Attention is currently required from: pespin. neels has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-mgw/+/35176?usp=email ) Change subject: mgcp_network: Allow rx of IuUP in loopback mode with set rem IP address and unset rem port ...................................................................... Patch Set 2: (2 comments) File src/libosmo-mgcp/mgcp_network.c: https://gerrit.osmocom.org/c/osmo-mgw/+/35176/comment/036f8de3_d0de7ad6 PS2, Line 866: HACK: for IuUP, we want to reply with an IuUP Initialization ACK upon the first RTP : * messag This code was only active in LOOPBACK mode; since patch [1] we no longer send CRCX in LOOPBACK from osmo-msc, as we used to do for the IuUP hack. So this code is definitely not needed for IuUP init. Also the hack itself no longer exists in osmo-mgw, since your patch [2] =) Now, instead, we have proper IuUP protocol support in osmo-mgw. But you may be right about needing to allow IuUP Init to pass thru here. In rx_rtp(), we first do check_rtp_origin(), and then forward RTP to mgcp_iuup.c via dispatch_rtp_cb() ... I just ran a test on a nano3G and indeed the Initialization gets no ACK. I'll post this for now and test a bit further. Does our test suite lack some important tests...? [1] osmo-msc a8181539671f79016c968d25bb214c784ecbdc3c [2] osmo-mgw bb3ccdea1ac4d9467b2701328d6f10c4c1c8fa9a https://gerrit.osmocom.org/c/osmo-mgw/+/35176/comment/05587916_43d7a09f PS2, Line 876: return 0; it's like this, right? Before this patch, line 913 below disallows rx of any RTP when the MGCP configured port == 0. This new condition punches a hole in that rejection; but only when in LOOPBACK mode. osmo-msc does not use LOOPBACK mode anymore since march this year. Still this patch can be relevant for using an osmo-msc older than that... -- To view, visit https://gerrit.osmocom.org/c/osmo-mgw/+/35176?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-mgw Gerrit-Branch: master Gerrit-Change-Id: Idd833997abce46886e9664505b2776fa5dadc8db Gerrit-Change-Number: 35176 Gerrit-PatchSet: 2 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: neels <nhofmeyr(a)sysmocom.de> Gerrit-Attention: pespin <pespin(a)sysmocom.de> Gerrit-Comment-Date: Mon, 04 Dec 2023 00:45:12 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Comment-In-Reply-To: neels <nhofmeyr(a)sysmocom.de> Comment-In-Reply-To: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: comment