Attention is currently required from: fixeria.
pespin has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-pcu/+/28423 )
Change subject: encoding: fix an uninitialized field in gen_freq_params()
......................................................................
Patch Set 2: Code-Review+2
--
To view, visit https://gerrit.osmocom.org/c/osmo-pcu/+/28423
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-pcu
Gerrit-Branch: master
Gerrit-Change-Id: I4dd5202d1c4bd75baf0ab4f88ffefcc47272bd9c
Gerrit-Change-Number: 28423
Gerrit-PatchSet: 2
Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Comment-Date: Wed, 29 Jun 2022 11:46:33 +0000
Gerrit-HasComments: No
Gerrit-Has-Labels: Yes
Gerrit-MessageType: comment
pespin has submitted this change. ( https://gerrit.osmocom.org/c/osmo-e1d/+/28466 )
Change subject: Bump version: 0.3.0.72-bb13-dirty → 0.4.0
......................................................................
Bump version: 0.3.0.72-bb13-dirty → 0.4.0
Change-Id: Ia3b429acd866ab644a9d9a848d69bd9627dcd840
---
M configure.ac
M debian/changelog
M debian/control
M src/Makefile.am
4 files changed, 90 insertions(+), 6 deletions(-)
Approvals:
Jenkins Builder: Verified
pespin: Looks good to me, approved
diff --git a/configure.ac b/configure.ac
index 182d914..f671591 100644
--- a/configure.ac
+++ b/configure.ac
@@ -35,9 +35,9 @@
PKG_CHECK_MODULES(TALLOC, [talloc >= 2.0.1])
-PKG_CHECK_MODULES(LIBOSMOCORE, libosmocore >= 1.6.0)
-PKG_CHECK_MODULES(LIBOSMOVTY, libosmovty >= 1.6.0)
-PKG_CHECK_MODULES(LIBOSMOUSB, libosmousb >= 1.6.0)
+PKG_CHECK_MODULES(LIBOSMOCORE, libosmocore >= 1.7.0)
+PKG_CHECK_MODULES(LIBOSMOVTY, libosmovty >= 1.7.0)
+PKG_CHECK_MODULES(LIBOSMOUSB, libosmousb >= 1.7.0)
PKG_CHECK_MODULES(LIBUSB, libusb-1.0 >= 1.0.21)
AC_CONFIG_MACRO_DIR([m4])
diff --git a/debian/changelog b/debian/changelog
index 3b3e20f..78a61df 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,3 +1,87 @@
+osmo-e1d (0.4.0) unstable; urgency=medium
+
+ [ Harald Welte ]
+ * Use the error counters for remote alarm + remote CRC error
+ * Add support for icE1usb RAI interrupt error flag
+ * cosmetic: Adhere osmocom coding style in for-loops
+ * usb: Print failed USB isochronous packets
+ * usb: Use libusb_status_str when logging INT EP error
+ * make rate_counters work
+ * update copyright statement
+ * e1_{intf,line}_new: Allow caller to specify the numeric identifier
+ * Allow configuration of interfaces/lines via VTY
+ * GPS-DO support for icE1usb hardware
+ * Proper libusb error reporting in all error paths
+ * usb: rename 'size' to 'len' in callback functions
+ * e1d.h: add #pragma once
+ * cosmetic: Remove extra empty newlines from end of intf_line.c
+ * intf_line.c: Make e1d_find_intf_by_usb_serial safe for empty string
+ * cosmetic: curly braces around multi-line blocks
+ * intf_line: Ensure unique rate counter group indexes
+ * mux_demux.c: Use %zu for size_t
+ * vty.c: Fix re-reading of config file after 'write file'
+ * OCTOI: initial support for E1oIP forwarding
+ * add example config files for octoi-server and octoi-client
+ * RIFO (random in, first out) for IP->E1 direction
+ * fix segfault on 'show octoi-server' if no server configured
+ * vty: Print only applicable information during 'show line'
+ * OCTOI: re-implement LINE_STAT_E1oIP_E1T_FIFO
+ * octo: give rate_ctr / stat_items meaningful identifiers
+ * Make use of libosmcoore cpu_sched_vty
+ * Set rate_ctr_group name for each line
+ * Fix stats exporter
+ * octoi: Update RIFO depth also on dequeue
+ * Add rate counters for number of frames muxed/demuxed (E1 side)
+ * octoi: Add new rate-counter for out-of-order packets
+ * e1d: stat_items for the GPS-DO related bits
+ * octoi: Reset FIFO/RIFO when entering ACCEPTED state
+ * octoi: Disconnect the link when >= 7500 underruns/s
+ * rifo_test: print rifo_depth + rifo_frames on every IN/OUT
+ * octoi: differentiate UNDERRUN from SUBSTITUTED in counters
+ * e1oip: Rename e1oip:overflow to e1oip:e1o_overflow
+ * e1oip: Add rate_ctr for IP->E1 RIFO overflows
+ * octoi: Terminate connection on too high RIFO OVERFLOW rates
+ * octoi: Fix client re-start after clock drift disconnect
+ * octoi: add new counter every time a connection is accepted
+ * e1oip: Add stat items for number of timeslots
+ * cosmetic: remove dead code {fifo,rifo}_dump() functions
+ * octoi: Support setting IP DSCP and socket priority via VTY
+ * e1oip: fix line counter descriptions
+ * e1oip: Add rate_ctr for rx + tx packet / byte count
+ * octoi: only memcpy() if it is present in _octoi_tx_echo()
+ * octoi: Send ECHO_REQ every 10s and update the related stat_item
+ * e1oip: introduce #defines for BATCHING_FACTOR / PREFILL_COUNT
+ * e1oip: Make batching-factor and prefill-frame-count configurable
+ * update git URLs (git -> https; gitea)
+ * README.md: Fix syntax for hyperlinks
+
+ [ Sylvain Munaut ]
+ * e1d/usb: Limit feedback EP transfer size to 3
+ * e1d/usb: Use wMaxPacketSize to know maximum number of frames to send
+ * build: Increase warnings
+ * Fix a bunch of warning raised by the new build warning options
+ * usb: Add warning for error during interrupt transfers
+ * mux_demux: Shuffle functions around for consistency
+ * mux_demux: In RAW mode, fill with dummy until first TX
+ * contrib/e1-prbs-test: Delay the TX pipe fill data until first RX
+ * RIFO: Minor typo/comment fixes
+ * RIFO: Fix operator precedence issue in the math for bucket_for_fn
+ * RIFO: Fix issue in frame number bounds checking
+ * RIFO: Add a test for bounds checking
+ * OCTOI: Fix the extension of 16b FN from packet to full 32b FN
+ * octoi: Simple RX priming / pre-filling
+ * rifo_test: Use a helper function for the rifo init
+ * octoi: Fix frame_rifo_depth() function
+
+ [ Oliver Smith ]
+ * checkpatch.conf: new file
+
+ [ Tobias Mädel ]
+ * RIFO: fix frame_rifo_in check on frame number wrap-around
+ * RIFO: add more thorough tests and a vetted test.ok file
+
+ -- Pau Espin Pedrol <pespin(a)sysmocom.de> Wed, 29 Jun 2022 12:09:54 +0200
+
osmo-e1d (0.3.0) unstable; urgency=medium
* e1d: reliably detect EOF in _e1_ts_{read,write} (RAW mode)
diff --git a/debian/control b/debian/control
index bb6cf8f..58a6d88 100644
--- a/debian/control
+++ b/debian/control
@@ -10,9 +10,9 @@
libtool,
pkg-config,
python3-minimal,
- libosmocore-dev (>= 1.6.0),
+ libosmocore-dev (>= 1.7.0),
libusb-1.0-0-dev,
- osmo-gsm-manuals-dev (>= 1.2.0)
+ osmo-gsm-manuals-dev (>= 1.3.0)
Standards-Version: 3.9.8
Vcs-Git: https://gitea.osmocom.org/retronetworking/osmo-e1d
Vcs-Browser: https://gitea.osmocom.org/retronetworking/osmo-e1d
diff --git a/src/Makefile.am b/src/Makefile.am
index 5795598..2cc8a8f 100644
--- a/src/Makefile.am
+++ b/src/Makefile.am
@@ -3,7 +3,7 @@
# This is _NOT_ the library release version, it's an API version.
# Please read Chapter 6 "Library interface versions" of the libtool
# documentation before making any modification
-LIBVERSION=1:0:0
+LIBVERSION=2:0:1
AM_CPPFLAGS = $(all_includes) -I$(top_srcdir)/include -I$(top_builddir)
AM_CFLAGS=-Wall -Wextra -Wno-missing-field-initializers -Wno-unused-parameter -Wno-unused-result $(LIBOSMOCORE_CFLAGS) \
--
To view, visit https://gerrit.osmocom.org/c/osmo-e1d/+/28466
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-e1d
Gerrit-Branch: master
Gerrit-Change-Id: Ia3b429acd866ab644a9d9a848d69bd9627dcd840
Gerrit-Change-Number: 28466
Gerrit-PatchSet: 1
Gerrit-Owner: pespin <pespin(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: pespin <pespin(a)sysmocom.de>
Gerrit-MessageType: merged
pespin has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-e1d/+/28466 )
Change subject: Bump version: 0.3.0.72-bb13-dirty → 0.4.0
......................................................................
Bump version: 0.3.0.72-bb13-dirty → 0.4.0
Change-Id: Ia3b429acd866ab644a9d9a848d69bd9627dcd840
---
M configure.ac
M debian/changelog
M debian/control
M src/Makefile.am
4 files changed, 90 insertions(+), 6 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-e1d refs/changes/66/28466/1
diff --git a/configure.ac b/configure.ac
index 182d914..f671591 100644
--- a/configure.ac
+++ b/configure.ac
@@ -35,9 +35,9 @@
PKG_CHECK_MODULES(TALLOC, [talloc >= 2.0.1])
-PKG_CHECK_MODULES(LIBOSMOCORE, libosmocore >= 1.6.0)
-PKG_CHECK_MODULES(LIBOSMOVTY, libosmovty >= 1.6.0)
-PKG_CHECK_MODULES(LIBOSMOUSB, libosmousb >= 1.6.0)
+PKG_CHECK_MODULES(LIBOSMOCORE, libosmocore >= 1.7.0)
+PKG_CHECK_MODULES(LIBOSMOVTY, libosmovty >= 1.7.0)
+PKG_CHECK_MODULES(LIBOSMOUSB, libosmousb >= 1.7.0)
PKG_CHECK_MODULES(LIBUSB, libusb-1.0 >= 1.0.21)
AC_CONFIG_MACRO_DIR([m4])
diff --git a/debian/changelog b/debian/changelog
index 3b3e20f..78a61df 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,3 +1,87 @@
+osmo-e1d (0.4.0) unstable; urgency=medium
+
+ [ Harald Welte ]
+ * Use the error counters for remote alarm + remote CRC error
+ * Add support for icE1usb RAI interrupt error flag
+ * cosmetic: Adhere osmocom coding style in for-loops
+ * usb: Print failed USB isochronous packets
+ * usb: Use libusb_status_str when logging INT EP error
+ * make rate_counters work
+ * update copyright statement
+ * e1_{intf,line}_new: Allow caller to specify the numeric identifier
+ * Allow configuration of interfaces/lines via VTY
+ * GPS-DO support for icE1usb hardware
+ * Proper libusb error reporting in all error paths
+ * usb: rename 'size' to 'len' in callback functions
+ * e1d.h: add #pragma once
+ * cosmetic: Remove extra empty newlines from end of intf_line.c
+ * intf_line.c: Make e1d_find_intf_by_usb_serial safe for empty string
+ * cosmetic: curly braces around multi-line blocks
+ * intf_line: Ensure unique rate counter group indexes
+ * mux_demux.c: Use %zu for size_t
+ * vty.c: Fix re-reading of config file after 'write file'
+ * OCTOI: initial support for E1oIP forwarding
+ * add example config files for octoi-server and octoi-client
+ * RIFO (random in, first out) for IP->E1 direction
+ * fix segfault on 'show octoi-server' if no server configured
+ * vty: Print only applicable information during 'show line'
+ * OCTOI: re-implement LINE_STAT_E1oIP_E1T_FIFO
+ * octo: give rate_ctr / stat_items meaningful identifiers
+ * Make use of libosmcoore cpu_sched_vty
+ * Set rate_ctr_group name for each line
+ * Fix stats exporter
+ * octoi: Update RIFO depth also on dequeue
+ * Add rate counters for number of frames muxed/demuxed (E1 side)
+ * octoi: Add new rate-counter for out-of-order packets
+ * e1d: stat_items for the GPS-DO related bits
+ * octoi: Reset FIFO/RIFO when entering ACCEPTED state
+ * octoi: Disconnect the link when >= 7500 underruns/s
+ * rifo_test: print rifo_depth + rifo_frames on every IN/OUT
+ * octoi: differentiate UNDERRUN from SUBSTITUTED in counters
+ * e1oip: Rename e1oip:overflow to e1oip:e1o_overflow
+ * e1oip: Add rate_ctr for IP->E1 RIFO overflows
+ * octoi: Terminate connection on too high RIFO OVERFLOW rates
+ * octoi: Fix client re-start after clock drift disconnect
+ * octoi: add new counter every time a connection is accepted
+ * e1oip: Add stat items for number of timeslots
+ * cosmetic: remove dead code {fifo,rifo}_dump() functions
+ * octoi: Support setting IP DSCP and socket priority via VTY
+ * e1oip: fix line counter descriptions
+ * e1oip: Add rate_ctr for rx + tx packet / byte count
+ * octoi: only memcpy() if it is present in _octoi_tx_echo()
+ * octoi: Send ECHO_REQ every 10s and update the related stat_item
+ * e1oip: introduce #defines for BATCHING_FACTOR / PREFILL_COUNT
+ * e1oip: Make batching-factor and prefill-frame-count configurable
+ * update git URLs (git -> https; gitea)
+ * README.md: Fix syntax for hyperlinks
+
+ [ Sylvain Munaut ]
+ * e1d/usb: Limit feedback EP transfer size to 3
+ * e1d/usb: Use wMaxPacketSize to know maximum number of frames to send
+ * build: Increase warnings
+ * Fix a bunch of warning raised by the new build warning options
+ * usb: Add warning for error during interrupt transfers
+ * mux_demux: Shuffle functions around for consistency
+ * mux_demux: In RAW mode, fill with dummy until first TX
+ * contrib/e1-prbs-test: Delay the TX pipe fill data until first RX
+ * RIFO: Minor typo/comment fixes
+ * RIFO: Fix operator precedence issue in the math for bucket_for_fn
+ * RIFO: Fix issue in frame number bounds checking
+ * RIFO: Add a test for bounds checking
+ * OCTOI: Fix the extension of 16b FN from packet to full 32b FN
+ * octoi: Simple RX priming / pre-filling
+ * rifo_test: Use a helper function for the rifo init
+ * octoi: Fix frame_rifo_depth() function
+
+ [ Oliver Smith ]
+ * checkpatch.conf: new file
+
+ [ Tobias Mädel ]
+ * RIFO: fix frame_rifo_in check on frame number wrap-around
+ * RIFO: add more thorough tests and a vetted test.ok file
+
+ -- Pau Espin Pedrol <pespin(a)sysmocom.de> Wed, 29 Jun 2022 12:09:54 +0200
+
osmo-e1d (0.3.0) unstable; urgency=medium
* e1d: reliably detect EOF in _e1_ts_{read,write} (RAW mode)
diff --git a/debian/control b/debian/control
index bb6cf8f..58a6d88 100644
--- a/debian/control
+++ b/debian/control
@@ -10,9 +10,9 @@
libtool,
pkg-config,
python3-minimal,
- libosmocore-dev (>= 1.6.0),
+ libosmocore-dev (>= 1.7.0),
libusb-1.0-0-dev,
- osmo-gsm-manuals-dev (>= 1.2.0)
+ osmo-gsm-manuals-dev (>= 1.3.0)
Standards-Version: 3.9.8
Vcs-Git: https://gitea.osmocom.org/retronetworking/osmo-e1d
Vcs-Browser: https://gitea.osmocom.org/retronetworking/osmo-e1d
diff --git a/src/Makefile.am b/src/Makefile.am
index 5795598..2cc8a8f 100644
--- a/src/Makefile.am
+++ b/src/Makefile.am
@@ -3,7 +3,7 @@
# This is _NOT_ the library release version, it's an API version.
# Please read Chapter 6 "Library interface versions" of the libtool
# documentation before making any modification
-LIBVERSION=1:0:0
+LIBVERSION=2:0:1
AM_CPPFLAGS = $(all_includes) -I$(top_srcdir)/include -I$(top_builddir)
AM_CFLAGS=-Wall -Wextra -Wno-missing-field-initializers -Wno-unused-parameter -Wno-unused-result $(LIBOSMOCORE_CFLAGS) \
--
To view, visit https://gerrit.osmocom.org/c/osmo-e1d/+/28466
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-e1d
Gerrit-Branch: master
Gerrit-Change-Id: Ia3b429acd866ab644a9d9a848d69bd9627dcd840
Gerrit-Change-Number: 28466
Gerrit-PatchSet: 1
Gerrit-Owner: pespin <pespin(a)sysmocom.de>
Gerrit-MessageType: newchange
osmith has uploaded this change for review. ( https://gerrit.osmocom.org/c/docker-playground/+/28461 )
Change subject: release-tarball-build-dist: upgrade from debian 9
......................................................................
release-tarball-build-dist: upgrade from debian 9
Let it use debian bullseye and rename the directory once, so we don't
need to rename it in the future when switching the debian version
again.
The reason I'm doing this now is that building with debian 9 failed
due to obs.osmocom.org related changes. It would be trivial to fix that,
but I decided to rather upgrade to the latest debian version.
Change-Id: Ib6039724a7200abce5252f95407047296b72cd51
---
R release-tarball-build-dist/Dockerfile
R release-tarball-build-dist/Makefile
2 files changed, 1 insertion(+), 3 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/docker-playground refs/changes/61/28461/1
diff --git a/debian-stretch-build-dist/Dockerfile b/release-tarball-build-dist/Dockerfile
similarity index 94%
rename from debian-stretch-build-dist/Dockerfile
rename to release-tarball-build-dist/Dockerfile
index e444ed5..bc0215e 100644
--- a/debian-stretch-build-dist/Dockerfile
+++ b/release-tarball-build-dist/Dockerfile
@@ -1,5 +1,5 @@
ARG USER
-FROM $USER/debian-stretch-obs-latest
+FROM $USER/debian-bullseye-obs-latest
# Arguments used after FROM must be specified again
RUN apt-get update && \
@@ -66,8 +66,6 @@
libzmq3-dev \
make \
mscgen \
- python-nwdiag \
- python-pychart \
python3-nwdiag \
xsltproc \
&& \
diff --git a/debian-stretch-build-dist/Makefile b/release-tarball-build-dist/Makefile
similarity index 100%
rename from debian-stretch-build-dist/Makefile
rename to release-tarball-build-dist/Makefile
--
To view, visit https://gerrit.osmocom.org/c/docker-playground/+/28461
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: docker-playground
Gerrit-Branch: master
Gerrit-Change-Id: Ib6039724a7200abce5252f95407047296b72cd51
Gerrit-Change-Number: 28461
Gerrit-PatchSet: 1
Gerrit-Owner: osmith <osmith(a)sysmocom.de>
Gerrit-MessageType: newchange
osmith has submitted this change. ( https://gerrit.osmocom.org/c/docker-playground/+/28455 )
Change subject: osmo-gsm-tester: use debian's soapysdr-module-lms7
......................................................................
osmo-gsm-tester: use debian's soapysdr-module-lms7
After switching from build.opensuse.org to obs.osmocom.org's published
packages, the soapysdr0.7-module-lms7 binary package we had does not
exist anymore.
I'm not sure where it came from, from the name it looks like it was
built from version 0.7 sources, but we only have a soapysdr_0.5.4
package in OBS that was added for debian 8/ubuntu 16.04 compatibility 4
years ago, and builds have been disabled for all architectures:
https://build.opensuse.org/package/show/network:osmocom:nightly/soapysdr
Instead of relying on this leftover binary package, use the one provided
by debian instead. This osmo-gsm-tester docker container is based on
debian-buster, which has soapysdr 0.6 packaged. If we should really need
0.7, we could switch it to bullseye or build it from source while
building the container, or add it back to obs.osmocom.org.
I verified that the container builds with this change.
Fix for:
E: Unable to locate package soapysdr0.7-module-lms7
Change-Id: Ie2408258eda407d9db6c2f0f5fbe475861756778
---
M osmo-gsm-tester/Dockerfile
1 file changed, 1 insertion(+), 1 deletion(-)
Approvals:
Jenkins Builder: Verified
fixeria: Looks good to me, but someone else must approve
laforge: Looks good to me, approved
diff --git a/osmo-gsm-tester/Dockerfile b/osmo-gsm-tester/Dockerfile
index 052c565..36fc20e 100644
--- a/osmo-gsm-tester/Dockerfile
+++ b/osmo-gsm-tester/Dockerfile
@@ -101,7 +101,7 @@
libuhd-dev \
libczmq-dev \
libsoapysdr-dev \
- soapysdr0.7-module-lms7 && \
+ soapysdr-module-lms7 && \
apt-get clean
# install gnuradio runtime dependencies
--
To view, visit https://gerrit.osmocom.org/c/docker-playground/+/28455
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: docker-playground
Gerrit-Branch: master
Gerrit-Change-Id: Ie2408258eda407d9db6c2f0f5fbe475861756778
Gerrit-Change-Number: 28455
Gerrit-PatchSet: 1
Gerrit-Owner: osmith <osmith(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: osmith <osmith(a)sysmocom.de>
Gerrit-MessageType: merged
osmith has submitted this change. ( https://gerrit.osmocom.org/c/osmo-ci/+/28457 )
Change subject: osmo-ci-docker-rebuild: don't always build osmo-gsm-tester
......................................................................
osmo-ci-docker-rebuild: don't always build osmo-gsm-tester
Currently there is only one jenkins node labeled as
osmo-gsm-tester-build. Build the osmo-gsm-tester container only there,
not on all x86_64 nodes.
The /var/tmp/osmo-gsm-tester/state directory is set up by
ansible/roles/gsm-tester/tasks/main.yml.
Related: https://jenkins.osmocom.org/jenkins/label/osmo-gsm-tester-build/
Change-Id: I9191d6d54d516ce75f3f576f34463dcaad22c85a
---
M scripts/osmo-ci-docker-rebuild.sh
1 file changed, 1 insertion(+), 1 deletion(-)
Approvals:
laforge: Looks good to me, approved
fixeria: Looks good to me, but someone else must approve
Jenkins Builder: Verified
diff --git a/scripts/osmo-ci-docker-rebuild.sh b/scripts/osmo-ci-docker-rebuild.sh
index f46bec1..ed441fe 100755
--- a/scripts/osmo-ci-docker-rebuild.sh
+++ b/scripts/osmo-ci-docker-rebuild.sh
@@ -18,7 +18,7 @@
"debian-bullseye-erlang"
fi
-if [ "$(arch)" = "x86_64" ]; then
+if [ -d "/var/tmp/osmo-gsm-tester/state" ]; then
docker_images_require \
"osmo-gsm-tester"
fi
--
To view, visit https://gerrit.osmocom.org/c/osmo-ci/+/28457
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-ci
Gerrit-Branch: master
Gerrit-Change-Id: I9191d6d54d516ce75f3f576f34463dcaad22c85a
Gerrit-Change-Number: 28457
Gerrit-PatchSet: 2
Gerrit-Owner: osmith <osmith(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: osmith <osmith(a)sysmocom.de>
Gerrit-MessageType: merged