pespin has submitted this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/29909 )
Change subject: cosmetic: pcu: Fix typo in several comments ......................................................................
cosmetic: pcu: Fix typo in several comments
Change-Id: I7a2419514582cb9efd8df126bf449711f78586fe --- M pcu/PCU_Tests.ttcn 1 file changed, 14 insertions(+), 14 deletions(-)
Approvals: Jenkins Builder: Verified osmith: Looks good to me, approved
diff --git a/pcu/PCU_Tests.ttcn b/pcu/PCU_Tests.ttcn index 8b3d1ea..6d17d96 100644 --- a/pcu/PCU_Tests.ttcn +++ b/pcu/PCU_Tests.ttcn @@ -430,7 +430,7 @@ f_ms_establish_ul_tbf(ms);
/* Send one UL block (with TLLI since we are in One-Phase Access - contention resoultion) and make sure it is ACKED fine */ + contention resolution) and make sure it is ACKED fine */ f_ms_tx_ul_data_block_multi(ms, 1, with_tlli := true, fn := ms.ul_tbf.start_time_fn); f_rx_rlcmac_dl_block_exp_ack_nack(dl_block, sched_fn); /* DL ACK/NACK sets poll+rrbp requesting PACKET CONTROL ACK */ @@ -538,7 +538,7 @@ /* Simulate a delay > 0 */ ms.ta := 2;
- /* We're in One-Phase Access contention resoultion, include TLLI */ + /* We're in One-Phase Access contention resolution, include TLLI */ f_ms_tx_ul_data_block_multi(ms, 1, with_tlli := true, fn := ms.ul_tbf.start_time_fn); f_rx_rlcmac_dl_block_exp_ack_nack(dl_block, sched_fn);
@@ -832,7 +832,7 @@ ms.lqual_cb := 0;
/* Send one UL block (with TLLI since we are in One-Phase Access - contention resoultion) and make sure it is ACKED fine. */ + contention resolution) and make sure it is ACKED fine. */ /* 16 bytes fills the llc block (because TLLI takes 4 bytes) */ /* Set CV = 15 to signal there's still more than BS_CV_MAX blocks to be sent */ f_ms_tx_ul_data_block(ms, f_rnd_octstring(16), cv := 15, with_tlli := true, fn := ms.ul_tbf.start_time_fn) @@ -916,7 +916,7 @@ f_ms_establish_ul_tbf(ms);
/* Send one UL block (with TLLI since we are in One-Phase Access - contention resoultion) and make sure it is ACKED fine. */ + contention resolution) and make sure it is ACKED fine. */ /* 16 bytes fills the llc block (because TLLI takes 4 bytes) */ /* Set CV = 15 to signal there's still more than BS_CV_MAX blocks to be sent */ f_ms_tx_ul_data_block(ms, f_rnd_octstring(16), cv := 15, with_tlli := true, fn := ms.ul_tbf.start_time_fn) @@ -988,7 +988,7 @@ f_ms_establish_ul_tbf(ms);
/* Send one UL block (with TLLI since we are in One-Phase Access - contention resoultion) and make sure it is ACKED fine. */ + contention resolution) and make sure it is ACKED fine. */ /* 16 bytes fills the llc block (because TLLI takes 4 bytes) */ /* Set CV = 15 to signal there's still more than BS_CV_MAX blocks to be sent */ f_ms_tx_ul_data_block(ms, f_rnd_octstring(16), cv := 15, with_tlli := true, fn := ms.ul_tbf.start_time_fn) @@ -2152,7 +2152,7 @@ f_ms_establish_ul_tbf(ms);
/* Send one UL block (with TLLI since we are in One-Phase Access - contention resoultion) and make sure it is ACKED fine. */ + contention resolution) and make sure it is ACKED fine. */ total_payload := f_rnd_octstring(f_ultbf_payload_fill_length(ms.ul_tbf, true)); /* Set CV = 15 to signal there's still more than BS_CV_MAX blocks to be sent */ f_ms_tx_ul_data_block(ms, total_payload, cv := 15, with_tlli := true, fn := ms.ul_tbf.start_time_fn) @@ -2203,7 +2203,7 @@ f_ms_establish_ul_tbf(ms);
/* Send one UL block (with TLLI since we are in One-Phase Access - contention resoultion) and make sure it is ACKED fine. */ + contention resolution) and make sure it is ACKED fine. */ payload := f_rnd_octstring(16); /* 16 bytes fills the llc block (because TLLI takes 4 bytes) */ blk_hdr := t_RLCMAC_LLCBLOCK_HDR(length_ind := lengthof(payload), more := false, e := true); @@ -2285,7 +2285,7 @@
block_len := f_rlcmac_cs_mcs2block_len(cs); /* We need to send with TLLI since we are in One-Phase Access Contenion - * resoultion), so that's -4 bytes of data, -3 for headers, -1 for LI + * resolution), so that's -4 bytes of data, -3 for headers, -1 for LI * indicator, -1 for spare bits octet at the end */ max_valid_data_len := block_len - 4 - 3 - 1 - 1; payload := f_rnd_octstring(max_valid_data_len + 1); /* +1 to write LLC data on last padding octet */ @@ -2371,7 +2371,7 @@ f_ms_establish_ul_tbf(ms);
/* Send one UL block (with TLLI since we are in One-Phase Access - contention resoultion) and make sure it is ACKED fine */ + contention resolution) and make sure it is ACKED fine */ f_ms_tx_ul_data_block_multi(ms, 1, with_tlli := true, fn := ms.ul_tbf.start_time_fn); f_rx_rlcmac_dl_block_exp_ack_nack(dl_block, sched_fn); /* DL ACK/NACK sets poll+rrbp requesting PACKET CONTROL ACK */ @@ -2581,7 +2581,7 @@ f_ms_rx_pkt_ass_pacch(ms, sched_fn, tr_RLCMAC_UL_PACKET_ASS);
/* Send one UL block (with TLLI since we are in One-Phase Access - contention resoultion) and make sure it is ACKED fine */ + contention resolution) and make sure it is ACKED fine */ f_ms_tx_ul_data_block_multi(ms, 1, with_tlli := true); f_rx_rlcmac_dl_block_exp_ack_nack(dl_block, sched_fn); /* DL ACK/NACK sets poll+rrbp requesting PACKET CONTROL ACK */ @@ -2639,7 +2639,7 @@ tfi := ms.ul_tbf.tfi;
/* Send one UL block (with TLLI since we are in One-Phase Access - contention resoultion) and make sure it is ACKED fine. */ + contention resolution) and make sure it is ACKED fine. */ payload := f_rnd_octstring(f_ultbf_payload_fill_length(ms.ul_tbf, true)); /* 16 bytes fills the llc block (because TLLI takes 4 bytes) */ f_ms_tx_ul_data_block(ms, payload, cv := 15, with_tlli := true, fn := ms.ul_tbf.start_time_fn);
@@ -3154,7 +3154,7 @@ f_ms_establish_ul_tbf(ms);
/* Send one UL block (with TLLI since we are in One-Phase Access - contention resoultion) and make sure it is ACKED fine */ + contention resolution) and make sure it is ACKED fine */ f_ms_tx_ul_data_block(ms, data, with_tlli := true, fn := ms.ul_tbf.start_time_fn, nr := f_ms_tx_TsTrxBtsNum(ms)); /* DL ACK/NACK sets poll+rrbp requesting PACKET CONTROL ACK */ @@ -3299,7 +3299,7 @@ f_ms_establish_ul_tbf(ms);
/* Send one UL block (with TLLI since we are in One-Phase Access - contention resoultion) and make sure it is ACKED fine */ + contention resolution) and make sure it is ACKED fine */ f_ms_tx_ul_data_block_multi(ms, 1, with_tlli := true, fn := ms.ul_tbf.start_time_fn);
/* UL block should be received in SGSN */ @@ -3386,7 +3386,7 @@ f_ms_establish_ul_tbf(ms);
/* Send one UL block (with TLLI since we are in One-Phase Access - contention resoultion) and make sure it is ACKED fine */ + contention resolution) and make sure it is ACKED fine */ f_ms_tx_ul_data_block_multi(ms, 1, with_tlli := true, fn := ms.ul_tbf.start_time_fn);
/* UL block should be received in SGSN */
-
pespin