21 Mar
2022
21 Mar
'22
9:57 p.m.
fixeria has uploaded this change for review. (
https://gerrit.osmocom.org/c/osmo-bts/+/27557 )
Change subject: osmo-bts-trx: rx_{tchh,tchf}_fn(): use AMR CMI lookup tables
......................................................................
osmo-bts-trx: rx_{tchh,tchf}_fn(): use AMR CMI lookup tables
3GPP TS 45.009 defines that Codec Mode Indications shall be sent
with speech frames having specific TDMA frame numbers of their
*first* bursts, which are defined in tables 3.2.1.3-{1,2,3,4}.
Performance-wise it's batter to have these tables implemented as
arrays, rather then using the 'switch' statement. We can simplify
things even further and have TDMA frame numbers corresponding to
the *last* bursts in them. This eliminates the need of doing an
additional last-to-first mapping, so that bi->fn can be used.
Change-Id: I46def864729c8f9063af201750456771ea5558d5
---
M src/osmo-bts-trx/sched_lchan_tchf.c
M src/osmo-bts-trx/sched_lchan_tchh.c
M src/osmo-bts-trx/sched_utils.h
3 files changed, 20 insertions(+), 12 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-bts refs/changes/57/27557/1
diff --git a/src/osmo-bts-trx/sched_lchan_tchf.c b/src/osmo-bts-trx/sched_lchan_tchf.c
index c8ad383..6a9a0f0 100644
--- a/src/osmo-bts-trx/sched_lchan_tchf.c
+++ b/src/osmo-bts-trx/sched_lchan_tchf.c
@@ -131,8 +131,7 @@
* the first FN 4,13,21 defines that CMR is included in frame.
* NOTE: A frame ends 7 FN after start.
*/
- fn_begin = trx_sched_lookup_fn(chan_state, 8);
- amr_is_cmr = !ul_amr_fn_is_cmi(fn_begin);
+ amr_is_cmr = !sched_tchf_ul_amr_cmi_map[bi->fn % 26];
/* The AFS_ONSET frame itself does not result into an RTP frame
* since it only contains a recognition pattern that marks the
diff --git a/src/osmo-bts-trx/sched_lchan_tchh.c b/src/osmo-bts-trx/sched_lchan_tchh.c
index 1778d36..369e35b 100644
--- a/src/osmo-bts-trx/sched_lchan_tchh.c
+++ b/src/osmo-bts-trx/sched_lchan_tchh.c
@@ -165,16 +165,7 @@
break;
}
- /* Calculate the frame number where the block begins. Note that
- * we need to traverse the measurement histort back by 6 bursts,
- * not by 4 bursts. The reason for this is that the burst shift
- * buffer we use for decoding is 6 bursts wide (one SACCH block) but
- * TCH/H blocks are only 4 bursts wide. The decoder functions look
- * at the beginning of the buffer while we shift into it at the end,
- * this means that TCH/H blocks always decoded delayed by two frame
- * number positions late. */
- fn_begin = trx_sched_lookup_fn(chan_state, 6);
- fn_is_cmi = ul_amr_fn_is_cmi(fn_begin);
+ fn_is_cmi = sched_tchh_ul_amr_cmi_map[bi->fn % 26];
/* See comment in function rx_tchf_fn() */
amr = 2;
diff --git a/src/osmo-bts-trx/sched_utils.h b/src/osmo-bts-trx/sched_utils.h
index f76e49b..398083d 100644
--- a/src/osmo-bts-trx/sched_utils.h
+++ b/src/osmo-bts-trx/sched_utils.h
@@ -37,6 +37,24 @@
return 10000 * n_errors / n_bits_total;
}
+/* 3GPP TS 45.009, table 3.2.1.3-{1,3}: AMR on Uplink TCH/F */
+static const uint8_t sched_tchf_ul_amr_cmi_map[26] = {
+ [7] = 1, /* TCH/F: first=0 / last=7 */
+ [16] = 1, /* TCH/F: first=8 / last=16 */
+ [24] = 1, /* TCH/F: first=17 / last=24 */
+};
+
+/* 3GPP TS 45.009, table 3.2.1.3-{2,4}: AMR on Uplink TCH/H */
+static const uint8_t sched_tchh_ul_amr_cmi_map[26] = {
+ [6] = 1, /* TCH/H(0): first=0 / last=6 */
+ [15] = 1, /* TCH/H(0): first=8 / last=15 */
+ [23] = 1, /* TCH/H(0): first=17 / last=23 */
+
+ [7] = 1, /* TCH/H(1): first=1 / last=7 */
+ [16] = 1, /* TCH/H(1): first=9 / last=16 */
+ [24] = 1, /* TCH/H(1): first=18 / last=24 */
+};
+
/*! determine whether an uplink AMR block is CMI according to 3GPP TS 45.009.
* \param[in] fn_begin frame number of the beginning of the block.
* \returns true in case of CMI; false otherwise. */
--
To view, visit https://gerrit.osmocom.org/c/osmo-bts/+/27557
To unsubscribe, or for help writing mail filters, visit
https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-bts
Gerrit-Branch: master
Gerrit-Change-Id: I46def864729c8f9063af201750456771ea5558d5
Gerrit-Change-Number: 27557
Gerrit-PatchSet: 1
Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-MessageType: newchange