nickvsnetworking has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-e1-hardware/+/27014 )
Change subject: Doc Update - Build process for DAHDI on Debian 11 ......................................................................
Doc Update - Build process for DAHDI on Debian 11
Change-Id: I0679bd14702b7b3d05c3346ce10358f45fef0301 --- M doc/manuals/chapters/host-software.adoc 1 file changed, 23 insertions(+), 0 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-e1-hardware refs/changes/14/27014/1
diff --git a/doc/manuals/chapters/host-software.adoc b/doc/manuals/chapters/host-software.adoc index 4c8578e..28ce7b9 100644 --- a/doc/manuals/chapters/host-software.adoc +++ b/doc/manuals/chapters/host-software.adoc @@ -44,6 +44,29 @@ When using that DAHDI Linux kernel driver, there is no need for osmo-e1d. The USB interface is directly managed inside the kernel.
+ +==== Installing DAHDI driver +Example installation steps, tested on Debian 11, for installing DAHDI Linux & DAHDI Tools. +Note: Plugging in the device prior to installing may lead to issues. + +---- +$ sudo apt-get install -y linux-headers-`uname -r` git dfu-util make gcc autoconf libtool +$ git clone https://git.osmocom.org/dahdi-linux/ +$ git clone https://github.com/asterisk/dahdi-tools +$ cd dahdi-linux +$ sudo make install +$ cd ../dahdi-tools +$ sudo autoreconf -i +$ ./configure +$ sudo make install +$ sudo make install-config +$ sudo modprobe icE1usb +$ sudo /etc/init.d/dahdi start +---- + +At this point you can plug in the icE1usb, and scan for it with `sudo dahdi_scan` which should list the two E1 ports on the iCE1usb. + + === Other software
you can interface 3rd party applications with osmo-e1d in the following