[XS] Change in upf-benchmark[master]: testsuites: tunend: upf: Fix wrong format of some ip neigh commands

pespin has uploaded this change for review. ( https://gerrit.osmocom.org/c/upf-benchmark/+/39900?usp=email ) Change subject: testsuites: tunend: upf: Fix wrong format of some ip neigh commands ...................................................................... testsuites: tunend: upf: Fix wrong format of some ip neigh commands The ip-neigh+printf commands were taken from an older gtplab-sysmo2017 which was printing stuff as ".1%02u", but in the gtplab-sysmo2025 testsuite where they were put they were used to print ".%02u". As a result, the following IP addresses where printed: 172.16.32.01 .. 172.16.32.07 172.16.32.08 172.16.32.09 172.16.32.10 It turns out that commands such as ip neigh actually read integers between dots as octal if they start with a leading 0. As a result, addresses .01-.07 were working fine, since those octal values match the decimal ones. However, .08 and .08 failed to be set due to not being octal numbers. As a result, when running eupf tunend ul+dl tests, DL traffic encapsulated back aimed at RAN iface was, for some unknown reason, sent over CN iface instead because it couldn't find an ARP resolution for it, creating misbehaviors when running that testcase. Change-Id: I1cdc9559aa8243c062d022f97a20ad8f8d3ad55b --- M testsuites/gtplab-sysmo2025/tunend/upf/eupf/configure.sh M testsuites/gtplab-sysmo2025/tunend/upf/osmo-upf/configure.sh 2 files changed, 4 insertions(+), 4 deletions(-) git pull ssh://gerrit.osmocom.org:29418/upf-benchmark refs/changes/00/39900/1 diff --git a/testsuites/gtplab-sysmo2025/tunend/upf/eupf/configure.sh b/testsuites/gtplab-sysmo2025/tunend/upf/eupf/configure.sh index eede062..a949e2d 100755 --- a/testsuites/gtplab-sysmo2025/tunend/upf/eupf/configure.sh +++ b/testsuites/gtplab-sysmo2025/tunend/upf/eupf/configure.sh @@ -66,8 +66,8 @@ # TRex doesn't answer ARPs, so we need to set up the peers: for i in $(seq "2" "$((NUM_ENB + 1))"); do # Delete needed to potentially drop incomplet entries created when trying to Tx traffic: - sudo ip neigh del "$(printf "172.16.32.%02u" "$i")" lladdr $MAC_RAN_PEER nud permanent dev $IFACE_RAN || true - sudo ip neigh add "$(printf "172.16.32.%02u" "$i")" lladdr $MAC_RAN_PEER nud permanent dev $IFACE_RAN || true + sudo ip neigh del "$(printf "172.16.32.%u" "$i")" lladdr $MAC_RAN_PEER nud permanent dev $IFACE_RAN || true + sudo ip neigh add "$(printf "172.16.32.%u" "$i")" lladdr $MAC_RAN_PEER nud permanent dev $IFACE_RAN || true done sudo ip neigh del 172.16.31.200 lladdr $MAC_CN_PEER nud permanent dev $IFACE_CN || true sudo ip neigh add 172.16.31.200 lladdr $MAC_CN_PEER nud permanent dev $IFACE_CN || true diff --git a/testsuites/gtplab-sysmo2025/tunend/upf/osmo-upf/configure.sh b/testsuites/gtplab-sysmo2025/tunend/upf/osmo-upf/configure.sh index b574738..f41e98a 100755 --- a/testsuites/gtplab-sysmo2025/tunend/upf/osmo-upf/configure.sh +++ b/testsuites/gtplab-sysmo2025/tunend/upf/osmo-upf/configure.sh @@ -67,8 +67,8 @@ # TRex doesn't answer ARPs, so we need to set up the peers: for i in $(seq "2" "$((NUM_ENB + 1))"); do # Delete needed to potentially drop incomplet entries created when trying to Tx traffic: - sudo ip neigh del "$(printf "172.16.32.%02u" "$i")" lladdr $MAC_RAN_PEER nud permanent dev $IFACE_RAN || true - sudo ip neigh add "$(printf "172.16.32.%02u" "$i")" lladdr $MAC_RAN_PEER nud permanent dev $IFACE_RAN || true + sudo ip neigh del "$(printf "172.16.32.%u" "$i")" lladdr $MAC_RAN_PEER nud permanent dev $IFACE_RAN || true + sudo ip neigh add "$(printf "172.16.32.%u" "$i")" lladdr $MAC_RAN_PEER nud permanent dev $IFACE_RAN || true done sudo ip neigh del 172.16.31.200 lladdr $MAC_CN_PEER nud permanent dev $IFACE_CN || true sudo ip neigh add 172.16.31.200 lladdr $MAC_CN_PEER nud permanent dev $IFACE_CN || true -- To view, visit https://gerrit.osmocom.org/c/upf-benchmark/+/39900?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings?usp=email Gerrit-MessageType: newchange Gerrit-Project: upf-benchmark Gerrit-Branch: master Gerrit-Change-Id: I1cdc9559aa8243c062d022f97a20ad8f8d3ad55b Gerrit-Change-Number: 39900 Gerrit-PatchSet: 1 Gerrit-Owner: pespin <pespin(a)sysmocom.de>