laforge has submitted this change. ( https://gerrit.osmocom.org/c/pysim/+/40094?usp=email )
Change subject: personalization: set example input values ......................................................................
personalization: set example input values
For all ConfigurableParameter subclasses, provide an example_input.
This may be useful for downstream projects' user interaction, to suggest a value or prefill an input field, as appropriate.
Related: SYS#6768 Change-Id: I2672fedcbc32cb7a6cb0c233a4a22112bd9aae03 --- M pySim/esim/saip/personalization.py 1 file changed, 17 insertions(+), 2 deletions(-)
Approvals: laforge: Looks good to me, approved Jenkins Builder: Verified
diff --git a/pySim/esim/saip/personalization.py b/pySim/esim/saip/personalization.py index 943784f..54aaa43 100644 --- a/pySim/esim/saip/personalization.py +++ b/pySim/esim/saip/personalization.py @@ -115,6 +115,7 @@ min_len = None max_len = None allow_len = None # a list of specific lengths + example_input = None
def __init__(self, input_value=None): self.input_value = input_value # the raw input value as given by caller @@ -306,6 +307,7 @@ name = 'ICCID' min_len = 18 max_len = 20 + example_input = '998877665544332211'
@classmethod def validate_val(cls, val): @@ -326,6 +328,7 @@ name = 'IMSI' min_len = 6 max_len = 15 + example_input = '00101' + ('0' * 10)
@classmethod def apply_val(cls, pes: ProfileElementSequence, val): @@ -497,6 +500,7 @@ allow_len = 8 rpad = 16 keyReference = None + example_input = '0' * allow_len
@classmethod def apply_val(cls, pes: ProfileElementSequence, val): @@ -523,6 +527,7 @@ rpad = 16 min_len = 4 max_len = 8 + example_input = '0' * max_len keyReference = None
@staticmethod @@ -546,9 +551,10 @@
class Pin1(Pin): name = 'PIN1' + example_input = '0' * 4 # PIN are usually 4 digits keyReference = 0x01
-class Pin2(Pin): +class Pin2(Pin1): name = 'PIN2' keyReference = 0x81
@@ -568,7 +574,7 @@ name = 'ADM1' keyReference = 0x0A
-class Adm2(Pin): +class Adm2(Adm1): name = 'ADM2' keyReference = 0x0B
@@ -591,6 +597,7 @@ class AlgorithmID(DecimalParam, AlgoConfig): algo_config_key = 'algorithmID' allow_len = 1 + example_input = 1 # Milenage
@classmethod def validate_val(cls, val): @@ -606,6 +613,7 @@ name = 'K' algo_config_key = 'key' allow_len = (128 // 8, 256 // 8) # length in bytes (from BinaryParam); TUAK also allows 256 bit + example_input = '00' * allow_len[0]
class Opc(K): name = 'OPc' @@ -618,6 +626,7 @@ name = 'MilenageRotation' algo_config_key = 'rotationConstants' allow_len = 5 # length in bytes (from BinaryParam) + example_input = '0a 0b 0c 0d 0e'
@classmethod def validate_val(cls, val): @@ -641,6 +650,11 @@ name = 'MilenageXOR' algo_config_key = 'xoringConstants' allow_len = 80 # length in bytes (from BinaryParam) + example_input = ('00000000000000000000000000000000' + ' 00000000000000000000000000000001' + ' 00000000000000000000000000000002' + ' 00000000000000000000000000000004' + ' 00000000000000000000000000000008')
class TuakNumberOfKeccak(IntegerParam, AlgoConfig): """Number of iterations of Keccak-f[1600] permutation as recomended by Section 7.2 of 3GPP TS 35.231""" @@ -648,3 +662,4 @@ algo_config_key = 'numberOfKeccak' min_val = 1 max_val = 255 + example_input = '1'
-
laforge