[S] Change in osmo-pcu[master]: bts: Use same default value for T3193 as set in osmo-bts/bsc

pespin has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-pcu/+/33350 ) Change subject: bts: Use same default value for T3193 as set in osmo-bts/bsc ...................................................................... bts: Use same default value for T3193 as set in osmo-bts/bsc That timer is configured by value sent over PCUIF, hence better have it to the same default value in osmo-bsc/osmo-bts. Change-Id: I498f05ff4d232164690d177430e90eb99b4eea9d --- M src/bts.cpp 1 file changed, 13 insertions(+), 1 deletion(-) git pull ssh://gerrit.osmocom.org:29418/osmo-pcu refs/changes/50/33350/1 diff --git a/src/bts.cpp b/src/bts.cpp index 77d8738..2dbccda 100644 --- a/src/bts.cpp +++ b/src/bts.cpp @@ -80,7 +80,7 @@ { .T=3168, .default_val=4000, .unit=OSMO_TDEF_MS, .desc="Time MS waits for PACKET UPLINK ACK when establishing a UL TBF", .val=0 }, { .T=3169, .default_val=5, .unit=OSMO_TDEF_S, .desc="Reuse of USF and TFI(s) after the MS uplink TBF assignment is invalid", .val=0 }, { .T=3191, .default_val=5, .unit=OSMO_TDEF_S, .desc="Reuse of TFI(s) after sending (1) last RLC Data Block on TBF(s), or (2) PACKET TBF RELEASE for an MBMS radio bearer", .val=0 }, - { .T=3193, .default_val=100, .unit=OSMO_TDEF_MS, .desc="Reuse of TFI(s) after reception of final PACKET DOWNLINK ACK/NACK from MS for TBF", .val=0 }, + { .T=3193, .default_val=1600, .unit=OSMO_TDEF_MS, .desc="Reuse of TFI(s) after reception of final PACKET DOWNLINK ACK/NACK from MS for TBF", .val=0 }, { .T=3195, .default_val=5, .unit=OSMO_TDEF_S, .desc="Reuse of TFI(s) upon no response from the MS (radio failure or cell change) for TBF/MBMS radio bearer", .val=0 }, { .T = -16, .default_val = 1000, .unit = OSMO_TDEF_MS, .desc = "Granularity for *:all_allocated rate counters: amount of milliseconds that one counter increment" -- To view, visit https://gerrit.osmocom.org/c/osmo-pcu/+/33350 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-pcu Gerrit-Branch: master Gerrit-Change-Id: I498f05ff4d232164690d177430e90eb99b4eea9d Gerrit-Change-Number: 33350 Gerrit-PatchSet: 1 Gerrit-Owner: pespin <pespin(a)sysmocom.de> Gerrit-MessageType: newchange