[L] Change in docker-playground[master]: ttcn3-pgw-test: update open5gs-{nrf,smf,upf} config files

fixeria has submitted this change. ( https://gerrit.osmocom.org/c/docker-playground/+/31422 ) Change subject: ttcn3-pgw-test: update open5gs-{nrf,smf,upf} config files ...................................................................... ttcn3-pgw-test: update open5gs-{nrf,smf,upf} config files As stated in the ticket, both open5gs-{nrf,smf} daemons refuse to start since build #326 because of the following error: [sbi] ERROR: TLS enabled but no server key (../lib/sbi/context.c:186) The problem is that the recent open5gs (v2.6.0-39-g22be888 at the moment of writing) is attempting to employ TLS verification for SBI even if it's not explicitly configured in the config files. commit 05fbaf69587488e53b5e741a9ada9f9fa5749322 Author: Sukchan Lee &lt;acetcom(a)gmail.com&gt; Date: Sat Feb 18 10:58:29 2023 +0900 [SBI] HTTP2-TLS verification - ConfFile Changed Our config files are slightly outdated, so let's take a chance to update them and specify the missing TLS params. Check out open5gs-{nrf,smf,upf}.yaml from the latest git version. The updated files are confirmed to work with both: * latest release for Debian v2.5.8, and * latest git version v2.6.0-39-g22be888. Change-Id: I27adbab6a6b95ddf4c6d39803e4f7dd079f11a4c Related: OS#5913 --- M ttcn3-pgw-test/open5gs-nrf.yaml M ttcn3-pgw-test/open5gs-smf.yaml M ttcn3-pgw-test/open5gs-upf.yaml 3 files changed, 750 insertions(+), 174 deletions(-) Approvals: Jenkins Builder: Verified osmith: Looks good to me, but someone else must approve pespin: Looks good to me, but someone else must approve fixeria: Looks good to me, approved diff --git a/ttcn3-pgw-test/open5gs-nrf.yaml b/ttcn3-pgw-test/open5gs-nrf.yaml index 4743377..a7b615f 100644 --- a/ttcn3-pgw-test/open5gs-nrf.yaml +++ b/ttcn3-pgw-test/open5gs-nrf.yaml @@ -6,64 +6,191 @@ # o Set OGS_LOG_INFO to all domain level # - If `level` is omitted, the default level is OGS_LOG_INFO) # - If `domain` is omitted, the all domain level is set from 'level' -# (Nothing is needed) +# (Default values are used, so no configuration is required) # # o Set OGS_LOG_ERROR to all domain level # - `level` can be set with none, fatal, error, warn, info, debug, trace +# logger: # level: error # # o Set OGS_LOG_DEBUG to mme/emm domain level +# logger: # level: debug # domain: mme,emm # # o Set OGS_LOG_TRACE to all domain level +# logger: # level: trace -# domain: core,sbi,nrf,event,mem,sock +# domain: core,sbi,ausf,event,tlv,mem,sock # logger: level: info # -# nrf: +# o TLS enable/disable +# sbi: +# server|client: +# no_tls: false|true +# - false: (Default) Use TLS +# - true: TLS disabled +# +# o Verification enable/disable +# sbi: +# server|client: +# no_verify: false|true +# - false: (Default) Verify the PEER +# - true: Skip the verification step +# +# o Server-side does not use TLS +# sbi: +# server: +# no_tls: true +# +# o Client-side skips the verification step +# sbi: +# client: +# no_verify: true +# key: /etc/open5gs/tls/amf.key +# cert: /etc/open5gs/tls/amf.crt +# +# o Use the specified certificate while verifying the client +# sbi: +# server +# cacert: /etc/open5gs/tls/ca.crt +# +# o Use the specified certificate while verifying the server +# sbi: +# client +# cacert: /etc/open5gs/tls/ca.crt +# +sbi: + server: + no_tls: true + cacert: /etc/open5gs/tls/ca.crt + key: /etc/open5gs/tls/nrf.key + cert: /etc/open5gs/tls/nrf.crt + client: + no_tls: true + cacert: /etc/open5gs/tls/ca.crt + key: /etc/open5gs/tls/nrf.key + cert: /etc/open5gs/tls/nrf.crt + # # <SBI Server> # # o SBI Server(http://<all address available>:80) +# sbi: +# server: +# no_tls: true +# nrf: # sbi: # # o SBI Server(http://<any address>:7777) +# sbi: +# server: +# no_tls: true +# nrf: # sbi: # - addr: # - 0.0.0.0 # - ::0 # port: 7777 # -# o SBI Server(https://<all address avaiable>:443) +# o SBI Server(https://<all address available>:443) +# sbi: +# server: +# key: /etc/open5gs/tls/nrf.key +# cert: /etc/open5gs/tls/nrf.crt +# nrf: # sbi: -# tls: -# key: nrf.key -# pem: nrf.pem # -# o SBI Server(https://127.0.0.10:443, http://[::1]:80) +# o SBI Server(https://127.0.0.10:443, https://[::1]:443) without verification +# sbi: +# server: +# no_verify: true +# key: /etc/open5gs/tls/nrf.key +# cert: /etc/open5gs/tls/nrf.crt +# nrf: # sbi: # - addr: 127.0.0.10 -# tls: -# key: nrf.key -# pem: nrf.pem # - addr: ::1 # -# o SBI Server(http://nrf.open5gs.org:80) +# o SBI Server(https://nrf.open5gs.org:443) +# Use the specified certificate while verifying the client +# +# sbi: +# server: +# cacert: /etc/open5gs/tls/ca.crt +# key: /etc/open5gs/tls/nrf.key +# cert: /etc/open5gs/tls/nrf.crt +# nrf: # sbi: -# name: nrf.open5gs.org +# - name: nrf.open5gs.org # # o SBI Server(http://127.0.0.10:7777) +# sbi: +# server: +# no_tls: true +# nrf: # sbi: # - addr: 127.0.0.10 # port: 7777 # # o SBI Server(http://<eth0 IP address>:80) +# sbi: +# server: +# no_tls: true +# nrf: # sbi: -# dev: eth0 +# - dev: eth0 +# +# o Provide custom SBI address to be advertised to NRF +# sbi: +# server: +# no_tls: true +# nrf: +# sbi: +# - dev: eth0 +# advertise: open5gs-nrf.svc.local +# +# o Another example of advertising on NRF +# sbi: +# server: +# no_tls: true +# nrf: +# sbi: +# - addr: localhost +# advertise: +# - 127.0.0.99 +# - ::1 +# +# o SBI Option (Default) +# - tcp_nodelay : true +# - so_linger.l_onoff : false +# +# sbi: +# server: +# no_tls: true +# nrf: +# sbi: +# addr: 127.0.0.10 +# option: +# tcp_nodelay: false +# so_linger: +# l_onoff: true +# l_linger: 10 +# +# <NF Service> +# +# o NF Service Name(Default : all NF services available) +# nrf: +# service_name: +# +# o NF Service Name(Only some NF services are available) +# nrf: +# service_name: +# - nnrf-nfm +# - nnrf-disc # nrf: sbi: @@ -72,88 +199,142 @@ port: 7777 # -# parameter: +# <SBI Client>> # -# o Number of output streams per SCTP associations. -# sctp_streams: 30 +# o SBI Client(http://127.0.1.10:7777) +# sbi: +# client: +# no_tls: true +# scp: +# sbi: +# addr: 127.0.1.10 +# port: 7777 +# +# o SBI Client(https://127.0.1.10:443, https://[::1]:443) without verification +# sbi: +# client: +# no_verify: true +# key: /etc/open5gs/tls/amf.key +# cert: /etc/open5gs/tls/amf.crt +# scp: +# sbi: +# - addr: 127.0.1.10 +# - addr: ::1 +# +# o SBI Client(https://scp.open5gs.org:443) +# Use the specified certificate while verifying the server +# +# sbi: +# client: +# cacert: /etc/open5gs/tls/ca.crt +# key: /etc/open5gs/tls/amf.key +# cert: /etc/open5gs/tls/amf.crt +# scp: +# sbi: +# - name: scp.open5gs.org +# +# o SBI Client(http://[fd69:f21d:873c:fb::1]:80) +# If prefer_ipv4 is true, http://127.0.1.10:80 is selected. +# +# sbi: +# client: +# no_tls: true +# scp: +# sbi: +# addr: +# - 127.0.1.10 +# - fd69:f21d:873c:fb::1 +# +# o SBI Option (Default) +# - tcp_nodelay : true +# - so_linger.l_onoff : false +# +# sbi: +# client: +# no_tls: true +# scp: +# sbi: +# addr: 127.0.1.10 +# option: +# tcp_nodelay: false +# so_linger: +# l_onoff: true +# l_linger: 10 +# +# +scp: + sbi: + - addr: 127.0.1.10 + port: 7777 + + # # o Disable use of IPv4 addresses (only IPv6) -# no_ipv4: true +# parameter: +# no_ipv4: true # # o Disable use of IPv6 addresses (only IPv4) -# no_ipv6: true +# parameter: +# no_ipv6: true # # o Prefer IPv4 instead of IPv6 for estabishing new GTP connections. -# prefer_ipv4: true +# parameter: +# prefer_ipv4: true # parameter: # -# max: -# -# o Maximum Number of UE per AMF/MME +# o Maximum Number of UE +# max: # ue: 1024 -# o Maximum Number of gNB/eNB per AMF/MME -# gnb: 64 +# +# o Maximum Number of Peer(S1AP/NGAP, DIAMETER, GTP, PFCP or SBI) +# max: +# peer: 64 # max: # -# pool: -# -# o The default memory pool size was set assuming 1024 UEs. -# To connect more UEs, you need to increase the size further. -# -# - Pool-size 128 => 65536 Number -# - Pool-size 256 => 16384 Number -# - Pool-size 512 => 4096 Number -# - Pool-size 1024 => 1024 Number -# - Pool-size 2048 => 512 Number -# - Pool-size 8192 => 128 Number -# - Pool-size 1024*1024 => 8 Number -# -# 128: 65536 -# 256: 16384 -# 512: 4096 -# 1024: 1024 -# 2048: 512 -# 8192: 128 -# big: 8 -# -pool: - -# -# time: # # o NF Instance Heartbeat (Default : 10 seconds) +# (Default values are used, so no configuration is required) # # o NF Instance Heartbeat (Disabled) +# time: # nf_instance: # heartbeat: 0 # # o NF Instance Heartbeat (5 seconds) +# time: # nf_instance: # heartbeat: 5 # # o NF Instance Validity (Default : 3600 seconds = 1 hour) +# (Default values are used, so no configuration is required) # # o NF Instance Validity (10 seconds) +# time: # nf_instance: # validity: 10 # # o Subscription Validity (Default : 86400 seconds = 1 day) +# (Default values are used, so no configuration is required) # # o Subscription Validity (Disabled) +# time: # subscription: # validity: 0 # # o Subscription Validity (3600 seconds = 1 hour) +# time: # subscription: # validity: 3600 # # o Message Wait Duration (Default : 10,000 ms = 10 seconds) +# (Default values are used, so no configuration is required) # # o Message Wait Duration (3000 ms) +# time: # message: # duration: 3000 time: diff --git a/ttcn3-pgw-test/open5gs-smf.yaml b/ttcn3-pgw-test/open5gs-smf.yaml index ac8bd80..f75a6e6 100644 --- a/ttcn3-pgw-test/open5gs-smf.yaml +++ b/ttcn3-pgw-test/open5gs-smf.yaml @@ -1,92 +1,282 @@ # -# logger: -# # o Set OGS_LOG_INFO to all domain level # - If `level` is omitted, the default level is OGS_LOG_INFO) # - If `domain` is omitted, the all domain level is set from 'level' -# (Nothing is needed) +# (Default values are used, so no configuration is required) # # o Set OGS_LOG_ERROR to all domain level # - `level` can be set with none, fatal, error, warn, info, debug, trace +# logger: # level: error # # o Set OGS_LOG_DEBUG to mme/emm domain level +# logger: # level: debug # domain: mme,emm # # o Set OGS_LOG_TRACE to all domain level +# logger: # level: trace -# domain: core,pfcp,fd,pfcp,gtp,smf,event,tlv,mem,sock +# domain: core,sbi,ausf,event,tlv,mem,sock # logger: level: info # -# smf: +# o TLS enable/disable +# sbi: +# server|client: +# no_tls: false|true +# - false: (Default) Use TLS +# - true: TLS disabled +# +# o Verification enable/disable +# sbi: +# server|client: +# no_verify: false|true +# - false: (Default) Verify the PEER +# - true: Skip the verification step +# +# o Server-side does not use TLS +# sbi: +# server: +# no_tls: true +# +# o Client-side skips the verification step +# sbi: +# client: +# no_verify: true +# key: /etc/open5gs/tls/amf.key +# cert: /etc/open5gs/tls/amf.crt +# +# o Use the specified certificate while verifying the client +# sbi: +# server +# cacert: /etc/open5gs/tls/ca.crt +# +# o Use the specified certificate while verifying the server +# sbi: +# client +# cacert: /etc/open5gs/tls/ca.crt +# +sbi: + server: + no_tls: true + cacert: /etc/open5gs/tls/ca.crt + key: /etc/open5gs/tls/smf.key + cert: /etc/open5gs/tls/smf.crt + client: + no_tls: true + cacert: /etc/open5gs/tls/ca.crt + key: /etc/open5gs/tls/smf.key + cert: /etc/open5gs/tls/smf.crt + # # <SBI Server> # # o SBI Server(http://<all address available>:80) +# sbi: +# server: +# no_tls: true +# smf: # sbi: # -# o SBI Server(http://<any address>:80) +# o SBI Server(http://<any address>:7777) +# sbi: +# server: +# no_tls: true +# smf: # sbi: # - addr: # - 0.0.0.0 # - ::0 # port: 7777 # -# o SBI Server(https://<all address avaiable>:443) +# o SBI Server(https://<all address available>:443) +# sbi: +# server: +# key: /etc/open5gs/tls/smf.key +# cert: /etc/open5gs/tls/smf.crt +# smf: # sbi: -# - tls: -# key: smf.key -# pem: smf.pem # -# o SBI Server(https://127.0.0.4:443, http://[::1]:80) +# o SBI Server(https://127.0.0.4:443, https://[::1]:443) without verification +# sbi: +# server: +# no_verify: true +# key: /etc/open5gs/tls/smf.key +# cert: /etc/open5gs/tls/smf.crt +# smf: # sbi: # - addr: 127.0.0.4 -# tls: -# key: smf.key -# pem: smf.pem # - addr: ::1 # -# o SBI Server(http://smf.open5gs.org:80) +# o SBI Server(https://smf.open5gs.org:443) +# Use the specified certificate while verifying the client +# +# sbi: +# server: +# cacert: /etc/open5gs/tls/ca.crt +# key: /etc/open5gs/tls/smf.key +# cert: /etc/open5gs/tls/smf.crt +# smf: # sbi: # - name: smf.open5gs.org # # o SBI Server(http://127.0.0.4:7777) +# sbi: +# server: +# no_tls: true +# smf: # sbi: # - addr: 127.0.0.4 # port: 7777 # # o SBI Server(http://<eth0 IP address>:80) +# sbi: +# server: +# no_tls: true +# smf: # sbi: # - dev: eth0 # # o Provide custom SBI address to be advertised to NRF +# sbi: +# server: +# no_tls: true +# smf: # sbi: # - dev: eth0 # advertise: open5gs-smf.svc.local # +# o Another example of advertising on NRF +# sbi: +# server: +# no_tls: true +# smf: # sbi: # - addr: localhost # advertise: # - 127.0.0.99 # - ::1 # +# o SBI Option (Default) +# - tcp_nodelay : true +# - so_linger.l_onoff : false +# +# sbi: +# server: +# no_tls: true +# smf: +# sbi: +# addr: 127.0.0.4 +# option: +# tcp_nodelay: false +# so_linger: +# l_onoff: true +# l_linger: 10 +# +# +# <NF Service> +# +# o NF Service Name(Default : all NF services available) +# smf: +# service_name: +# +# o NF Service Name(Only some NF services are available) +# smf: +# service_name: +# - nsmf-pdusession +# +# <NF Discovery Query Parameter> +# +# o (Default) If you do not set Query Parameter as shown below, +# +# sbi: +# server: +# no_tls: true +# smf: +# sbi: +# - addr: 127.0.0.4 +# port: 7777 +# +# - 'service-names' is included. +# +# o Service-Names are not included +# sbi: +# server: +# no_tls: true +# smf: +# sbi: +# - addr: 127.0.0.4 +# port: 7777 +# discovery: +# option: +# no_service_names: false +# +# o To remove 'service-names' from URI query parameters in NS Discovery +# no_service_names: true +# +# * For Indirect Communication with Delegated Discovery, +# 'service-names' is always included in the URI query parameter. +# * That is, 'no_service_names' has no effect. +# +# <For Indirect Communication with Delegated Discovery> +# +# o (Default) If you do not set Delegated Discovery as shown below, +# +# sbi: +# server: +# no_tls: true +# smf: +# sbi: +# - addr: 127.0.0.4 +# port: 7777 +# +# - Use SCP if SCP available. Otherwise NRF is used. +# => App fails if both NRF and SCP are unavailable. +# +# sbi: +# server: +# no_tls: true +# smf: +# sbi: +# - addr: 127.0.0.4 +# port: 7777 +# discovery: +# delegated: auto +# +# o To use SCP always => App fails if no SCP available. +# delegated: yes +# +# o Don't use SCP server => App fails if no NRF available. +# delegated: no +# # <PFCP Server> # # o PFCP Server(127.0.0.4:8805, ::1:8805) +# smf: # pfcp: # - addr: 127.0.0.4 # - addr: ::1 # # o PFCP-U Server(127.0.0.1:2152, [::1]:2152) +# smf: # pfcp: # name: localhost # +# o PFCP Option (Default) +# - so_bindtodevice : NULL +# +# smf: +# pfcp: +# addr: 127.0.0.4 +# option: +# so_bindtodevice: vrf-blue +# # <GTP-C Server> # # o GTP-C Server(127.0.0.4:2123, [fd69:f21d:873c:fa::3]:2123) +# smf: # gtpc: # addr: # - 127.0.0.4 @@ -94,35 +284,59 @@ # # o On SMF, Same configuration # (127.0.0.4:2123, [fd69:f21d:873c:fa::3]:2123). +# smf: # gtpc: # - addr: 127.0.0.4 # - addr: fd69:f21d:873c:fa::3 # +# o GTP-C Option (Default) +# - so_bindtodevice : NULL +# +# smf: +# gtpc: +# addr: 127.0.0.4 +# option: +# so_bindtodevice: vrf-blue +# # <GTP-U Server>> # # o GTP-U Server(127.0.0.4:2152, [::1]:2152) +# smf: # gtpu: # - addr: 127.0.0.4 # - addr: ::1 # # o GTP-U Server(127.0.0.1:2152, [::1]:2152) +# smf: # gtpu: # name: localhost # +# o GTP-U Option (Default) +# - so_bindtodevice : NULL +# +# smf: +# gtpu: +# addr: 127.0.0.4 +# option: +# so_bindtodevice: vrf-blue +# # <Metrics Server> # # o Metrics Server(http://<any address>:9090) +# smf: # metrics: -# addr: 0.0.0.0 -# port: 9090 +# - addr: 0.0.0.0 +# port: 9090 # # <Subnet for UE Pool> # # o IPv4 Pool +# smf: # subnet: # addr: 10.45.0.1/16 # # o IPv4/IPv6 Pool +# smf: # subnet: # - addr: 10.45.0.1/16 # - addr: 2001:db8:cafe::1/48 @@ -131,6 +345,7 @@ # o Specific DNN/APN(e.g 'ims') uses 10.46.0.1/16, 2001:db8:babe::1/48 # ; If the UE has unknown DNN/APN(not internet/ims), SMF/UPF will crash. # +# smf: # subnet: # - addr: 10.45.0.1/16 # dnn: internet @@ -144,6 +359,7 @@ # o Specific DNN/APN with the FALLBACK SUBNET(10.47.0.1/16) # ; Note that put the FALLBACK SUBNET last to avoid SMF/UPF crash. # +# smf: # subnet: # - addr: 10.45.0.1/16 # dnn: internet @@ -152,22 +368,26 @@ # - addr: 10.50.0.1/16 ## FALLBACK SUBNET # # o Pool Range Sample +# smf: # subnet: # - addr: 10.45.0.1/24 # range: 10.45.0.100-10.45.0.200 # +# smf: # subnet: # - addr: 10.45.0.1/24 # range: # - 10.45.0.5-10.45.0.50 # - 10.45.0.100- # +# smf: # subnet: # - addr: 10.45.0.1/24 # range: # - -10.45.0.200 # - 10.45.0.210-10.45.0.220 # +# smf: # subnet: # - addr: 10.45.0.1/16 # range: @@ -182,6 +402,7 @@ # # o Primary/Secondary can be configured. Others are ignored. # +# smf: # dns: # - 8.8.8.8 # - 8.8.4.4 @@ -200,10 +421,25 @@ # # o Proxy Call Session Control Function # +# smf: # p-cscf: # - 127.0.0.1 # - ::1 # +# <CTF> +# +# o Gy interface parameters towards OCS. +# o enabled: +# o auto: Default. Use Gy only if OCS available among Diameter peers +# o yes: Use Gy always; +# reject subscribers if no OCS available among Diameter peers +# o no: Don't use Gy interface if there is an OCS available +# +# smf: +# ctf: +# enabled: auto|yes|no +# +# # <SMF Selection - 5G Core only> # 1. SMF sends SmfInfo(S-NSSAI, DNN, TAI) to the NRF # 2. NRF responds to AMF with SmfInfo during NF-Discovery. @@ -212,6 +448,7 @@ # Note that if there is no SmfInfo, any AMF can select this SMF. # # o S-NSSAI[SST:1] and DNN[internet] - At least 1 DNN is required in S-NSSAI +# smf: # info: # - s_nssai: # - sst: 1 @@ -219,6 +456,7 @@ # - internet # # o S-NSSAI[SST:1 SD:009000] and DNN[internet or ims] +# smf: # info: # - s_nssai: # - sst: 1 @@ -227,7 +465,8 @@ # - internet # - ims # -# o S-NSSAI[SST:1] and DNN[internet] and TAI[PLMN-ID:90170 TAC:1] +# o S-NSSAI[SST:1] and DNN[internet] and TAI[PLMN-ID:99970 TAC:1] +# smf: # info: # - s_nssai: # - sst: 1 @@ -235,15 +474,16 @@ # - internet # tai: # - plmn_id: -# mcc: 901 +# mcc: 999 # mnc: 70 # tac: 1 # # o If any of conditions below are met: -# - S-NSSAI[SST:1] and DNN[internet] and TAI[PLMN-ID:90170 TAC:1-9] +# - S-NSSAI[SST:1] and DNN[internet] and TAI[PLMN-ID:99970 TAC:1-9] # - S-NSSAI[SST:2 SD:000080] and DNN[internet or ims] -# - S-NSSAI[SST:4] and DNN[internet] and TAI[PLMN-ID:90170 TAC:10-20,30-40] +# - S-NSSAI[SST:4] and DNN[internet] and TAI[PLMN-ID:99970 TAC:10-20,30-40] # +# smf: # info: # - s_nssai: # - sst: 1 @@ -251,7 +491,7 @@ # - internet # tai: # - plmn_id: -# mcc: 901 +# mcc: 999 # mnc: 70 # range: # - 1-9 @@ -267,13 +507,14 @@ # - internet # tai: # - plmn_id: -# mcc: 901 +# mcc: 999 # mnc: 70 # range: # - 10-20 # - 30-40 # # o Complex Example +# smf: # info: # - s_nssai: # - sst: 1 @@ -297,27 +538,27 @@ # - internet # tai: # - plmn_id: -# mcc: 901 +# mcc: 999 # mnc: 70 # tac: [1, 2, 3] # - plmn_id: -# mcc: 901 +# mcc: 999 # mnc: 70 # tac: 4 # - plmn_id: -# mcc: 901 +# mcc: 999 # mnc: 70 # tac: # - 5 # - 6 # - plmn_id: -# mcc: 901 +# mcc: 999 # mnc: 70 # range: # - 100-200 # - 300-400 # - plmn_id: -# mcc: 901 +# mcc: 999 # mnc: 70 # range: # - 500-600 @@ -329,11 +570,25 @@ # - internet # tai: # - plmn_id: -# mcc: 901 +# mcc: 999 # mnc: 70 # tac: 99 # - +# <Security Indication - 5G Core only> +# +# According to 3GPP TS38.413 Section 9.3.1.27, +# Security Indication IE may be instructed to 5G gNB. +# +# If you set the security_indication in smf.yaml, +# this information is delivered using PDU Session Resource Request Transfer IE +# +# smf: +# security_indication: +# integrity_protection_indication: required|preferred|not-needed +# confidentiality_protection_indication: required|preferred|not-needed +# maximum_integrity_protected_data_rate_uplink: bitrate64kbs|maximum-UE-rate +# maximum_integrity_protected_data_rate_downlink: bitrate64kbs|maximum-UE-rate +# smf: sbi: - addr: 172.18.18.4 @@ -358,24 +613,112 @@ - 2001:4860:4860::8888 - 2001:4860:4860::8844 mtu: 1400 + ctf: + enabled: auto freeDiameter: /data/freeDiameter-smf.conf # -# nrf: +# <SBI Client>> +# +# o SBI Client(http://127.0.1.10:7777) +# sbi: +# client: +# no_tls: true +# scp: +# sbi: +# addr: 127.0.1.10 +# port: 7777 +# +# o SBI Client(https://127.0.1.10:443, https://[::1]:443) without verification +# sbi: +# client: +# no_verify: true +# key: /etc/open5gs/tls/amf.key +# cert: /etc/open5gs/tls/amf.crt +# scp: +# sbi: +# - addr: 127.0.1.10 +# - addr: ::1 +# +# o SBI Client(https://scp.open5gs.org:443) +# Use the specified certificate while verifying the server +# +# sbi: +# client: +# cacert: /etc/open5gs/tls/ca.crt +# key: /etc/open5gs/tls/amf.key +# cert: /etc/open5gs/tls/amf.crt +# scp: +# sbi: +# - name: scp.open5gs.org +# +# o SBI Client(http://[fd69:f21d:873c:fb::1]:80) +# If prefer_ipv4 is true, http://127.0.1.10:80 is selected. +# +# sbi: +# client: +# no_tls: true +# scp: +# sbi: +# addr: +# - 127.0.1.10 +# - fd69:f21d:873c:fb::1 +# +# o SBI Option (Default) +# - tcp_nodelay : true +# - so_linger.l_onoff : false +# +# sbi: +# client: +# no_tls: true +# scp: +# sbi: +# addr: 127.0.1.10 +# option: +# tcp_nodelay: false +# so_linger: +# l_onoff: true +# l_linger: 10 +# +# +scp: + sbi: + - addr: 127.0.1.10 + port: 7777 + # # <SBI Client>> # -# o SBI Client(http://127.0.0.1:7777) +# o SBI Client(http://127.0.0.10:7777) +# sbi: +# client: +# no_tls: true +# nrf: # sbi: # addr: 127.0.0.10 # port: 7777 # -# o SBI Client(https://127.0.0.10:443, http://nrf.open5gs.org:80) +# o SBI Client(https://127.0.0.10:443, https://[::1]:443) without verification +# sbi: +# client: +# no_verify: true +# key: /etc/open5gs/tls/amf.key +# cert: /etc/open5gs/tls/amf.crt +# nrf: # sbi: # - addr: 127.0.0.10 -# tls: -# key: nrf.key -# pem: nrf.pem +# - addr: ::1 +# +# o SBI Client(https://nrf.open5gs.org:443) +# Use the specified certificate while verifying the server +# +# sbi: +# client: +# cacert: /etc/open5gs/tls/ca.crt +# key: /etc/open5gs/tls/amf.key +# cert: /etc/open5gs/tls/amf.crt +# nrf: +# sbi: # - name: nrf.open5gs.org # # o SBI Client(http://[fd69:f21d:873c:fa::1]:80) @@ -386,6 +729,22 @@ # - 127.0.0.10 # - fd69:f21d:873c:fa::1 # +# o SBI Option (Default) +# - tcp_nodelay : true +# - so_linger.l_onoff : false +# +# sbi: +# client: +# no_tls: true +# nrf: +# sbi: +# addr: 127.0.0.10 +# option: +# tcp_nodelay: false +# so_linger: +# l_onoff: true +# l_linger: 10 +# nrf: sbi: - addr: @@ -393,12 +752,10 @@ port: 7777 # -# upf: -# # <PFCP Client>> # # o PFCP Client(127.0.0.7:8805) -# +# upf: # pfcp: # addr: 127.0.0.7 # @@ -449,76 +806,62 @@ - addr: 172.18.18.7 # -# parameter: -# -# o Number of output streams per SCTP associations. -# sctp_streams: 30 -# # o Disable use of IPv4 addresses (only IPv6) -# no_ipv4: true +# parameter: +# no_ipv4: true # # o Disable use of IPv6 addresses (only IPv4) -# no_ipv6: true +# parameter: +# no_ipv6: true # # o Prefer IPv4 instead of IPv6 for estabishing new GTP connections. -# prefer_ipv4: true +# parameter: +# prefer_ipv4: true # # o Disable selection of UPF PFCP in Round-Robin manner -# no_pfcp_rr_select: true +# parameter: +# no_pfcp_rr_select: true +# +# o Legacy support for pre-release LTE 11 devices +# - Omits adding local address in packet filters for compatibility +# parameter: +# no_ipv4v6_local_addr_in_packet_filter: true # parameter: # +# o Maximum Number of UE # max: +# ue: 1024 # -# o Maximum Number of UE per AMF/MME -# ue: 1024 -# o Maximum Number of gNB/eNB per AMF/MME -# gnb: 64 +# o Maximum Number of Peer(S1AP/NGAP, DIAMETER, GTP, PFCP or SBI) +# max: +# peer: 64 +# +# o Maximum Number of GTP peer nodes per SGWC/SMF +# max: +# gtp_peer: 64 # max: # -# pool: -# -# o The default memory pool size was set assuming 1024 UEs. -# To connect more UEs, you need to increase the size further. -# -# - Pool-size 128 => 65536 Number -# - Pool-size 256 => 16384 Number -# - Pool-size 512 => 4096 Number -# - Pool-size 1024 => 1024 Number -# - Pool-size 2048 => 512 Number -# - Pool-size 8192 => 128 Number -# - Pool-size 1024*1024 => 8 Number -# -# 128: 65536 -# 256: 16384 -# 512: 4096 -# 1024: 1024 -# 2048: 512 -# 8192: 128 -# big: 8 -# -pool: - -# -# time: -# # o NF Instance Heartbeat (Default : 0) # NFs will not send heart-beat timer in NFProfile # NRF will send heart-beat timer in NFProfile +# (Default values are used, so no configuration is required) # # o NF Instance Heartbeat (20 seconds) # NFs will send heart-beat timer (20 seconds) in NFProfile # NRF can change heart-beat timer in NFProfile -# +# time: # nf_instance: # heartbeat: 20 # # o Message Wait Duration (Default : 10,000 ms = 10 seconds) +# (Default values are used, so no configuration is required) # # o Message Wait Duration (3000 ms) +# time: # message: # duration: 3000 # @@ -526,8 +869,10 @@ # Time to wait for SMF to send # PFCP Session Modification Request(Remove Indirect Tunnel) to the UPF # after sending Nsmf_PDUSession_UpdateSMContext Response(hoState:COMPLETED) +# (Default values are used, so no configuration is required) # # o Handover Wait Duration (500ms) +# time: # handover: # duration: 500 time: diff --git a/ttcn3-pgw-test/open5gs-upf.yaml b/ttcn3-pgw-test/open5gs-upf.yaml index 10fe4d4..693a1d7 100644 --- a/ttcn3-pgw-test/open5gs-upf.yaml +++ b/ttcn3-pgw-test/open5gs-upf.yaml @@ -1,52 +1,65 @@ # -# logger: -# # o Set OGS_LOG_INFO to all domain level # - If `level` is omitted, the default level is OGS_LOG_INFO) # - If `domain` is omitted, the all domain level is set from 'level' -# (Nothing is needed) +# (Default values are used, so no configuration is required) # # o Set OGS_LOG_ERROR to all domain level # - `level` can be set with none, fatal, error, warn, info, debug, trace +# logger: # level: error # # o Set OGS_LOG_DEBUG to mme/emm domain level +# logger: # level: debug # domain: mme,emm # # o Set OGS_LOG_TRACE to all domain level +# logger: # level: trace -# domain: core,pfcp,gtp,upf,event,tlv,mem,sock +# domain: core,sbi,ausf,event,tlv,mem,sock # logger: level: info # -# upf: -# # <PFCP Server> # # o PFCP Server(127.0.0.7:8805, ::1:8805) +# upf: # pfcp: # - addr: 127.0.0.7 # - addr: ::1 # # o PFCP-U Server(127.0.0.1:2152, [::1]:2152) +# upf: # pfcp: # name: localhost # +# o PFCP Option (Default) +# - so_bindtodevice : NULL +# +# upf: +# pfcp: +# addr: 127.0.0.7 +# option: +# so_bindtodevice: vrf-blue +# # <GTP-U Server>> # # o GTP-U Server(127.0.0.7:2152, [::1]:2152) +# upf: # gtpu: # - addr: 127.0.0.7 # - addr: ::1 # # o GTP-U Server(127.0.0.1:2152, [::1]:2152) +# upf: # gtpu: # name: localhost # # o User Plane IP Resource information +# upf: # gtpu: # - addr: # - 127.0.0.7 @@ -62,24 +75,37 @@ # source_interface: 1 # # o Provide custom UPF GTP-U address to be advertised inside NGAP messages +# upf: # gtpu: # - addr: 10.4.128.21 # advertise: 172.24.15.30 # +# upf: # gtpu: # - addr: 10.4.128.21 # advertise: # - 127.0.0.1 # - ::1 # +# upf: # gtpu: # - addr: 10.4.128.21 # advertise: upf1.5gc.mnc001.mcc001.3gppnetwork.org # +# upf: # gtpu: # - dev: ens3 # advertise: upf1.5gc.mnc001.mcc001.3gppnetwork.org # +# o GTP-U Option (Default) +# - so_bindtodevice : NULL +# +# upf: +# gtpu: +# addr: 127.0.0.7 +# option: +# so_bindtodevice: vrf-blue +# # <Subnet for UE network> # # Note that you need to setup your UE network using TUN device. @@ -88,6 +114,7 @@ # o IPv4 Pool # $ sudo ip addr add 10.45.0.1/16 dev ogstun # +# upf: # subnet: # addr: 10.45.0.1/16 # @@ -95,6 +122,7 @@ # $ sudo ip addr add 10.45.0.1/16 dev ogstun # $ sudo ip addr add 2001:db8:cafe::1/48 dev ogstun # +# upf: # subnet: # - addr: 10.45.0.1/16 # - addr: 2001:db8:cafe::1/48 @@ -109,6 +137,7 @@ # # ; If the UE has unknown DNN/APN(not internet/ims), SMF/UPF will crash. # +# upf: # subnet: # - addr: 10.45.0.1/16 # dnn: internet @@ -122,6 +151,7 @@ # o Specific DNN/APN with the FALLBACK SUBNET(10.47.0.1/16) # ; Note that put the FALLBACK SUBNET last to avoid SMF/UPF crash. # +# upf: # subnet: # - addr: 10.45.0.1/16 # dnn: internet @@ -135,6 +165,7 @@ # $ sudo ip addr add 10.46.0.1/16 dev ogstun3 # $ sudo ip addr add 2001:db8:babe::1/48 dev ogstun3 # +# upf: # subnet: # - addr: 10.45.0.1/16 # dnn: internet @@ -148,6 +179,14 @@ # dnn: ims # dev: ogstun3 # +# <Metrics Server> +# +# o Metrics Server(http://<any address>:9090) +# upf: +# metrics: +# - addr: 0.0.0.0 +# port: 9090 +# upf: pfcp: - addr: 172.18.18.7 @@ -162,12 +201,10 @@ dev: ogstun46 # -# smf: -# # <PFCP Client>> # # o PFCP Client(127.0.0.4:8805) -# +# smf: # pfcp: # addr: 127.0.0.4 # @@ -176,62 +213,41 @@ addr: 172.18.18.4 # -# parameter: -# # o Number of output streams per SCTP associations. -# sctp_streams: 30 +# parameter: +# sctp_streams: 30 # # o Disable use of IPv4 addresses (only IPv6) -# no_ipv4: true +# parameter: +# no_ipv4: true # # o Disable use of IPv6 addresses (only IPv4) -# no_ipv6: true +# parameter: +# no_ipv6: true # # o Prefer IPv4 instead of IPv6 for estabishing new GTP connections. -# prefer_ipv4: true +# parameter: +# prefer_ipv4: true # parameter: # +# o Maximum Number of UE # max: +# ue: 1024 # -# o Maximum Number of UE per AMF/MME -# ue: 1024 -# o Maximum Number of gNB/eNB per AMF/MME -# gnb: 64 +# o Maximum Number of Peer(S1AP/NGAP, DIAMETER, GTP, PFCP or SBI) +# max: +# peer: 64 # max: # -# pool: -# -# o The default memory pool size was set assuming 1024 UEs. -# To connect more UEs, you need to increase the size further. -# -# - Pool-size 128 => 65536 Number -# - Pool-size 256 => 16384 Number -# - Pool-size 512 => 4096 Number -# - Pool-size 1024 => 1024 Number -# - Pool-size 2048 => 512 Number -# - Pool-size 8192 => 128 Number -# - Pool-size 1024*1024 => 8 Number -# -# 128: 65536 -# 256: 16384 -# 512: 4096 -# 1024: 1024 -# 2048: 512 -# 8192: 128 -# big: 8 -# -pool: - -# -# time: -# # o Message Wait Duration (Default : 10,000 ms = 10 seconds) +# (Default values are used, so no configuration is required) # # o Message Wait Duration (3000 ms) +# time: # message: # duration: 3000 time: -- To view, visit https://gerrit.osmocom.org/c/docker-playground/+/31422 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: docker-playground Gerrit-Branch: master Gerrit-Change-Id: I27adbab6a6b95ddf4c6d39803e4f7dd079f11a4c Gerrit-Change-Number: 31422 Gerrit-PatchSet: 2 Gerrit-Owner: fixeria &lt;vyanitskiy(a)sysmocom.de&gt; Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria &lt;vyanitskiy(a)sysmocom.de&gt; Gerrit-Reviewer: laforge &lt;laforge(a)osmocom.org&gt; Gerrit-Reviewer: osmith &lt;osmith(a)sysmocom.de&gt; Gerrit-Reviewer: pespin &lt;pespin(a)sysmocom.de&gt; Gerrit-MessageType: merged