June 2022 - gerrit-log - lists.osmocom.org

Change in docker-playground[master]: ttcn3-bsc-test-sccplite/osmo-bsc.cfg: configure 3 additional TRX inst...

by fixeria

fixeria has submitted this change. ( https://gerrit.osmocom.org/c/docker-playground/+/28227 ) Change subject: ttcn3-bsc-test-sccplite/osmo-bsc.cfg: configure 3 additional TRX instances for BTS2 ...................................................................... ttcn3-bsc-test-sccplite/osmo-bsc.cfg: configure 3 additional TRX instances for BTS2 This should have been done as part of [1] in order to avoid regressions in ttcn3-bsc-test-sccplite. Change-Id: I2d0045533814a2bacc384c06287066f2209a5f38 Fixes: [1] Iba4fbd5c9ed59783df4ac64e68b2beef73a812ff Related: SYS#5460 --- M ttcn3-bsc-test/sccplite/osmo-bsc.cfg 1 file changed, 90 insertions(+), 0 deletions(-) Approvals: Jenkins Builder: Verified pespin: Looks good to me, but someone else must approve fixeria: Looks good to me, approved diff --git a/ttcn3-bsc-test/sccplite/osmo-bsc.cfg b/ttcn3-bsc-test/sccplite/osmo-bsc.cfg index 564ebce..c7c6f90 100644 --- a/ttcn3-bsc-test/sccplite/osmo-bsc.cfg +++ b/ttcn3-bsc-test/sccplite/osmo-bsc.cfg @@ -346,6 +346,96 @@ timeslot 7 phys_chan_config PDCH hopping enabled 0 + trx 1 + rf_locked 0 + arfcn 873 + nominal power 23 + max_power_red 20 + rsl e1 tei 0 + timeslot 0 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 1 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 2 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 3 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 4 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 5 + phys_chan_config TCH/H + hopping enabled 0 + timeslot 6 + phys_chan_config PDCH + hopping enabled 0 + timeslot 7 + phys_chan_config PDCH + hopping enabled 0 + trx 2 + rf_locked 0 + arfcn 875 + nominal power 23 + max_power_red 20 + rsl e1 tei 0 + timeslot 0 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 1 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 2 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 3 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 4 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 5 + phys_chan_config TCH/H + hopping enabled 0 + timeslot 6 + phys_chan_config PDCH + hopping enabled 0 + timeslot 7 + phys_chan_config PDCH + hopping enabled 0 + trx 3 + rf_locked 0 + arfcn 877 + nominal power 23 + max_power_red 20 + rsl e1 tei 0 + timeslot 0 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 1 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 2 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 3 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 4 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 5 + phys_chan_config TCH/H + hopping enabled 0 + timeslot 6 + phys_chan_config PDCH + hopping enabled 0 + timeslot 7 + phys_chan_config PDCH + hopping enabled 0 bts 3 type sysmobts band DCS1800 -- To view, visit https://gerrit.osmocom.org/c/docker-playground/+/28227 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: docker-playground Gerrit-Branch: master Gerrit-Change-Id: I2d0045533814a2bacc384c06287066f2209a5f38 Gerrit-Change-Number: 28227 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: merged

3 years, 2 months

1
0
0 0

Change in docker-playground[master]: ttcn3-bsc-test-sccplite/osmo-bsc.cfg: configure 3 additional TRX inst...

by fixeria

fixeria has posted comments on this change. ( https://gerrit.osmocom.org/c/docker-playground/+/28227 ) Change subject: ttcn3-bsc-test-sccplite/osmo-bsc.cfg: configure 3 additional TRX instances for BTS2 ...................................................................... Patch Set 1: Code-Review+2 -- To view, visit https://gerrit.osmocom.org/c/docker-playground/+/28227 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: docker-playground Gerrit-Branch: master Gerrit-Change-Id: I2d0045533814a2bacc384c06287066f2209a5f38 Gerrit-Change-Number: 28227 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-Comment-Date: Tue, 07 Jun 2022 10:28:27 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

3 years, 2 months

1
0
0 0

Change in docker-playground[master]: ttcn3-bsc-test-sccplite/osmo-bsc.cfg: configure 3 additional TRX inst...

by pespin

Attention is currently required from: fixeria. pespin has posted comments on this change. ( https://gerrit.osmocom.org/c/docker-playground/+/28227 ) Change subject: ttcn3-bsc-test-sccplite/osmo-bsc.cfg: configure 3 additional TRX instances for BTS2 ...................................................................... Patch Set 1: Code-Review+1 -- To view, visit https://gerrit.osmocom.org/c/docker-playground/+/28227 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: docker-playground Gerrit-Branch: master Gerrit-Change-Id: I2d0045533814a2bacc384c06287066f2209a5f38 Gerrit-Change-Number: 28227 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Comment-Date: Tue, 07 Jun 2022 10:13:11 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

3 years, 2 months

1
0
0 0

Change in docker-playground[master]: ttcn3-bsc-test-sccplite/osmo-bsc.cfg: configure 3 additional TRX inst...

by fixeria

fixeria has uploaded this change for review. ( https://gerrit.osmocom.org/c/docker-playground/+/28227 ) Change subject: ttcn3-bsc-test-sccplite/osmo-bsc.cfg: configure 3 additional TRX instances for BTS2 ...................................................................... ttcn3-bsc-test-sccplite/osmo-bsc.cfg: configure 3 additional TRX instances for BTS2 This should have been done as part of [1] in order to avoid regressions in ttcn3-bsc-test-sccplite. Change-Id: I2d0045533814a2bacc384c06287066f2209a5f38 Fixes: [1] Iba4fbd5c9ed59783df4ac64e68b2beef73a812ff Related: SYS#5460 --- M ttcn3-bsc-test/sccplite/osmo-bsc.cfg 1 file changed, 90 insertions(+), 0 deletions(-) git pull ssh://gerrit.osmocom.org:29418/docker-playground refs/changes/27/28227/1 diff --git a/ttcn3-bsc-test/sccplite/osmo-bsc.cfg b/ttcn3-bsc-test/sccplite/osmo-bsc.cfg index 564ebce..c7c6f90 100644 --- a/ttcn3-bsc-test/sccplite/osmo-bsc.cfg +++ b/ttcn3-bsc-test/sccplite/osmo-bsc.cfg @@ -346,6 +346,96 @@ timeslot 7 phys_chan_config PDCH hopping enabled 0 + trx 1 + rf_locked 0 + arfcn 873 + nominal power 23 + max_power_red 20 + rsl e1 tei 0 + timeslot 0 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 1 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 2 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 3 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 4 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 5 + phys_chan_config TCH/H + hopping enabled 0 + timeslot 6 + phys_chan_config PDCH + hopping enabled 0 + timeslot 7 + phys_chan_config PDCH + hopping enabled 0 + trx 2 + rf_locked 0 + arfcn 875 + nominal power 23 + max_power_red 20 + rsl e1 tei 0 + timeslot 0 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 1 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 2 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 3 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 4 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 5 + phys_chan_config TCH/H + hopping enabled 0 + timeslot 6 + phys_chan_config PDCH + hopping enabled 0 + timeslot 7 + phys_chan_config PDCH + hopping enabled 0 + trx 3 + rf_locked 0 + arfcn 877 + nominal power 23 + max_power_red 20 + rsl e1 tei 0 + timeslot 0 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 1 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 2 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 3 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 4 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 5 + phys_chan_config TCH/H + hopping enabled 0 + timeslot 6 + phys_chan_config PDCH + hopping enabled 0 + timeslot 7 + phys_chan_config PDCH + hopping enabled 0 bts 3 type sysmobts band DCS1800 -- To view, visit https://gerrit.osmocom.org/c/docker-playground/+/28227 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: docker-playground Gerrit-Branch: master Gerrit-Change-Id: I2d0045533814a2bacc384c06287066f2209a5f38 Gerrit-Change-Number: 28227 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-MessageType: newchange

3 years, 2 months

1
0
0 0

Change in osmo-upf[master]: api: add osmo_pfcp_ie_node_id_to_str_c()

by fixeria

Attention is currently required from: neels. fixeria has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-upf/+/28226 ) Change subject: api: add osmo_pfcp_ie_node_id_to_str_c() ...................................................................... Patch Set 3: Code-Review+1 -- To view, visit https://gerrit.osmocom.org/c/osmo-upf/+/28226 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-upf Gerrit-Branch: master Gerrit-Change-Id: I5c580bc510afce58a03dea0861db9630b063b2ae Gerrit-Change-Number: 28226 Gerrit-PatchSet: 3 Gerrit-Owner: neels <nhofmeyr(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Attention: neels <nhofmeyr(a)sysmocom.de> Gerrit-Comment-Date: Tue, 07 Jun 2022 09:54:57 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

3 years, 2 months

1
0
0 0

Change in osmo-upf[master]: pfcp ie: tweak CP Function Features

by fixeria

Attention is currently required from: neels. fixeria has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-upf/+/28225 ) Change subject: pfcp ie: tweak CP Function Features ...................................................................... Patch Set 2: Code-Review+1 -- To view, visit https://gerrit.osmocom.org/c/osmo-upf/+/28225 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-upf Gerrit-Branch: master Gerrit-Change-Id: Icda891a2f3401e58f142f229465403d5dc8befe5 Gerrit-Change-Number: 28225 Gerrit-PatchSet: 2 Gerrit-Owner: neels <nhofmeyr(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Attention: neels <nhofmeyr(a)sysmocom.de> Gerrit-Comment-Date: Tue, 07 Jun 2022 09:53:58 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

3 years, 2 months

1
0
0 0

Change in osmo-upf[master]: pfcp/Makefile.am: add missing pfcp_ies_auto.h entry

by fixeria

Attention is currently required from: neels. fixeria has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-upf/+/28224 ) Change subject: pfcp/Makefile.am: add missing pfcp_ies_auto.h entry ...................................................................... Patch Set 2: Code-Review+1 -- To view, visit https://gerrit.osmocom.org/c/osmo-upf/+/28224 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-upf Gerrit-Branch: master Gerrit-Change-Id: I6fbfe1fcd084f2d16334bb3e44d9891d9485d59f Gerrit-Change-Number: 28224 Gerrit-PatchSet: 2 Gerrit-Owner: neels <nhofmeyr(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Attention: neels <nhofmeyr(a)sysmocom.de> Gerrit-Comment-Date: Tue, 07 Jun 2022 09:53:12 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

3 years, 2 months

1
0
0 0

Change in osmo-ttcn3-hacks[master]: BSC_Tests: configure 3 additional TRX instances for BTS2

by fixeria

fixeria has submitted this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/28213 ) Change subject: BSC_Tests: configure 3 additional TRX instances for BTS2 ...................................................................... BSC_Tests: configure 3 additional TRX instances for BTS2 Change-Id: Ie1241c54abac9a56906c525155cbf7482bca738e Related: Iba4fbd5c9ed59783df4ac64e68b2beef73a812ff Related: SYS#5460 --- M bsc/BSC_Tests.ttcn M bsc/osmo-bsc.cfg 2 files changed, 91 insertions(+), 1 deletion(-) Approvals: laforge: Looks good to me, approved pespin: Looks good to me, but someone else must approve Jenkins Builder: Verified diff --git a/bsc/BSC_Tests.ttcn b/bsc/BSC_Tests.ttcn index b7de157..b445709 100644 --- a/bsc/BSC_Tests.ttcn +++ b/bsc/BSC_Tests.ttcn @@ -106,7 +106,7 @@ private const BtsParams c_BtsParams[NUM_BTS_CFG] := { /* BTS0 */ { trx_num := 1, tsc := 2 }, /* BTS1 */ { trx_num := 1, tsc := 3 }, - /* BTS2 */ { trx_num := 1, tsc := 4 }, + /* BTS2 */ { trx_num := 4, tsc := 4 }, /* BTS3 */ { trx_num := 1, tsc := 4 } } diff --git a/bsc/osmo-bsc.cfg b/bsc/osmo-bsc.cfg index 2f8ee6d..c9cc6a0 100644 --- a/bsc/osmo-bsc.cfg +++ b/bsc/osmo-bsc.cfg @@ -350,6 +350,96 @@ timeslot 7 phys_chan_config PDCH hopping enabled 0 + trx 1 + rf_locked 0 + arfcn 873 + nominal power 23 + max_power_red 20 + rsl e1 tei 0 + timeslot 0 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 1 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 2 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 3 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 4 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 5 + phys_chan_config TCH/H + hopping enabled 0 + timeslot 6 + phys_chan_config PDCH + hopping enabled 0 + timeslot 7 + phys_chan_config PDCH + hopping enabled 0 + trx 2 + rf_locked 0 + arfcn 875 + nominal power 23 + max_power_red 20 + rsl e1 tei 0 + timeslot 0 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 1 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 2 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 3 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 4 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 5 + phys_chan_config TCH/H + hopping enabled 0 + timeslot 6 + phys_chan_config PDCH + hopping enabled 0 + timeslot 7 + phys_chan_config PDCH + hopping enabled 0 + trx 3 + rf_locked 0 + arfcn 877 + nominal power 23 + max_power_red 20 + rsl e1 tei 0 + timeslot 0 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 1 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 2 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 3 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 4 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 5 + phys_chan_config TCH/H + hopping enabled 0 + timeslot 6 + phys_chan_config PDCH + hopping enabled 0 + timeslot 7 + phys_chan_config PDCH + hopping enabled 0 bts 3 type osmo-bts band DCS1800 -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/28213 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: Ie1241c54abac9a56906c525155cbf7482bca738e Gerrit-Change-Number: 28213 Gerrit-PatchSet: 4 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: merged

3 years, 2 months

1
0
0 0

Change in osmo-ttcn3-hacks[master]: BSC_Tests: add support for per-TRX RSL connections

by fixeria

fixeria has submitted this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/28212 ) Change subject: BSC_Tests: add support for per-TRX RSL connections ...................................................................... BSC_Tests: add support for per-TRX RSL connections So far it was possible to communicate with multiple BTS instances, however we were limited to only one IPA/RSL connection per BTS. Communicating with additional TRX instances requires establishing additional per-TRX IPA/RSL connections. This patch extends the testsuite infrastructure, so that it becomes possible to have up to 4 individual TRX instances for each BTS. * Introduce record 'BtsParams', store per-BTS params in an array. * IPA_RSL_PT: test_CT.IPA_RSL[NUM_BTS] -> test_CT.IPA_RSL[NUM_BTS][NUM_TRX]. * BTS_State: test_CT.bts[NUM_BTS] -> test_CT.bts[NUM_BTS][NUM_TRX]. * f_init_bts_and_check_sysinfo() accepts number of TRX instances. * f_init_bts() accepts number of TRX instances to configure. * f_ipa_rsl_start() accepts a BtsTrxIdx param. * Introduce record BtsTrxIdx allowing to specify BTS/TRX index values. * f_ipa_tx(), f_exp_ipa_rx() accept a BtsTrxIdx param (default {0, 0}). * f_est_dchan[_dyn]() accept a BtsTrxIdx param (default {0, 0}). ** and store the given BtsTrxIdx in returned DchanTuple. * f_chreq_act_ack() accepts a BtsTrxIdx param (default {0, 0}). * f_expect_chan_rel() accepts a BtsTrxIdx param (default {0, 0}). * f_exp_ipa_rx_nonfatal() accepts BtsTrxIdx (default {0, 0}). * f_exp_chan_rel_and_clear() uses BtsTrxIdx indicated in the given DchanTuple. * Fix CTRL/statsd expectations in TC_stat_num_bts_connected_[123]. * Fix CTRL expectations in TC_ctrl_trx_rf_locked. The major limitation is that MSC_ConnHdlr components still have no access to additional TRX instances - this can be implemented later. Change-Id: Ic0fd97234464ef624010a5f01189aa61f3393b84 Related: SYS#5460 --- M bsc/BSC_Tests.ttcn M bsc/BSC_Tests_CBSP.ttcn M bsc/BSC_Tests_LCLS.ttcn M bsc/BSC_Tests_VAMOS.ttcn 4 files changed, 471 insertions(+), 391 deletions(-) Approvals: laforge: Looks good to me, approved pespin: Looks good to me, but someone else must approve Jenkins Builder: Verified fixeria: Verified diff --git a/bsc/BSC_Tests.ttcn b/bsc/BSC_Tests.ttcn index d9b178f..b7de157 100644 --- a/bsc/BSC_Tests.ttcn +++ b/bsc/BSC_Tests.ttcn @@ -75,10 +75,10 @@ import from GSM_RestOctets all; import from TCCConversion_Functions all; -type record of integer integer_list; - +const integer NUM_TRX := 4; const integer NUM_BTS := 3; const integer NUM_BTS_CFG := 4; /* we have 4 BTS in the osmo-bsc.cfg (for inter-BSC HO tests) but use only 3 */ +const integer NUM_TRX_CFG := 1; /* we support up to 4 TRX per BTS, but have only 1 TRX per BTS in osmo-bsc.cfg */ const integer NUM_MSC := 3; const float T3101_MAX := 12.0; @@ -87,17 +87,27 @@ const integer NUM_TCHF_PER_BTS := 4; const integer NUM_SDCCH_PER_BTS := 3; +friend type record BtsTrxIdx { + uint8_t bts, + uint8_t trx +} + +private type record BtsParams { + integer trx_num, + integer tsc +} + /* Default Training Sequence Code expected for bts[i]: * BTS 0 has BSIC 10 (and no explicit timeslot training_sequence_code config), so expecting TSC = (BSIC & 7) = 2. * BTS 1 has BSIC 11, TSC = (BSIC & 7) = 3. * BTS 2 has BSIC 12, TSC = (BSIC & 7) = 4. * BTS 2 has BSIC 12, TSC = (BSIC & 7) = 4. */ -const integer_list BTS_TSC := { - 2, - 3, - 4, - 4 +private const BtsParams c_BtsParams[NUM_BTS_CFG] := { + /* BTS0 */ { trx_num := 1, tsc := 2 }, + /* BTS1 */ { trx_num := 1, tsc := 3 }, + /* BTS2 */ { trx_num := 1, tsc := 4 }, + /* BTS3 */ { trx_num := 1, tsc := 4 } } /* per-BTS state which we keep */ @@ -593,12 +603,12 @@ } type component test_CT extends CTRL_Adapter_CT { - /* Array of per-BTS state */ - var BTS_State bts[NUM_BTS]; + /* Array of per-BTS/TRX state */ + var BTS_State bts[NUM_BTS][NUM_TRX]; /* RSL common Channel Port (for RSL_Emulation) */ port RSL_CCHAN_PT RSL_CCHAN[NUM_BTS]; - /* array of per-BTS RSL test ports */ - port IPA_RSL_PT IPA_RSL[NUM_BTS]; + /* array of per-BTS/TRX RSL test ports */ + port IPA_RSL_PT IPA_RSL[NUM_BTS][NUM_TRX]; port IPA_CODEC_PT IPA; /* Required for compilation of TC_rsl_unknown_unit_id() */ /* CTRL muxed over IPA in SCCPlite conn BSC<->MSC (or BSC-NAT) */ port IPA_CTRL_PT SCCPLITE_IPA_CTRL; @@ -731,7 +741,7 @@ } pars.exp_ms_power_level := mp_exp_ms_power_level; pars.mscpool.bssap_idx := bssap_idx; - pars.expect_tsc := BTS_TSC[0]; + pars.expect_tsc := c_BtsParams[0].tsc; pars.imsi := f_rnd_imsi('00101'H); log(testcasename(), ": using IMSI ", pars.imsi); @@ -925,21 +935,21 @@ * \param clnt IPA_Client for which to establish * \param bsc_host IP address / hostname of the BSC * \param bsc_port TCP port number of the BSC - * \param i number identifying this BTS + * \param idx BTS/TRX index values * \param handler_mode Start an RSL_Emulation_CT component (true) or not (false) */ -function f_ipa_rsl_start(inout IPA_Client clnt, charstring bsc_host, PortNumber bsc_port, integer i, - boolean handler_mode := false) +function f_ipa_rsl_start(inout IPA_Client clnt, charstring bsc_host, PortNumber bsc_port, + BtsTrxIdx idx := {0, 0}, boolean handler_mode := false) runs on test_CT { timer T := 10.0; - clnt.id := "IPA" & int2str(i) & "-RSL"; + clnt.id := "IPA-BTS" & int2str(idx.bts) & "-TRX" & int2str(idx.trx) & "-RSL"; clnt.vc_IPA := IPA_Emulation_CT.create(clnt.id & "-IPA") alive; clnt.ccm_pars := c_IPA_default_ccm_pars; clnt.ccm_pars.name := "Osmocom TTCN-3 BTS Simulator"; - clnt.ccm_pars.unit_id := int2str(1234+i) & "/0/0"; + clnt.ccm_pars.unit_id := int2str(1234 + idx.bts) & "/0/" & int2str(idx.trx); if (handler_mode) { clnt.vc_RSL := RSL_Emulation_CT.create(clnt.id & "-RSL") alive; - connect(clnt.vc_RSL:CCHAN_PT, self:RSL_CCHAN[i]); + connect(clnt.vc_RSL:CCHAN_PT, self:RSL_CCHAN[idx.bts]); } map(clnt.vc_IPA:IPA_PORT, system:IPA_CODEC_PT); @@ -947,10 +957,11 @@ if (handler_mode) { connect(clnt.vc_IPA:IPA_RSL_PORT, clnt.vc_RSL:IPA_PT); } else { - connect(clnt.vc_IPA:IPA_RSL_PORT, self:IPA_RSL[i]); + connect(clnt.vc_IPA:IPA_RSL_PORT, self:IPA_RSL[idx.bts][idx.trx]); } - clnt.vc_IPA.start(IPA_Emulation.main_client(bsc_host, bsc_port, "", 10000+i, clnt.ccm_pars)); + var integer local_port := 10000 + idx.bts * 1000 + idx.trx; + clnt.vc_IPA.start(IPA_Emulation.main_client(bsc_host, bsc_port, "", local_port, clnt.ccm_pars)); if (handler_mode) { clnt.vc_RSL.start(RSL_Emulation.main()); return; @@ -959,11 +970,11 @@ /* wait for IPA RSL link to connect and send ID ACK */ T.start; alt { - [] IPA_RSL[i].receive(tr_ASP_IPA_EV(ASP_IPA_EVENT_ID_ACK)) { + [] IPA_RSL[idx.bts][idx.trx].receive(tr_ASP_IPA_EV(ASP_IPA_EVENT_ID_ACK)) { T.stop; } - [] IPA_RSL[i].receive(ASP_IPA_Event:?) { repeat } - [] IPA_RSL[i].receive { repeat } + [] IPA_RSL[idx.bts][idx.trx].receive(ASP_IPA_Event:?) { repeat } + [] IPA_RSL[idx.bts][idx.trx].receive { repeat } [] T.timeout { setverdict(fail, "Timeout RSL waiting for ASP_IPA_EVENT_ID_ACK"); mtc.stop; @@ -1108,19 +1119,19 @@ var ASP_RSL_Unitdata rx_rsl_ud; /* For handler_mode := false, receiving the RSL bootstrap messages directly on IPA_RSL */ - [] IPA_RSL[rsl_idx].receive(tr_ASP_RSL_UD(tr_RSL_NO_BCCH_INFO)) -> value rx_rsl_ud { + [] IPA_RSL[rsl_idx][0].receive(tr_ASP_RSL_UD(tr_RSL_NO_BCCH_INFO)) -> value rx_rsl_ud { f_sysinfo_seen(rsl_idx, rx_rsl_ud.rsl); repeat; } - [] IPA_RSL[rsl_idx].receive(tr_ASP_RSL_UD(tr_RSL_BCCH_INFO)) -> value rx_rsl_ud { + [] IPA_RSL[rsl_idx][0].receive(tr_ASP_RSL_UD(tr_RSL_BCCH_INFO)) -> value rx_rsl_ud { f_sysinfo_seen(rsl_idx, rx_rsl_ud.rsl); repeat; } - [] IPA_RSL[rsl_idx].receive(tr_ASP_RSL_UD(tr_RSL_NO_SACCH_FILL)) -> value rx_rsl_ud { + [] IPA_RSL[rsl_idx][0].receive(tr_ASP_RSL_UD(tr_RSL_NO_SACCH_FILL)) -> value rx_rsl_ud { f_sysinfo_seen(rsl_idx, rx_rsl_ud.rsl); repeat; } - [] IPA_RSL[rsl_idx].receive(tr_ASP_RSL_UD(tr_RSL_SACCH_FILL)) -> value rx_rsl_ud { + [] IPA_RSL[rsl_idx][0].receive(tr_ASP_RSL_UD(tr_RSL_SACCH_FILL)) -> value rx_rsl_ud { f_sysinfo_seen(rsl_idx, rx_rsl_ud.rsl); repeat; } @@ -1234,30 +1245,38 @@ f_init_mgcp("VirtMSC"); for (var integer i := 0; i < nr_bts; i := i+1) { - f_init_bts(i, handler_mode); + f_init_bts(i, c_BtsParams[i].trx_num, handler_mode); } /* Emit a marker to appear in the SUT's own logging output */ f_logp(BSCVTY, testcasename() & "() start"); } -function f_init_bts(integer bts_idx := 0, boolean handler_mode := false) +function f_init_bts(integer bts_idx := 0, + integer trx_num := NUM_TRX_CFG, + boolean handler_mode := false) runs on test_CT { /* wait until osmo-bts-omldummy has respawned */ f_wait_oml(bts_idx, "degraded", 5.0); - /* start RSL connection */ - f_ipa_rsl_start(bts[bts_idx].rsl, mp_bsc_ip, mp_bsc_rsl_port, bts_idx, handler_mode); + /* start RSL connection(s) */ + for (var integer trx_idx := 0; trx_idx < trx_num; trx_idx := trx_idx + 1) { + f_ipa_rsl_start(bts[bts_idx][trx_idx].rsl, + mp_bsc_ip, mp_bsc_rsl_port, + {bts_idx, trx_idx}, handler_mode); + } /* wait until BSC tells us "connected" */ f_wait_oml(bts_idx, "connected", 5.0); } -function f_init_bts_and_check_sysinfo(integer bts_idx := 0, boolean handler_mode := false, +function f_init_bts_and_check_sysinfo(integer bts_idx := 0, + integer trx_num := NUM_TRX_CFG, + boolean handler_mode := false, template SystemInformationConfig expect_si) runs on test_CT { var default sysinfo := activate(as_catch_RSL_sysinfo(bts_idx)); - f_init_bts(bts_idx, handler_mode); + f_init_bts(bts_idx, trx_num, handler_mode); /* Give some time to (hopefully/most likely) collect all system informations from RSL startup. * We could stop as soon as all expected SI are received, but then we might miss SI that we don't expect and @@ -1278,18 +1297,20 @@ } } -/* expect to receive a RSL message matching a specified template on a given BTS / stream */ -function f_exp_ipa_rx(integer bts_nr, template (present) RSL_Message t_rx, float t_secs := 2.0, IpaStreamId sid := IPAC_PROTO_RSL_TRX0) +/* expect to receive a RSL message matching a specified template on a given BTS / TRX */ +function f_exp_ipa_rx(template (present) RSL_Message t_rx, + BtsTrxIdx idx := {0, 0}, + float Tval := 2.0) runs on test_CT return RSL_Message { var ASP_RSL_Unitdata rx_rsl_ud; - timer T := t_secs; + timer T := Tval; T.start; alt { - [] IPA_RSL[bts_nr].receive(tr_ASP_RSL_UD(t_rx, sid)) -> value rx_rsl_ud { + [] IPA_RSL[idx.bts][idx.trx].receive(tr_ASP_RSL_UD(t_rx, ?)) -> value rx_rsl_ud { T.stop; } - [] IPA_RSL[bts_nr].receive { repeat; } + [] IPA_RSL[idx.bts][idx.trx].receive { repeat; } [] T.timeout { setverdict(fail, "Timeout expecting ", t_rx); mtc.stop; @@ -1299,9 +1320,11 @@ } /* helper function to transmit RSL on a given BTS/stream */ -function f_ipa_tx(integer bts_nr, template (value) RSL_Message t_tx, IpaStreamId sid := IPAC_PROTO_RSL_TRX0) +function f_ipa_tx(template (value) RSL_Message t_tx, + BtsTrxIdx idx := {0, 0}, + IpaStreamId sid := IPAC_PROTO_RSL_TRX0) runs on test_CT { - IPA_RSL[bts_nr].send(ts_ASP_RSL_UD(t_tx, sid)); + IPA_RSL[idx.bts][idx.trx].send(ts_ASP_RSL_UD(t_tx, sid)); } @@ -1312,8 +1335,8 @@ f_init(1); - IPA_RSL[0].send(ts_ASP_RSL_UD(ts_RSL_CHAN_RQD('23'O, 23))); - rsl_unused := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); + f_ipa_tx(ts_RSL_CHAN_RQD('23'O, 23)); + rsl_unused := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); f_shutdown_helper(); } @@ -1346,25 +1369,25 @@ f_logp(BSCVTY, "f_chan_act_counter(" & chreq_ctr_suffix & ")"); var RSL_Message rx_rsl; - f_ipa_tx(0, ts_RSL_CHAN_RQD(ra, fn)); - rx_rsl := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); + f_ipa_tx(ts_RSL_CHAN_RQD(ra, fn)); + rx_rsl := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); var RslChannelNr chan_nr := rx_rsl.ies[0].body.chan_nr; f_ctrs_bts_add(0, "chreq:total"); f_ctrs_bts_add(0, "chreq:attempted_" & chreq_ctr_suffix); f_ctrs_bts_verify(); - f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(chan_nr, fn+10)); - rx_rsl := f_exp_ipa_rx(0, tr_RSL_IMM_ASSIGN(0)); + f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, fn+10)); + rx_rsl := f_exp_ipa_rx(tr_RSL_IMM_ASSIGN(0)); f_ctrs_bts_add(0, "chreq:successful"); f_ctrs_bts_add(0, "chreq:successful_" & chreq_ctr_suffix); f_ctrs_bts_verify(); /* test is done, release RSL Conn Fail Ind to clean up */ - f_ipa_tx(0, ts_RSL_CONN_FAIL_IND(chan_nr, RSL_ERR_RADIO_LINK_FAIL)); - rx_rsl := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL), 10.0); - f_ipa_tx(0, ts_RSL_RF_CHAN_REL_ACK(chan_nr)); + f_ipa_tx(ts_RSL_CONN_FAIL_IND(chan_nr, RSL_ERR_RADIO_LINK_FAIL)); + rx_rsl := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL), Tval := 10.0); + f_ipa_tx(ts_RSL_RF_CHAN_REL_ACK(chan_nr)); f_sleep(1.0); } @@ -1411,7 +1434,7 @@ var RslChannelNr chan_nr := f_chreq_act_ack(ra); /* expect BSC to disable the channel again if there's no RLL EST IND */ - rx_rsl := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL), T3101_MAX); + rx_rsl := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL), Tval := T3101_MAX); f_shutdown_helper(); } @@ -1440,10 +1463,10 @@ f_init(1); f_vty_allow_emerg_bts(false, 0); - IPA_RSL[0].clear; - f_ipa_tx(0, ts_RSL_CHAN_RQD('A5'O, 23)); + IPA_RSL[0][0].clear; + f_ipa_tx(ts_RSL_CHAN_RQD('A5'O, 23)); - rx_rsl := f_exp_ipa_rx(0, tr_RSL_MsgTypeC(RSL_MT_IMMEDIATE_ASSIGN_CMD)); + rx_rsl := f_exp_ipa_rx(tr_RSL_MsgTypeC(RSL_MT_IMMEDIATE_ASSIGN_CMD)); rr := dec_GsmRrMessage(rx_rsl.ies[1].body.full_imm_ass_info.payload); if (rr.header.message_type == IMMEDIATE_ASSIGNMENT_REJECT) { setverdict(pass); @@ -1467,13 +1490,13 @@ var RslChannelNr chan_nr := f_chreq_act_ack(); var octetstring l3 := '00010203040506'O - f_ipa_tx(0, ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); + f_ipa_tx(ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))); /* expect BSC to disable the channel again if there's no response from MSC */ /* MS waits 20s (T3210) at LU; 10s (T3230) at CM SERV REQ and 5s (T3220) AT detach */ - f_expect_chan_rel(0, chan_nr, expect_rll_rel_req := false); + f_expect_chan_rel(chan_nr, expect_rll_rel_req := false); f_shutdown_helper(); } @@ -1488,13 +1511,13 @@ var RslChannelNr chan_nr := f_chreq_act_ack(); var octetstring l3 := '00010203040506'O - f_ipa_tx(0, ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); + f_ipa_tx(ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))) -> value rx_c_ind; BSSAP.send(ts_BSSAP_DISC_req(rx_c_ind.connectionId, 0)); /* expect BSC to disable the channel */ - f_expect_chan_rel(0, chan_nr, expect_rll_rel_req := false); + f_expect_chan_rel(chan_nr, expect_rll_rel_req := false); f_shutdown_helper(); } @@ -1507,11 +1530,11 @@ chact_nack := f_ctrl_get_ratectr_abs(IPA_CTRL, "bts", 0, "chan_act:nack"); - f_ipa_tx(0, ts_RSL_CHAN_RQD('33'O, 33)); - rx_rsl := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); + f_ipa_tx(ts_RSL_CHAN_RQD('33'O, 33)); + rx_rsl := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); var RslChannelNr chan_nr := rx_rsl.ies[0].body.chan_nr; - f_ipa_tx(0, ts_RSL_CHAN_ACT_NACK(chan_nr, RSL_ERR_EQUIPMENT_FAIL)); + f_ipa_tx(ts_RSL_CHAN_ACT_NACK(chan_nr, RSL_ERR_EQUIPMENT_FAIL)); /* wait for some time to hope the NACK arrives before the CTRL GET below */ f_sleep(0.5); @@ -1539,19 +1562,19 @@ var RslChannelNr chan_nr := f_chreq_act_ack('33'O, i); } - IPA_RSL[0].clear; + IPA_RSL[0][0].clear; f_ctrl_get_exp_ratectr_abs(IPA_CTRL, "bts", 0, "chreq:total", chreq_total + NUM_TCHF_PER_BTS + NUM_TCHH_PER_BTS + NUM_SDCCH_PER_BTS); /* now expect additional channel activations to fail */ - f_ipa_tx(0, ts_RSL_CHAN_RQD('42'O, 42)); + f_ipa_tx(ts_RSL_CHAN_RQD('42'O, 42)); alt { - [] IPA_RSL[0].receive(tr_ASP_RSL_UD(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV))) { + [] IPA_RSL[0][0].receive(tr_ASP_RSL_UD(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV))) { setverdict(fail, "Received CHAN ACT ACK without resources?!?"); } - [] IPA_RSL[0].receive(tr_ASP_RSL_UD(tr_RSL_IMM_ASSIGN(?))) -> value rsl_ud { + [] IPA_RSL[0][0].receive(tr_ASP_RSL_UD(tr_RSL_IMM_ASSIGN(?))) -> value rsl_ud { var GsmRrMessage rr; /* match on IMM ASS REJ */ rr := dec_GsmRrMessage(rsl_ud.rsl.ies[1].body.full_imm_ass_info.payload); @@ -1565,7 +1588,7 @@ repeat; } } - [] IPA_RSL[0].receive { repeat; } + [] IPA_RSL[0][0].receive { repeat; } } f_shutdown_helper(); } @@ -1584,18 +1607,18 @@ /* Expect CHANnel RELease */ alt { - [] IPA_RSL[0].receive(tr_ASP_RSL_UD(tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL))) { + [] IPA_RSL[0][0].receive(tr_ASP_RSL_UD(tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL))) { log("Received CHANnel RELease"); setverdict(pass); } - [] IPA_RSL[0].receive(tr_ASP_RSL_UD(tr_RSL_IMM_ASSIGN(?))) { + [] IPA_RSL[0][0].receive(tr_ASP_RSL_UD(tr_RSL_IMM_ASSIGN(?))) { /* See OS#3709, OsmoBSC should not send Immediate * Assignment Reject since a dedicated channel was * already allocated, and Immediate Assignment was * already sent. */ setverdict(fail, "Unexpected Immediate Assignment!"); } - [] IPA_RSL[0].receive { + [] IPA_RSL[0][0].receive { setverdict(fail, "Unexpected RSL message!"); } } @@ -1787,79 +1810,87 @@ type record DchanTuple { integer sccp_conn_id, - RslChannelNr rsl_chan_nr + RslChannelNr rsl_chan_nr, + BtsTrxIdx idx } type record of DchanTuple DchanTuples; /* Send CHAN RQD and wait for allocation; acknowledge it */ -private function f_chreq_act_ack(OCT1 ra := '23'O, GsmFrameNumber fn := 23) +private function f_chreq_act_ack(OCT1 ra := '23'O, + GsmFrameNumber fn := 23, + BtsTrxIdx idx := {0, 0}) runs on test_CT return RslChannelNr { var RSL_Message rx_rsl; - f_ipa_tx(0, ts_RSL_CHAN_RQD(ra, fn)); - rx_rsl := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); + f_ipa_tx(ts_RSL_CHAN_RQD(ra, fn), {idx.bts, 0}); + rx_rsl := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV), idx); var RslChannelNr chan_nr := rx_rsl.ies[0].body.chan_nr; - f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(chan_nr, fn+10)); - rx_rsl := f_exp_ipa_rx(0, tr_RSL_IMM_ASSIGN(0)); + f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, fn+10), idx); + rx_rsl := f_exp_ipa_rx(tr_RSL_IMM_ASSIGN(0), {idx.bts, 0}); return chan_nr; } /* helper function to establish a dedicated channel via BTS and MSC */ -function f_est_dchan(OCT1 ra, GsmFrameNumber fn, octetstring l3) +function f_est_dchan(OCT1 ra, GsmFrameNumber fn, octetstring l3, + BtsTrxIdx idx := {0, 0}) runs on test_CT return DchanTuple { var BSSAP_N_CONNECT_ind rx_c_ind; var DchanTuple dt; /* Send CHAN RQD and wait for allocation; acknowledge it */ - dt.rsl_chan_nr := f_chreq_act_ack(ra, fn); + dt.rsl_chan_nr := f_chreq_act_ack(ra, fn, idx); - f_ipa_tx(0, ts_RSL_EST_IND(dt.rsl_chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); + f_ipa_tx(ts_RSL_EST_IND(dt.rsl_chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3), idx); BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))) -> value rx_c_ind; dt.sccp_conn_id := rx_c_ind.connectionId; BSSAP.send(ts_BSSAP_CONNECT_res(dt.sccp_conn_id)); + dt.idx := idx; return dt; } /* Like f_est_dchan(), but for the first lchan of a dynamic timeslot: first ACK the deactivation of PDCH. */ -function f_est_dchan_dyn(OCT1 ra, GsmFrameNumber fn, octetstring l3) +function f_est_dchan_dyn(OCT1 ra, GsmFrameNumber fn, octetstring l3, + BtsTrxIdx idx := {0, 0}) runs on test_CT return DchanTuple { var BSSAP_N_CONNECT_ind rx_c_ind; var DchanTuple dt; /* Send CHAN RQD */ var RSL_Message rx_rsl; - f_ipa_tx(0, ts_RSL_CHAN_RQD(ra, fn)); + f_ipa_tx(ts_RSL_CHAN_RQD(ra, fn), {idx.bts, 0}); /* The dyn TS first deactivates PDCH */ - rx_rsl := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL), T3101_MAX); + rx_rsl := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL), idx, Tval := T3101_MAX); dt.rsl_chan_nr := rx_rsl.ies[0].body.chan_nr; - f_ipa_tx(0, ts_RSL_RF_CHAN_REL_ACK(dt.rsl_chan_nr)); + f_ipa_tx(ts_RSL_RF_CHAN_REL_ACK(dt.rsl_chan_nr), idx); - rx_rsl := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); + rx_rsl := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV), idx); dt.rsl_chan_nr := rx_rsl.ies[0].body.chan_nr; /* Now activates the signalling channel */ - f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(dt.rsl_chan_nr, fn+10)); - rx_rsl := f_exp_ipa_rx(0, tr_RSL_IMM_ASSIGN(0)); + f_ipa_tx(ts_RSL_CHAN_ACT_ACK(dt.rsl_chan_nr, fn+10), idx); + rx_rsl := f_exp_ipa_rx(tr_RSL_IMM_ASSIGN(0), {idx.bts, 0}); - f_ipa_tx(0, ts_RSL_EST_IND(dt.rsl_chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); + f_ipa_tx(ts_RSL_EST_IND(dt.rsl_chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3), idx); BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))) -> value rx_c_ind; dt.sccp_conn_id := rx_c_ind.connectionId; BSSAP.send(ts_BSSAP_CONNECT_res(dt.sccp_conn_id)); + dt.idx := idx; return dt; } /* expect RF CAN REL from BTS, acknowledge it and clear the MSC side */ -private function f_exp_chan_rel_and_clear(DchanTuple dt, integer bts_nr := 0) runs on test_CT { +private function f_exp_chan_rel_and_clear(DchanTuple dt) +runs on test_CT { var RSL_Message rx_rsl; /* expect BSC to disable the channel */ - rx_rsl := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL), T3101_MAX); + rx_rsl := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL), dt.idx, Tval := T3101_MAX); /* respond with CHAN REL ACK */ - f_ipa_tx(0, ts_RSL_RF_CHAN_REL_ACK(dt.rsl_chan_nr)); + f_ipa_tx(ts_RSL_RF_CHAN_REL_ACK(dt.rsl_chan_nr), dt.idx); /* expect Clear Complete from BSC */ BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_ClearComplete)); @@ -1878,7 +1909,7 @@ dt := f_est_dchan('23'O, 23, '00010203040506'O); /* simulate RLL REL IND */ - f_ipa_tx(0, ts_RSL_REL_IND(dt.rsl_chan_nr, valueof(ts_RslLinkID_DCCH(0)))); + f_ipa_tx(ts_RSL_REL_IND(dt.rsl_chan_nr, valueof(ts_RslLinkID_DCCH(0)))); /* expect Clear Request on MSC side */ BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_ClearRequest)) -> value rx_di; @@ -1888,7 +1919,7 @@ BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(cause))); /* expect BSC to disable the channel */ - f_exp_chan_rel_and_clear(dt, 0); + f_exp_chan_rel_and_clear(dt); /* wait for SCCP emulation to do its job */ f_sleep(1.0); @@ -1906,7 +1937,7 @@ dt := f_est_dchan('23'O, 23, '00010203040506'O); /* simulate CONN FAIL IND */ - f_ipa_tx(0, ts_RSL_CONN_FAIL_IND(dt.rsl_chan_nr, RSL_ERR_RADIO_LINK_FAIL)); + f_ipa_tx(ts_RSL_CONN_FAIL_IND(dt.rsl_chan_nr, RSL_ERR_RADIO_LINK_FAIL)); /* TODO: different cause values? */ /* expect Clear Request from BSC */ @@ -1917,7 +1948,7 @@ BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(cause))); /* expect BSC to disable the channel */ - f_exp_chan_rel_and_clear(dt, 0); + f_exp_chan_rel_and_clear(dt); /* wait for SCCP emulation to do its job */ f_sleep(1.0); @@ -1937,13 +1968,13 @@ dt.rsl_chan_nr := f_chreq_act_ack(f_rnd_ra_cs(), 23); /* BTS->BSC: simulate CONN FAIL IND */ - f_ipa_tx(0, ts_RSL_CONN_FAIL_IND(dt.rsl_chan_nr, RSL_ERR_RADIO_LINK_FAIL)); + f_ipa_tx(ts_RSL_CONN_FAIL_IND(dt.rsl_chan_nr, RSL_ERR_RADIO_LINK_FAIL)); /* BTS->BSC: Expect RF channel release from BSC on Abis */ - rx_rsl := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL), 10.0); + rx_rsl := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL), Tval := 10.0); /* BTS<-BSC: respond with CHAN REL ACK */ - f_ipa_tx(0, ts_RSL_RF_CHAN_REL_ACK(dt.rsl_chan_nr)); + f_ipa_tx(ts_RSL_RF_CHAN_REL_ACK(dt.rsl_chan_nr)); f_shutdown_helper(); } @@ -1962,15 +1993,15 @@ BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(0))); /* BTS->BSC: expect BSC to deactivate SACCH */ - rx_rsl := f_exp_ipa_rx(0, tr_RSL_DEACT_SACCH(dt.rsl_chan_nr)); + rx_rsl := f_exp_ipa_rx(tr_RSL_DEACT_SACCH(dt.rsl_chan_nr)); /* BTS->BSC: simulate a late CONN FAIL IND from BTS */ - f_ipa_tx(0, ts_RSL_CONN_FAIL_IND(dt.rsl_chan_nr, RSL_ERR_RADIO_LINK_FAIL)); + f_ipa_tx(ts_RSL_CONN_FAIL_IND(dt.rsl_chan_nr, RSL_ERR_RADIO_LINK_FAIL)); /* BTS<-BSC: Expect RF channel release from BSC on Abis */ - rx_rsl := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL), 10.0); + rx_rsl := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL), Tval := 10.0); /* BTS->BSC: respond with CHAN REL ACK */ - f_ipa_tx(0, ts_RSL_RF_CHAN_REL_ACK(dt.rsl_chan_nr)); + f_ipa_tx(ts_RSL_RF_CHAN_REL_ACK(dt.rsl_chan_nr)); /* BSC->MSC: expect Clear Complete from BSC */ BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_ClearComplete)); @@ -2027,7 +2058,8 @@ f_shutdown_helper(); } -function f_expect_chan_rel(integer bts_nr, RslChannelNr rsl_chan_nr, +function f_expect_chan_rel(RslChannelNr rsl_chan_nr, + BtsTrxIdx idx := {0, 0}, boolean expect_deact_sacch := true, boolean expect_rr_chan_rel := true, boolean expect_rll_rel_req := true, @@ -2047,11 +2079,11 @@ log("f_expect_chan_rel() expecting: expect_deact_sacch=", expect_deact_sacch, " expect_rr_chan_rel=", expect_rr_chan_rel, " expect_rll_rel_req=", expect_rll_rel_req); alt { - [] IPA_RSL[bts_nr].receive(tr_ASP_RSL_UD(tr_RSL_DEACT_SACCH(rsl_chan_nr))) { + [] IPA_RSL[idx.bts][idx.trx].receive(tr_ASP_RSL_UD(tr_RSL_DEACT_SACCH(rsl_chan_nr))) { got_deact_sacch := true; repeat; } - [] IPA_RSL[bts_nr].receive(tr_ASP_RSL_UD(tr_RSL_DATA_REQ(rsl_chan_nr, ?, decmatch tr_RRM_RR_RELEASE))) -> value ud { + [] IPA_RSL[idx.bts][idx.trx].receive(tr_ASP_RSL_UD(tr_RSL_DATA_REQ(rsl_chan_nr, ?, decmatch tr_RRM_RR_RELEASE))) -> value ud { got_rr_chan_rel := true; if (f_rsl_find_ie(ud.rsl, RSL_IE_L3_INFO, l3_ie) == false) { @@ -2083,20 +2115,20 @@ } repeat; } - [] IPA_RSL[bts_nr].receive(tr_ASP_RSL_UD(tr_RSL_REL_REQ(rsl_chan_nr, ?))) { + [] IPA_RSL[idx.bts][idx.trx].receive(tr_ASP_RSL_UD(tr_RSL_REL_REQ(rsl_chan_nr, ?))) { got_rll_rel_req := true; /* FIXME: Why are we getting this for LinkID SACCH? */ if (handle_rll_rel) { - f_ipa_tx(0, ts_RSL_REL_CONF(rsl_chan_nr, main_dcch)); + f_ipa_tx(ts_RSL_REL_CONF(rsl_chan_nr, main_dcch)); } repeat; } - [] IPA_RSL[bts_nr].receive(tr_ASP_RSL_UD(tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL))) { + [] IPA_RSL[idx.bts][idx.trx].receive(tr_ASP_RSL_UD(tr_RSL_MsgTypeD(RSL_MT_RF_CHAN_REL))) { /* respond with CHAN REL ACK */ - f_ipa_tx(0, ts_RSL_RF_CHAN_REL_ACK(rsl_chan_nr)); + f_ipa_tx(ts_RSL_RF_CHAN_REL_ACK(rsl_chan_nr)); } /* ignore any user data */ - [] IPA_RSL[bts_nr].receive(tr_ASP_RSL_UD(tr_RSL_MsgTypeR(?))) { + [] IPA_RSL[idx.bts][idx.trx].receive(tr_ASP_RSL_UD(tr_RSL_MsgTypeR(?))) { repeat; } } @@ -2134,7 +2166,7 @@ BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); } - f_expect_chan_rel(0, dt.rsl_chan_nr, expect_rll_rel_req := false); + f_expect_chan_rel(dt.rsl_chan_nr, expect_rll_rel_req := false); f_shutdown_helper(); } @@ -2167,7 +2199,7 @@ SystemInformationConfig_default, use that: */ var template CellSelIndValue exp_cells := f_tr_rr_chan_rel_earfcns(1); - f_expect_chan_rel(0, dt.rsl_chan_nr, expect_rll_rel_req := false, expect_cells := exp_cells); + f_expect_chan_rel(dt.rsl_chan_nr, expect_rll_rel_req := false, expect_cells := exp_cells); f_shutdown_helper(); } @@ -2212,7 +2244,7 @@ BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); } - f_expect_chan_rel(0, dt.rsl_chan_nr, expect_rll_rel_req := false); + f_expect_chan_rel(dt.rsl_chan_nr, expect_rll_rel_req := false); f_shutdown_helper(); } @@ -2227,7 +2259,7 @@ /* release the SCCP connection */ BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); - f_expect_chan_rel(0, dt.rsl_chan_nr, expect_rll_rel_req := false); + f_expect_chan_rel(dt.rsl_chan_nr, expect_rll_rel_req := false); f_shutdown_helper(); } @@ -2242,7 +2274,7 @@ /* release the SCCP connection */ BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); - f_expect_chan_rel(0, dt.rsl_chan_nr, expect_rll_rel_req := false); + f_expect_chan_rel(dt.rsl_chan_nr, expect_rll_rel_req := false); f_shutdown_helper(); } @@ -2255,7 +2287,7 @@ dt := f_est_dchan('23'O, 23, '00010203040506'O); /* Clear the queue, it might still contain stuff like IMMEDIATE ASSIGN */ - IPA_RSL[0].clear; + IPA_RSL[0][0].clear; /* perform BSSAP RESET, expect RESET ACK and DISC.ind on connection */ BSSAP.send(ts_BSSAP_UNITDATA_req(g_bssap[0].sccp_addr_peer, g_bssap[0].sccp_addr_own, ts_BSSMAP_Reset(0, g_osmux_enabled))); @@ -2264,7 +2296,7 @@ [] BSSAP.receive(tr_BSSAP_DISC_ind(dt.sccp_conn_id, ?, ?)) { } } - f_expect_chan_rel(0, dt.rsl_chan_nr, expect_rll_rel_req := false); + f_expect_chan_rel(dt.rsl_chan_nr, expect_rll_rel_req := false); f_shutdown_helper(); } @@ -2281,7 +2313,7 @@ f_init(1); dt := f_est_dchan('23'O, 23, '00010203040506'O); - f_expect_chan_rel(0, dt.rsl_chan_nr, expect_rll_rel_req := false); + f_expect_chan_rel(dt.rsl_chan_nr, expect_rll_rel_req := false); f_shutdown_helper(); } @@ -2298,7 +2330,7 @@ BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); } - f_expect_chan_rel(0, dt.rsl_chan_nr, expect_rll_rel_req := false, expect_rr_cause := expect_rr_cause); + f_expect_chan_rel(dt.rsl_chan_nr, expect_rll_rel_req := false, expect_rr_cause := expect_rr_cause); } /* Test that Clear Command cause codes affect the RR Channel Release cause code */ @@ -2323,7 +2355,7 @@ var octetstring l3 := '00010203040506'O; var RslChannelNr chan_nr := valueof(t_RslChanNr_Bm(6)); - f_ipa_tx(0, ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); + f_ipa_tx(ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); T.start; alt { @@ -2331,7 +2363,7 @@ setverdict(fail, "MSC received COMPL L3 for non-active lchan"); } [] BSSAP.receive {} - [] IPA_RSL[0].receive {} + [] IPA_RSL[0][0].receive {} [] T.timeout {} } @@ -2347,7 +2379,7 @@ chan_nr := f_chreq_act_ack() var octetstring l3 := '00010203040506'O; - f_ipa_tx(0, ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(1)), l3)); + f_ipa_tx(ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(1)), l3)); timer T := 2.0; T.start; @@ -2356,7 +2388,7 @@ setverdict(fail, "MSC received COMPL L3 for invalid SAPI 1"); } [] BSSAP.receive { repeat; } - [] IPA_RSL[0].receive { repeat; } + [] IPA_RSL[0][0].receive { repeat; } [] T.timeout {} } @@ -2372,7 +2404,7 @@ var RslChannelNr chan_nr := f_chreq_act_ack(); var octetstring l3 := '00010203040506'O; - f_ipa_tx(0, ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(3)), l3)); + f_ipa_tx(ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(3)), l3)); T.start; alt { @@ -2380,7 +2412,7 @@ setverdict(fail, "MSC received COMPL L3 for invalid SAPI 3"); } [] BSSAP.receive { repeat; } - [] IPA_RSL[0].receive { repeat; } + [] IPA_RSL[0][0].receive { repeat; } [] T.timeout {} } @@ -2396,7 +2428,7 @@ var RslChannelNr chan_nr := f_chreq_act_ack(); var octetstring l3 := '00010203040506'O; - f_ipa_tx(0, ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_SACCH(0)), l3)); + f_ipa_tx(ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_SACCH(0)), l3)); T.start; alt { @@ -2404,7 +2436,7 @@ setverdict(fail, "MSC received COMPL L3 for invalid Link SACCH"); } [] BSSAP.receive { repeat; } - [] IPA_RSL[0].receive { repeat; } + [] IPA_RSL[0][0].receive { repeat; } [] T.timeout {} } @@ -2521,16 +2553,16 @@ /* MSC sends some data on (not yet established) SAPI=3 link */ BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSAP_DTAP(rnd_data, '03'O))); /* BSC attempts to establish a SAPI=3 link on DCCH */ - rx_rsl := f_exp_ipa_rx(0, tr_RSL_EST_REQ(dt.rsl_chan_nr, tr_RslLinkID_DCCH(3))); + rx_rsl := f_exp_ipa_rx(tr_RSL_EST_REQ(dt.rsl_chan_nr, tr_RslLinkID_DCCH(3))); /* MS sends unexpected RELease INDication on SAPI=3 */ - f_ipa_tx(0, ts_RSL_REL_IND(dt.rsl_chan_nr, ts_RslLinkID_DCCH(3))); + f_ipa_tx(ts_RSL_REL_IND(dt.rsl_chan_nr, ts_RslLinkID_DCCH(3))); /* We expect to receive BSSMAP SAPI N Reject message from the BSC */ f_exp_sapi_n_reject(3, GSM0808_CAUSE_MS_NOT_EQUIPPED); /* Clean up the connection */ BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); - f_expect_chan_rel(0, dt.rsl_chan_nr, expect_rll_rel_req := false); + f_expect_chan_rel(dt.rsl_chan_nr, expect_rll_rel_req := false); f_shutdown_helper(); } @@ -2549,16 +2581,16 @@ /* MSC sends some data on (not yet established) SAPI=3 link */ BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSAP_DTAP(rnd_data, '03'O))); /* BSC attempts to establish a SAPI=3 link on DCCH */ - rx_rsl := f_exp_ipa_rx(0, tr_RSL_EST_REQ(dt.rsl_chan_nr, tr_RslLinkID_DCCH(3))); + rx_rsl := f_exp_ipa_rx(tr_RSL_EST_REQ(dt.rsl_chan_nr, tr_RslLinkID_DCCH(3))); /* BTS sends unexpected ERROR INDication on SAPI=3 */ - f_ipa_tx(0, ts_RSL_ERROR_IND(dt.rsl_chan_nr, ts_RslLinkID_DCCH(3), ''O)); + f_ipa_tx(ts_RSL_ERROR_IND(dt.rsl_chan_nr, ts_RslLinkID_DCCH(3), ''O)); /* We expect to receive BSSMAP SAPI N Reject message from the BSC */ f_exp_sapi_n_reject(3, GSM0808_CAUSE_BSS_NOT_EQUIPPED); /* Clean up the connection */ BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); - f_expect_chan_rel(0, dt.rsl_chan_nr, expect_rll_rel_req := false); + f_expect_chan_rel(dt.rsl_chan_nr, expect_rll_rel_req := false); f_shutdown_helper(); } @@ -2577,14 +2609,14 @@ /* MSC sends some data on (not yet established) SAPI=3 link */ BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSAP_DTAP(rnd_data, '03'O))); /* BSC attempts to establish a SAPI=3 link on DCCH */ - rx_rsl := f_exp_ipa_rx(0, tr_RSL_EST_REQ(dt.rsl_chan_nr, tr_RslLinkID_DCCH(3))); + rx_rsl := f_exp_ipa_rx(tr_RSL_EST_REQ(dt.rsl_chan_nr, tr_RslLinkID_DCCH(3))); /* MS does not respond, so the link establishment timeout triggers SAPI N Reject */ f_exp_sapi_n_reject(3, GSM0808_CAUSE_BSS_NOT_EQUIPPED, T_val := 8.0); /* Clean up the connection */ BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); - f_expect_chan_rel(0, dt.rsl_chan_nr, expect_rll_rel_req := false); + f_expect_chan_rel(dt.rsl_chan_nr, expect_rll_rel_req := false); f_shutdown_helper(); } @@ -2603,15 +2635,15 @@ /* MSC sends some data on (not yet established) SAPI=3 link */ BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSAP_DTAP(rnd_data, '03'O))); /* BSC attempts to establish a SAPI=3 link on DCCH */ - rx_rsl := f_exp_ipa_rx(0, tr_RSL_EST_REQ(dt.rsl_chan_nr, tr_RslLinkID_DCCH(3))); + rx_rsl := f_exp_ipa_rx(tr_RSL_EST_REQ(dt.rsl_chan_nr, tr_RslLinkID_DCCH(3))); /* MS sends unexpected ERROR INDication on DCCH/ACCH SAPI=3 */ - f_ipa_tx(0, ts_RSL_ERROR_IND(dt.rsl_chan_nr, ts_RslLinkID_DCCH(3), ''O)); + f_ipa_tx(ts_RSL_ERROR_IND(dt.rsl_chan_nr, ts_RslLinkID_DCCH(3), ''O)); f_exp_sapi_n_reject(3, GSM0808_CAUSE_BSS_NOT_EQUIPPED, '10'B); /* Clean up the connection */ BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); - f_expect_chan_rel(0, dt.rsl_chan_nr, expect_rll_rel_req := false); + f_expect_chan_rel(dt.rsl_chan_nr, expect_rll_rel_req := false); f_shutdown_helper(); } @@ -2680,7 +2712,7 @@ BSSAP.send(ts_BSSAP_DISC_req(dt.sccp_conn_id, 0)); } - f_expect_chan_rel(0, dt.rsl_chan_nr, expect_rll_rel_req := false, expect_cells := expect_cells); + f_expect_chan_rel(dt.rsl_chan_nr, expect_rll_rel_req := false, expect_cells := expect_cells); } for (var integer i := 1; i < total_earfcns; i := i + 1) { @@ -2835,11 +2867,10 @@ timer T := 30.0; T.start; alt { - [] IPA_RSL[rsl_idx].receive(tr_ASP_RSL_UD((tr_RSL_NO_BCCH_INFO, - tr_RSL_BCCH_INFO, - tr_RSL_NO_SACCH_FILL, - tr_RSL_SACCH_FILL)) - ) -> value rx_rsl_ud { + [] IPA_RSL[rsl_idx][0].receive(tr_ASP_RSL_UD((tr_RSL_NO_BCCH_INFO, + tr_RSL_BCCH_INFO, + tr_RSL_NO_SACCH_FILL, + tr_RSL_SACCH_FILL))) -> value rx_rsl_ud { f_sysinfo_seen(rsl_idx, rx_rsl_ud.rsl); if (g_system_information[rsl_idx].si1 == omit) { repeat; @@ -2848,7 +2879,7 @@ g_system_information[rsl_idx].si1 := omit; T.stop; } - [] IPA_RSL[rsl_idx].receive { repeat; } + [] IPA_RSL[rsl_idx][0].receive { repeat; } [] T.timeout { setverdict(fail, "Timeout receiving next SI1"); } } return last_si1; @@ -3036,18 +3067,32 @@ /* Verify correct stats on the number of configured and connected MSCs */ private function f_tc_stat_num_bts_connected_msc_connhdlr(integer expect_num_bts_connected) runs on MSC_ConnHdlr { - g_pars := f_gen_test_hdlr_pars(); + var integer num_trx_connected := 0; + var integer num_trx_total := 0; + + for (var integer i := 0; i < lengthof(c_BtsParams); i := i + 1) { + var integer trx_num := c_BtsParams[i].trx_num; + num_trx_total := num_trx_total + trx_num; + if (i < expect_num_bts_connected) { + num_trx_connected := num_trx_connected + trx_num; + } + } + var StatsDExpects expect := { { name := "TTCN3.bsc.0.num_bts.oml_connected", mtype := "g", min := expect_num_bts_connected, max := NUM_BTS_CFG }, { name := "TTCN3.bsc.0.num_bts.all_trx_rsl_connected", mtype := "g", min := expect_num_bts_connected, max := expect_num_bts_connected }, { name := "TTCN3.bsc.0.num_bts.total", mtype := "g", min := NUM_BTS_CFG, max := NUM_BTS_CFG }, - { name := "TTCN3.bsc.0.num_trx.rsl_connected", mtype := "g", min := expect_num_bts_connected, max := expect_num_bts_connected }, - { name := "TTCN3.bsc.0.num_trx.total", mtype := "g", min := NUM_BTS_CFG, max := NUM_BTS_CFG } + { name := "TTCN3.bsc.0.num_trx.rsl_connected", mtype := "g", min := num_trx_connected, max := num_trx_connected }, + { name := "TTCN3.bsc.0.num_trx.total", mtype := "g", min := num_trx_total, max := num_trx_total } }; + + g_pars := f_gen_test_hdlr_pars(); f_statsd_expect(expect); } private function f_tc_stat_num_bts_connected_test_ct(void_fn tc_fn, integer nr_bts) runs on test_CT { + var integer num_trx_connected := 0; + var integer num_trx_total := 0; var MSC_ConnHdlr vc_conn; f_init(nr_bts := nr_bts, handler_mode := true, nr_msc := 1); @@ -3055,30 +3100,43 @@ vc_conn := f_start_handler(tc_fn); vc_conn.done; + for (var integer i := 0; i < lengthof(c_BtsParams); i := i + 1) { + var integer trx_num := c_BtsParams[i].trx_num; + num_trx_total := num_trx_total + trx_num; + if (i < nr_bts) { + num_trx_connected := num_trx_connected + trx_num; + } + } + /* Also verify stat exposed on CTRL interface */ f_ctrl_get_exp(IPA_CTRL, "stat_item.last.bsc.0.num_bts:all_trx_rsl_connected", int2str(nr_bts)); f_ctrl_get_exp(IPA_CTRL, "stat_item.last.bsc.0.num_bts:total", int2str(NUM_BTS_CFG)); - f_ctrl_get_exp(IPA_CTRL, "stat_item.last.bsc.0.num_trx:rsl_connected", int2str(nr_bts)); - f_ctrl_get_exp(IPA_CTRL, "stat_item.last.bsc.0.num_trx:total", int2str(NUM_BTS_CFG)); + f_ctrl_get_exp(IPA_CTRL, "stat_item.last.bsc.0.num_trx:rsl_connected", int2str(num_trx_connected)); + f_ctrl_get_exp(IPA_CTRL, "stat_item.last.bsc.0.num_trx:total", int2str(num_trx_total)); /* Verify rf_states exposed on CTRL interface */ var charstring expect_net_rf_states := ""; for (var integer i := 0; i < NUM_BTS_CFG; i := i + 1) { - var charstring expect_bts_rf_states := int2str(i) & ",0,"; - if (i < NUM_BTS) { - /* In these tests, OML for the first NUM_BTS are always connected via osmo-bts-omldummy */ - expect_bts_rf_states := expect_bts_rf_states & "operational,unlocked,"; - } else { - /* For remaining i < NUM_BTS_CFG, OML is not connected, i.e. inoperational */ - expect_bts_rf_states := expect_bts_rf_states & "inoperational,locked,"; - } - /* The RF policy is still global in osmo-bsc, i.e. always "on" */ - expect_bts_rf_states := expect_bts_rf_states & "on,"; - if (i < nr_bts) { - /* For BTS where RSL is connected, the RSL state will be "up" */ - expect_bts_rf_states := expect_bts_rf_states & "rsl-up;"; - } else { - expect_bts_rf_states := expect_bts_rf_states & "rsl-down;"; + var charstring expect_bts_rf_states := ""; + + for (var integer j := 0; j < c_BtsParams[i].trx_num; j := j + 1) { + expect_bts_rf_states := expect_bts_rf_states & + int2str(i) & "," & int2str(j) & ","; + if (i < NUM_BTS) { + /* In these tests, OML for the first NUM_BTS are always connected via osmo-bts-omldummy */ + expect_bts_rf_states := expect_bts_rf_states & "operational,unlocked,"; + } else { + /* For remaining i < NUM_BTS_CFG, OML is not connected, i.e. inoperational */ + expect_bts_rf_states := expect_bts_rf_states & "inoperational,locked,"; + } + /* The RF policy is still global in osmo-bsc, i.e. always "on" */ + expect_bts_rf_states := expect_bts_rf_states & "on,"; + if (i < nr_bts) { + /* For BTS where RSL is connected, the RSL state will be "up" */ + expect_bts_rf_states := expect_bts_rf_states & "rsl-up;"; + } else { + expect_bts_rf_states := expect_bts_rf_states & "rsl-down;"; + } } f_ctrl_get_exp(IPA_CTRL, "bts." & int2str(i) & ".rf_states", expect_bts_rf_states); @@ -3213,7 +3271,7 @@ /* Clear the queue, it might still contain stuff like BCCH FILLING */ for (i := 0; i < NUM_BTS; i := i + 1) { - IPA_RSL[i].clear; + IPA_RSL[i][0].clear; } if (isvalue(rsl_chneed)) { @@ -3233,7 +3291,7 @@ } for (i := 0; i < sizeof(bts_ids); i := i + 1) { - rx_rsl := f_exp_ipa_rx(bts_ids[i], tr_RSL_PAGING_CMD(mi)); + rx_rsl := f_exp_ipa_rx(tr_RSL_PAGING_CMD(mi), idx := {bts_ids[i], 0}); /* check channel type, paging group */ if (rx_rsl.ies[1].body.paging_group != paging_group) { setverdict(fail, "Paging for wrong paging group"); @@ -3252,10 +3310,10 @@ } T.start; alt { - [] IPA_RSL[i].receive(tr_ASP_RSL_UD(tr_RSL_PAGING_CMD(mi))) { + [] IPA_RSL[i][0].receive(tr_ASP_RSL_UD(tr_RSL_PAGING_CMD(mi))) { setverdict(fail, "Paging on BTS ", i, " which is not part of ", bts_ids); } - [] IPA_RSL[i].receive { repeat; } + [] IPA_RSL[i][0].receive { repeat; } [] T.timeout { } } } @@ -3419,22 +3477,22 @@ f_pageing_helper('001010123456789'H, cid_list, c_BtsId_all); /* tell BSC there is no paging space anymore */ - f_ipa_tx(0, ts_RSL_PAGING_LOAD_IND(0)); + f_ipa_tx(ts_RSL_PAGING_LOAD_IND(0)); f_sleep(0.2); - IPA_RSL[0].clear; + IPA_RSL[0][0].clear; /* Wait for 4 seconds if any more PAGING CMD are received on RSL. Normally, * there would be 8 retransmissions during 4 seconds */ T.start; T_retrans.start; alt { - [] IPA_RSL[0].receive(tr_ASP_RSL_UD(tr_RSL_PAGING_CMD(?))) { + [] IPA_RSL[0][0].receive(tr_ASP_RSL_UD(tr_RSL_PAGING_CMD(?))) { setverdict(fail, "Received PAGING after LOAD_IND(0)"); mtc.stop; } [] T_retrans.timeout { /* re-trnsmit the zero-space LOAD IND to avoid BSC 'auto credit' */ - f_ipa_tx(0, ts_RSL_PAGING_LOAD_IND(0)); + f_ipa_tx(ts_RSL_PAGING_LOAD_IND(0)); T_retrans.start; repeat; } @@ -3512,21 +3570,21 @@ /* Clear the queue, it might still contain stuff like BCCH FILLING */ for (var integer i := 0; i < sizeof(IPA_RSL); i := i+1) { - IPA_RSL[i].clear; + IPA_RSL[i][0].clear; } /* Wait for 3 seconds if any more PAGING CMD are received on RSL */ T.start; alt { - [] IPA_RSL[0].receive(tr_ASP_RSL_UD(tr_RSL_PAGING_CMD(?))) { + [] IPA_RSL[0][0].receive(tr_ASP_RSL_UD(tr_RSL_PAGING_CMD(?))) { setverdict(fail, "Received PAGING after A-RESET"); mtc.stop; } - [] IPA_RSL[1].receive(tr_ASP_RSL_UD(tr_RSL_PAGING_CMD(?))) { + [] IPA_RSL[1][0].receive(tr_ASP_RSL_UD(tr_RSL_PAGING_CMD(?))) { setverdict(fail, "Received PAGING after A-RESET"); mtc.stop; } - [] IPA_RSL[2].receive(tr_ASP_RSL_UD(tr_RSL_PAGING_CMD(?))) { + [] IPA_RSL[2][0].receive(tr_ASP_RSL_UD(tr_RSL_PAGING_CMD(?))) { setverdict(fail, "Received PAGING after A-RESET"); mtc.stop; } @@ -3557,9 +3615,10 @@ /* Send CHAN RQD and wait for allocation; acknowledge it */ dt.rsl_chan_nr := f_chreq_act_ack(); + dt.idx := {0, 0}; /* Send unsolicited Paging response (no matching Paging CMD stored in BSC) */ - f_ipa_tx(0, ts_RSL_EST_IND(dt.rsl_chan_nr, valueof(ts_RslLinkID_DCCH(0)), enc_PDU_ML3_MS_NW(l3))); + f_ipa_tx(ts_RSL_EST_IND(dt.rsl_chan_nr, valueof(ts_RslLinkID_DCCH(0)), enc_PDU_ML3_MS_NW(l3))); /* Expevct a CR with a matching Paging response on the A-Interface */ @@ -3600,10 +3659,10 @@ f_init(1, guard_timeout := 100.0); /* Clear the queue, it might still contain stuff like BCCH FILLING */ - IPA_RSL[0].clear; + IPA_RSL[0][0].clear; if (send_pag_load_ind) { /* Tell there's plenty of space at the BTS (UINT16_MAX): */ - f_ipa_tx(0, ts_RSL_PAGING_LOAD_IND(65535)); + f_ipa_tx(ts_RSL_PAGING_LOAD_IND(65535)); } for (i := 0; i < num_subscribers; i := i + 1) { @@ -3616,7 +3675,7 @@ T_rx.start; T_load_ind.start; alt { - [] IPA_RSL[0].receive(tr_ASP_RSL_UD(tr_RSL_PAGING_CMD(?), IPAC_PROTO_RSL_TRX0)) -> value rx_rsl_ud { + [] IPA_RSL[0][0].receive(tr_ASP_RSL_UD(tr_RSL_PAGING_CMD(?), IPAC_PROTO_RSL_TRX0)) -> value rx_rsl_ud { var hexstring imsi := rx_rsl_ud.rsl.ies[2].body.ms_identity.mobileIdentityV.oddEvenInd_identity.imsi.digits; var hexstring imsi_suffix := substr(imsi, lengthof(imsi)-6, 6); var charstring imsi_str := hex2str(imsi_suffix); @@ -3632,11 +3691,11 @@ repeat; } } - [] IPA_RSL[0].receive { repeat; } + [] IPA_RSL[0][0].receive { repeat; } [] T_load_ind.timeout { log("[CCH Load Ind timer] received paging requests so far: ", rx_paging_num); if (send_pag_load_ind) { - f_ipa_tx(0, ts_RSL_PAGING_LOAD_IND(40)); + f_ipa_tx(ts_RSL_PAGING_LOAD_IND(40)); } T_load_ind.start; repeat; @@ -3672,7 +3731,7 @@ rsl_fail := f_ctrl_get_ratectr_abs(IPA_CTRL, "bts", 0, "rsl_fail"); - f_ipa_rsl_stop(bts[0].rsl); + f_ipa_rsl_stop(bts[0][0].rsl); f_ctrl_get_exp_ratectr_abs(IPA_CTRL, "bts", 0, "rsl_fail", rsl_fail+1); @@ -3683,31 +3742,32 @@ /* The body of TC_rsl_unknown_unit_id() and TC_oml_unknown_unit_id() tests. */ function f_ipa_unknown_unit_id(integer mp_bsc_ipa_port) runs on test_CT return boolean { + var IPA_Client client; timer T := 10.0; - bts[0].rsl.id := "IPA-0-RSL"; - bts[0].rsl.vc_IPA := IPA_Emulation_CT.create(bts[0].rsl.id & "-IPA") alive; - bts[0].rsl.ccm_pars := c_IPA_default_ccm_pars; - bts[0].rsl.ccm_pars.name := "Osmocom TTCN-3 BTS Simulator"; - bts[0].rsl.ccm_pars.unit_id := "99/0/0"; /* value which is unknown at BTS */ + client.id := "IPA-BTS0-TRX0-RSL"; + client.vc_IPA := IPA_Emulation_CT.create(client.id & "-IPA") alive; + client.ccm_pars := c_IPA_default_ccm_pars; + client.ccm_pars.name := "Osmocom TTCN-3 BTS Simulator"; + client.ccm_pars.unit_id := "99/0/0"; /* value which is unknown at BTS */ f_ipa_ctrl_start_client(mp_bsc_ip, mp_bsc_ctrl_port); f_init_mgcp("VirtMSC"); /* start RSL/OML connection (XXX re-uses RSL port/protocol definitions for OML) */ - map(bts[0].rsl.vc_IPA:IPA_PORT, system:IPA); - connect(bts[0].rsl.vc_IPA:IPA_RSL_PORT, self:IPA_RSL[0]); - bts[0].rsl.vc_IPA.start(IPA_Emulation.main_client(mp_bsc_ip, mp_bsc_ipa_port, "", 10000, bts[0].rsl.ccm_pars)); + map(client.vc_IPA:IPA_PORT, system:IPA); + connect(client.vc_IPA:IPA_RSL_PORT, self:IPA_RSL[0][0]); + client.vc_IPA.start(IPA_Emulation.main_client(mp_bsc_ip, mp_bsc_ipa_port, "", 10000, client.ccm_pars)); /* wait for IPA OML link to connect and then disconnect */ T.start; alt { - [] IPA_RSL[0].receive(tr_ASP_IPA_EV(ASP_IPA_EVENT_DOWN)) { + [] IPA_RSL[0][0].receive(tr_ASP_IPA_EV(ASP_IPA_EVENT_DOWN)) { T.stop; return true; } - [] IPA_RSL[0].receive { repeat } + [] IPA_RSL[0][0].receive { repeat } [] T.timeout { return false; } @@ -3748,19 +3808,20 @@ type function void_fn(charstring id) runs on MSC_ConnHdlr; -/* helper function to create and connect a MSC_ConnHdlr component */ +/* helper function to create and connect a MSC_ConnHdlr component + * TODO: allow connecting to TRX1..N, not only TRX0 */ private function f_connect_handler(inout MSC_ConnHdlr vc_conn, integer bssap_idx := 0) runs on test_CT { connect(vc_conn:RAN, g_bssap[bssap_idx].vc_RAN:PROC); connect(vc_conn:MGCP_PROC, vc_MGCP:MGCP_PROC); - connect(vc_conn:RSL, bts[0].rsl.vc_RSL:CLIENT_PT); - connect(vc_conn:RSL_PROC, bts[0].rsl.vc_RSL:RSL_PROC); - if (isvalue(bts[1])) { - connect(vc_conn:RSL1, bts[1].rsl.vc_RSL:CLIENT_PT); - connect(vc_conn:RSL1_PROC, bts[1].rsl.vc_RSL:RSL_PROC); + connect(vc_conn:RSL, bts[0][0].rsl.vc_RSL:CLIENT_PT); + connect(vc_conn:RSL_PROC, bts[0][0].rsl.vc_RSL:RSL_PROC); + if (isvalue(bts[1][0])) { + connect(vc_conn:RSL1, bts[1][0].rsl.vc_RSL:CLIENT_PT); + connect(vc_conn:RSL1_PROC, bts[1][0].rsl.vc_RSL:RSL_PROC); } - if (isvalue(bts[2])) { - connect(vc_conn:RSL2, bts[2].rsl.vc_RSL:CLIENT_PT); - connect(vc_conn:RSL2_PROC, bts[2].rsl.vc_RSL:RSL_PROC); + if (isvalue(bts[2][0])) { + connect(vc_conn:RSL2, bts[2][0].rsl.vc_RSL:CLIENT_PT); + connect(vc_conn:RSL2_PROC, bts[2][0].rsl.vc_RSL:RSL_PROC); } connect(vc_conn:BSSAP, g_bssap[bssap_idx].vc_RAN:CLIENT); if (mp_enable_lcs_tests) { @@ -5127,8 +5188,8 @@ f_disable_all_sdcch(); /* RA containing reason=LU */ - f_ipa_tx(0, ts_RSL_CHAN_RQD('02'O, 2342)); - rsl_msg := f_exp_ipa_rx(0, tr_RSL_IMM_ASSIGN(0)); + f_ipa_tx(ts_RSL_CHAN_RQD('02'O, 2342)); + rsl_msg := f_exp_ipa_rx(tr_RSL_IMM_ASSIGN(0)); rr := dec_GsmRrMessage(rsl_msg.ies[1].body.full_imm_ass_info.payload); if (rr.header.message_type != IMMEDIATE_ASSIGNMENT_REJECT) { setverdict(fail, "Expected reject"); @@ -5446,7 +5507,7 @@ rr_ho_cmpl_seen := false, handover_done := false, old_chan_nr := -, - expect_target_tsc := BTS_TSC[1] + expect_target_tsc := c_BtsParams[1].tsc }; /* issue hand-over command on VTY, from BTS 0 to BTS 1 */ f_vty_handover(BSCVTY, 0, 0, g_chan_nr, 1); @@ -5476,7 +5537,7 @@ * g_chan_nr to the new lchan that was handed over to. It lives in bts 1, so look it up at RSL1_PROC. */ f_verify_encr_info(chan_act); - f_chan_act_verify_tsc(chan_act, BTS_TSC[1]); + f_chan_act_verify_tsc(chan_act, c_BtsParams[1].tsc); f_perform_clear(RSL1, RSL1_PROC); @@ -5489,7 +5550,7 @@ f_init(2, true); f_sleep(1.0); - pars.expect_tsc := BTS_TSC[0]; + pars.expect_tsc := c_BtsParams[0].tsc; f_ctrs_bsc_and_bts_handover_init(); @@ -5571,7 +5632,7 @@ rr_ho_cmpl_seen := false, handover_done := false, old_chan_nr := -, - expect_target_tsc := BTS_TSC[1] + expect_target_tsc := c_BtsParams[1].tsc }; /* issue hand-over command on VTY */ f_vty_handover(BSCVTY, 0, 0, g_chan_nr, 1); @@ -6073,7 +6134,7 @@ var RslChannelNr new_chan_nr := valueof(t_RslChanNr0(1, RSL_CHAN_NR_Bm_ACCH)); f_rslem_register(0, new_chan_nr); g_chan_nr := new_chan_nr; - var uint3_t expect_target_tsc := BTS_TSC[0]; + var uint3_t expect_target_tsc := c_BtsParams[0].tsc; f_sleep(1.0); f_create_mgcp_expect(ExpectCriteria:{omit,omit,omit}); @@ -6984,7 +7045,7 @@ f_bts_0_cfg(BSCVTY, {"no neighbors"}); f_probe_for_handover("1.a", "HO to bts 1 works, implicitly listed as neighbor (legacy behavior when none are configured)", "handover any to arfcn 871 bsic 11", - true, expect_target_tsc := BTS_TSC[1]); + true, expect_target_tsc := c_BtsParams[1].tsc); f_probe_for_handover("1.b", "HO to unknown cell does not start", "handover any to arfcn 13 bsic 39", @@ -6996,7 +7057,7 @@ f_probe_for_handover("1.d", "HO to 871-11 still works (verify that this test properly cleans up)", "handover any to arfcn 871 bsic 11", - true, expect_target_tsc := BTS_TSC[1]); + true, expect_target_tsc := c_BtsParams[1].tsc); f_perform_clear(); } @@ -7058,7 +7119,7 @@ f_probe_for_handover("2.a", "HO to bts 1 works, explicitly listed as neighbor", "handover any to arfcn 871 bsic 11", - true, expect_target_tsc := BTS_TSC[1]); + true, expect_target_tsc := c_BtsParams[1].tsc); f_probe_for_handover("2.b", "HO to bts 2 doesn't work, not listed as neighbor", "handover any to arfcn 871 bsic 12", @@ -7114,7 +7175,7 @@ false); f_probe_for_handover("3.b", "HO to bts 2 works, explicitly listed as neighbor; no ambiguity because bts 3 is not listed as neighbor", "handover any to arfcn 871 bsic 12", - true, expect_target_tsc := BTS_TSC[2]); + true, expect_target_tsc := c_BtsParams[2].tsc); f_perform_clear(); } testcase TC_ho_neighbor_config_3() runs on test_CT { @@ -7306,7 +7367,7 @@ f_probe_for_handover("7.a", "HO to 871-12 does HO to bts 2", "handover any to arfcn 871 bsic 12", - true, expect_target_tsc := BTS_TSC[2]); + true, expect_target_tsc := c_BtsParams[2].tsc); f_probe_for_handover("7.b", "HO to 123-45 triggers inter-BSC HO", "handover any to arfcn 123 bsic 45", true, true); @@ -7421,7 +7482,7 @@ BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(cause))); /* expect BSC to disable the channel */ - f_exp_chan_rel_and_clear(dt, 0); + f_exp_chan_rel_and_clear(dt); } /* In the buggy behavior, a timeout of 2 seconds happens between above @@ -7464,7 +7525,7 @@ dt := f_est_dchan('23'O, 23, '00010203040506'O); /* simulate RLL REL IND */ - f_ipa_tx(0, ts_RSL_REL_IND(dt.rsl_chan_nr, valueof(ts_RslLinkID_DCCH(0)))); + f_ipa_tx(ts_RSL_REL_IND(dt.rsl_chan_nr, valueof(ts_RslLinkID_DCCH(0)))); /* expect Clear Request on MSC side */ BSSAP.receive(tr_BSSAP_DATA_ind(dt.sccp_conn_id, tr_BSSMAP_ClearRequest)) -> value rx_di; @@ -7474,7 +7535,7 @@ BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(cause))); /* expect BSC to disable the channel */ - f_exp_chan_rel_and_clear(dt, 0); + f_exp_chan_rel_and_clear(dt); } /* In the buggy behavior, a timeout of 2 seconds happens between above @@ -7498,12 +7559,12 @@ /* ask BSC via VTY to activate a given IPA style chan as PDCH */ f_vty_ts_action("pdch activate", bts_nr, trx_nr, ts_nr); /* expect the BSC to issue the related RSL command */ - rsl_unused := f_exp_ipa_rx(0, tr_RSL_IPA_PDCH_ACT(chan_nr)); + rsl_unused := f_exp_ipa_rx(tr_RSL_IPA_PDCH_ACT(chan_nr)); if (istemplatekind(nack, "omit")) { /* respond with a related acknowledgement */ - f_ipa_tx(0, ts_RSL_IPA_PDCH_ACT_ACK(chan_nr, ts_RSL_IE_FrameNumber(2342))); + f_ipa_tx(ts_RSL_IPA_PDCH_ACT_ACK(chan_nr, ts_RSL_IE_FrameNumber(2342))); } else { - f_ipa_tx(0, ts_RSL_IPA_PDCH_ACT_NACK(chan_nr, valueof(nack))); + f_ipa_tx(ts_RSL_IPA_PDCH_ACT_NACK(chan_nr, valueof(nack))); } } @@ -7515,12 +7576,12 @@ /* ask BSC via VTY to activate a given IPA style chan as PDCH */ f_vty_ts_action("pdch deactivate", bts_nr, trx_nr, ts_nr); /* expect the BSC to issue the related RSL command */ - rsl_unused := f_exp_ipa_rx(0, tr_RSL_IPA_PDCH_DEACT(chan_nr)); + rsl_unused := f_exp_ipa_rx(tr_RSL_IPA_PDCH_DEACT(chan_nr)); if (istemplatekind(nack, "omit")) { /* respond with a related acknowledgement */ - f_ipa_tx(0, ts_RSL_IPA_PDCH_DEACT_ACK(chan_nr)); + f_ipa_tx(ts_RSL_IPA_PDCH_DEACT_ACK(chan_nr)); } else { - f_ipa_tx(0, ts_RSL_IPA_PDCH_DEACT_NACK(chan_nr, valueof(nack))); + f_ipa_tx(ts_RSL_IPA_PDCH_DEACT_NACK(chan_nr, valueof(nack))); } } @@ -7579,8 +7640,8 @@ log("TCH/F_PDCH pchan starts out in TCH/F mode:"); f_ts_dyn_mode_assert(0, 0, chan_nr.tn, TCHF_MODE); /* The BSC will activate the dynamic PDCH by default, so confirm that */ - rsl_unused := f_exp_ipa_rx(0, tr_RSL_IPA_PDCH_ACT(chan_nr)); - f_ipa_tx(0, ts_RSL_IPA_PDCH_ACT_ACK(chan_nr, ts_RSL_IE_FrameNumber(2342))); + rsl_unused := f_exp_ipa_rx(tr_RSL_IPA_PDCH_ACT(chan_nr)); + f_ipa_tx(ts_RSL_IPA_PDCH_ACT_ACK(chan_nr, ts_RSL_IE_FrameNumber(2342))); f_sleep(1.0); log("TCH/F_PDCH pchan, PDCH ACT was ACKed, so now in PDCH mode:"); f_ts_dyn_mode_assert(0, 0, chan_nr.tn, PDCH_MODE); @@ -7625,8 +7686,8 @@ f_ts_dyn_mode_assert(0, 0, chan_nr.tn, TCHF_MODE); /* The BSC will activate the dynamic PDCH by default, so confirm that */ - rsl_unused := f_exp_ipa_rx(0, tr_RSL_IPA_PDCH_ACT(chan_nr)); - f_ipa_tx(0, ts_RSL_IPA_PDCH_ACT_ACK(chan_nr, ts_RSL_IE_FrameNumber(2342))); + rsl_unused := f_exp_ipa_rx(tr_RSL_IPA_PDCH_ACT(chan_nr)); + f_ipa_tx(ts_RSL_IPA_PDCH_ACT_ACK(chan_nr, ts_RSL_IE_FrameNumber(2342))); f_sleep(1.0); f_ts_dyn_mode_assert(0, 0, chan_nr.tn, PDCH_MODE); @@ -7659,12 +7720,12 @@ /* ask BSC via VTY to activate a given OSMO style chan as PDCH */ /* FIXME: no VTY command to activate Osmocom PDCH !! */ /* expect the BSC to issue the related RSL command */ - rsl_unused := f_exp_ipa_rx(0, tr_RSL_CHAN_ACT(chan_nr, ?)); + rsl_unused := f_exp_ipa_rx(tr_RSL_CHAN_ACT(chan_nr, ?)); if (istemplatekind(nack, "omit")) { /* respond with a related acknowledgement */ - f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(chan_nr, 2342)); + f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, 2342)); } else { - f_ipa_tx(0, ts_RSL_CHAN_ACT_NACK(chan_nr, valueof(nack))); + f_ipa_tx(ts_RSL_CHAN_ACT_NACK(chan_nr, valueof(nack))); } } @@ -7676,12 +7737,12 @@ /* ask BSC via VTY to activate a given OSMO style chan as PDCH */ /* FIXME: no VTY command to activate Osmocom PDCH !! */ /* expect the BSC to issue the related RSL command */ - rsl_unused := f_exp_ipa_rx(0, tr_RSL_RF_CHAN_REL(chan_nr)); + rsl_unused := f_exp_ipa_rx(tr_RSL_RF_CHAN_REL(chan_nr)); if (istemplatekind(nack, "omit")) { /* respond with a related acknowledgement */ - f_ipa_tx(0, ts_RSL_RF_CHAN_REL_ACK(chan_nr)); + f_ipa_tx(ts_RSL_RF_CHAN_REL_ACK(chan_nr)); } else { - //f_ipa_tx(0, ts_RSL_RF_CHAN_REL_NACK(chan_nr, valueof(nack))); + //f_ipa_tx(ts_RSL_RF_CHAN_REL_NACK(chan_nr, valueof(nack))); } } @@ -7702,9 +7763,9 @@ log("TCH/F_TCH/H_PDCH pchan starts out in disabled mode:"); f_ts_dyn_mode_assert(0, 0, chan_nr.tn, NONE_MODE); /* The BSC will activate the dynamic PDCH by default, so confirm that */ - rsl_unused := f_exp_ipa_rx(0, tr_RSL_CHAN_ACT_PDCH(chan_nr)); + rsl_unused := f_exp_ipa_rx(tr_RSL_CHAN_ACT_PDCH(chan_nr)); - f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(chan_nr, 2342)); + f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, 2342)); f_sleep(1.0); log("TCH/F_TCH/H_PDCH requested to PDCH ACT on startup, which was ACKed, so now in PDCH:"); f_ts_dyn_mode_assert(0, 0, chan_nr.tn, PDCH_MODE); @@ -7731,10 +7792,10 @@ f_ts_dyn_mode_assert(0, 0, chan_nr.tn, NONE_MODE); /* The BSC will activate the dynamic PDCH by default, so confirm that */ - rsl_unused := f_exp_ipa_rx(0, tr_RSL_CHAN_ACT_PDCH(chan_nr)); + rsl_unused := f_exp_ipa_rx(tr_RSL_CHAN_ACT_PDCH(chan_nr)); /* NACK this activation and expect the "show timeslot" mode still to be NONE */ - f_ipa_tx(0, ts_RSL_CHAN_ACT_NACK(chan_nr, RSL_ERR_EQUIPMENT_FAIL)); + f_ipa_tx(ts_RSL_CHAN_ACT_NACK(chan_nr, RSL_ERR_EQUIPMENT_FAIL)); f_sleep(1.0); f_ts_dyn_mode_assert(0, 0, chan_nr.tn, NONE_MODE); @@ -7763,9 +7824,9 @@ log("TCH/F_TCH/H_SDCCH8_PDCH pchan starts out in disabled mode:"); f_ts_dyn_mode_assert(0, 0, pdch_chan_nr.tn, NONE_MODE); /* The BSC will activate the dynamic PDCH by default, so confirm that */ - rsl_unused := f_exp_ipa_rx(0, tr_RSL_CHAN_ACT_PDCH(pdch_chan_nr)); + rsl_unused := f_exp_ipa_rx(tr_RSL_CHAN_ACT_PDCH(pdch_chan_nr)); - f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(pdch_chan_nr, 2342)); + f_ipa_tx(ts_RSL_CHAN_ACT_ACK(pdch_chan_nr, 2342)); f_sleep(1.0); log("TCH/F_TCH/H_SDCCH8_PDC requested to PDCH ACT on startup, which was ACKed, so now in PDCH:"); f_ts_dyn_mode_assert(0, 0, pdch_chan_nr.tn, PDCH_MODE); @@ -7780,19 +7841,20 @@ } /* Now the dyn ts is selected. First PDCH is released, then sdcch chan is activated */ - f_ipa_tx(0, ts_RSL_CHAN_RQD(int2oct(oct2int('23'O) + i, 1), 2342)); - rsl_unused := f_exp_ipa_rx(0, tr_RSL_RF_CHAN_REL(pdch_chan_nr)); - f_ipa_tx(0, ts_RSL_RF_CHAN_REL_ACK(pdch_chan_nr)); + f_ipa_tx(ts_RSL_CHAN_RQD(int2oct(oct2int('23'O) + i, 1), 2342)); + rsl_unused := f_exp_ipa_rx(tr_RSL_RF_CHAN_REL(pdch_chan_nr)); + f_ipa_tx(ts_RSL_RF_CHAN_REL_ACK(pdch_chan_nr)); - rsl_msg := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); + rsl_msg := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); dt.rsl_chan_nr := rsl_msg.ies[0].body.chan_nr; + dt.idx := {0, 0}; f_ts_dyn_mode_assert(0, 0, dt.rsl_chan_nr.tn, SDCCH8_MODE); - f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(dt.rsl_chan_nr, 2342)); - rsl_msg := f_exp_ipa_rx(0, tr_RSL_IMM_ASSIGN(0)); + f_ipa_tx(ts_RSL_CHAN_ACT_ACK(dt.rsl_chan_nr, 2342)); + rsl_msg := f_exp_ipa_rx(tr_RSL_IMM_ASSIGN(0)); f_ts_dyn_mode_assert(0, 0, dt.rsl_chan_nr.tn, SDCCH8_MODE); - f_ipa_tx(0, ts_RSL_EST_IND(dt.rsl_chan_nr, valueof(ts_RslLinkID_DCCH(0)), '1234'O)); + f_ipa_tx(ts_RSL_EST_IND(dt.rsl_chan_nr, valueof(ts_RslLinkID_DCCH(0)), '1234'O)); BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3('1234'O))) -> value rx_c_ind; dt.sccp_conn_id := rx_c_ind.connectionId; BSSAP.send(ts_BSSAP_CONNECT_res(dt.sccp_conn_id)); @@ -7800,11 +7862,11 @@ /* Instruct BSC to clear channel */ var BssmapCause cause := 0; BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(cause))); - f_exp_chan_rel_and_clear(dt, 0); + f_exp_chan_rel_and_clear(dt); /* The BSC will switch the TS back to PDCH once the only lchan using it is released: */ - rsl_unused := f_exp_ipa_rx(0, tr_RSL_CHAN_ACT_PDCH(pdch_chan_nr)); - f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(pdch_chan_nr, 2342)); + rsl_unused := f_exp_ipa_rx(tr_RSL_CHAN_ACT_PDCH(pdch_chan_nr)); + f_ipa_tx(ts_RSL_CHAN_ACT_ACK(pdch_chan_nr, 2342)); f_sleep(1.0); f_ts_dyn_mode_assert(0, 0, pdch_chan_nr.tn, PDCH_MODE); @@ -7840,8 +7902,8 @@ /* The dyn TS want to activate PDCH mode, ACK that. */ var RslChannelNr chan_nr; chan_nr := valueof(t_RslChanNr_PDCH(2)); - f_exp_ipa_rx(0, tr_RSL_CHAN_ACT_PDCH(chan_nr)); - f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(chan_nr, 2342)); + f_exp_ipa_rx(tr_RSL_CHAN_ACT_PDCH(chan_nr)); + f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, 2342)); f_sleep(1.0); @@ -7900,9 +7962,9 @@ log("TCH/F_TCH/H_SDCCH8_PDCH pchan starts out in disabled mode:"); f_ts_dyn_mode_assert(0, 0, pdch_chan_nr.tn, NONE_MODE); /* The BSC will activate the dynamic PDCH by default, so confirm that */ - rsl_unused := f_exp_ipa_rx(0, tr_RSL_CHAN_ACT_PDCH(pdch_chan_nr)); + rsl_unused := f_exp_ipa_rx(tr_RSL_CHAN_ACT_PDCH(pdch_chan_nr)); - f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(pdch_chan_nr, 2342)); + f_ipa_tx(ts_RSL_CHAN_ACT_ACK(pdch_chan_nr, 2342)); f_sleep(1.0); log("TCH/F_TCH/H_SDCCH8_PDC requested to PDCH ACT on startup, which was ACKed, so now in PDCH:"); f_ts_dyn_mode_assert(0, 0, pdch_chan_nr.tn, PDCH_MODE); @@ -7917,19 +7979,20 @@ } /* Now the dyn ts is selected. First PDCH is released, then TCH chan is activated */ - f_ipa_tx(0, ts_RSL_CHAN_RQD(int2oct(oct2int(ra) + i, 1), 2342)); - rsl_unused := f_exp_ipa_rx(0, tr_RSL_RF_CHAN_REL(pdch_chan_nr)); - f_ipa_tx(0, ts_RSL_RF_CHAN_REL_ACK(pdch_chan_nr)); + f_ipa_tx(ts_RSL_CHAN_RQD(int2oct(oct2int(ra) + i, 1), 2342)); + rsl_unused := f_exp_ipa_rx(tr_RSL_RF_CHAN_REL(pdch_chan_nr)); + f_ipa_tx(ts_RSL_RF_CHAN_REL_ACK(pdch_chan_nr)); - rsl_msg := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); + rsl_msg := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); dt.rsl_chan_nr := rsl_msg.ies[0].body.chan_nr; + dt.idx := {0, 0}; f_ts_dyn_mode_assert(0, 0, dt.rsl_chan_nr.tn, TCHH_MODE); - f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(dt.rsl_chan_nr, 2342)); - rsl_msg := f_exp_ipa_rx(0, tr_RSL_IMM_ASSIGN(0)); + f_ipa_tx(ts_RSL_CHAN_ACT_ACK(dt.rsl_chan_nr, 2342)); + rsl_msg := f_exp_ipa_rx(tr_RSL_IMM_ASSIGN(0)); f_ts_dyn_mode_assert(0, 0, dt.rsl_chan_nr.tn, TCHH_MODE); - f_ipa_tx(0, ts_RSL_EST_IND(dt.rsl_chan_nr, valueof(ts_RslLinkID_DCCH(0)), '1234'O)); + f_ipa_tx(ts_RSL_EST_IND(dt.rsl_chan_nr, valueof(ts_RslLinkID_DCCH(0)), '1234'O)); BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3('1234'O))) -> value rx_c_ind; dt.sccp_conn_id := rx_c_ind.connectionId; BSSAP.send(ts_BSSAP_CONNECT_res(dt.sccp_conn_id)); @@ -7937,11 +8000,11 @@ /* Instruct BSC to clear channel */ var BssmapCause cause := 0; BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(cause))); - f_exp_chan_rel_and_clear(dt, 0); + f_exp_chan_rel_and_clear(dt); /* The BSC will switch the TS back to PDCH once the only lchan using it is released: */ - rsl_unused := f_exp_ipa_rx(0, tr_RSL_CHAN_ACT_PDCH(pdch_chan_nr)); - f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(pdch_chan_nr, 2342)); + rsl_unused := f_exp_ipa_rx(tr_RSL_CHAN_ACT_PDCH(pdch_chan_nr)); + f_ipa_tx(ts_RSL_CHAN_ACT_ACK(pdch_chan_nr, 2342)); f_sleep(1.0); f_ts_dyn_mode_assert(0, 0, pdch_chan_nr.tn, PDCH_MODE); @@ -7977,9 +8040,9 @@ log("TCH/F_TCH/H_SDCCH8_PDCH pchan starts out in disabled mode:"); f_ts_dyn_mode_assert(0, 0, pdch_chan_nr.tn, NONE_MODE); /* The BSC will activate the dynamic PDCH by default, so confirm that */ - rsl_unused := f_exp_ipa_rx(0, tr_RSL_CHAN_ACT_PDCH(pdch_chan_nr)); + rsl_unused := f_exp_ipa_rx(tr_RSL_CHAN_ACT_PDCH(pdch_chan_nr)); - f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(pdch_chan_nr, 2342)); + f_ipa_tx(ts_RSL_CHAN_ACT_ACK(pdch_chan_nr, 2342)); f_sleep(1.0); log("TCH/F_TCH/H_SDCCH8_PDC requested to PDCH ACT on startup, which was ACKed, so now in PDCH:"); f_ts_dyn_mode_assert(0, 0, pdch_chan_nr.tn, PDCH_MODE); @@ -7994,16 +8057,17 @@ } /* Now the dyn ts is selected. First PDCH is released, then sdcch chan is activated */ - f_ipa_tx(0, ts_RSL_CHAN_RQD(int2oct(oct2int('23'O) + i, 1), 2342)); - rsl_unused := f_exp_ipa_rx(0, tr_RSL_RF_CHAN_REL(pdch_chan_nr)); - f_ipa_tx(0, ts_RSL_RF_CHAN_REL_ACK(pdch_chan_nr)); + f_ipa_tx(ts_RSL_CHAN_RQD(int2oct(oct2int('23'O) + i, 1), 2342)); + rsl_unused := f_exp_ipa_rx(tr_RSL_RF_CHAN_REL(pdch_chan_nr)); + f_ipa_tx(ts_RSL_RF_CHAN_REL_ACK(pdch_chan_nr)); - rsl_msg := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); + rsl_msg := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); dt.rsl_chan_nr := rsl_msg.ies[0].body.chan_nr; + dt.idx := {0, 0}; f_ts_dyn_mode_assert(0, 0, dt.rsl_chan_nr.tn, SDCCH8_MODE); - f_ipa_tx(0, ts_RSL_CHAN_ACT_NACK(dt.rsl_chan_nr, RSL_ERR_EQUIPMENT_FAIL)); - rsl_msg := f_exp_ipa_rx(0, tr_RSL_IMM_ASSIGN(0)); + f_ipa_tx(ts_RSL_CHAN_ACT_NACK(dt.rsl_chan_nr, RSL_ERR_EQUIPMENT_FAIL)); + rsl_msg := f_exp_ipa_rx(tr_RSL_IMM_ASSIGN(0)); rr := dec_GsmRrMessage(rsl_msg.ies[1].body.full_imm_ass_info.payload); if (rr.header.message_type != IMMEDIATE_ASSIGNMENT_REJECT) { Misc_Helpers.f_shutdown(__BFILE__, __LINE__, fail, "Expected reject"); @@ -8012,8 +8076,8 @@ /* FIXME? Currently the TS stays in state BORKEN: */ /* The BSC will switch the TS back to PDCH once the only lchan using it is released: */ - /* rsl_unused := f_exp_ipa_rx(0, tr_RSL_CHAN_ACT_PDCH(pdch_chan_nr)); - * f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(pdch_chan_nr, 2342)); + /* rsl_unused := f_exp_ipa_rx(tr_RSL_CHAN_ACT_PDCH(pdch_chan_nr)); + * f_ipa_tx(ts_RSL_CHAN_ACT_ACK(pdch_chan_nr, 2342)); * f_sleep(1.0); * f_ts_dyn_mode_assert(0, 0, pdch_chan_nr.tn, PDCH_MODE) */ @@ -8074,7 +8138,7 @@ chan_nr := t_RslChanNr_BCCH(0), bs_power := tr_RSL_IE_BS_Power(red / 2)); tr_rsl_pdu.msg_disc := tr_RSL_MsgDisc(RSL_MDISC_CCHAN, false); - var RSL_Message unused := f_exp_ipa_rx(0, tr_rsl_pdu); + var RSL_Message unused := f_exp_ipa_rx(tr_rsl_pdu); /* Additionally verify the applied value over the CTRL interface */ var CtrlValue cred := f_ctrl_get_bts(IPA_CTRL, 0, "c0-power-reduction"); @@ -8198,7 +8262,7 @@ /* Instruct BSC to clear channel */ var BssmapCause cause := 0; BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(cause))); - f_exp_chan_rel_and_clear(dt, 0); + f_exp_chan_rel_and_clear(dt); } private function f_perform_compl_l3(RSL_DCHAN_PT rsl_pt, RSLEM_PROC_PT rsl_proc_pt, @@ -9041,14 +9105,14 @@ for (i := 0; i < NUM_TCHF_PER_BTS + NUM_TCHH_PER_BTS + NUM_SDCCH_PER_BTS; i := i+1) { f_chreq_act_ack('33'O, i); } - IPA_RSL[0].clear; + IPA_RSL[0][0].clear; f_ctrl_get_exp_ratectr_abs(IPA_CTRL, "bts", 0, "chreq:total", chreq_total + NUM_TCHF_PER_BTS + NUM_TCHH_PER_BTS + NUM_SDCCH_PER_BTS); /* Send EST IND for the first TCH, so we get to test the RR release cause */ var RslChannelNr first_tch := valueof(t_RslChanNr_Bm(1)); var octetstring l3 := '00010203040506'O; - f_ipa_tx(0, ts_RSL_EST_IND(first_tch, valueof(ts_RslLinkID_DCCH(0)), l3)); + f_ipa_tx(ts_RSL_EST_IND(first_tch, valueof(ts_RslLinkID_DCCH(0)), l3)); /* Accept BSSAP conn, so we get to test the Clear Request cause */ var BSSAP_N_CONNECT_ind rx_c_ind; @@ -9057,10 +9121,10 @@ BSSAP.send(ts_BSSAP_CONNECT_res(rx_c_ind.connectionId)); /* Send Channel request for emegergency call */ - f_ipa_tx(0, ts_RSL_CHAN_RQD('A5'O, 23)); + f_ipa_tx(ts_RSL_CHAN_RQD('A5'O, 23)); /* Expect the BSC to release one (the first) TCH/F on the BTS */ - f_expect_chan_rel(0, first_tch, expect_rr_chan_rel := true, expect_rll_rel_req := false, + f_expect_chan_rel(first_tch, expect_rr_chan_rel := true, expect_rll_rel_req := false, expect_rr_cause := GSM48_RR_CAUSE_PREMPTIVE_REL); /* Also expect a BSSMAP Clear Request with PREEMPTION */ @@ -9073,12 +9137,12 @@ } /* Expect the BSC to send activate/assign the channel for the emergency call */ - rx_rsl := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); + rx_rsl := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); if (first_tch != rx_rsl.ies[0].body.chan_nr) { setverdict(fail, "different TCH lchan activated than expected"); } - f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(first_tch, 33)); - rx_rsl := f_exp_ipa_rx(0, tr_RSL_IMM_ASSIGN(0)); + f_ipa_tx(ts_RSL_CHAN_ACT_ACK(first_tch, 33)); + rx_rsl := f_exp_ipa_rx(tr_RSL_IMM_ASSIGN(0)); /* complete the BSSMAP Clear to satisfy the conn leak check */ BSSAP.send(ts_BSSAP_DATA_req(sccp_conn_id, ts_BSSMAP_ClearCommand(enum2int(preemption)))); @@ -9340,8 +9404,8 @@ /* CS domain: 3 (SDCCH/4+CBCH) + 4 (TCH/F) + 2 (TCH/H) channels available */ for (var integer i := 0; i < 9; i := i + 1) { - f_ipa_tx(0, ts_RSL_CHAN_RQD(f_rnd_ra_cs(), 23)); - rsl_msg := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); + f_ipa_tx(ts_RSL_CHAN_RQD(f_rnd_ra_cs(), 23)); + rsl_msg := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); /* Make sure that Channel Identification IE is present */ if (not f_rsl_find_ie(rsl_msg, RSL_IE_CHAN_IDENT, ie)) { @@ -9381,11 +9445,11 @@ /* CS domain: 3 (SDCCH/4+CBCH) + 4 (TCH/F) + 2 (TCH/H) channels available */ for (var integer i := 0; i < 9; i := i + 1) { - f_ipa_tx(0, ts_RSL_CHAN_RQD(f_rnd_ra_cs(), 23)); - rsl_msg := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); + f_ipa_tx(ts_RSL_CHAN_RQD(f_rnd_ra_cs(), 23)); + rsl_msg := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); - f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(rsl_msg.ies[0].body.chan_nr, 33)); - rsl_msg := f_exp_ipa_rx(0, tr_RSL_MsgTypeC(RSL_MT_IMMEDIATE_ASSIGN_CMD)); + f_ipa_tx(ts_RSL_CHAN_ACT_ACK(rsl_msg.ies[0].body.chan_nr, 33)); + rsl_msg := f_exp_ipa_rx(tr_RSL_MsgTypeC(RSL_MT_IMMEDIATE_ASSIGN_CMD)); /* Make sure that Full Immediate Assign Info IE is present */ if (not f_rsl_find_ie(rsl_msg, RSL_IE_FULL_IMM_ASS_INFO, ie)) { @@ -9441,11 +9505,11 @@ /* Send a BSSMAP Assignment Command, expect CHANnel ACTIVation */ BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ass_cmd)); - rsl_msg := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); + rsl_msg := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); /* ACKnowledge CHANnel ACTIVation, expect RSL DATA REQuest */ - f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(rsl_msg.ies[0].body.chan_nr, 33)); - rsl_msg := f_exp_ipa_rx(0, tr_RSL_MsgTypeR(RSL_MT_DATA_REQ)); + f_ipa_tx(ts_RSL_CHAN_ACT_ACK(rsl_msg.ies[0].body.chan_nr, 33)); + rsl_msg := f_exp_ipa_rx(tr_RSL_MsgTypeR(RSL_MT_DATA_REQ)); /* Make sure that L3 Information IE is present */ if (not f_rsl_find_ie(rsl_msg, RSL_IE_L3_INFO, ie)) { @@ -9511,11 +9575,11 @@ f_vty_handover(BSCVTY, 0, 0, dt.rsl_chan_nr, 1); /* Expect RSL CHANnel ACTIVation on BTS1/TRX0/TS1 */ - rsl_msg := f_exp_ipa_rx(1, tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); + rsl_msg := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV), idx := {1, 0}); /* ACKnowledge channel activation and expect (RR) Handover Command */ - f_ipa_tx(1, ts_RSL_CHAN_ACT_ACK(rsl_msg.ies[0].body.chan_nr, 33)); - rsl_msg := f_exp_ipa_rx(0, tr_RSL_MsgTypeR(RSL_MT_DATA_REQ)); + f_ipa_tx(ts_RSL_CHAN_ACT_ACK(rsl_msg.ies[0].body.chan_nr, 33), idx := {1, 0}); + rsl_msg := f_exp_ipa_rx(tr_RSL_MsgTypeR(RSL_MT_DATA_REQ)); /* Make sure that L3 Information IE is present */ if (not f_rsl_find_ie(rsl_msg, RSL_IE_L3_INFO, ie)) { @@ -9624,7 +9688,7 @@ T.start; alt { - [] IPA_RSL[0].receive(tr_ASP_RSL_UD(tr_RSL_BCCH_INFO(RSL_SYSTEM_INFO_4))) -> value rx_rsl_ud { + [] IPA_RSL[0][0].receive(tr_ASP_RSL_UD(tr_RSL_BCCH_INFO(RSL_SYSTEM_INFO_4))) -> value rx_rsl_ud { var RSL_IE_Body ie := rx_rsl_ud.rsl.ies[2].body; /* FULL BCCH Information IE */ var SystemInformation si := dec_SystemInformation(ie.other.payload); @@ -9654,7 +9718,7 @@ si.payload.si4.cbch_mobile_alloc.v); } } - [] IPA_RSL[0].receive { repeat; } + [] IPA_RSL[0][0].receive { repeat; } [] T.timeout { setverdict(fail, "Timeout waiting for RSL BCCH INFOrmation (SI4)"); } @@ -10149,7 +10213,7 @@ rr_ho_cmpl_seen := false, handover_done := false, old_chan_nr := -, - expect_target_tsc := BTS_TSC[1] + expect_target_tsc := c_BtsParams[1].tsc }; /* issue hand-over command on VTY */ f_vty_handover(BSCVTY, 0, 0, g_chan_nr, 1); @@ -10545,7 +10609,7 @@ T.start; alt { - [] IPA_RSL[0].receive(tr_ASP_RSL_UD(?, IPAC_PROTO_RSL_TRX0)) -> value rx_rsl_ud { + [] IPA_RSL[0][0].receive(tr_ASP_RSL_UD(?, IPAC_PROTO_RSL_TRX0)) -> value rx_rsl_ud { if (rx_rsl_ud.rsl.msg_type == RSL_MT_CHAN_ACTIV) { T.stop; setverdict(fail, "CHANnel ACTivate in VAMOS mode succeeded even though BTS does not support VAMOS"); @@ -10768,7 +10832,7 @@ var MSC_ConnHdlr vc_conn2; pars2.imsi := pars1.imsi; pars2.media_nr := 2; - pars2.expect_tsc := BTS_TSC[1]; + pars2.expect_tsc := c_BtsParams[1].tsc; f_init(2, true, guard_timeout := 40.0); f_sleep(1.0); @@ -10784,19 +10848,21 @@ f_shutdown_helper(); } -function f_exp_ipa_rx_nonfatal(integer bts_nr, template (present) RSL_Message t_rx, float t_secs := 2.0, - IpaStreamId sid := IPAC_PROTO_RSL_TRX0, boolean ignore_other_rx := true) +function f_exp_ipa_rx_nonfatal(template (present) RSL_Message t_rx, + boolean ignore_other_rx := true, + BtsTrxIdx idx := {0, 0}, + float Tval := 2.0) runs on test_CT return template (omit) RSL_Message { var ASP_RSL_Unitdata rx_rsl_ud; - timer T := t_secs; + timer T := Tval; T.start; alt { - [] IPA_RSL[bts_nr].receive(tr_ASP_RSL_UD(t_rx, sid)) -> value rx_rsl_ud { + [] IPA_RSL[idx.bts][idx.trx].receive(tr_ASP_RSL_UD(t_rx, ?)) -> value rx_rsl_ud { T.stop; } - [ignore_other_rx] IPA_RSL[bts_nr].receive { repeat; } - [not ignore_other_rx] IPA_RSL[bts_nr].receive { + [ignore_other_rx] IPA_RSL[idx.bts][idx.trx].receive { repeat; } + [not ignore_other_rx] IPA_RSL[idx.bts][idx.trx].receive { log("f_exp_ipa_rx_nonfatal(): Got different message than ", t_rx); T.stop; return omit; @@ -10852,31 +10918,30 @@ /* RA containing reason=LU */ var GsmFrameNumber fn := 2342; var uint8_t ra := 2; - f_ipa_tx(0, ts_RSL_CHAN_RQD(int2oct(ra, 1), fn)); + f_ipa_tx(ts_RSL_CHAN_RQD(int2oct(ra, 1), fn)); - chan_act := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); + chan_act := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); /* First send the Chan Act ACK */ var RslChannelNr chan_nr := chan_act.ies[0].body.chan_nr; - var DchanTuple dt; - dt.rsl_chan_nr := chan_nr; + var DchanTuple dt := {-, chan_nr, {0, 0}}; var RSL_IE_Body chan_ident_ie; if (not f_rsl_find_ie(chan_act, RSL_IE_CHAN_IDENT, chan_ident_ie)) { setverdict(fail, "RSL Channel Identification IE is absent"); mtc.stop; } - f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(chan_nr, fn + 10)); + f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, fn + 10)); /* Then expect the Immediate Assignment, after we ACKed the chan act */ - imm_ass := f_exp_ipa_rx(0, tr_RSL_IMM_ASSIGN(0)); + imm_ass := f_exp_ipa_rx(tr_RSL_IMM_ASSIGN(0)); f_verify_imm_ass(imm_ass, ra, fn, chan_nr, chan_ident_ie.chan_ident.ch_desc.v.arfcn, chan_ident_ie.chan_ident.ch_desc.v.tsc); /* Check that the lchan is working */ var octetstring l3 := '00010203040506'O; - f_ipa_tx(0, ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); + f_ipa_tx(ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); var BSSAP_N_CONNECT_ind rx_c_ind; BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))) -> value rx_c_ind; @@ -10900,12 +10965,11 @@ /* RA containing reason=LU */ var GsmFrameNumber fn := 2342; var uint8_t ra := 2; - f_ipa_tx(0, ts_RSL_CHAN_RQD(int2oct(ra, 1), fn)); + f_ipa_tx(ts_RSL_CHAN_RQD(int2oct(ra, 1), fn)); - chan_act := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); + chan_act := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); var RslChannelNr chan_nr := chan_act.ies[0].body.chan_nr; - var DchanTuple dt; - dt.rsl_chan_nr := chan_nr; + var DchanTuple dt := {-, chan_nr, {0, 0}}; var RSL_IE_Body chan_ident_ie; if (not f_rsl_find_ie(chan_act, RSL_IE_CHAN_IDENT, chan_ident_ie)) { setverdict(fail, "RSL Channel Identification IE is absent"); @@ -10916,16 +10980,16 @@ f_vty_set_imm_ass(BSCVTY); /* *FIRST* expect the Immediate Assignment, before we ACK the chan act */ - imm_ass := f_exp_ipa_rx(0, tr_RSL_IMM_ASSIGN(0)); + imm_ass := f_exp_ipa_rx(tr_RSL_IMM_ASSIGN(0)); f_verify_imm_ass(imm_ass, ra, fn, chan_nr, chan_ident_ie.chan_ident.ch_desc.v.arfcn, chan_ident_ie.chan_ident.ch_desc.v.tsc); /* Only now send the Chan Act ACK */ - f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(chan_nr, fn+10)); + f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, fn+10)); /* Check that the lchan is working */ var octetstring l3 := '00010203040506'O; - f_ipa_tx(0, ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); + f_ipa_tx(ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); var BSSAP_N_CONNECT_ind rx_c_ind; BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))) -> value rx_c_ind; @@ -10949,12 +11013,11 @@ /* RA containing reason=LU */ var GsmFrameNumber fn := 2342; var uint8_t ra := 2; - f_ipa_tx(0, ts_RSL_CHAN_RQD(int2oct(ra, 1), fn)); + f_ipa_tx(ts_RSL_CHAN_RQD(int2oct(ra, 1), fn)); - chan_act := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); + chan_act := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); var RslChannelNr chan_nr := chan_act.ies[0].body.chan_nr; - var DchanTuple dt; - dt.rsl_chan_nr := chan_nr; + var DchanTuple dt := {-, chan_nr, {0, 0}}; var RSL_IE_Body chan_ident_ie; if (not f_rsl_find_ie(chan_act, RSL_IE_CHAN_IDENT, chan_ident_ie)) { setverdict(fail, "RSL Channel Identification IE is absent"); @@ -10965,16 +11028,16 @@ f_vty_set_imm_ass(BSCVTY); /* *FIRST* expect the Immediate Assignment, before we ACK the chan act */ - imm_ass := f_exp_ipa_rx(0, tr_RSL_IMM_ASSIGN(0)); + imm_ass := f_exp_ipa_rx(tr_RSL_IMM_ASSIGN(0)); f_verify_imm_ass(imm_ass, ra, fn, chan_nr, chan_ident_ie.chan_ident.ch_desc.v.arfcn, chan_ident_ie.chan_ident.ch_desc.v.tsc); /* Only now send the Chan Act ACK */ - f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(chan_nr, fn+10)); + f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, fn+10)); /* Check that the lchan is working */ var octetstring l3 := '00010203040506'O; - f_ipa_tx(0, ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); + f_ipa_tx(ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); var BSSAP_N_CONNECT_ind rx_c_ind; BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))) -> value rx_c_ind; @@ -10997,8 +11060,8 @@ var RslChannelNr chan_nr := valueof(t_RslChanNr_PDCH(6)); /* The BSC will activate the dynamic PDCH by default, so confirm that */ - f_exp_ipa_rx(0, tr_RSL_CHAN_ACT_PDCH(chan_nr)); - f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(chan_nr, 2323)); + f_exp_ipa_rx(tr_RSL_CHAN_ACT_PDCH(chan_nr)); + f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, 2323)); /* clean up timeslot 6 config, will only take effect when the OML drops the next time */ f_ts_set_chcomb(0, 0, 6, "PDCH"); @@ -11019,21 +11082,20 @@ /* RA containing reason=LU */ var GsmFrameNumber fn := 2342; var uint8_t ra := 2; - f_ipa_tx(0, ts_RSL_CHAN_RQD(int2oct(ra, 1), fn)); + f_ipa_tx(ts_RSL_CHAN_RQD(int2oct(ra, 1), fn)); /* (set bts 0 cfg back to default) */ f_vty_set_imm_ass(BSCVTY); /* Expect the dyn TS to deactivate PDCH first */ - f_exp_ipa_rx(0, tr_RSL_RF_CHAN_REL(chan_nr)); - f_ipa_tx(0, ts_RSL_RF_CHAN_REL_ACK(chan_nr)); + f_exp_ipa_rx(tr_RSL_RF_CHAN_REL(chan_nr)); + f_ipa_tx(ts_RSL_RF_CHAN_REL_ACK(chan_nr)); /* Now activation as SDCCH8 */ chan_nr := valueof(t_RslChanNr_SDCCH8(tn := 6, sub_slot := 0)); - var DchanTuple dt; - dt.rsl_chan_nr := chan_nr; + var DchanTuple dt := {-, chan_nr, {0, 0}}; - chan_act := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); + chan_act := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); var RSL_IE_Body chan_ident_ie; if (not f_rsl_find_ie(chan_act, RSL_IE_CHAN_IDENT, chan_ident_ie)) { setverdict(fail, "RSL Channel Identification IE is absent"); @@ -11041,16 +11103,16 @@ } /* *FIRST* expect the Immediate Assignment, before we ACK the chan act */ - imm_ass := f_exp_ipa_rx(0, tr_RSL_IMM_ASSIGN(0)); + imm_ass := f_exp_ipa_rx(tr_RSL_IMM_ASSIGN(0)); f_verify_imm_ass(imm_ass, ra, fn, chan_nr, chan_ident_ie.chan_ident.ch_desc.v.arfcn, chan_ident_ie.chan_ident.ch_desc.v.tsc); /* Only now send the Chan Act ACK */ - f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(chan_nr, fn+10)); + f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, fn+10)); /* Check that the lchan is working */ var octetstring l3 := '00010203040506'O; - f_ipa_tx(0, ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); + f_ipa_tx(ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); var BSSAP_N_CONNECT_ind rx_c_ind; BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))) -> value rx_c_ind; @@ -11073,8 +11135,8 @@ var RslChannelNr chan_nr := valueof(t_RslChanNr_PDCH(6)); /* The BSC will activate the dynamic PDCH by default, so confirm that */ - f_exp_ipa_rx(0, tr_RSL_CHAN_ACT_PDCH(chan_nr)); - f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(chan_nr, 2323)); + f_exp_ipa_rx(tr_RSL_CHAN_ACT_PDCH(chan_nr)); + f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, 2323)); /* clean up timeslot 6 config, will only take effect when the OML drops the next time */ f_ts_set_chcomb(0, 0, 6, "PDCH"); @@ -11095,39 +11157,38 @@ /* RA containing reason=LU */ var GsmFrameNumber fn := 2342; var uint8_t ra := 2; - f_ipa_tx(0, ts_RSL_CHAN_RQD(int2oct(ra, 1), fn)); + f_ipa_tx(ts_RSL_CHAN_RQD(int2oct(ra, 1), fn)); /* (set bts 0 cfg back to default) */ f_vty_set_imm_ass(BSCVTY); /* Expect the dyn TS to deactivate PDCH first */ - f_exp_ipa_rx(0, tr_RSL_RF_CHAN_REL(chan_nr)); + f_exp_ipa_rx(tr_RSL_RF_CHAN_REL(chan_nr)); /* And already the Immediate Assignment even before the PDCH Deact ACK */ - imm_ass := f_exp_ipa_rx(0, tr_RSL_IMM_ASSIGN(0)); + imm_ass := f_exp_ipa_rx(tr_RSL_IMM_ASSIGN(0)); /* continue the Osmo style PDCH Deact (usual chan rel) */ - f_ipa_tx(0, ts_RSL_RF_CHAN_REL_ACK(chan_nr)); + f_ipa_tx(ts_RSL_RF_CHAN_REL_ACK(chan_nr)); /* Now activation as SDCCH8 */ chan_nr := valueof(t_RslChanNr_SDCCH8(tn := 6, sub_slot := 0)); - var DchanTuple dt; - dt.rsl_chan_nr := chan_nr; + var DchanTuple dt := {-, chan_nr, {0, 0}}; - chan_act := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); + chan_act := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); var RSL_IE_Body chan_ident_ie; if (not f_rsl_find_ie(chan_act, RSL_IE_CHAN_IDENT, chan_ident_ie)) { setverdict(fail, "RSL Channel Identification IE is absent"); mtc.stop; } - f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(chan_nr, fn+10)); + f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, fn+10)); f_verify_imm_ass(imm_ass, ra, fn, chan_nr, chan_ident_ie.chan_ident.ch_desc.v.arfcn, chan_ident_ie.chan_ident.ch_desc.v.tsc); /* Check that the lchan is working */ var octetstring l3 := '00010203040506'O; - f_ipa_tx(0, ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); + f_ipa_tx(ts_RSL_EST_IND(chan_nr, valueof(ts_RslLinkID_DCCH(0)), l3)); var BSSAP_N_CONNECT_ind rx_c_ind; BSSAP.receive(tr_BSSAP_CONNECT_ind(?, ?, tr_BSSMAP_ComplL3(l3))) -> value rx_c_ind; @@ -11151,6 +11212,9 @@ "0,0,operational,unlocked,on,rsl-up;" & "1,0,operational,unlocked,on,rsl-up;" & "2,0,operational,unlocked,on,rsl-down;" & + "2,1,operational,unlocked,on,rsl-down;" & + "2,2,operational,unlocked,on,rsl-down;" & + "2,3,operational,unlocked,on,rsl-down;" & "3,0,inoperational,locked,on,rsl-down;"); f_logp(BSCVTY, "TC_ctrl_trx_rf_locked: lock BTS 1 TRX 0"); @@ -11165,6 +11229,9 @@ "0,0,operational,unlocked,on,rsl-up;" & "1,0,operational,locked,on,rsl-up;" & "2,0,operational,unlocked,on,rsl-down;" & + "2,1,operational,unlocked,on,rsl-down;" & + "2,2,operational,unlocked,on,rsl-down;" & + "2,3,operational,unlocked,on,rsl-down;" & "3,0,inoperational,locked,on,rsl-down;"); f_logp(BSCVTY, "TC_ctrl_trx_rf_locked: lock the already locked TRX, nothing should change"); @@ -11174,6 +11241,9 @@ "0,0,operational,unlocked,on,rsl-up;" & "1,0,operational,locked,on,rsl-up;" & "2,0,operational,unlocked,on,rsl-down;" & + "2,1,operational,unlocked,on,rsl-down;" & + "2,2,operational,unlocked,on,rsl-down;" & + "2,3,operational,unlocked,on,rsl-down;" & "3,0,inoperational,locked,on,rsl-down;"); f_logp(BSCVTY, "TC_ctrl_trx_rf_locked: unlock BTS 1 TRX 0"); @@ -11183,6 +11253,9 @@ "0,0,operational,unlocked,on,rsl-up;" & "1,0,operational,unlocked,on,rsl-up;" & "2,0,operational,unlocked,on,rsl-down;" & + "2,1,operational,unlocked,on,rsl-down;" & + "2,2,operational,unlocked,on,rsl-down;" & + "2,3,operational,unlocked,on,rsl-down;" & "3,0,inoperational,locked,on,rsl-down;"); f_logp(BSCVTY, "TC_ctrl_trx_rf_locked: unlock an already unlocked TRX, nothing should change"); @@ -11192,6 +11265,9 @@ "0,0,operational,unlocked,on,rsl-up;" & "1,0,operational,unlocked,on,rsl-up;" & "2,0,operational,unlocked,on,rsl-down;" & + "2,1,operational,unlocked,on,rsl-down;" & + "2,2,operational,unlocked,on,rsl-down;" & + "2,3,operational,unlocked,on,rsl-down;" & "3,0,inoperational,locked,on,rsl-down;"); f_logp(BSCVTY, "TC_ctrl_trx_rf_locked: unlock an inoperational TRX"); @@ -11201,6 +11277,9 @@ "0,0,operational,unlocked,on,rsl-up;" & "1,0,operational,unlocked,on,rsl-up;" & "2,0,operational,unlocked,on,rsl-down;" & + "2,1,operational,unlocked,on,rsl-down;" & + "2,2,operational,unlocked,on,rsl-down;" & + "2,3,operational,unlocked,on,rsl-down;" & "3,0,inoperational,locked,on,rsl-down;"); f_shutdown_helper(); @@ -11426,8 +11505,8 @@ /* The dyn TS wants to activate PDCH mode, ACK that. */ var RslChannelNr chan_nr; chan_nr := valueof(t_RslChanNr_PDCH(2)); - f_exp_ipa_rx(0, tr_RSL_CHAN_ACT_PDCH(chan_nr)); - f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(chan_nr, 2342)); + f_exp_ipa_rx(tr_RSL_CHAN_ACT_PDCH(chan_nr)); + f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, 2342)); /* Exhaust all dedicated SDCCH lchans. /* GSM 44.018 Table 9.1.8.2: @@ -11469,7 +11548,7 @@ var BssmapCause cause := 0; var DchanTuple dt := dyn_sddch[0]; BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(cause))); - f_exp_chan_rel_and_clear(dt, 0); + f_exp_chan_rel_and_clear(dt); /* one dyn TS SDCCH is free again, so only the static_sdcch should increment. For tch, both static and dynamic * count as occupied, so those still both increment. */ @@ -11480,13 +11559,13 @@ for (i := 1; i < lengthof(dyn_sddch); i := i+1) { dt := dyn_sddch[i]; BSSAP.send(ts_BSSAP_DATA_req(dt.sccp_conn_id, ts_BSSMAP_ClearCommand(cause))); - f_exp_chan_rel_and_clear(dt, 0); + f_exp_chan_rel_and_clear(dt); } /* All SDCCH on the dyn TS are released, the dyn TS wants to activate PDCH again */ chan_nr := valueof(t_RslChanNr_PDCH(2)); - f_exp_ipa_rx(0, tr_RSL_CHAN_ACT_PDCH(chan_nr)); - f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(chan_nr, 2342)); + f_exp_ipa_rx(tr_RSL_CHAN_ACT_PDCH(chan_nr)); + f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, 2342)); /* Now all channels are occupied except the dyn TS, so expecting only the static counters to increment */ f_all_allocated_expect_counter_change({"all_allocated:static_sdcch", "all_allocated:static_tch"}); diff --git a/bsc/BSC_Tests_CBSP.ttcn b/bsc/BSC_Tests_CBSP.ttcn index bede026..a933b24 100644 --- a/bsc/BSC_Tests_CBSP.ttcn +++ b/bsc/BSC_Tests_CBSP.ttcn @@ -109,23 +109,23 @@ } private altstep as_IgnRSL(template (present) RSL_Message tr) runs on cbsp_test_CT { -[] IPA_RSL[0].receive(tr_ASP_RSL_UD(tr)) { repeat; } -[] IPA_RSL[1].receive(tr_ASP_RSL_UD(tr)) { repeat; } -[] IPA_RSL[2].receive(tr_ASP_RSL_UD(tr)) { repeat; } +[] IPA_RSL[0][0].receive(tr_ASP_RSL_UD(tr)) { repeat; } +[] IPA_RSL[1][0].receive(tr_ASP_RSL_UD(tr)) { repeat; } +[] IPA_RSL[2][0].receive(tr_ASP_RSL_UD(tr)) { repeat; } } private altstep as_FailRSL() runs on cbsp_test_CT { var template (present) RSL_Message tr := (tr_RSL_SMSCB_CMD); var ASP_RSL_Unitdata rx; -[] IPA_RSL[0].receive(tr_ASP_RSL_UD(tr)) -> value rx { +[] IPA_RSL[0][0].receive(tr_ASP_RSL_UD(tr)) -> value rx { setverdict(fail, "Received unexpected RSL ", rx); mtc.stop; } -[] IPA_RSL[1].receive(tr_ASP_RSL_UD(tr)) -> value rx { +[] IPA_RSL[1][0].receive(tr_ASP_RSL_UD(tr)) -> value rx { setverdict(fail, "Received unexpected RSL ", rx); mtc.stop; } -[] IPA_RSL[2].receive(tr_ASP_RSL_UD(tr)) -> value rx { +[] IPA_RSL[2][0].receive(tr_ASP_RSL_UD(tr)) -> value rx { setverdict(fail, "Received unexpected RSL ", rx); mtc.stop; } @@ -225,9 +225,9 @@ function f_cbsp_reset_bss(integer idx) runs on cbsp_test_CT { /* Make sure no CBSP ETWS commands from a previous CBSP test remain in the RSL queue */ - IPA_RSL[0].clear; - IPA_RSL[1].clear; - IPA_RSL[2].clear; + IPA_RSL[0][0].clear; + IPA_RSL[1][0].clear; + IPA_RSL[2][0].clear; var template (value) CBSP_PDU tx; timer T := 3.0; @@ -254,9 +254,9 @@ { var template ASP_RSL_Unitdata zero_payload := tr_ASP_RSL_UD(tr_RSL_OSMO_ETWS_CMD(t_RslChanNr_PCH_AGCH(0), ''O)); interleave { - [] IPA_RSL[0].receive(zero_payload) { log("CBSP: disabled ETWS PN broadcast on bts 0"); } - [] IPA_RSL[1].receive(zero_payload) { log("CBSP: disabled ETWS PN broadcast on bts 1"); } - [] IPA_RSL[2].receive(zero_payload) { log("CBSP: disabled ETWS PN broadcast on bts 2"); } + [] IPA_RSL[0][0].receive(zero_payload) { log("CBSP: disabled ETWS PN broadcast on bts 0"); } + [] IPA_RSL[1][0].receive(zero_payload) { log("CBSP: disabled ETWS PN broadcast on bts 1"); } + [] IPA_RSL[2][0].receive(zero_payload) { log("CBSP: disabled ETWS PN broadcast on bts 2"); } } } @@ -562,9 +562,9 @@ var template (present) RSL_Message tr := f_page2rsl(pages[0], g_cbsp_msg_id, g_cbsp_ser_no, expect_blocks := expect_blocks); log("RSL[0,1,2] EXPECTING ", tr_ASP_RSL_UD(tr)); interleave { - [] IPA_RSL[0].receive(tr_ASP_RSL_UD(tr)) { log("Got SMSCB CMD on RSL[0]"); } - [] IPA_RSL[1].receive(tr_ASP_RSL_UD(tr)) { log("Got SMSCB CMD on RSL[1]"); } - [] IPA_RSL[2].receive(tr_ASP_RSL_UD(tr)) { log("Got SMSCB CMD on RSL[2]"); } + [] IPA_RSL[0][0].receive(tr_ASP_RSL_UD(tr)) { log("Got SMSCB CMD on RSL[0]"); } + [] IPA_RSL[1][0].receive(tr_ASP_RSL_UD(tr)) { log("Got SMSCB CMD on RSL[1]"); } + [] IPA_RSL[2][0].receive(tr_ASP_RSL_UD(tr)) { log("Got SMSCB CMD on RSL[2]"); } } setverdict(pass); @@ -609,7 +609,7 @@ f_cbsp_write(g_cbsp_msg_id, g_cbsp_ser_no, cell_list, content:=pages, success_list:=cell_list, fail_list:=omit); var template (present) RSL_Message tr := f_page2rsl(pages[0], g_cbsp_msg_id, g_cbsp_ser_no); - IPA_RSL[0].receive(tr_ASP_RSL_UD(tr)); + IPA_RSL[0][0].receive(tr_ASP_RSL_UD(tr)); f_sleep(5.0); } @@ -649,7 +649,7 @@ cell_list := ts_BSSMAP_CIL_LAC_CI({bssmap_lac_ci(mp_cgi_bts0)}); f_cbsp_write(g_cbsp_msg_id, g_cbsp_ser_no, cell_list, content:=pages, success_list:=?, fail_list:=omit); - IPA_RSL[0].receive(tr_ASP_RSL_UD(f_page2rsl(pages[0], g_cbsp_msg_id, g_cbsp_ser_no))); + IPA_RSL[0][0].receive(tr_ASP_RSL_UD(f_page2rsl(pages[0], g_cbsp_msg_id, g_cbsp_ser_no))); f_sleep(5.0); } @@ -663,7 +663,7 @@ cell_list := ts_BSSMAP_CIL_CI({bssmap_ci(mp_cgi_bts0)}); f_cbsp_write(g_cbsp_msg_id, g_cbsp_ser_no, cell_list, content:=pages, success_list:=?, fail_list:=omit); - IPA_RSL[0].receive(tr_ASP_RSL_UD(f_page2rsl(pages[0], g_cbsp_msg_id, g_cbsp_ser_no))); + IPA_RSL[0][0].receive(tr_ASP_RSL_UD(f_page2rsl(pages[0], g_cbsp_msg_id, g_cbsp_ser_no))); f_sleep(5.0); } @@ -681,7 +681,7 @@ cell_list := ts_BSSMAP_CIL_LAI({bssmap_lai(mp_cgi_bts2)}); f_cbsp_write(g_cbsp_msg_id, g_cbsp_ser_no, cell_list, content:=pages, success_list:=?, fail_list:=omit); - IPA_RSL[2].receive(tr_ASP_RSL_UD(f_page2rsl(pages[0], g_cbsp_msg_id, g_cbsp_ser_no))); + IPA_RSL[2][0].receive(tr_ASP_RSL_UD(f_page2rsl(pages[0], g_cbsp_msg_id, g_cbsp_ser_no))); f_sleep(5.0); } @@ -697,8 +697,8 @@ success_list:=?, fail_list:=omit); var template (present) RSL_Message tr := f_page2rsl(pages[0], g_cbsp_msg_id, g_cbsp_ser_no); interleave { - [] IPA_RSL[0].receive(tr_ASP_RSL_UD(tr)); - [] IPA_RSL[1].receive(tr_ASP_RSL_UD(tr)); + [] IPA_RSL[0][0].receive(tr_ASP_RSL_UD(tr)); + [] IPA_RSL[1][0].receive(tr_ASP_RSL_UD(tr)); } f_sleep(5.0); } @@ -714,7 +714,7 @@ f_cbsp_write(g_cbsp_msg_id, g_cbsp_ser_no, cell_list, num_bcast_req:=10, content:=pages, success_list:=?, fail_list:=omit); - IPA_RSL[0].receive(tr_ASP_RSL_UD(f_page2rsl(pages[0], g_cbsp_msg_id, g_cbsp_ser_no))); + IPA_RSL[0][0].receive(tr_ASP_RSL_UD(f_page2rsl(pages[0], g_cbsp_msg_id, g_cbsp_ser_no))); /* Replace: keep the same msg_id, use a new ser_no */ var uint16_t old_ser_no := g_cbsp_ser_no; @@ -722,7 +722,7 @@ f_cbsp_replace(g_cbsp_msg_id, g_cbsp_ser_no, old_ser_no, cell_list, content:=pages, success_list:=?, fail_list:=omit); - IPA_RSL[0].receive(tr_ASP_RSL_UD(f_page2rsl(pages[0], g_cbsp_msg_id, g_cbsp_ser_no))); + IPA_RSL[0][0].receive(tr_ASP_RSL_UD(f_page2rsl(pages[0], g_cbsp_msg_id, g_cbsp_ser_no))); f_sleep(1.0); setverdict(pass); } @@ -747,7 +747,7 @@ /* Count SMSCB messages during N=rep_number+2 repetition periods */ T.start(int2float(rep_period * (rep_number + 2)) * 1.883); alt { - [] IPA_RSL[0].receive(tr_ASP_RSL_UD(f_page2rsl(page, g_cbsp_msg_id, g_cbsp_ser_no))) { + [] IPA_RSL[0][0].receive(tr_ASP_RSL_UD(f_page2rsl(page, g_cbsp_msg_id, g_cbsp_ser_no))) { var float exp_period := int2float(rep_period) * 1.883; var float calc_period := T.read - last_time; @@ -829,7 +829,7 @@ f_cbsp_write(g_cbsp_msg_id, g_cbsp_ser_no, cell_list, num_bcast_req := 5, content:=pages, success_list:=?, fail_list:=omit); /* expect to receive it once on the BTS */ var template (present) RSL_Message tr := f_page2rsl(pages[0], g_cbsp_msg_id, g_cbsp_ser_no); - IPA_RSL[0].receive(tr_ASP_RSL_UD(tr)); + IPA_RSL[0][0].receive(tr_ASP_RSL_UD(tr)); /* kill it, expecting non-empty completion list; success must be empty in case of CBS! */ f_cbsp_kill(g_cbsp_msg_id, g_cbsp_ser_no, 0, cell_list, success_list:=omit, compl_list:=?, fail_list:=omit); } @@ -874,7 +874,7 @@ timer T := 5.0; T.start; alt { - [] IPA_RSL[0].receive(tr_ASP_RSL_UD(tr_RSL_DATA_REQ(dt.rsl_chan_nr, ?, ?))) -> value rx_rsl_ud { + [] IPA_RSL[0][0].receive(tr_ASP_RSL_UD(tr_RSL_DATA_REQ(dt.rsl_chan_nr, ?, ?))) -> value rx_rsl_ud { var RSL_IE_Body l3_ie; if (f_rsl_find_ie(rx_rsl_ud.rsl, RSL_IE_L3_INFO, l3_ie) == false) { setverdict(fail, "RSL DATA REQ without L3?"); @@ -891,7 +891,7 @@ setverdict(pass); } } - [] IPA_RSL[0].receive { repeat; } + [] IPA_RSL[0][0].receive { repeat; } [] T.timeout { setverdict(fail, "Waiting for APP INFO"); } @@ -910,14 +910,14 @@ } alt { - [] IPA_RSL[rsl_idx].receive(tr_ASP_RSL_UD(tr_RSL_OSMO_ETWS_CMD(t_RslChanNr_PCH_AGCH(0), tr_apdu))) { + [] IPA_RSL[rsl_idx][0].receive(tr_ASP_RSL_UD(tr_RSL_OSMO_ETWS_CMD(t_RslChanNr_PCH_AGCH(0), tr_apdu))) { setverdict(pass); } - [] IPA_RSL[rsl_idx].receive(tr_ASP_RSL_UD(tr_RSL_OSMO_ETWS_CMD(?,?))) { + [] IPA_RSL[rsl_idx][0].receive(tr_ASP_RSL_UD(tr_RSL_OSMO_ETWS_CMD(?,?))) { setverdict(fail, "Received unexpected OSMO_ETWS_CMD"); mtc.stop; } - [] IPA_RSL[rsl_idx].receive { repeat; } + [] IPA_RSL[rsl_idx][0].receive { repeat; } [] T.timeout { if (enabled) { setverdict(fail, "Timeout waiting for RSL_OSMO_ETWS_CMD (enable)"); @@ -1055,7 +1055,7 @@ success_list:=cell_list, fail_list:=omit); var template (present) RSL_Message tr := f_page2rsl(pages[0], g_cbsp_msg_id, g_cbsp_ser_no); /* wait for first transmission */ - IPA_RSL[0].receive(tr_ASP_RSL_UD(tr)); + IPA_RSL[0][0].receive(tr_ASP_RSL_UD(tr)); var template (present) CBSP_IE_NumBcastComplList compl_list := { len := ?, spare1_4 := ?, diff --git a/bsc/BSC_Tests_LCLS.ttcn b/bsc/BSC_Tests_LCLS.ttcn index 9771087..82f6b11 100644 --- a/bsc/BSC_Tests_LCLS.ttcn +++ b/bsc/BSC_Tests_LCLS.ttcn @@ -160,15 +160,16 @@ } /* helper function to create and connect a MSC_ConnHdlr component */ -/* FIXME: Why can't we use BSC_Tests.f_connect_andler() ?!? */ +/* FIXME: Why can't we use BSC_Tests.f_connect_andler() ?!? + * TODO: allow connecting to TRX1..N, not only TRX0 */ private function f_connect_handler(inout LCLS_MSC_ConnHdlr vc_conn, integer bssap_idx := 0) runs on lcls_test_CT { connect(vc_conn:RAN, g_bssap[bssap_idx].vc_RAN:PROC); connect(vc_conn:MGCP_PROC, vc_MGCP:MGCP_PROC); - connect(vc_conn:RSL, bts[0].rsl.vc_RSL:CLIENT_PT); - connect(vc_conn:RSL_PROC, bts[0].rsl.vc_RSL:RSL_PROC); - if (isvalue(bts[1])) { - connect(vc_conn:RSL1, bts[1].rsl.vc_RSL:CLIENT_PT); - connect(vc_conn:RSL1_PROC, bts[1].rsl.vc_RSL:RSL_PROC); + connect(vc_conn:RSL, bts[0][0].rsl.vc_RSL:CLIENT_PT); + connect(vc_conn:RSL_PROC, bts[0][0].rsl.vc_RSL:RSL_PROC); + if (isvalue(bts[1][0])) { + connect(vc_conn:RSL1, bts[1][0].rsl.vc_RSL:CLIENT_PT); + connect(vc_conn:RSL1_PROC, bts[1][0].rsl.vc_RSL:RSL_PROC); } connect(vc_conn:BSSAP, g_bssap[bssap_idx].vc_RAN:CLIENT); connect(vc_conn:MGCP, vc_MGCP:MGCP_CLIENT); diff --git a/bsc/BSC_Tests_VAMOS.ttcn b/bsc/BSC_Tests_VAMOS.ttcn index 1958dc5..6074fb2 100644 --- a/bsc/BSC_Tests_VAMOS.ttcn +++ b/bsc/BSC_Tests_VAMOS.ttcn @@ -247,7 +247,7 @@ var RSL_Message rsl; - rsl := f_exp_ipa_rx(0, tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); + rsl := f_exp_ipa_rx(tr_RSL_MsgTypeD(RSL_MT_CHAN_ACTIV)); var RSL_IE_Body chan_mode_ie; if (f_rsl_find_ie(rsl, RSL_IE_CHAN_MODE, chan_mode_ie) == false) { @@ -266,7 +266,7 @@ } var RslChannelNr chan_nr := rsl.ies[0].body.chan_nr; - f_ipa_tx(0, ts_RSL_CHAN_ACT_ACK(chan_nr, 23+10)); + f_ipa_tx(ts_RSL_CHAN_ACT_ACK(chan_nr, 23+10)); f_sleep(1.0); f_lchan_ensure_established(BSCVTY, 0, 0, chan_nr); -- To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/28212 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-ttcn3-hacks Gerrit-Branch: master Gerrit-Change-Id: Ic0fd97234464ef624010a5f01189aa61f3393b84 Gerrit-Change-Number: 28212 Gerrit-PatchSet: 4 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-CC: neels <nhofmeyr(a)sysmocom.de> Gerrit-MessageType: merged

3 years, 2 months

1
0
0 0

Change in docker-playground[master]: ttcn3-bsc-test/osmo-bsc.cfg: configure 3 additional TRX instances for...

by fixeria

fixeria has submitted this change. ( https://gerrit.osmocom.org/c/docker-playground/+/28215 ) Change subject: ttcn3-bsc-test/osmo-bsc.cfg: configure 3 additional TRX instances for BTS2 ...................................................................... ttcn3-bsc-test/osmo-bsc.cfg: configure 3 additional TRX instances for BTS2 Change-Id: Iba4fbd5c9ed59783df4ac64e68b2beef73a812ff Related: Ie1241c54abac9a56906c525155cbf7482bca738e Related: SYS#5460 --- M ttcn3-bsc-test/jenkins.sh M ttcn3-bsc-test/osmo-bsc.cfg 2 files changed, 96 insertions(+), 5 deletions(-) Approvals: Jenkins Builder: Verified laforge: Looks good to me, approved diff --git a/ttcn3-bsc-test/jenkins.sh b/ttcn3-bsc-test/jenkins.sh index 5f3ba53..40b3f62 100755 --- a/ttcn3-bsc-test/jenkins.sh +++ b/ttcn3-bsc-test/jenkins.sh @@ -46,16 +46,17 @@ BTS_FEATURES="-fCCN,EGPRS,GPRS,IPv6_NSVC,PAGING_COORDINATION" -for i in `seq 0 2`; do - echo Starting container with OML for BTS$i +for i in "0 1" "1 1" "2 4"; do + set -- $i # convert the {BTS, TRXN} "tuple" into the param args $1 $2 + echo "Starting container with OML for BTS$1 (TRXN = $2)" docker run --rm \ - $(docker_network_params $SUBNET 10$i) \ + $(docker_network_params $SUBNET 10$1) \ --ulimit core=-1 \ -v $VOL_BASE_DIR/bts-omldummy:/data \ - --name ${BUILD_TAG}-bts$i -d \ + --name ${BUILD_TAG}-bts$1 -d \ $DOCKER_ARGS \ $REPO_USER/osmo-bts-$IMAGE_SUFFIX \ - /bin/sh -c "/usr/local/bin/respawn.sh osmo-bts-omldummy $BTS_FEATURES 172.18.2.20 $((i + 1234)) 1 >>/data/osmo-bts-omldummy-${i}.log 2>&1" + /bin/sh -c "/usr/local/bin/respawn.sh osmo-bts-omldummy $BTS_FEATURES 172.18.2.20 $(($1 + 1234)) $2 >>/data/osmo-bts-omldummy-$1.log 2>&1" done echo Starting container with BSC testsuite diff --git a/ttcn3-bsc-test/osmo-bsc.cfg b/ttcn3-bsc-test/osmo-bsc.cfg index cfc6186..eefcde4 100644 --- a/ttcn3-bsc-test/osmo-bsc.cfg +++ b/ttcn3-bsc-test/osmo-bsc.cfg @@ -369,6 +369,96 @@ timeslot 7 phys_chan_config PDCH hopping enabled 0 + trx 1 + rf_locked 0 + arfcn 873 + nominal power 23 + max_power_red 20 + rsl e1 tei 0 + timeslot 0 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 1 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 2 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 3 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 4 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 5 + phys_chan_config TCH/H + hopping enabled 0 + timeslot 6 + phys_chan_config PDCH + hopping enabled 0 + timeslot 7 + phys_chan_config PDCH + hopping enabled 0 + trx 2 + rf_locked 0 + arfcn 875 + nominal power 23 + max_power_red 20 + rsl e1 tei 0 + timeslot 0 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 1 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 2 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 3 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 4 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 5 + phys_chan_config TCH/H + hopping enabled 0 + timeslot 6 + phys_chan_config PDCH + hopping enabled 0 + timeslot 7 + phys_chan_config PDCH + hopping enabled 0 + trx 3 + rf_locked 0 + arfcn 877 + nominal power 23 + max_power_red 20 + rsl e1 tei 0 + timeslot 0 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 1 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 2 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 3 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 4 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 5 + phys_chan_config TCH/H + hopping enabled 0 + timeslot 6 + phys_chan_config PDCH + hopping enabled 0 + timeslot 7 + phys_chan_config PDCH + hopping enabled 0 bts 3 type sysmobts band DCS1800 -- To view, visit https://gerrit.osmocom.org/c/docker-playground/+/28215 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: docker-playground Gerrit-Branch: master Gerrit-Change-Id: Iba4fbd5c9ed59783df4ac64e68b2beef73a812ff Gerrit-Change-Number: 28215 Gerrit-PatchSet: 2 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: merged

3 years, 2 months

1
0
0 0

2025

2024

2023

2022

gerrit-log June 2022