1 Aug
2024
1 Aug
'24
5:29 p.m.
pespin has uploaded this change for review. (
https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/37688?usp=email )
Change subject: ggsn: Split test and relax expectations testing gtpu access over ipv6
ll-addr
......................................................................
ggsn: Split test and relax expectations testing gtpu access over ipv6 ll-addr
Testing gtpu traffic to some potentially external IP address using the
link-local address has no clear usecase and it also depends on the
network setup and the implementation of the GGSN.
Hence, remove it from the regular test and move it to another test which
has a relaxed validation accepting different resolutions.
This allows knowing/testing the code path in the GGSN, while accepting
different outcomes.
Related: OS#6382
Change-Id: Icfae181ba1bb0dfb8a1a15dfe3a1d542ce69d88a
---
M ggsn_tests/GGSN_Tests.ttcn
1 file changed, 74 insertions(+), 9 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-ttcn3-hacks refs/changes/88/37688/1
diff --git a/ggsn_tests/GGSN_Tests.ttcn b/ggsn_tests/GGSN_Tests.ttcn
index 3f373aa..70bb1c3 100644
--- a/ggsn_tests/GGSN_Tests.ttcn
+++ b/ggsn_tests/GGSN_Tests.ttcn
@@ -1073,15 +1073,6 @@
var OCT16 dns1_addr := f_PCO_extract_proto(ctx.pco_neg, '0003'O);
- /* Check if we can use valid link-local src addr. */
- var OCT16 saddr_ll :=
f_ipv6_link_local(ctx.eua.endUserAddress.endUserAddressIPv6.ipv6_address);
- f_send_gtpu(ctx, f_gen_icmpv6_echo(saddr_ll, dns1_addr));
- if (m_ggsn_impl == GGSN_IMPL_OSMOCOM) {
- f_wait_icmp6_echo_reply(ctx);
- } else {
- f_wait_gtpu_fail(ctx);
- }
-
/* Check if we can use valid global src addr, should work */
var OCT16 saddr_glob :=
f_ipv6_global(ctx.eua.endUserAddress.endUserAddressIPv6.ipv6_address);
f_send_gtpu(ctx, f_gen_icmpv6_echo(saddr_glob, dns1_addr));
@@ -1091,6 +1082,61 @@
f_shutdown_helper();
}
+ /* Same as TC_pdp6_act_deact_gtpu_access, but using the ll addr as src address.
+ * The ability to reach the DNS IP using this ll-addr is not really
+ * well-specified, and it really depends on the network/routing setup,
+ * the address of the DNS server, etc.
+ * osmo-ggsn (userspace) and open5gs allow using it, but open5gs doesn't support
it.
+ * Also osmo-ggsn (gtp-u kernel module) is unable to use it due to kernel
implementation
+ * constrains, see OS#6382.
+ * Hence, run the test for completeness to test the GGSN, but expect/allow both
behaviors.
+ */
+ testcase TC_pdp6_act_deact_gtpu_access_ll_saddr() runs on GT_CT {
+ var Gtp1uUnitdata ud;
+
+ f_init();
+ var PdpContext ctx := valueof(t_DefinePDP(f_rnd_imsi('26242'H),
"1234", c_ApnInet6, valueof(t_EuaIPv6Dyn)));
+ ctx.pco_req := valueof(ts_PCO_IPv6_DNS);
+ f_pdp_ctx_act(ctx);
+
+ f_send_gtpu(ctx, f_icmpv6_rs_for_pdp(ctx));
+ f_wait_rtr_adv(ctx);
+ f_send_gtpu(ctx, f_gen_icmpv6_neigh_solicit_for_pdp(ctx));
+
+ var OCT16 dns1_addr := f_PCO_extract_proto(ctx.pco_neg, '0003'O);
+
+ /* Check if we can use valid link-local src addr. */
+ var OCT16 saddr_ll :=
f_ipv6_link_local(ctx.eua.endUserAddress.endUserAddressIPv6.ipv6_address);
+ f_send_gtpu(ctx, f_gen_icmpv6_echo(saddr_ll, dns1_addr));
+ T_default.start;
+ alt {
+ [] GTPU.receive(tr_GTPU_GPDU(g_peer_u, ?)) -> value ud {
+ var octetstring gpdu := ud.gtpu.gtpu_IEs.g_PDU_IEs.data;
+ var IPv6_packet ip6 := f_IPv6_dec(gpdu);
+ if (ip6.header.ver != 6 or ip6.header.nexthead != 58) {
+ repeat;
+ }
+ var PDU_ICMPv6 icmp6 := f_dec_PDU_ICMPv6(ip6.payload);
+ if (not match(icmp6, (tr_ICMPv6_ERP,tr_ICMPv6_DU))) {
+ repeat;
+ }
+ log("This GGSN does support forwarding link-local source address.");
+ T_default.stop;
+ }
+ [] GTPU.receive(tr_GTPU_GPDU(?, ?)) { repeat; }
+ [] GTPU.receive {
+ Misc_Helpers.f_shutdown(__BFILE__, __LINE__, fail,
+ log2str("Received unexpected GTPU while waiting for ICMPv6: ",
(tr_ICMPv6_ERP,tr_ICMPv6_DU)));
+ }
+ [] T_default.timeout {
+ log("This GGSN does NOT support forwarding link-local source address.");
+ }
+ }
+
+ f_pdp_ctx_del(ctx, '1'B);
+ f_shutdown_helper();
+ }
+
/* Check that attempting RA with another ll src addr won't work, packet dropped: */
testcase TC_pdp6_act_deact_gtpu_access_wrong_ll_saddr() runs on GT_CT {
f_init();
@@ -2246,6 +2292,7 @@
execute(TC_pdp6_act_deact_pcodns());
execute(TC_pdp6_act_deact_icmp6());
execute(TC_pdp6_act_deact_gtpu_access());
+ execute(TC_pdp6_act_deact_gtpu_access_ll_saddr());
execute(TC_pdp6_act_deact_gtpu_access_wrong_ll_saddr());
execute(TC_pdp6_act_deact_gtpu_access_wrong_global_saddr());
execute(TC_pdp6_act_deact_gtpu_access_ipv4_apn6());
--
To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/37688?usp=email
To unsubscribe, or for help writing mail filters, visit
https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-ttcn3-hacks
Gerrit-Branch: master
Gerrit-Change-Id: Icfae181ba1bb0dfb8a1a15dfe3a1d542ce69d88a
Gerrit-Change-Number: 37688
Gerrit-PatchSet: 1
Gerrit-Owner: pespin <pespin(a)sysmocom.de>
Gerrit-MessageType: newchange