[L] Change in docker-playground[master]: Introduce ttcn3-asterisk-ims-ue-test

pespin has submitted this change. ( https://gerrit.osmocom.org/c/docker-playground/+/36492?usp=email ) ( 1 is the latest approved patch-set. No files were changed between the latest approved patch-set and the submitted one. )Change subject: Introduce ttcn3-asterisk-ims-ue-test ...................................................................... Introduce ttcn3-asterisk-ims-ue-test This dockerized setup allows running the Asterisk_Tests ttcn3 testsuite against Asterisk from the asterisk-master docker image, in order to test the IMS UE feature which will be developed soon. Related: SYS#6782 Depends: osmo-ttcn3-hacks.git Change-Id I66f776d5df6fb5dc488d9e589b84a6b2385406e8 Change-Id: Idd262b9224ea879a6e941792944fe0b0db3e68ba --- A ttcn3-asterisk-ims-ue-test/Asterisk_Tests.cfg A ttcn3-asterisk-ims-ue-test/Dockerfile A ttcn3-asterisk-ims-ue-test/Makefile A ttcn3-asterisk-ims-ue-test/asterisk/asterisk.conf A ttcn3-asterisk-ims-ue-test/asterisk/asterisk.sh A ttcn3-asterisk-ims-ue-test/asterisk/extensions.conf A ttcn3-asterisk-ims-ue-test/asterisk/pjsip.conf A ttcn3-asterisk-ims-ue-test/jenkins.sh 8 files changed, 361 insertions(+), 0 deletions(-) Approvals: fixeria: Looks good to me, approved Jenkins Builder: Verified laforge: Looks good to me, but someone else must approve diff --git a/ttcn3-asterisk-ims-ue-test/Asterisk_Tests.cfg b/ttcn3-asterisk-ims-ue-test/Asterisk_Tests.cfg new file mode 100644 index 0000000..c8744bb --- /dev/null +++ b/ttcn3-asterisk-ims-ue-test/Asterisk_Tests.cfg @@ -0,0 +1,22 @@ +[ORDERED_INCLUDE] +"/osmo-ttcn3-hacks/Common.cfg" +"/osmo-ttcn3-hacks/asterisk/Asterisk_Tests.default" + +[LOGGING] + +[TESTPORT_PARAMETERS] +*.SIP.default_local_address := "172.18.11.103" +*.SIP.local_sip_port := "5060" +*.SIP.default_dest_address := "172.18.11.10" +*.SIP.default_dest_port := "5094" + +[MODULE_PARAMETERS] +Asterisk_Tests.mp_local_sip_host := "172.18.11.103" +Asterisk_Tests.mp_remote_sip_host := "172.18.11.10" +Asterisk_Tests.mp_local_sip_port := 5060 +Asterisk_Tests.mp_remote_sip_port := 5094 + +[MAIN_CONTROLLER] + +[EXECUTE] +Asterisk_Tests.control diff --git a/ttcn3-asterisk-ims-ue-test/Dockerfile b/ttcn3-asterisk-ims-ue-test/Dockerfile new file mode 100644 index 0000000..1a2f8aa --- /dev/null +++ b/ttcn3-asterisk-ims-ue-test/Dockerfile @@ -0,0 +1,13 @@ +ARG REGISTRY +ARG USER +FROM $REGISTRY/$USER/debian-bookworm-titan +ARG OSMO_TTCN3_BRANCH="master" + +ADD https://gerrit.osmocom.org/plugins/gitiles/osmo-ttcn3-hacks/+/$OSMO_TTCN3_B… /tmp/commit +RUN ttcn3-docker-prepare "$OSMO_TTCN3_BRANCH" asterisk + +VOLUME /data + +COPY Asterisk_Tests.cfg /data/Asterisk_Tests.cfg + +CMD ttcn3-docker-run asterisk Asterisk_Tests diff --git a/ttcn3-asterisk-ims-ue-test/Makefile b/ttcn3-asterisk-ims-ue-test/Makefile new file mode 100644 index 0000000..8d0e10b --- /dev/null +++ b/ttcn3-asterisk-ims-ue-test/Makefile @@ -0,0 +1 @@ +include ../make/Makefile diff --git a/ttcn3-asterisk-ims-ue-test/asterisk/asterisk.conf b/ttcn3-asterisk-ims-ue-test/asterisk/asterisk.conf new file mode 100644 index 0000000..a17d606 --- /dev/null +++ b/ttcn3-asterisk-ims-ue-test/asterisk/asterisk.conf @@ -0,0 +1,142 @@ +[directories](!) +astcachedir => /var/cache/asterisk +astetcdir => /etc/asterisk +astmoddir => /usr/lib/asterisk/modules +astvarlibdir => /var/lib/asterisk +astdbdir => /var/lib/asterisk +astkeydir => /var/lib/asterisk +astdatadir => /var/lib/asterisk +astagidir => /var/lib/asterisk/agi-bin +astspooldir => /var/spool/asterisk +astrundir => /var/run/asterisk +astlogdir => /data +astsbindir => /usr/sbin + +[options] +;verbose = 3 +;debug = 3 +;trace = 0 ; Set the trace level. +;refdebug = yes ; Enable reference count debug logging. +;alwaysfork = yes ; Same as -F at startup. +;nofork = yes ; Same as -f at startup. +;quiet = yes ; Same as -q at startup. +;timestamp = yes ; Same as -T at startup. +;execincludes = yes ; Support #exec in config files. +;console = yes ; Run as console (same as -c at startup). +;highpriority = yes ; Run realtime priority (same as -p at + ; startup). +;initcrypto = yes ; Initialize crypto keys (same as -i at + ; startup). +;nocolor = yes ; Disable console colors. +;dontwarn = yes ; Disable some warnings. +;dumpcore = yes ; Dump core on crash (same as -g at startup). +;languageprefix = yes ; Use the new sound prefix path syntax. +;systemname = my_system_name ; Prefix uniqueid with a system name for + ; Global uniqueness issues. +;autosystemname = yes ; Automatically set systemname to hostname, + ; uses 'localhost' on failure, or systemname if + ; set. +;mindtmfduration = 80 ; Set minimum DTMF duration in ms (default 80 ms) + ; If we get shorter DTMF messages, these will be + ; changed to the minimum duration +;maxcalls = 10 ; Maximum amount of calls allowed. +;maxload = 0.9 ; Asterisk stops accepting new calls if the + ; load average exceed this limit. +;maxfiles = 1000 ; Maximum amount of openfiles. +;minmemfree = 1 ; In MBs, Asterisk stops accepting new calls if + ; the amount of free memory falls below this + ; watermark. +;cache_media_frames = yes ; Cache media frames for performance + ; Disable this option to help track down media frame + ; mismanagement when using valgrind or MALLOC_DEBUG. + ; The cache gets in the way of determining if the + ; frame is used after being freed and who freed it. + ; NOTE: This option has no effect when Asterisk is + ; compiled with the LOW_MEMORY compile time option + ; enabled because the cache code does not exist. + ; Default yes +;cache_record_files = yes ; Cache recorded sound files to another + ; directory during recording. +;record_cache_dir = /tmp ; Specify cache directory (used in conjunction + ; with cache_record_files). +;transmit_silence = yes ; Transmit silence while a channel is in a + ; waiting state, a recording only state, or + ; when DTMF is being generated. Note that the + ; silence internally is generated in raw signed + ; linear format. This means that it must be + ; transcoded into the native format of the + ; channel before it can be sent to the device. + ; It is for this reason that this is optional, + ; as it may result in requiring a temporary + ; codec translation path for a channel that may + ; not otherwise require one. +;transcode_via_sln = yes ; Build transcode paths via SLINEAR, instead of + ; directly. +;runuser = asterisk ; The user to run as. +;rungroup = asterisk ; The group to run as. +;lightbackground = yes ; If your terminal is set for a light-colored + ; background. +;forceblackbackground = yes ; Force the background of the terminal to be + ; black, in order for terminal colors to show + ; up properly. +;defaultlanguage = en ; Default language +documentation_language = en_US ; Set the language you want documentation + ; displayed in. Value is in the same format as + ; locale names. +;hideconnect = yes ; Hide messages displayed when a remote console + ; connects and disconnects. +;lockconfdir = no ; Protect the directory containing the + ; configuration files (/etc/asterisk) with a + ; lock. +;stdexten = gosub ; How to invoke the extensions.conf stdexten. + ; macro - Invoke the stdexten using a macro as + ; done by legacy Asterisk versions. + ; gosub - Invoke the stdexten using a gosub as + ; documented in extensions.conf.sample. + ; Default gosub. +;live_dangerously = no ; Enable the execution of 'dangerous' dialplan + ; functions and configuration file access from + ; external sources (AMI, etc.) These functions + ; (such as SHELL) are considered dangerous + ; because they can allow privilege escalation. + ; Configuration files are considered dangerous + ; if they exist outside of the Asterisk + ; configuration directory. + ; Default no +;entityid=00:11:22:33:44:55 ; Entity ID. + ; This is in the form of a MAC address. + ; It should be universally unique. + ; It must be unique between servers communicating + ; with a protocol that uses this value. + ; This is currently is used by DUNDi and + ; Exchanging Device and Mailbox State + ; using protocols: XMPP, Corosync and PJSIP. +;rtp_use_dynamic = yes ; When set to "yes" RTP dynamic payload types + ; are assigned dynamically per RTP instance vs. + ; allowing Asterisk to globally initialize them + ; to pre-designated numbers (defaults to "yes"). +;rtp_pt_dynamic = 35 ; Normally the Dynamic RTP Payload Type numbers + ; are 96-127, which allow just 32 formats. The + ; starting point 35 enables the range 35-63 and + ; allows 29 additional formats. When you use + ; more than 32 formats in the dynamic range and + ; calls are not accepted by a remote + ; implementation, please report this and go + ; back to value 96. +;hide_messaging_ami_events = no; This option, if enabled, will + ; suppress all of the Message/ast_msg_queue channel's + ; housekeeping AMI and ARI channel events. This can + ; reduce the load on the manager and ARI applications + ; when the Digium Phone Module for Asterisk is in use. +;sounds_search_custom_dir = no; This option, if enabled, will + ; cause Asterisk to search for sounds files in + ; AST_DATA_DIR/sounds/custom before searching the + ; normal directories like AST_DATA_DIR/sounds/<lang>. + +; Changing the following lines may compromise your security. +;[files] +;astctlpermissions = 0660 +;astctlowner = root +;astctlgroup = apache +;astctl = asterisk.ctl + diff --git a/ttcn3-asterisk-ims-ue-test/asterisk/asterisk.sh b/ttcn3-asterisk-ims-ue-test/asterisk/asterisk.sh new file mode 100755 index 0000000..24a20db --- /dev/null +++ b/ttcn3-asterisk-ims-ue-test/asterisk/asterisk.sh @@ -0,0 +1,16 @@ +#!/bin/bash +set +e +set -x + +ASTERISK_CFG_PATH="/etc/asterisk" + +#rm -rf "${ASTERISK_CFG_PATH}" +#mkdir -p "${ASTERISK_CFG_PATH}" + +#cp -r /etc/asterisk/* "${ASTERISK_CFG_PATH}/" +cp /data/asterisk.conf "${ASTERISK_CFG_PATH}/" +#sed -i "s#/etc/asterisk#${ASTERISK_CFG_PATH}#" "${ASTERISK_CFG_PATH}/asterisk.conf" +cp /data/pjsip.conf "${ASTERISK_CFG_PATH}/" +cat /data/extensions.conf >>"${ASTERISK_CFG_PATH}/extensions.conf" + +/usr/sbin/asterisk -C "${ASTERISK_CFG_PATH}/asterisk.conf" -f -g -vvvvv -ddddd diff --git a/ttcn3-asterisk-ims-ue-test/asterisk/extensions.conf b/ttcn3-asterisk-ims-ue-test/asterisk/extensions.conf new file mode 100644 index 0000000..3c78a2d --- /dev/null +++ b/ttcn3-asterisk-ims-ue-test/asterisk/extensions.conf @@ -0,0 +1,37 @@ +[get-valid-endpoints] + +exten => s,1,Verbose(5, Entering get-valid-endpoints gosub.) + ; usage: no arguments, returns DIALGROUP object of registered and valid 050x endpoints + same => n,Set(ENDPOINT_1_STATE=${DEVICE_STATE(PJSIP/0501)}) + same => n,Set(ENDPOINT_2_STATE=${DEVICE_STATE(PJSIP/0502)}) + same => n,Set(ENDPOINT_3_STATE=${DEVICE_STATE(PJSIP/0503)}) + same => n,Set(ENDPOINT_4_STATE=${DEVICE_STATE(PJSIP/0504)}) + same => n,Set(ENDPOINT_1_EXPR=$[$["${ENDPOINT_1_STATE}" = "UNAVAILABLE"] | $["${ENDPOINT_1_STATE}" = "UNKNOWN"] | $["${ENDPOINT_1_STATE}" = "INVALID"]]) + same => n,Set(ENDPOINT_2_EXPR=$[$["${ENDPOINT_2_STATE}" = "UNAVAILABLE"] | $["${ENDPOINT_2_STATE}" = "UNKNOWN"] | $["${ENDPOINT_2_STATE}" = "INVALID"]]) + same => n,Set(ENDPOINT_3_EXPR=$[$["${ENDPOINT_3_STATE}" = "UNAVAILABLE"] | $["${ENDPOINT_3_STATE}" = "UNKNOWN"] | $["${ENDPOINT_3_STATE}" = "INVALID"]]) + same => n,Set(ENDPOINT_4_EXPR=$[$["${ENDPOINT_4_STATE}" = "UNAVAILABLE"] | $["${ENDPOINT_4_STATE}" = "UNKNOWN"] | $["${ENDPOINT_4_STATE}" = "INVALID"]]) + same => n,Set(DIALGROUP(CALL_VALID_LIST)=) ; clear list + same => n,ExecIf($[${ENDPOINT_1_EXPR} = 0]?Set(DIALGROUP(CALL_VALID_LIST,add)=PJSIP/0501)) + same => n,ExecIf($[${ENDPOINT_2_EXPR} = 0]?Set(DIALGROUP(CALL_VALID_LIST,add)=PJSIP/0502)) + same => n,ExecIf($[${ENDPOINT_3_EXPR} = 0]?Set(DIALGROUP(CALL_VALID_LIST,add)=PJSIP/0503)) + same => n,ExecIf($[${ENDPOINT_4_EXPR} = 0]?Set(DIALGROUP(CALL_VALID_LIST,add)=PJSIP/0504)) + same => n,Return(${DIALGROUP(CALL_VALID_LIST)}) + +[from-phone] + +exten => 0500,1,Verbose(5,${EXTEN}: Call all registered pjsips from ${CALLERID(num)}) + same => n,Gosub(get-valid-endpoints,s,1()) + same => n,Set(DIALGROUP(CALL_EVERYONE_LIST)=${GOSUB_RETVAL}) + same => n,Set(DIALGROUP(CALL_EVERYONE_LIST,del)=PJSIP/${CALLERID(num)}) ; remove the caller + same => n,Dial(${DIALGROUP(CALL_EVERYONE_LIST)}) + same => n,Hangup(16) + +exten => _050X,1,Verbose(5,${EXTEN}: Call pjsip endpoint from ${CALLERID(num)}) + same => n,Dial(PJSIP/${EXTEN}) + same => n,Hangup(16) + +exten => _X,1,Verbose(5,${EXTEN}: Call external number from ${CALLERID(num)}) + same => n,Dial(PJSIP/${EXTEN}@973171) + same => n,Hangup(16) + + diff --git a/ttcn3-asterisk-ims-ue-test/asterisk/pjsip.conf b/ttcn3-asterisk-ims-ue-test/asterisk/pjsip.conf new file mode 100644 index 0000000..39cf9bb --- /dev/null +++ b/ttcn3-asterisk-ims-ue-test/asterisk/pjsip.conf @@ -0,0 +1,71 @@ + +[transport-udp] +type=transport +protocol=udp +bind=172.18.11.10:5094 +local_net=172.18.11.0/24 +;external_media_address=[obfuscated] +;external_signaling_address=[obfuscated] + + +[endpoint_phone_template] +type=endpoint +transport=transport-udp +context=from-phone +disallow=all +allow=alaw +allow=ulaw + +[auth_phone_template] +type=auth +auth_type=userpass + +[aor_phone_template] +type=aor +max_contacts=1 +remove_existing=yes + +[0501](endpoint_phone_template) +auth=0501 +aors=0501 +callerid=0501 + +[0501](auth_phone_template) +username=0501 +password=secret + +[0501](aor_phone_template) + +[0502](endpoint_phone_template) +auth=0502 +aors=0502 +callerid=0502 + +[0502](auth_phone_template) +username=0502 +password=secret + +[0502](aor_phone_template) + +[0503](endpoint_phone_template) +auth=0503 +aors=0503 +callerid=0503 + +[0503](auth_phone_template) +username=0503 +password=secret + +[0503](aor_phone_template) + +[0504](endpoint_phone_template) +auth=0504 +aors=0504 +callerid=0504 + +[0504](auth_phone_template) +username=0504 +password=secret + +[0504](aor_phone_template) + diff --git a/ttcn3-asterisk-ims-ue-test/jenkins.sh b/ttcn3-asterisk-ims-ue-test/jenkins.sh new file mode 100755 index 0000000..7e5361d --- /dev/null +++ b/ttcn3-asterisk-ims-ue-test/jenkins.sh @@ -0,0 +1,44 @@ +#!/bin/sh + +. ../jenkins-common.sh +IMAGE_SUFFIX="${IMAGE_SUFFIX:-master}" +docker_images_require \ + "asterisk-$IMAGE_SUFFIX" \ + "ttcn3-asterisk-ims-ue-test" + +set_clean_up_trap +set -e + +mkdir $VOL_BASE_DIR/asterisk-ims-ue-tester +mkdir $VOL_BASE_DIR/asterisk-ims-ue-tester/unix +cp Asterisk_Tests.cfg $VOL_BASE_DIR/asterisk-ims-ue-tester/ +write_mp_osmo_repo "$VOL_BASE_DIR/asterisk-ims-ue-tester/Asterisk_Tests.cfg" + +mkdir $VOL_BASE_DIR/asterisk +cp asterisk/* $VOL_BASE_DIR/asterisk/ + +network_create +network_replace_subnet_in_configs + +echo Starting container with Asterisk +docker run --rm \ + $(docker_network_params $SUBNET 10) \ + --ulimit core=-1 \ + -v $VOL_BASE_DIR/asterisk:/data \ + --name ${BUILD_TAG}-asterisk -d \ + $DOCKER_ARGS \ + $REPO_USER/asterisk-$IMAGE_SUFFIX \ + /bin/sh -c "/data/asterisk.sh >/data/asterisk.console.log 2>&1" + +# Leave some time for asterisk to start: +sleep 3 + +echo Starting container with Asterisk testsuite +docker run --rm \ + $(docker_network_params $SUBNET 103) \ + --ulimit core=-1 \ + -e "TTCN3_PCAP_PATH=/data" \ + -v $VOL_BASE_DIR/asterisk-ims-ue-tester:/data \ + --name ${BUILD_TAG}-ttcn3-asterisk-ims-ue-test \ + $DOCKER_ARGS \ + $REPO_USER/ttcn3-asterisk-ims-ue-test -- To view, visit https://gerrit.osmocom.org/c/docker-playground/+/36492?usp=email To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: docker-playground Gerrit-Branch: master Gerrit-Change-Id: Idd262b9224ea879a6e941792944fe0b0db3e68ba Gerrit-Change-Number: 36492 Gerrit-PatchSet: 2 Gerrit-Owner: pespin &lt;pespin(a)sysmocom.de&gt; Gerrit-Reviewer: Jenkins Builder Gerrit-Reviewer: fixeria &lt;vyanitskiy(a)sysmocom.de&gt; Gerrit-Reviewer: laforge &lt;laforge(a)osmocom.org&gt; Gerrit-Reviewer: pespin &lt;pespin(a)sysmocom.de&gt; Gerrit-MessageType: merged