pespin has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmocom-bb/+/32441 )
Change subject: layer23: vty: Move sim related commands to common/ ......................................................................
layer23: vty: Move sim related commands to common/
Change-Id: I9e95732255c248b000f1045c395a15217d10db78 --- M src/host/layer23/src/common/vty.c M src/host/layer23/src/mobile/vty_interface.c 2 files changed, 348 insertions(+), 340 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmocom-bb refs/changes/41/32441/1
diff --git a/src/host/layer23/src/common/vty.c b/src/host/layer23/src/common/vty.c index 2be1425..9344bad 100644 --- a/src/host/layer23/src/common/vty.c +++ b/src/host/layer23/src/common/vty.c @@ -469,6 +469,301 @@ return CMD_SUCCESS; }
+static int _sim_test_cmd(struct vty *vty, int argc, const char *argv[], + int attached) +{ + struct osmocom_ms *ms; + struct gsm_settings *set; + int rc; + + /* Initial testcard settings */ + uint16_t mcc = 0x001, mnc = 0x01f, lac = 0x0000; + uint32_t tmsi = GSM_RESERVED_TMSI; + + ms = l23_vty_get_ms(argv[0], vty); + if (!ms) + return CMD_WARNING; + + if (ms->subscr.sim_valid) { + vty_out(vty, "SIM already attached, remove first!%s", + VTY_NEWLINE); + return CMD_WARNING; + } + + set = &ms->settings; + if (set->test_rplmn_valid) { + mcc = set->test_rplmn_mcc; + mnc = set->test_rplmn_mnc; + + if (set->test_lac > 0x0000 && set->test_lac < 0xfffe) + lac = set->test_lac; + + if (set->test_tmsi != 0xffffffff) + tmsi = set->test_tmsi; + } + + if (argc == 2) { + vty_out(vty, "Give MNC together with MCC%s", VTY_NEWLINE); + return CMD_WARNING; + } + if (argc >= 3) { + mcc = gsm_input_mcc((char *)argv[1]); + mnc = gsm_input_mnc((char *)argv[2]); + if (mcc == GSM_INPUT_INVALID) { + vty_out(vty, "Given MCC invalid%s", VTY_NEWLINE); + return CMD_WARNING; + } + if (mnc == GSM_INPUT_INVALID) { + vty_out(vty, "Given MNC invalid%s", VTY_NEWLINE); + return CMD_WARNING; + } + } + + if (argc >= 4) + lac = strtoul(argv[3], NULL, 16); + + if (argc >= 5) + tmsi = strtoul(argv[4], NULL, 16); + + rc = gsm_subscr_testcard(ms, mcc, mnc, lac, tmsi, attached); + if (rc < 0) { + vty_out(vty, "Attach test SIM card failed: %d%s", rc, VTY_NEWLINE); + return CMD_WARNING; + } + + return CMD_SUCCESS; +} + +DEFUN(sim_test, sim_test_cmd, + "sim testcard MS_NAME [MCC] [MNC] [LAC] [TMSI]", + "SIM actions\nAttach built in test SIM\nName of MS (see "show ms")\n" + "Optionally set mobile Country Code of RPLMN\n" + "Optionally set mobile Network Code of RPLMN\n" + "Optionally set location area code of RPLMN\n" + "Optionally set current assigned TMSI") +{ + return _sim_test_cmd(vty, argc, argv, 0); +} + +DEFUN(sim_test_att, sim_test_att_cmd, + "sim testcard MS_NAME MCC MNC LAC TMSI attached", + "SIM actions\nAttach built in test SIM\nName of MS (see "show ms")\n" + "Set mobile Country Code of RPLMN\nSet mobile Network Code of RPLMN\n" + "Set location area code\nSet current assigned TMSI\n" + "Indicate to MM that card is already attached") +{ + return _sim_test_cmd(vty, argc, argv, 1); +} + +DEFUN(sim_sap, sim_sap_cmd, "sim sap MS_NAME", + "SIM actions\nAttach SIM over SAP interface\n" + "Name of MS (see "show ms")\n") +{ + struct osmocom_ms *ms; + + ms = l23_vty_get_ms(argv[0], vty); + if (!ms) + return CMD_WARNING; + + if (ms->subscr.sim_valid) { + vty_out(vty, "SIM already attached, remove first!%s", + VTY_NEWLINE); + return CMD_WARNING; + } + + if (gsm_subscr_sapcard(ms) != 0) + return CMD_WARNING; + + return CMD_SUCCESS; +} + +DEFUN(sim_reader, sim_reader_cmd, "sim reader MS_NAME", + "SIM actions\nAttach SIM from reader\nName of MS (see "show ms")") +{ + struct osmocom_ms *ms; + + ms = l23_vty_get_ms(argv[0], vty); + if (!ms) + return CMD_WARNING; + + if (ms->subscr.sim_valid) { + vty_out(vty, "SIM already attached, remove first!%s", + VTY_NEWLINE); + return CMD_WARNING; + } + + gsm_subscr_simcard(ms); + + return CMD_SUCCESS; +} + +DEFUN(sim_remove, sim_remove_cmd, "sim remove MS_NAME", + "SIM actions\nDetach SIM card\nName of MS (see "show ms")") +{ + struct osmocom_ms *ms; + + ms = l23_vty_get_ms(argv[0], vty); + if (!ms) + return CMD_WARNING; + + if (!ms->subscr.sim_valid) { + vty_out(vty, "No SIM attached!%s", VTY_NEWLINE); + return CMD_WARNING; + } + + if (ms->subscr.sim_type == GSM_SIM_TYPE_SAP) + gsm_subscr_remove_sapcard(ms); + + gsm_subscr_remove(ms); + return CMD_SUCCESS; +} + +DEFUN(sim_pin, sim_pin_cmd, "sim pin MS_NAME PIN", + "SIM actions\nEnter PIN for SIM card\nName of MS (see "show ms")\n" + "PIN number") +{ + struct osmocom_ms *ms; + + ms = l23_vty_get_ms(argv[0], vty); + if (!ms) + return CMD_WARNING; + + if (strlen(argv[1]) < 4 || strlen(argv[1]) > 8) { + vty_out(vty, "PIN must be in range 4..8!%s", VTY_NEWLINE); + return CMD_WARNING; + } + + if (!ms->subscr.sim_pin_required) { + vty_out(vty, "No PIN is required at this time!%s", VTY_NEWLINE); + return CMD_WARNING; + } + + gsm_subscr_sim_pin(ms, (char *)argv[1], "", 0); + + return CMD_SUCCESS; +} + +DEFUN(sim_disable_pin, sim_disable_pin_cmd, "sim disable-pin MS_NAME PIN", + "SIM actions\nDisable PIN of SIM card\nName of MS (see "show ms")\n" + "PIN number") +{ + struct osmocom_ms *ms; + + ms = l23_vty_get_ms(argv[0], vty); + if (!ms) + return CMD_WARNING; + + if (strlen(argv[1]) < 4 || strlen(argv[1]) > 8) { + vty_out(vty, "PIN must be in range 4..8!%s", VTY_NEWLINE); + return CMD_WARNING; + } + + gsm_subscr_sim_pin(ms, (char *)argv[1], "", -1); + + return CMD_SUCCESS; +} + +DEFUN(sim_enable_pin, sim_enable_pin_cmd, "sim enable-pin MS_NAME PIN", + "SIM actions\nEnable PIN of SIM card\nName of MS (see "show ms")\n" + "PIN number") +{ + struct osmocom_ms *ms; + + ms = l23_vty_get_ms(argv[0], vty); + if (!ms) + return CMD_WARNING; + + if (strlen(argv[1]) < 4 || strlen(argv[1]) > 8) { + vty_out(vty, "PIN must be in range 4..8!%s", VTY_NEWLINE); + return CMD_WARNING; + } + + gsm_subscr_sim_pin(ms, (char *)argv[1], "", 1); + + return CMD_SUCCESS; +} + +DEFUN(sim_change_pin, sim_change_pin_cmd, "sim change-pin MS_NAME OLD NEW", + "SIM actions\nChange PIN of SIM card\nName of MS (see "show ms")\n" + "Old PIN number\nNew PIN number") +{ + struct osmocom_ms *ms; + + ms = l23_vty_get_ms(argv[0], vty); + if (!ms) + return CMD_WARNING; + + if (strlen(argv[1]) < 4 || strlen(argv[1]) > 8) { + vty_out(vty, "Old PIN must be in range 4..8!%s", VTY_NEWLINE); + return CMD_WARNING; + } + if (strlen(argv[2]) < 4 || strlen(argv[2]) > 8) { + vty_out(vty, "New PIN must be in range 4..8!%s", VTY_NEWLINE); + return CMD_WARNING; + } + + gsm_subscr_sim_pin(ms, (char *)argv[1], (char *)argv[2], 2); + + return CMD_SUCCESS; +} + +DEFUN(sim_unblock_pin, sim_unblock_pin_cmd, "sim unblock-pin MS_NAME PUC NEW", + "SIM actions\nChange PIN of SIM card\nName of MS (see "show ms")\n" + "Personal Unblock Key\nNew PIN number") +{ + struct osmocom_ms *ms; + + ms = l23_vty_get_ms(argv[0], vty); + if (!ms) + return CMD_WARNING; + + if (strlen(argv[1]) != 8) { + vty_out(vty, "PUC must be 8 digits!%s", VTY_NEWLINE); + return CMD_WARNING; + } + if (strlen(argv[2]) < 4 || strlen(argv[2]) > 8) { + vty_out(vty, "PIN must be in range 4..8!%s", VTY_NEWLINE); + return CMD_WARNING; + } + + gsm_subscr_sim_pin(ms, (char *)argv[1], (char *)argv[2], 99); + + return CMD_SUCCESS; +} + +DEFUN(sim_lai, sim_lai_cmd, "sim lai MS_NAME MCC MNC LAC", + "SIM actions\nChange LAI of SIM card\nName of MS (see "show ms")\n" + "Mobile Country Code\nMobile Network Code\nLocation Area Code " + " (use 0000 to remove LAI)") +{ + struct osmocom_ms *ms; + uint16_t mcc = gsm_input_mcc((char *)argv[1]), + mnc = gsm_input_mnc((char *)argv[2]), + lac = strtoul(argv[3], NULL, 16); + + ms = l23_vty_get_ms(argv[0], vty); + if (!ms) + return CMD_WARNING; + + if (mcc == GSM_INPUT_INVALID) { + vty_out(vty, "Given MCC invalid%s", VTY_NEWLINE); + return CMD_WARNING; + } + if (mnc == GSM_INPUT_INVALID) { + vty_out(vty, "Given MNC invalid%s", VTY_NEWLINE); + return CMD_WARNING; + } + + ms->subscr.mcc = mcc; + ms->subscr.mnc = mnc; + ms->subscr.lac = lac; + ms->subscr.tmsi = GSM_RESERVED_TMSI; + + gsm_subscr_write_loci(ms); + + return CMD_SUCCESS; +} + /* per MS config */ gDEFUN(l23_cfg_ms, l23_cfg_ms_cmd, "ms MS_NAME", "Select a mobile station to configure\nName of MS (see "show ms")") @@ -501,6 +796,37 @@ return CMD_SUCCESS; }
+DEFUN(cfg_ms_sim, cfg_ms_sim_cmd, "sim (none|reader|test|sap)", + "Set SIM card to attach when powering on\nAttach no SIM\n" + "Attach SIM from reader\nAttach build in test SIM\n" + "Attach SIM over SAP interface") +{ + struct osmocom_ms *ms = vty->index; + struct gsm_settings *set = &ms->settings; + + switch (argv[0][0]) { + case 'n': + set->sim_type = GSM_SIM_TYPE_NONE; + break; + case 'r': + set->sim_type = GSM_SIM_TYPE_L1PHY; + break; + case 't': + set->sim_type = GSM_SIM_TYPE_TEST; + break; + case 's': + set->sim_type = GSM_SIM_TYPE_SAP; + break; + default: + vty_out(vty, "unknown SIM type%s", VTY_NEWLINE); + return CMD_WARNING; + } + + l23_vty_restart_required_warn(vty, ms); + + return CMD_SUCCESS; +} + DEFUN(cfg_ms_no_shutdown, cfg_ms_no_shutdown_cmd, "no shutdown", NO_STR "Activate and run MS") { @@ -935,11 +1261,24 @@ install_element_ve(&show_subscr_cmd); install_element_ve(&show_support_cmd);
+ install_element(ENABLE_NODE, &sim_test_cmd); + install_element(ENABLE_NODE, &sim_test_att_cmd); + install_element(ENABLE_NODE, &sim_sap_cmd); + install_element(ENABLE_NODE, &sim_reader_cmd); + install_element(ENABLE_NODE, &sim_remove_cmd); + install_element(ENABLE_NODE, &sim_pin_cmd); + install_element(ENABLE_NODE, &sim_disable_pin_cmd); + install_element(ENABLE_NODE, &sim_enable_pin_cmd); + install_element(ENABLE_NODE, &sim_change_pin_cmd); + install_element(ENABLE_NODE, &sim_unblock_pin_cmd); + install_element(ENABLE_NODE, &sim_lai_cmd); + install_element(CONFIG_NODE, &cfg_hide_default_cmd); install_element(CONFIG_NODE, &cfg_no_hide_default_cmd);
install_node(&ms_node, config_write_ms_node_cb); install_element(MS_NODE, &cfg_ms_layer2_cmd); + install_element(MS_NODE, &cfg_ms_sim_cmd); install_element(MS_NODE, &cfg_ms_testsim_cmd); install_node(&testsim_node, NULL); install_element(TESTSIM_NODE, &cfg_test_imsi_cmd); diff --git a/src/host/layer23/src/mobile/vty_interface.c b/src/host/layer23/src/mobile/vty_interface.c index b6faaed..d05104d 100644 --- a/src/host/layer23/src/mobile/vty_interface.c +++ b/src/host/layer23/src/mobile/vty_interface.c @@ -365,303 +365,6 @@ return CMD_SUCCESS; }
-static int _sim_test_cmd(struct vty *vty, int argc, const char *argv[], - int attached) -{ - struct osmocom_ms *ms; - struct gsm_settings *set; - int rc; - - /* Initial testcard settings */ - uint16_t mcc = 0x001, mnc = 0x01f, lac = 0x0000; - uint32_t tmsi = GSM_RESERVED_TMSI; - - ms = l23_vty_get_ms(argv[0], vty); - if (!ms) - return CMD_WARNING; - - if (ms->subscr.sim_valid) { - vty_out(vty, "SIM already attached, remove first!%s", - VTY_NEWLINE); - return CMD_WARNING; - } - - set = &ms->settings; - if (set->test_rplmn_valid) { - mcc = set->test_rplmn_mcc; - mnc = set->test_rplmn_mnc; - - if (set->test_lac > 0x0000 && set->test_lac < 0xfffe) - lac = set->test_lac; - - if (set->test_tmsi != 0xffffffff) - tmsi = set->test_tmsi; - } - - if (argc == 2) { - vty_out(vty, "Give MNC together with MCC%s", VTY_NEWLINE); - return CMD_WARNING; - } - if (argc >= 3) { - mcc = gsm_input_mcc((char *)argv[1]); - mnc = gsm_input_mnc((char *)argv[2]); - if (mcc == GSM_INPUT_INVALID) { - vty_out(vty, "Given MCC invalid%s", VTY_NEWLINE); - return CMD_WARNING; - } - if (mnc == GSM_INPUT_INVALID) { - vty_out(vty, "Given MNC invalid%s", VTY_NEWLINE); - return CMD_WARNING; - } - } - - if (argc >= 4) - lac = strtoul(argv[3], NULL, 16); - - if (argc >= 5) - tmsi = strtoul(argv[4], NULL, 16); - - rc = gsm_subscr_testcard(ms, mcc, mnc, lac, tmsi, attached); - if (rc < 0) { - vty_out(vty, "Attach test SIM card failed: %d%s", rc, VTY_NEWLINE); - return CMD_WARNING; - } - - return CMD_SUCCESS; -} - -DEFUN(sim_test, sim_test_cmd, - "sim testcard MS_NAME [MCC] [MNC] [LAC] [TMSI]", - "SIM actions\nAttach built in test SIM\nName of MS (see "show ms")\n" - "Optionally set mobile Country Code of RPLMN\n" - "Optionally set mobile Network Code of RPLMN\n" - "Optionally set location area code of RPLMN\n" - "Optionally set current assigned TMSI") -{ - return _sim_test_cmd(vty, argc, argv, 0); -} - -DEFUN(sim_test_att, sim_test_att_cmd, - "sim testcard MS_NAME MCC MNC LAC TMSI attached", - "SIM actions\nAttach built in test SIM\nName of MS (see "show ms")\n" - "Set mobile Country Code of RPLMN\nSet mobile Network Code of RPLMN\n" - "Set location area code\nSet current assigned TMSI\n" - "Indicate to MM that card is already attached") -{ - return _sim_test_cmd(vty, argc, argv, 1); -} - -DEFUN(sim_sap, sim_sap_cmd, "sim sap MS_NAME", - "SIM actions\nAttach SIM over SAP interface\n" - "Name of MS (see "show ms")\n") -{ - struct osmocom_ms *ms; - - ms = l23_vty_get_ms(argv[0], vty); - if (!ms) - return CMD_WARNING; - - if (ms->subscr.sim_valid) { - vty_out(vty, "SIM already attached, remove first!%s", - VTY_NEWLINE); - return CMD_WARNING; - } - - if (gsm_subscr_sapcard(ms) != 0) { - return CMD_WARNING; - } - - return CMD_SUCCESS; -} - -DEFUN(sim_reader, sim_reader_cmd, "sim reader MS_NAME", - "SIM actions\nAttach SIM from reader\nName of MS (see "show ms")") -{ - struct osmocom_ms *ms; - - ms = l23_vty_get_ms(argv[0], vty); - if (!ms) - return CMD_WARNING; - - if (ms->subscr.sim_valid) { - vty_out(vty, "SIM already attached, remove first!%s", - VTY_NEWLINE); - return CMD_WARNING; - } - - gsm_subscr_simcard(ms); - - return CMD_SUCCESS; -} - -DEFUN(sim_remove, sim_remove_cmd, "sim remove MS_NAME", - "SIM actions\nDetach SIM card\nName of MS (see "show ms")") -{ - struct osmocom_ms *ms; - - ms = l23_vty_get_ms(argv[0], vty); - if (!ms) - return CMD_WARNING; - - if (!ms->subscr.sim_valid) { - vty_out(vty, "No SIM attached!%s", VTY_NEWLINE); - return CMD_WARNING; - } - - if (ms->subscr.sim_type == GSM_SIM_TYPE_SAP) { - gsm_subscr_remove_sapcard(ms); - } - - gsm_subscr_remove(ms); - return CMD_SUCCESS; -} - -DEFUN(sim_pin, sim_pin_cmd, "sim pin MS_NAME PIN", - "SIM actions\nEnter PIN for SIM card\nName of MS (see "show ms")\n" - "PIN number") -{ - struct osmocom_ms *ms; - - ms = l23_vty_get_ms(argv[0], vty); - if (!ms) - return CMD_WARNING; - - if (strlen(argv[1]) < 4 || strlen(argv[1]) > 8) { - vty_out(vty, "PIN must be in range 4..8!%s", VTY_NEWLINE); - return CMD_WARNING; - } - - if (!ms->subscr.sim_pin_required) { - vty_out(vty, "No PIN is required at this time!%s", VTY_NEWLINE); - return CMD_WARNING; - } - - gsm_subscr_sim_pin(ms, (char *)argv[1], "", 0); - - return CMD_SUCCESS; -} - -DEFUN(sim_disable_pin, sim_disable_pin_cmd, "sim disable-pin MS_NAME PIN", - "SIM actions\nDisable PIN of SIM card\nName of MS (see "show ms")\n" - "PIN number") -{ - struct osmocom_ms *ms; - - ms = l23_vty_get_ms(argv[0], vty); - if (!ms) - return CMD_WARNING; - - if (strlen(argv[1]) < 4 || strlen(argv[1]) > 8) { - vty_out(vty, "PIN must be in range 4..8!%s", VTY_NEWLINE); - return CMD_WARNING; - } - - gsm_subscr_sim_pin(ms, (char *)argv[1], "", -1); - - return CMD_SUCCESS; -} - -DEFUN(sim_enable_pin, sim_enable_pin_cmd, "sim enable-pin MS_NAME PIN", - "SIM actions\nEnable PIN of SIM card\nName of MS (see "show ms")\n" - "PIN number") -{ - struct osmocom_ms *ms; - - ms = l23_vty_get_ms(argv[0], vty); - if (!ms) - return CMD_WARNING; - - if (strlen(argv[1]) < 4 || strlen(argv[1]) > 8) { - vty_out(vty, "PIN must be in range 4..8!%s", VTY_NEWLINE); - return CMD_WARNING; - } - - gsm_subscr_sim_pin(ms, (char *)argv[1], "", 1); - - return CMD_SUCCESS; -} - -DEFUN(sim_change_pin, sim_change_pin_cmd, "sim change-pin MS_NAME OLD NEW", - "SIM actions\nChange PIN of SIM card\nName of MS (see "show ms")\n" - "Old PIN number\nNew PIN number") -{ - struct osmocom_ms *ms; - - ms = l23_vty_get_ms(argv[0], vty); - if (!ms) - return CMD_WARNING; - - if (strlen(argv[1]) < 4 || strlen(argv[1]) > 8) { - vty_out(vty, "Old PIN must be in range 4..8!%s", VTY_NEWLINE); - return CMD_WARNING; - } - if (strlen(argv[2]) < 4 || strlen(argv[2]) > 8) { - vty_out(vty, "New PIN must be in range 4..8!%s", VTY_NEWLINE); - return CMD_WARNING; - } - - gsm_subscr_sim_pin(ms, (char *)argv[1], (char *)argv[2], 2); - - return CMD_SUCCESS; -} - -DEFUN(sim_unblock_pin, sim_unblock_pin_cmd, "sim unblock-pin MS_NAME PUC NEW", - "SIM actions\nChange PIN of SIM card\nName of MS (see "show ms")\n" - "Personal Unblock Key\nNew PIN number") -{ - struct osmocom_ms *ms; - - ms = l23_vty_get_ms(argv[0], vty); - if (!ms) - return CMD_WARNING; - - if (strlen(argv[1]) != 8) { - vty_out(vty, "PUC must be 8 digits!%s", VTY_NEWLINE); - return CMD_WARNING; - } - if (strlen(argv[2]) < 4 || strlen(argv[2]) > 8) { - vty_out(vty, "PIN must be in range 4..8!%s", VTY_NEWLINE); - return CMD_WARNING; - } - - gsm_subscr_sim_pin(ms, (char *)argv[1], (char *)argv[2], 99); - - return CMD_SUCCESS; -} - -DEFUN(sim_lai, sim_lai_cmd, "sim lai MS_NAME MCC MNC LAC", - "SIM actions\nChange LAI of SIM card\nName of MS (see "show ms")\n" - "Mobile Country Code\nMobile Network Code\nLocation Area Code " - " (use 0000 to remove LAI)") -{ - struct osmocom_ms *ms; - uint16_t mcc = gsm_input_mcc((char *)argv[1]), - mnc = gsm_input_mnc((char *)argv[2]), - lac = strtoul(argv[3], NULL, 16); - - ms = l23_vty_get_ms(argv[0], vty); - if (!ms) - return CMD_WARNING; - - if (mcc == GSM_INPUT_INVALID) { - vty_out(vty, "Given MCC invalid%s", VTY_NEWLINE); - return CMD_WARNING; - } - if (mnc == GSM_INPUT_INVALID) { - vty_out(vty, "Given MNC invalid%s", VTY_NEWLINE); - return CMD_WARNING; - } - - ms->subscr.mcc = mcc; - ms->subscr.mnc = mnc; - ms->subscr.lac = lac; - ms->subscr.tmsi = GSM_RESERVED_TMSI; - - gsm_subscr_write_loci(ms); - - return CMD_SUCCESS; -} - DEFUN(network_select, network_select_cmd, "network select MS_NAME MCC MNC [force]", "Select ...\nSelect Network\nName of MS (see "show ms")\n" @@ -1524,37 +1227,6 @@ return CMD_SUCCESS; }
-DEFUN(cfg_ms_sim, cfg_ms_sim_cmd, "sim (none|reader|test|sap)", - "Set SIM card to attach when powering on\nAttach no SIM\n" - "Attach SIM from reader\nAttach build in test SIM\n" - "Attach SIM over SAP interface") -{ - struct osmocom_ms *ms = vty->index; - struct gsm_settings *set = &ms->settings; - - switch (argv[0][0]) { - case 'n': - set->sim_type = GSM_SIM_TYPE_NONE; - break; - case 'r': - set->sim_type = GSM_SIM_TYPE_L1PHY; - break; - case 't': - set->sim_type = GSM_SIM_TYPE_TEST; - break; - case 's': - set->sim_type = GSM_SIM_TYPE_SAP; - break; - default: - vty_out(vty, "unknown SIM type%s", VTY_NEWLINE); - return CMD_WARNING; - } - - vty_restart_if_started(vty, ms); - - return CMD_SUCCESS; -} - DEFUN(cfg_ms_mode, cfg_ms_mode_cmd, "network-selection-mode (auto|manual)", "Set network selection mode\nAutomatic network selection\n" "Manual network selection") @@ -2659,17 +2331,6 @@ install_element_ve(&no_monitor_network_cmd); install_element(ENABLE_NODE, &off_cmd);
- install_element(ENABLE_NODE, &sim_test_cmd); - install_element(ENABLE_NODE, &sim_test_att_cmd); - install_element(ENABLE_NODE, &sim_sap_cmd); - install_element(ENABLE_NODE, &sim_reader_cmd); - install_element(ENABLE_NODE, &sim_remove_cmd); - install_element(ENABLE_NODE, &sim_pin_cmd); - install_element(ENABLE_NODE, &sim_disable_pin_cmd); - install_element(ENABLE_NODE, &sim_enable_pin_cmd); - install_element(ENABLE_NODE, &sim_change_pin_cmd); - install_element(ENABLE_NODE, &sim_unblock_pin_cmd); - install_element(ENABLE_NODE, &sim_lai_cmd); install_element(ENABLE_NODE, &network_search_cmd); install_element(ENABLE_NODE, &network_show_cmd); install_element(ENABLE_NODE, &network_select_cmd); @@ -2700,7 +2361,6 @@ install_element(MS_NODE, &cfg_ms_mncc_sock_cmd); install_element(MS_NODE, &cfg_ms_mncc_handler_cmd); install_element(MS_NODE, &cfg_ms_no_mncc_handler_cmd); - install_element(MS_NODE, &cfg_ms_sim_cmd); install_element(MS_NODE, &cfg_ms_mode_cmd); install_element(MS_NODE, &cfg_ms_imei_cmd); install_element(MS_NODE, &cfg_ms_imei_fixed_cmd);