8 Mar
2023
8 Mar
'23
1:57 p.m.
pespin has uploaded this change for review. (
https://gerrit.osmocom.org/c/osmo-bts/+/31749 )
Change subject: bts-trx: Fix no NM Radio{Carrier,Channel} not switching to Enabled if one
TRX is rf_locked
......................................................................
bts-trx: Fix no NM Radio{Carrier,Channel} not switching to Enabled if one TRX is
rf_locked
Differentiate in each TRX between being provisioned (configuration available) and being
provisioned *plus enabled*.
TRX0 waits for all other TRX to be ready before sending POWERON, since
all TRX need to have been minimally configured over TRXC before POWERON
is called. This "ready" state though, doesn't necessarily mean the
TRX!=0 are enabled (aka NM Enabled and rf_locked=0). With them being
configured it es enough to start the whole PHY.
With the old logic, given any TRX was rf_locked=1 at startup, the PHY
would not become UP because it the TRX_PROV FSM was waiting for OPSTART
to arrive on all TRX, which wouldn't happen on TRX that had rf_locked=1.
So in summary, the desired requirements to start the PHY are (in any
order):
1- Wait all TRX are configured
2- Wait for TRX0 OPSTART
Related: SYS#6370
Change-Id: Ie4836f5721ce8227a63c267730aeb17228994214
---
M src/osmo-bts-trx/trx_provision_fsm.c
1 file changed, 49 insertions(+), 17 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-bts refs/changes/49/31749/1
diff --git a/src/osmo-bts-trx/trx_provision_fsm.c b/src/osmo-bts-trx/trx_provision_fsm.c
index 5deecd7..8b20b10 100644
--- a/src/osmo-bts-trx/trx_provision_fsm.c
+++ b/src/osmo-bts-trx/trx_provision_fsm.c
@@ -253,11 +253,11 @@
l1h->config.setslot_sent[data->tn] = false;
}
-/* Whether a given TRX is fully configured and can be powered on */
+/* Whether a given TRX is fully configured */
static bool trx_is_provisioned(struct trx_l1h *l1h)
{
struct phy_instance *pinst = l1h->phy_inst;
- if (l1h->config.enabled && l1h->config.rxtune_acked &&
l1h->config.txtune_acked &&
+ if (l1h->config.rxtune_acked && l1h->config.txtune_acked &&
(l1h->config.bsic_acked || !pinst->phy_link->u.osmotrx.use_legacy_setbsic)
&&
(l1h->config.tsc_acked || pinst->phy_link->u.osmotrx.use_legacy_setbsic)
&&
(l1h->config.nomtxpower_acked || l1h->config.nominal_power_set_by_vty)
&&
@@ -267,6 +267,11 @@
return false;
}
+/* Whether a given TRX is fully configured and can be powered on */
+static bool trx_is_provisioned_and_enabled(struct trx_l1h *l1h)
+{
+ return l1h->config.enabled && trx_is_provisioned(l1h);
+}
static void trx_signal_ready_trx0(struct trx_l1h *l1h)
{
@@ -282,7 +287,7 @@
}
}
-/* Called from TRX0 to check if other TRX are already configured and powered so POWERON
can be sent */
+/* Called from TRX0 to check if other TRX are already configured so POWERON can be sent
*/
static bool trx_other_trx0_ready(struct trx_l1h *l1h)
{
struct phy_instance *pinst = l1h->phy_inst;
@@ -293,7 +298,7 @@
struct trx_l1h *l1h_it = pinst_it->u.osmotrx.hdl;
if (l1h_it->phy_inst->num == 0)
continue;
- if (l1h_it->provision_fi->state != TRX_PROV_ST_OPEN_POWERON)
+ if (!trx_is_provisioned(l1h_it))
return false;
}
return true;
@@ -389,7 +394,8 @@
uint16_t arfcn;
int nominal_power;
int status;
- bool others_ready;
+ bool waiting_other_trx;
+ bool was_ready = trx_is_provisioned(l1h);
switch (event) {
case TRX_PROV_EV_CLOSE:
@@ -485,22 +491,22 @@
l1if_provision_transceiver_trx(l1h);
- if (l1h->phy_inst->num == 0)
- others_ready = trx_other_trx0_ready(l1h);
- else
- others_ready = true; /* we don't care about others in TRX!=0 */
+ if (l1h->phy_inst->num == 0) {
+ waiting_other_trx = !trx_other_trx0_ready(l1h);
+ } else {
+ waiting_other_trx = false; /* we don't care about others in TRX!=0 */
+ /* If we just became ready for TRX0 POWERON (aka this TRX becomes provisioned), signal
it to TRX0: */
+ if (l1h->phy_inst->num != 0 && (!was_ready &&
trx_is_provisioned(l1h)))
+ trx_signal_ready_trx0(l1h);
+ }
/* if we gathered all data and could go forward. For TRX0, only after
* all other TRX are prepared, since it will send POWERON commad */
- if (trx_is_provisioned(l1h) &&
- (l1h->phy_inst->num != 0 || others_ready)) {
- if (l1h->phy_inst->num != 0) {
+ if (trx_is_provisioned_and_enabled(l1h) && !waiting_other_trx) {
+ if (l1h->phy_inst->num != 0)
trx_prov_fsm_state_chg(fi, TRX_PROV_ST_OPEN_POWERON);
- /* Once we are powered on, signal TRX0 in case it was waiting for us */
- trx_signal_ready_trx0(l1h);
- } else {
+ else
trx_prov_fsm_state_chg(fi, TRX_PROV_ST_OPEN_WAIT_POWERON_CNF);
- }
} else {
LOGPFSML(fi, LOGL_INFO, "Delay poweron, wait for:%s%s%s%s%s%s%s%s\n",
l1h->config.enabled ? "" :" enable",
@@ -512,7 +518,7 @@
l1h->config.txtune_acked ? "" : " txtune-ack",
l1h->config.nominal_power_set_by_vty ? "" :
(l1h->config.nomtxpower_acked ? "" : " nomtxpower-ack"),
l1h->config.setformat_acked ? "" : " setformat-ack",
- (l1h->phy_inst->num != 0 || others_ready) ? "" : "
other-trx"
+ waiting_other_trx ? "" : " other-trx"
);
}
}
--
To view, visit https://gerrit.osmocom.org/c/osmo-bts/+/31749
To unsubscribe, or for help writing mail filters, visit
https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-bts
Gerrit-Branch: master
Gerrit-Change-Id: Ie4836f5721ce8227a63c267730aeb17228994214
Gerrit-Change-Number: 31749
Gerrit-PatchSet: 1
Gerrit-Owner: pespin <pespin(a)sysmocom.de>
Gerrit-MessageType: newchange