Change in osmo-e1d[master]: Bump version: 0.3.0.72-bb13-dirty → 0.4.0

pespin has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-e1d/+/28466 ) Change subject: Bump version: 0.3.0.72-bb13-dirty → 0.4.0 ...................................................................... Bump version: 0.3.0.72-bb13-dirty → 0.4.0 Change-Id: Ia3b429acd866ab644a9d9a848d69bd9627dcd840 --- M configure.ac M debian/changelog M debian/control M src/Makefile.am 4 files changed, 90 insertions(+), 6 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-e1d refs/changes/66/28466/1 diff --git a/configure.ac b/configure.ac index 182d914..f671591 100644 --- a/configure.ac +++ b/configure.ac @@ -35,9 +35,9 @@ PKG_CHECK_MODULES(TALLOC, [talloc >= 2.0.1]) -PKG_CHECK_MODULES(LIBOSMOCORE, libosmocore >= 1.6.0) -PKG_CHECK_MODULES(LIBOSMOVTY, libosmovty >= 1.6.0) -PKG_CHECK_MODULES(LIBOSMOUSB, libosmousb >= 1.6.0) +PKG_CHECK_MODULES(LIBOSMOCORE, libosmocore >= 1.7.0) +PKG_CHECK_MODULES(LIBOSMOVTY, libosmovty >= 1.7.0) +PKG_CHECK_MODULES(LIBOSMOUSB, libosmousb >= 1.7.0) PKG_CHECK_MODULES(LIBUSB, libusb-1.0 >= 1.0.21) AC_CONFIG_MACRO_DIR([m4]) diff --git a/debian/changelog b/debian/changelog index 3b3e20f..78a61df 100644 --- a/debian/changelog +++ b/debian/changelog @@ -1,3 +1,87 @@ +osmo-e1d (0.4.0) unstable; urgency=medium + + [ Harald Welte ] + * Use the error counters for remote alarm + remote CRC error + * Add support for icE1usb RAI interrupt error flag + * cosmetic: Adhere osmocom coding style in for-loops + * usb: Print failed USB isochronous packets + * usb: Use libusb_status_str when logging INT EP error + * make rate_counters work + * update copyright statement + * e1_{intf,line}_new: Allow caller to specify the numeric identifier + * Allow configuration of interfaces/lines via VTY + * GPS-DO support for icE1usb hardware + * Proper libusb error reporting in all error paths + * usb: rename 'size' to 'len' in callback functions + * e1d.h: add #pragma once + * cosmetic: Remove extra empty newlines from end of intf_line.c + * intf_line.c: Make e1d_find_intf_by_usb_serial safe for empty string + * cosmetic: curly braces around multi-line blocks + * intf_line: Ensure unique rate counter group indexes + * mux_demux.c: Use %zu for size_t + * vty.c: Fix re-reading of config file after 'write file' + * OCTOI: initial support for E1oIP forwarding + * add example config files for octoi-server and octoi-client + * RIFO (random in, first out) for IP->E1 direction + * fix segfault on 'show octoi-server' if no server configured + * vty: Print only applicable information during 'show line' + * OCTOI: re-implement LINE_STAT_E1oIP_E1T_FIFO + * octo: give rate_ctr / stat_items meaningful identifiers + * Make use of libosmcoore cpu_sched_vty + * Set rate_ctr_group name for each line + * Fix stats exporter + * octoi: Update RIFO depth also on dequeue + * Add rate counters for number of frames muxed/demuxed (E1 side) + * octoi: Add new rate-counter for out-of-order packets + * e1d: stat_items for the GPS-DO related bits + * octoi: Reset FIFO/RIFO when entering ACCEPTED state + * octoi: Disconnect the link when >= 7500 underruns/s + * rifo_test: print rifo_depth + rifo_frames on every IN/OUT + * octoi: differentiate UNDERRUN from SUBSTITUTED in counters + * e1oip: Rename e1oip:overflow to e1oip:e1o_overflow + * e1oip: Add rate_ctr for IP->E1 RIFO overflows + * octoi: Terminate connection on too high RIFO OVERFLOW rates + * octoi: Fix client re-start after clock drift disconnect + * octoi: add new counter every time a connection is accepted + * e1oip: Add stat items for number of timeslots + * cosmetic: remove dead code {fifo,rifo}_dump() functions + * octoi: Support setting IP DSCP and socket priority via VTY + * e1oip: fix line counter descriptions + * e1oip: Add rate_ctr for rx + tx packet / byte count + * octoi: only memcpy() if it is present in _octoi_tx_echo() + * octoi: Send ECHO_REQ every 10s and update the related stat_item + * e1oip: introduce #defines for BATCHING_FACTOR / PREFILL_COUNT + * e1oip: Make batching-factor and prefill-frame-count configurable + * update git URLs (git -> https; gitea) + * README.md: Fix syntax for hyperlinks + + [ Sylvain Munaut ] + * e1d/usb: Limit feedback EP transfer size to 3 + * e1d/usb: Use wMaxPacketSize to know maximum number of frames to send + * build: Increase warnings + * Fix a bunch of warning raised by the new build warning options + * usb: Add warning for error during interrupt transfers + * mux_demux: Shuffle functions around for consistency + * mux_demux: In RAW mode, fill with dummy until first TX + * contrib/e1-prbs-test: Delay the TX pipe fill data until first RX + * RIFO: Minor typo/comment fixes + * RIFO: Fix operator precedence issue in the math for bucket_for_fn + * RIFO: Fix issue in frame number bounds checking + * RIFO: Add a test for bounds checking + * OCTOI: Fix the extension of 16b FN from packet to full 32b FN + * octoi: Simple RX priming / pre-filling + * rifo_test: Use a helper function for the rifo init + * octoi: Fix frame_rifo_depth() function + + [ Oliver Smith ] + * checkpatch.conf: new file + + [ Tobias Mädel ] + * RIFO: fix frame_rifo_in check on frame number wrap-around + * RIFO: add more thorough tests and a vetted test.ok file + + -- Pau Espin Pedrol <pespin(a)sysmocom.de> Wed, 29 Jun 2022 12:09:54 +0200 + osmo-e1d (0.3.0) unstable; urgency=medium * e1d: reliably detect EOF in _e1_ts_{read,write} (RAW mode) diff --git a/debian/control b/debian/control index bb6cf8f..58a6d88 100644 --- a/debian/control +++ b/debian/control @@ -10,9 +10,9 @@ libtool, pkg-config, python3-minimal, - libosmocore-dev (>= 1.6.0), + libosmocore-dev (>= 1.7.0), libusb-1.0-0-dev, - osmo-gsm-manuals-dev (>= 1.2.0) + osmo-gsm-manuals-dev (>= 1.3.0) Standards-Version: 3.9.8 Vcs-Git: https://gitea.osmocom.org/retronetworking/osmo-e1d Vcs-Browser: https://gitea.osmocom.org/retronetworking/osmo-e1d diff --git a/src/Makefile.am b/src/Makefile.am index 5795598..2cc8a8f 100644 --- a/src/Makefile.am +++ b/src/Makefile.am @@ -3,7 +3,7 @@ # This is _NOT_ the library release version, it's an API version. # Please read Chapter 6 "Library interface versions" of the libtool # documentation before making any modification -LIBVERSION=1:0:0 +LIBVERSION=2:0:1 AM_CPPFLAGS = $(all_includes) -I$(top_srcdir)/include -I$(top_builddir) AM_CFLAGS=-Wall -Wextra -Wno-missing-field-initializers -Wno-unused-parameter -Wno-unused-result $(LIBOSMOCORE_CFLAGS) \ -- To view, visit https://gerrit.osmocom.org/c/osmo-e1d/+/28466 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-e1d Gerrit-Branch: master Gerrit-Change-Id: Ia3b429acd866ab644a9d9a848d69bd9627dcd840 Gerrit-Change-Number: 28466 Gerrit-PatchSet: 1 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: newchange