laforge has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-gsm-manuals/+/32003 ) Change subject: chapters/mncc: Update the wording to be less confusing and more up-to-date ...................................................................... chapters/mncc: Update the wording to be less confusing and more up-to-date Change-Id: Ic8876509878e565f140508dc2e3494b0e21c566c --- M common/chapters/mncc.adoc 1 file changed, 14 insertions(+), 4 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-gsm-manuals refs/changes/03/32003/1 diff --git a/common/chapters/mncc.adoc b/common/chapters/mncc.adoc index 3c67998..e56afeb 100644 --- a/common/chapters/mncc.adoc +++ b/common/chapters/mncc.adoc @@ -56,10 +56,11 @@ to disable the internal MNCC handler and specify the MNCC socket path in the configuration file. -At the time of this writing, the only external application implementing the -MNCC interface compatible with the Osmocom MNCC socket is `lcr`, the Linux Call -Router. More widespread integration of external call routing is available via -the OsmoSIPConnector. +At the time of this writing, there are only two known open source application implementing the +MNCC interface compatible with the Osmocom MNCC socket: + +* historically `lcr`, the Linux Call Router (support for modern MNCC protocol versions may be missing) +* `osmo-sip-connector`, the more up-to-date integration of external call routing by translating MNCC into a SIP trunk towards an external SIP PBX / switch. === DTMF considerations -- To view, visit https://gerrit.osmocom.org/c/osmo-gsm-manuals/+/32003 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-gsm-manuals Gerrit-Branch: master Gerrit-Change-Id: Ic8876509878e565f140508dc2e3494b0e21c566c Gerrit-Change-Number: 32003 Gerrit-PatchSet: 1 Gerrit-Owner: laforge <laforge(a)osmocom.org> Gerrit-MessageType: newchange