Attention is currently required from: laforge, tnt.
Hello Jenkins Builder, tnt,
I'd like you to reexamine a change. Please visit
https://gerrit.osmocom.org/c/osmo-e1-hardware/+/29948
to look at the new patch set (#2).
Change subject: fw/e1-tracer: Additional USB configuration for "osmo-e1d compatible
mode"
......................................................................
fw/e1-tracer: Additional USB configuration for "osmo-e1d compatible mode"
This adds a second USB configuration to the e1-tracer firmware. This
configuration is closer to the USB configuration of an icE1usb and hence
paves the way for using osmo-e1d with the tracer.
The main conceptual difference between the existing "legacy"
configuration and this new "e1d compatible" configuration is to have two
USB interfaces, one for each direction of the traced E1 interface. Each
interface has its own separate two altsettings, one for the disabled
and one for the enabled state.
Unmodified osmo-e1d will not work straight away with this, as it expects
ISO OUT and ISU Feedback endpoints, which a pure rx-only tracing device
of course doesn't have.
Related: OS#5733
Change-Id: I97062b9f12317b1b9b3855409c2380108cb921ff
---
M firmware/ice40-riscv/e1-tracer/usb_desc_app.c
M firmware/ice40-riscv/e1-tracer/usb_e1.c
M firmware/ice40-riscv/e1-tracer/usb_str_app.txt
3 files changed, 264 insertions(+), 67 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-e1-hardware refs/changes/48/29948/2
--
To view, visit
https://gerrit.osmocom.org/c/osmo-e1-hardware/+/29948
To unsubscribe, or for help writing mail filters, visit
https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-e1-hardware
Gerrit-Branch: master
Gerrit-Change-Id: I97062b9f12317b1b9b3855409c2380108cb921ff
Gerrit-Change-Number: 29948
Gerrit-PatchSet: 2
Gerrit-Owner: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: tnt <tnt(a)246tNt.com>
Gerrit-Attention: laforge <laforge(a)osmocom.org>
Gerrit-Attention: tnt <tnt(a)246tNt.com>
Gerrit-MessageType: newpatchset