neels has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-bsc/+/31626 ) Change subject: add timeslot.vty ...................................................................... add timeslot.vty Prepare some basic tests for 'timeslot' / 'phys_chan_config', because an upcoming patch will add the 'osmodyn' alias, and this test shall show the changes on the VTY. Change-Id: I2c4aab90bcbc9019ca004fb1d4945476edbb7363 --- A tests/timeslot.vty 1 file changed, 84 insertions(+), 0 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-bsc refs/changes/26/31626/1 diff --git a/tests/timeslot.vty b/tests/timeslot.vty new file mode 100644 index 0000000..0a2f01c --- /dev/null +++ b/tests/timeslot.vty @@ -0,0 +1,71 @@ +OsmoBSC> enable +OsmoBSC# configure terminal +OsmoBSC(config)# network +OsmoBSC(config-net)# bts 0 +OsmoBSC(config-net-bts)# trx 0 +OsmoBSC(config-net-bts-trx)# timeslot 0 + +OsmoBSC(config-net-bts-trx-ts)# list +... + phys_chan_config (none|ccch|ccch+sdcch4|tch/f|tch/h|sdcch8|pdch|tch/f_pdch|unknown|ccch+sdcch4+cbch|sdcch8+cbch|tch/f_tch/h_sdcch8_pdch) + training_sequence_code <0-7> + hopping enabled (0|1) + hopping sequence-number <0-63> + hopping maio <0-63> + hopping arfcn add <0-1023> + hopping arfcn del <0-1023> + hopping arfcn del-all + e1 line E1_LINE timeslot <1-31> sub-slot (0|1|2|3|full) + +OsmoBSC(config-net-bts-trx-ts)# phys_chan_config? + phys_chan_config Physical Channel Combination + +OsmoBSC(config-net-bts-trx-ts)# phys_chan_config ? + none Physical Channel not configured + ccch FCCH + SCH + BCCH + CCCH (Comb. IV) + ccch+sdcch4 FCCH + SCH + BCCH + CCCH + 4 SDCCH + 2 SACCH (Comb. V) + tch/f TCH/F + FACCH/F + SACCH (Comb. I) + tch/h 2 TCH/H + 2 FACCH/H + 2 SACCH (Comb. II) + sdcch8 8 SDCCH + 4 SACCH (Comb. VII) + pdch Packet Data Channel for GPRS/EDGE + tch/f_pdch Dynamic TCH/F or GPRS PDCH + unknown Unknown / Unsupported channel combination + ccch+sdcch4+cbch FCCH + SCH + BCCH + CCCH + CBCH + 3 SDCCH + 2 SACCH (Comb. V) + sdcch8+cbch 7 SDCCH + 4 SACCH + CBCH (Comb. VII) + tch/f_tch/h_sdcch8_pdch Dynamic TCH/F or TCH/H or SDCCH/8 or GPRS PDCH + +OsmoBSC(config-net-bts-trx-ts)# phys_chan_config none +OsmoBSC(config-net-bts-trx-ts)# show running-config +... + trx 0 +... + timeslot 0 + hopping enabled 0 +... + +OsmoBSC(config-net-bts-trx-ts)# phys_chan_config tch/f +OsmoBSC(config-net-bts-trx-ts)# show running-config +... + trx 0 +... + timeslot 0 + phys_chan_config TCH/F +... + +OsmoBSC(config-net-bts-trx-ts)# phys_chan_config TCH/F +OsmoBSC(config-net-bts-trx-ts)# show running-config +... + trx 0 +... + timeslot 0 + phys_chan_config TCH/F +... + +OsmoBSC(config-net-bts-trx-ts)# phys_chan_config tch/f_tch/h_sdcch8_pdch +OsmoBSC(config-net-bts-trx-ts)# show running-config +... + trx 0 +... + timeslot 0 + phys_chan_config TCH/F_TCH/H_SDCCH8_PDCH +... -- To view, visit https://gerrit.osmocom.org/c/osmo-bsc/+/31626 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-bsc Gerrit-Branch: master Gerrit-Change-Id: I2c4aab90bcbc9019ca004fb1d4945476edbb7363 Gerrit-Change-Number: 31626 Gerrit-PatchSet: 1 Gerrit-Owner: neels &lt;nhofmeyr(a)sysmocom.de&gt; Gerrit-MessageType: newchange