ill try again with what you gave me Worked awesome with sdr radio and dsd plus , I thought id give it a try with gnu radio and op25, what im finding is my linux skills are-um kinda lousy -------------------------------------------- On Sun, 1/31/16, russ.innes(a)gmail.com [op25-dev] <op25-dev(a)yahoogroups.com> wrote: Subject: [op25-dev] Re: op25 To: op25-dev(a)yahoogroups.com Received: Sunday, January 31, 2016, 3:35 PM ~/pybombs/src/gr-op25/op25/gr-op25_repeater/apps/ run scope.py (./scope.py) You will have to pass arguments - what are you using for a receiver?

2 1

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

op25-dev February 2016