Change in osmo-e1-hardware[master]: icE1usb fw: Add device request to read/write I2C device registers

laforge has submitted this change. ( https://gerrit.osmocom.org/c/osmo-e1-hardware/+/30066 ) Change subject: icE1usb fw: Add device request to read/write I2C device registers ...................................................................... icE1usb fw: Add device request to read/write I2C device registers Signed-off-by: Sylvain Munaut &lt;tnt(a)246tNt.com&gt; Change-Id: I55a72762d535827a51e5ea1775e9abbd116bc8a8 --- M firmware/ice40-riscv/icE1usb/ice1usb_proto.h M firmware/ice40-riscv/icE1usb/usb_dev.c 2 files changed, 14 insertions(+), 0 deletions(-) Approvals: Jenkins Builder: Verified laforge: Looks good to me, approved diff --git a/firmware/ice40-riscv/icE1usb/ice1usb_proto.h b/firmware/ice40-riscv/icE1usb/ice1usb_proto.h index 5b65d76..8cf8439 100644 --- a/firmware/ice40-riscv/icE1usb/ice1usb_proto.h +++ b/firmware/ice40-riscv/icE1usb/ice1usb_proto.h @@ -20,6 +20,10 @@ /*! returns a string describing the firmware version */ #define ICE1USB_DEV_GET_FW_BUILD 0x02 +/*! performs an I2C register access (read/write depends on direction) */ +#define ICE1USB_DEV_I2C_REG_ACCESS 0x10 + + enum e1usb_dev_capability { /*! Does this board have a GPS-DO */ ICE1USB_DEV_CAP_GPSDO, diff --git a/firmware/ice40-riscv/icE1usb/usb_dev.c b/firmware/ice40-riscv/icE1usb/usb_dev.c index e834142..da1e7f2 100644 --- a/firmware/ice40-riscv/icE1usb/usb_dev.c +++ b/firmware/ice40-riscv/icE1usb/usb_dev.c @@ -12,6 +12,7 @@ #include <no2usb/usb_proto.h> #include "console.h" +#include "i2c.h" #include "misc.h" #include "ice1usb_proto.h" @@ -24,6 +25,10 @@ _usb_dev_ctrl_req_write(struct usb_ctrl_req *req, struct usb_xfer *xfer) { switch (req->bRequest) { + case ICE1USB_DEV_I2C_REG_ACCESS: + if (!i2c_write_reg((req->wIndex >> 8), req->wIndex & 0xff, req->wValue & 0xff)) + return USB_FND_ERROR; + break; default: return USB_FND_ERROR; } @@ -43,6 +48,11 @@ xfer->data = (void*) fw_build_str; xfer->len = strlen(fw_build_str); break; + case ICE1USB_DEV_I2C_REG_ACCESS: + if (!i2c_read_reg((req->wIndex >> 8), req->wIndex & 0xff, &xfer->data[0])) + return USB_FND_ERROR; + xfer->len = 1; + break; default: return USB_FND_ERROR; } -- To view, visit https://gerrit.osmocom.org/c/osmo-e1-hardware/+/30066 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-e1-hardware Gerrit-Branch: master Gerrit-Change-Id: I55a72762d535827a51e5ea1775e9abbd116bc8a8 Gerrit-Change-Number: 30066 Gerrit-PatchSet: 2 Gerrit-Owner: tnt &lt;tnt(a)246tNt.com&gt; Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge &lt;laforge(a)osmocom.org&gt; Gerrit-MessageType: merged