[M] Change in osmo-hnbgw[master]: rua: validate correct RUA ctx state per RUA message type

laforge has submitted this change. ( https://gerrit.osmocom.org/c/osmo-hnbgw/+/35329?usp=email ) Change subject: rua: validate correct RUA ctx state per RUA message type ...................................................................... rua: validate correct RUA ctx state per RUA message type It helps in a pretty complex situation seen in the field. A third-party MSC releases SCCP in one fell swoop, not waiting for the Iu Release Complete to come back from RAN as the specs would suggest. The result is this odd sequence, where late rx of RUA Disconnect actually causes a new SCCP connection to be established and torn down again: RAN HNBGW MSC |--active-RUA-ctx----|--active-sccp------| | |<--IU-Release-Cmd--| |<--IU-Release-Cmd---| | | |<--SCCP-RLSD-------| (too soon) |...<-RUA-Disconnect-| x (the consequence) | x |--RUA-Disconnect--->| (IU Release Complete) x <create-new-ctx> |-SCCP-CR---------->| |-IU-Release-Compl->| |<--CREF------------| x x This patch is a relatively simple practical improvement of above situation that is logically obvious: Validate the correct message type for creating a new RUA-to-SCCP context: RUA Connect. That means the IU Release Complete is ignored: RAN HNBGW MSC |--active-RUA-ctx----|--active-sccp------| | |<--IU-Release-Cmd--| |<--IU-Release-Cmd---| | | |<--SCCP-RLSD-------| (too soon) |...<-RUA-Disconnect-| x (the consequence) | x |--RUA-Disconnect--->| (IU Release Complete) x <error> x Related: SYS#6602 Change-Id: Ie359fcada98fb19f56015cf462e6d8c039f5fce5 --- M src/osmo-hnbgw/hnbgw_rua.c 1 file changed, 82 insertions(+), 14 deletions(-) Approvals: fixeria: Looks good to me, but someone else must approve laforge: Looks good to me, approved pespin: Looks good to me, but someone else must approve daniel: Looks good to me, but someone else must approve Jenkins Builder: Verified diff --git a/src/osmo-hnbgw/hnbgw_rua.c b/src/osmo-hnbgw/hnbgw_rua.c index 073f3ce..84bd817 100644 --- a/src/osmo-hnbgw/hnbgw_rua.c +++ b/src/osmo-hnbgw/hnbgw_rua.c @@ -179,18 +179,12 @@ return get_value_string(rua_procedure_code_names, val); } -static struct hnbgw_context_map *find_or_create_context_map(struct hnb_context *hnb, uint32_t rua_ctx_id, bool is_ps, - struct msgb *ranap_msg) +static struct hnbgw_context_map *create_context_map(struct hnb_context *hnb, uint32_t rua_ctx_id, bool is_ps, + struct msgb *ranap_msg) { struct hnbgw_context_map *map; struct hnbgw_cnlink *cnlink; - map = context_map_find_by_rua_ctx_id(hnb, rua_ctx_id, is_ps); - if (map) { - /* Already established SCCP link. Continue to use that. */ - return map; - } - /* Establish a new context map. From the RUA Connect, extract a mobile identity, if any, and select a CN link * based on an NRI found in the mobile identity, if any. */ @@ -255,12 +249,35 @@ memcpy(ranap_msg->l2h, data, len); } - map = find_or_create_context_map(hnb, context_id, is_ps, ranap_msg); - if (!map) { - LOGHNB(hnb, DRUA, LOGL_ERROR, - "Failed to create context map for %s: rx RUA %s with %u bytes RANAP data\n", - is_ps ? "IuPS" : "IuCS", rua_procedure_code_name(rua_procedure), data ? len : 0); - return -1; + map = context_map_find_by_rua_ctx_id(hnb, context_id, is_ps); + + switch (rua_procedure) { + case RUA_ProcedureCode_id_Connect: + /* A Connect message can only be the first message for an unused RUA context */ + if (map) { + /* Already established this RUA context. But then how can it be a Connect message. */ + LOGHNB(hnb, DRUA, LOGL_ERROR, "rx RUA %s for already active RUA context %u\n", + rua_procedure_code_name(rua_procedure), context_id); + return -EINVAL; + } + /* ok, this RUA context does not exist yet, so create one. */ + map = create_context_map(hnb, context_id, is_ps, ranap_msg); + if (!map) { + LOGHNB(hnb, DRUA, LOGL_ERROR, + "Failed to create context map for %s: rx RUA %s with %u bytes RANAP data\n", + is_ps ? "IuPS" : "IuCS", rua_procedure_code_name(rua_procedure), data ? len : 0); + return -EINVAL; + } + break; + + default: + /* Any message other than Connect must have a valid RUA context */ + if (!map) { + LOGHNB(hnb, DRUA, LOGL_ERROR, "rx RUA %s for unknown RUA context %u\n", + rua_procedure_code_name(rua_procedure), context_id); + return -EINVAL; + } + break; } LOG_MAP(map, DRUA, LOGL_DEBUG, "rx RUA %s with %u bytes RANAP data\n", -- To view, visit https://gerrit.osmocom.org/c/osmo-hnbgw/+/35329?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-hnbgw Gerrit-Branch: master Gerrit-Change-Id: Ie359fcada98fb19f56015cf462e6d8c039f5fce5 Gerrit-Change-Number: 35329 Gerrit-PatchSet: 2 Gerrit-Owner: neels &lt;nhofmeyr(a)sysmocom.de&gt; Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: daniel &lt;dwillmann(a)sysmocom.de&gt; Gerrit-Reviewer: fixeria &lt;vyanitskiy(a)sysmocom.de&gt; Gerrit-Reviewer: laforge &lt;laforge(a)osmocom.org&gt; Gerrit-Reviewer: pespin &lt;pespin(a)sysmocom.de&gt; Gerrit-MessageType: merged