Change in simtrace2[master]: firmware/sniffer: Log parity errors, just like overruns and framing e...

laforge has submitted this change. ( https://gerrit.osmocom.org/c/simtrace2/+/30176 ) Change subject: firmware/sniffer: Log parity errors, just like overruns and framing errors ...................................................................... firmware/sniffer: Log parity errors, just like overruns and framing errors Reading of code + datasheet showed that we did enable parity checking but never actually checked if the USART has the PARE bit in CSR set. Let's change that. Plus also avoid possible race conditions due to multiple status resets via US_CR_RSTSTA. Let's only reset that once per interrupt handler. TODO: actually do something useful at that point. We currently don't report those to the host, nor do we attempt to recover in any way. The data sheet also doesn't tell us what it actually does in such situations; it appears the character is *not* returned from the USART, so we're missing one byte in the stream at that point. Change-Id: I5f012d86c61a2377d355396e7b95d078952bee7c Related: OS#5464 --- M firmware/libcommon/source/sniffer.c 1 file changed, 7 insertions(+), 7 deletions(-) Approvals: laforge: Looks good to me, approved Hoernchen: Looks good to me, but someone else must approve Jenkins Builder: Verified diff --git a/firmware/libcommon/source/sniffer.c b/firmware/libcommon/source/sniffer.c index 86dfd3a..13ef506 100644 --- a/firmware/libcommon/source/sniffer.c +++ b/firmware/libcommon/source/sniffer.c @@ -800,14 +800,14 @@ /* Read channel status register */ uint32_t csr = sniff_usart.base->US_CSR; /* Verify if there was an error */ - if (csr & US_CSR_OVRE) { - TRACE_WARNING("USART overrun error\n\r"); + if (csr & US_CSR_OVRE) + TRACE_ERROR("USART overrun error\n\r"); + if (csr & US_CSR_FRAME) + TRACE_ERROR("USART framing error\n\r"); + if (csr & US_CSR_PARE) + TRACE_ERROR("USART parity error\n\r"); + if (csr & (US_CSR_OVRE|US_CSR_FRAME|US_CSR_PARE)) sniff_usart.base->US_CR |= US_CR_RSTSTA; - } - if (csr & US_CSR_FRAME) { - TRACE_WARNING("USART framing error\n\r"); - sniff_usart.base->US_CR |= US_CR_RSTSTA; - } /* Verify if character has been received */ if (csr & US_CSR_RXRDY) { -- To view, visit https://gerrit.osmocom.org/c/simtrace2/+/30176 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: simtrace2 Gerrit-Branch: master Gerrit-Change-Id: I5f012d86c61a2377d355396e7b95d078952bee7c Gerrit-Change-Number: 30176 Gerrit-PatchSet: 2 Gerrit-Owner: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: Hoernchen <ewild(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Reviewer: tsaitgaist <kredon(a)sysmocom.de> Gerrit-MessageType: merged