Change in osmo-e1-hardware[master]: icE1usb fw: Use helper functions to derive config value from struct

tnt has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-e1-hardware/+/26850 ) Change subject: icE1usb fw: Use helper functions to derive config value from struct ...................................................................... icE1usb fw: Use helper functions to derive config value from struct Just from this patch, it's not clear why this is better, but it makes things a bit cleaner in upcoming patches Signed-off-by: Sylvain Munaut &lt;tnt(a)246tNt.com&gt; Change-Id: I4c75bb4eb20c1d1aaa1695e95bdf0417bbf3bf76 --- M firmware/ice40-riscv/icE1usb/usb_e1.c 1 file changed, 13 insertions(+), 18 deletions(-) git pull ssh://gerrit.osmocom.org:29418/osmo-e1-hardware refs/changes/50/26850/1 diff --git a/firmware/ice40-riscv/icE1usb/usb_e1.c b/firmware/ice40-riscv/icE1usb/usb_e1.c index 08b192b..9dc6f1d 100644 --- a/firmware/ice40-riscv/icE1usb/usb_e1.c +++ b/firmware/ice40-riscv/icE1usb/usb_e1.c @@ -236,25 +236,19 @@ return USB_FND_SUCCESS; } -static void _perform_tx_config(int port) +static uint32_t +_tx_config_reg(const struct ice1usb_tx_config *cfg) { - struct usb_e1_state *usb_e1 = _get_state(port); - const struct ice1usb_tx_config *cfg = &usb_e1->tx_cfg; - e1_tx_config(port, - ((cfg->mode & 3) << 1) | + return ((cfg->mode & 3) << 1) | ((cfg->timing & 1) << 3) | ((cfg->alarm & 1) << 4) | - ((cfg->ext_loopback & 3) << 5) - ); + ((cfg->ext_loopback & 3) << 5); } -static void _perform_rx_config(int port) +static uint32_t +_rx_config_reg(const struct ice1usb_rx_config *cfg) { - struct usb_e1_state *usb_e1 = _get_state(port); - const struct ice1usb_rx_config *cfg = &usb_e1->rx_cfg; - e1_rx_config(port, - (cfg->mode << 1) - ); + return (cfg->mode << 1); } static enum usb_fnd_resp @@ -300,9 +294,10 @@ case true: /* Reset and Re-Enable E1 */ - e1_init(port, 0, 0); - _perform_rx_config(port); - _perform_tx_config(port); + e1_init(port, + _rx_config_reg(&rx_cfg_default), + _tx_config_reg(&tx_cfg_default) + ); /* Reset BDI */ usb_e1->in_bdi = 0; @@ -352,7 +347,7 @@ printf("set_tx_mode[%d] %02x%02x%02x%02x\r\n", port, xfer->data[0], xfer->data[1], xfer->data[2], xfer->data[3]); usb_e1->tx_cfg = *cfg; - _perform_tx_config(port); + e1_tx_config(port, _tx_config_reg(cfg)); return true; } @@ -365,7 +360,7 @@ struct usb_e1_state *usb_e1 = _get_state(port); printf("set_rx_mode[%d] %02x\r\n", port, xfer->data[0]); usb_e1->rx_cfg = *cfg; - _perform_rx_config(port); + e1_rx_config(port, _rx_config_reg(cfg)); return true; } -- To view, visit https://gerrit.osmocom.org/c/osmo-e1-hardware/+/26850 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-e1-hardware Gerrit-Branch: master Gerrit-Change-Id: I4c75bb4eb20c1d1aaa1695e95bdf0417bbf3bf76 Gerrit-Change-Number: 26850 Gerrit-PatchSet: 1 Gerrit-Owner: tnt &lt;tnt(a)246tNt.com&gt; Gerrit-CC: Jenkins Builder Gerrit-MessageType: newchange