Attention is currently required from: fixeria, laforge, pespin.
Hello Jenkins Builder, laforge, pespin,
I'd like you to reexamine a change. Please visit
https://gerrit.osmocom.org/c/osmo-msc/+/34870?usp=email
to look at the new patch set (#2).
The following approvals got outdated and were removed:
Verified+1 by Jenkins Builder
Change subject: manuals: add section about the SGs interface.
......................................................................
manuals: add section about the SGs interface.
The SGs interface is currently only casually mentioned in the chapter
running, even though the SGs interface is a prominent and often
requested feature. Let's give the SGs interface its own section so that
users can find the info about it quicker.
Related: OS#6008
Change-Id: Ic7c17511ee19cb7f6d5069b27beb661ecb4b0be8
---
M doc/manuals/chapters/running.adoc
A doc/manuals/chapters/sgs.adoc
M doc/manuals/osmomsc-usermanual.adoc
3 files changed, 74 insertions(+), 9 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-msc refs/changes/70/34870/2
--
To view, visit https://gerrit.osmocom.org/c/osmo-msc/+/34870?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-msc
Gerrit-Branch: master
Gerrit-Change-Id: Ic7c17511ee19cb7f6d5069b27beb661ecb4b0be8
Gerrit-Change-Number: 34870
Gerrit-PatchSet: 2
Gerrit-Owner: dexter <pmaier(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: pespin <pespin(a)sysmocom.de>
Gerrit-CC: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Attention: laforge <laforge(a)osmocom.org>
Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Attention: pespin <pespin(a)sysmocom.de>
Gerrit-MessageType: newpatchset
pespin has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-hnbgw/+/34922?usp=email )
Change subject: Increase default X31 val from 5 to 10 seconds
......................................................................
Increase default X31 val from 5 to 10 seconds
It was spotted that in some deploys with satellite links and heavy load,
the roundtrip times for CR and CC can go slightly over 5 seconds, so
better increase the default value to 10 seconds to be on a safer place
and avoid operation problems with default configuration.
Related: SYS#6602, SYS#6616
Change-Id: I24225cfc0addf326c239ec658a27b93b83a3e751
---
M src/osmo-hnbgw/tdefs.c
1 file changed, 16 insertions(+), 1 deletion(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-hnbgw refs/changes/22/34922/1
diff --git a/src/osmo-hnbgw/tdefs.c b/src/osmo-hnbgw/tdefs.c
index 601f704..7808b2c 100644
--- a/src/osmo-hnbgw/tdefs.c
+++ b/src/osmo-hnbgw/tdefs.c
@@ -34,7 +34,7 @@
struct osmo_tdef hnbgw_T_defs[] = {
{.T = 3113, .default_val = 15, .desc = "Time to keep Paging record, for CN pools with more than one link" },
{.T = 4, .default_val = 5, .desc = "Timeout to receive RANAP RESET ACKNOWLEDGE from an MSC/SGSN" },
- {.T = -31, .default_val = 5, .desc = "Timeout for discarding a partially released context map (RUA <-> SCCP)" },
+ {.T = -31, .default_val = 10, .desc = "Timeout for discarding a partially released context map (RUA <-> SCCP)" },
{.T = -1002, .default_val = 10, .desc = "Timeout for the HNB to respond to PS RAB Assignment Request" },
{ }
};
--
To view, visit https://gerrit.osmocom.org/c/osmo-hnbgw/+/34922?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-hnbgw
Gerrit-Branch: master
Gerrit-Change-Id: I24225cfc0addf326c239ec658a27b93b83a3e751
Gerrit-Change-Number: 34922
Gerrit-PatchSet: 1
Gerrit-Owner: pespin <pespin(a)sysmocom.de>
Gerrit-MessageType: newchange
dexter has submitted this change. ( https://gerrit.osmocom.org/c/osmo-msc/+/34871?usp=email )
Change subject: vlr_sgs: fix VTY setting for SGs counter.
......................................................................
vlr_sgs: fix VTY setting for SGs counter.
When trying to modify the value of an SGs counter (eg. ns11), then the
setting is never stored. The reason for this is that OsmoMSC uses the
wrong string table to compare the user input.
Related: OS#6008
Change-Id: I0358c1ec0026c37fda6db1f3af3145393df25cfd
---
M include/osmocom/msc/vlr_sgs.h
1 file changed, 15 insertions(+), 1 deletion(-)
Approvals:
Jenkins Builder: Verified
fixeria: Looks good to me, approved
diff --git a/include/osmocom/msc/vlr_sgs.h b/include/osmocom/msc/vlr_sgs.h
index 7231449..aade5d3 100644
--- a/include/osmocom/msc/vlr_sgs.h
+++ b/include/osmocom/msc/vlr_sgs.h
@@ -69,7 +69,7 @@
extern const struct value_string sgs_state_counter_names[];
static inline const char *vlr_sgs_state_counter_name(enum vlr_sgs_state_ctr Ns)
{
- return get_value_string(sgs_state_timer_names, Ns);
+ return get_value_string(sgs_state_counter_names, Ns);
}
/* This callback function is called when an SGs location update is complete */
--
To view, visit https://gerrit.osmocom.org/c/osmo-msc/+/34871?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-msc
Gerrit-Branch: master
Gerrit-Change-Id: I0358c1ec0026c37fda6db1f3af3145393df25cfd
Gerrit-Change-Number: 34871
Gerrit-PatchSet: 2
Gerrit-Owner: dexter <pmaier(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: dexter <pmaier(a)sysmocom.de>
Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: pespin <pespin(a)sysmocom.de>
Gerrit-MessageType: merged
pespin has uploaded this change for review. ( https://gerrit.osmocom.org/c/libosmo-sccp/+/34921?usp=email )
Change subject: sccp_scoc: Fix remote PC not assigned preventing RSLD to be sent in st WAIT_CONN_CONF
......................................................................
sccp_scoc: Fix remote PC not assigned preventing RSLD to be sent in st WAIT_CONN_CONF
Scenario: RUA Connect triggers SCCP CR towards peer, and we move to
CONN_PEND_OUT state where we expect to receive CC.
However, if some timer (like X31) times out before we receive CC (eg
because CC takes a long time to come), we end up in state
WAIT_CONN_CONF.
In that state, according to Figure C.2/Q.714 (sheet 2 of 7), among other
possibilite we wait for CC, and if it arrives, we send an RLSD to the
peer to inform him that we released the conn, and wait
for the peer to ack the RLSD, then release all state.
Given the scenario above, scoc_fsm_wait_conn_conf() was not assigning
the received OPC from the CC to the conn->remote_pc (unlike
scoc_fsm_conn_pend_out() which does it properly). As a result, when
trying to send teh RLSD it would fail and never transmit RLSD, taking
then a long time to release through T(rel) (10-20 seconds), and probably
longer in the peer (T(iar) or similar?).
Rua Connect triggers tx of SCCP CC:
Received SCCP User Primitive (N-CONNECT.request)
XUA_AS(as-clnt-msc-0)[0x55f11c7df980]{AS_ACTIVE}: Received Event AS-TRANSFER.req //Tx CC
SCCP-SCOC(929)[0x55f11c909c90]{IDLE}: State change to CONN_PEND_OUT (no timeout)
...
X31 timeout triggers state change:
map_sccp(...-SCCP-929)[0x55f11c909820]{wait_cc}: Timeout of X31
SCCP-SCOC(929)[0x55f11c909c90]{CONN_PEND_OUT}: Received Event N-DISCONNECT.req
SCCP-SCOC(929)[0x55f11c909c90]{CONN_PEND_OUT}: State change to WAIT_CONN_CONF (no timeout)
...
CC arrives, but conn_remote_pc is not properly assigned and tx of RLSD fails:
SCCP-SCOC(929)[0x55f11c909c90]{WAIT_CONN_CONF}: Received Event RCOC-CONNECT_CONFIRM.ind
MTP-TRANSFER.req from SCCP without DPC?!? called=RI=0 // PROBLEM HERE!!!!
SCCP-SCOC(929)[0x55f11c909c90]{WAIT_CONN_CONF}: State change to DISCONN_PEND (no timeout)
...
SCCP-SCOC(929)[0x55f11c909c90]{DISCONN_PEND}: Received Event T(rel)_expired
Related: SYS#6616
Change-Id: I9f9f78c92dd95f38af7b03037e60a1c993d7e5b0
---
M src/sccp_scoc.c
1 file changed, 52 insertions(+), 0 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/libosmo-sccp refs/changes/21/34921/1
diff --git a/src/sccp_scoc.c b/src/sccp_scoc.c
index e273d17..0e1eb34 100644
--- a/src/sccp_scoc.c
+++ b/src/sccp_scoc.c
@@ -1160,6 +1160,13 @@
conn_stop_connect_timer(conn);
/* associate rem ref to conn */
conn->remote_ref = xua_msg_get_u32(xua, SUA_IEI_SRC_REF);
+ /* 3.1.4.2 The node sending the CC message (identified
+ * by the parameter OPC contained in the
+ * MTP-TRANSFER.indication primitive which conveyed the
+ * CC message [plus the MTP-SAP instance]) is associated
+ * with the connection section. */
+ conn->remote_pc = xua->mtp.opc;
+
/* released to SCRC */
xua_gen_relre_and_send(conn, conn->release_cause, NULL);
/* start rel timer */
--
To view, visit https://gerrit.osmocom.org/c/libosmo-sccp/+/34921?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: libosmo-sccp
Gerrit-Branch: master
Gerrit-Change-Id: I9f9f78c92dd95f38af7b03037e60a1c993d7e5b0
Gerrit-Change-Number: 34921
Gerrit-PatchSet: 1
Gerrit-Owner: pespin <pespin(a)sysmocom.de>
Gerrit-MessageType: newchange
Attention is currently required from: fixeria, laforge, pespin.
dexter has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-msc/+/34871?usp=email )
Change subject: vlr_sgs: fix VTY setting for SGs counter.
......................................................................
Patch Set 2:
(1 comment)
Commit Message:
https://gerrit.osmocom.org/c/osmo-msc/+/34871/comment/ab0b5b9d_81ab0571
PS1, Line 10: setting is nevers stored. The reason for this is that OsmoMSC uses the
> never
Done
--
To view, visit https://gerrit.osmocom.org/c/osmo-msc/+/34871?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-msc
Gerrit-Branch: master
Gerrit-Change-Id: I0358c1ec0026c37fda6db1f3af3145393df25cfd
Gerrit-Change-Number: 34871
Gerrit-PatchSet: 2
Gerrit-Owner: dexter <pmaier(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: laforge <laforge(a)osmocom.org>
Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Attention: pespin <pespin(a)sysmocom.de>
Gerrit-Comment-Date: Mon, 30 Oct 2023 16:21:25 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Comment-In-Reply-To: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-MessageType: comment
Attention is currently required from: dexter, fixeria, laforge, pespin.
Hello Jenkins Builder, fixeria, laforge, pespin,
I'd like you to reexamine a change. Please visit
https://gerrit.osmocom.org/c/osmo-msc/+/34871?usp=email
to look at the new patch set (#2).
The following approvals got outdated and were removed:
Code-Review+2 by fixeria, Verified+1 by Jenkins Builder
The change is no longer submittable: Code-Review and Verified are unsatisfied now.
Change subject: vlr_sgs: fix VTY setting for SGs counter.
......................................................................
vlr_sgs: fix VTY setting for SGs counter.
When trying to modify the value of an SGs counter (eg. ns11), then the
setting is never stored. The reason for this is that OsmoMSC uses the
wrong string table to compare the user input.
Related: OS#6008
Change-Id: I0358c1ec0026c37fda6db1f3af3145393df25cfd
---
M include/osmocom/msc/vlr_sgs.h
1 file changed, 15 insertions(+), 1 deletion(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-msc refs/changes/71/34871/2
--
To view, visit https://gerrit.osmocom.org/c/osmo-msc/+/34871?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-msc
Gerrit-Branch: master
Gerrit-Change-Id: I0358c1ec0026c37fda6db1f3af3145393df25cfd
Gerrit-Change-Number: 34871
Gerrit-PatchSet: 2
Gerrit-Owner: dexter <pmaier(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: laforge <laforge(a)osmocom.org>
Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Attention: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: dexter <pmaier(a)sysmocom.de>
Gerrit-MessageType: newpatchset
Attention is currently required from: fixeria, laforge, pespin.
dexter has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-msc/+/34869?usp=email )
Change subject: running: fix link to MNCC for External Call Control
......................................................................
Patch Set 1:
(1 comment)
Commit Message:
https://gerrit.osmocom.org/c/osmo-msc/+/34869/comment/1edc9e6f_9ee274a2
PS1, Line 11: outdated
> Not sure what you mean by "outdated" here. […]
Strange. I have downloaded the most recent version of the manual now and now the link is working. It didn't work before, that is why I thought that I should fix it - never mind.
--
To view, visit https://gerrit.osmocom.org/c/osmo-msc/+/34869?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-msc
Gerrit-Branch: master
Gerrit-Change-Id: I5b0fd848e6b28bf670d9994da8a56cb613158290
Gerrit-Change-Number: 34869
Gerrit-PatchSet: 1
Gerrit-Owner: dexter <pmaier(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: laforge <laforge(a)osmocom.org>
Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Attention: pespin <pespin(a)sysmocom.de>
Gerrit-Comment-Date: Mon, 30 Oct 2023 16:11:23 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Comment-In-Reply-To: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-MessageType: comment
Attention is currently required from: fixeria, jolly.
pespin has posted comments on this change. ( https://gerrit.osmocom.org/c/osmocom-bb/+/34906?usp=email )
Change subject: ASCI: Notify talker in the VTY that he cannot leave the call while talking
......................................................................
Patch Set 2: Code-Review+2
--
To view, visit https://gerrit.osmocom.org/c/osmocom-bb/+/34906?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmocom-bb
Gerrit-Branch: master
Gerrit-Change-Id: I497efc5bddc122cd5744de531917aad415ac1654
Gerrit-Change-Number: 34906
Gerrit-PatchSet: 2
Gerrit-Owner: jolly <andreas(a)eversberg.eu>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: jolly <andreas(a)eversberg.eu>
Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Comment-Date: Mon, 30 Oct 2023 15:21:01 +0000
Gerrit-HasComments: No
Gerrit-Has-Labels: Yes
Gerrit-MessageType: comment
Attention is currently required from: arehbein, pespin.
laforge has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-remsim/+/34919?usp=email )
Change subject: bankd: Use gsmtap_inst_fd2()
......................................................................
Patch Set 1:
(1 comment)
Patchset:
PS1:
> Not entirely sure if the TODO-RELEASE line should look like this
the format is not that critical, it is a file that is read by humans.
--
To view, visit https://gerrit.osmocom.org/c/osmo-remsim/+/34919?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-remsim
Gerrit-Branch: master
Gerrit-Change-Id: I2a7736d6fba795b2c479b2a0bc371b90f838ed61
Gerrit-Change-Number: 34919
Gerrit-PatchSet: 1
Gerrit-Owner: arehbein <arehbein(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: arehbein <arehbein(a)sysmocom.de>
Gerrit-Attention: pespin <pespin(a)sysmocom.de>
Gerrit-Comment-Date: Mon, 30 Oct 2023 15:12:12 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Comment-In-Reply-To: arehbein <arehbein(a)sysmocom.de>
Gerrit-MessageType: comment
Attention is currently required from: jolly.
laforge has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-bsc/+/34920?usp=email )
Change subject: SI10: Fix uninitialized l_bts pointer
......................................................................
Patch Set 1:
(1 comment)
File src/osmo-bsc/system_information.c:
https://gerrit.osmocom.org/c/osmo-bsc/+/34920/comment/fb926222_9f7eb51d
PS1, Line 1424: struct gsm_bts *s_bts = conn->lchan->ts->trx->bts, *l_bts;
are you sure you don't need to NULL-intitialize it? At first sight it looks like it's possible to call si10_rest_octets_encode_other with a l_bts pointer that hasn't been initialized yet.
--
To view, visit https://gerrit.osmocom.org/c/osmo-bsc/+/34920?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-bsc
Gerrit-Branch: master
Gerrit-Change-Id: I9dbbd066075f9ccb331616a2b59b46b1b44c8b4c
Gerrit-Change-Number: 34920
Gerrit-PatchSet: 1
Gerrit-Owner: jolly <andreas(a)eversberg.eu>
Gerrit-Reviewer: Jenkins Builder
Gerrit-CC: laforge <laforge(a)osmocom.org>
Gerrit-Attention: jolly <andreas(a)eversberg.eu>
Gerrit-Comment-Date: Mon, 30 Oct 2023 15:11:21 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Gerrit-MessageType: comment
Attention is currently required from: fixeria, pespin.
jolly has posted comments on this change. ( https://gerrit.osmocom.org/c/osmocom-bb/+/34906?usp=email )
Change subject: ASCI: Notify talker in the VTY that he cannot leave the call while talking
......................................................................
Patch Set 1:
(1 comment)
File src/host/layer23/src/mobile/gsm44068_gcc_bcc.c:
https://gerrit.osmocom.org/c/osmocom-bb/+/34906/comment/49bcb13d_ca495d79
PS1, Line 1854: vgcs_vty_notify(trans, "Cannot leave while talking\n");
> shouldn't this be returning an error instead of changing state below?
It returns an error. I moved the statements (as we discussed in the chat) inside the if-block.
--
To view, visit https://gerrit.osmocom.org/c/osmocom-bb/+/34906?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmocom-bb
Gerrit-Branch: master
Gerrit-Change-Id: I497efc5bddc122cd5744de531917aad415ac1654
Gerrit-Change-Number: 34906
Gerrit-PatchSet: 1
Gerrit-Owner: jolly <andreas(a)eversberg.eu>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-CC: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Comment-Date: Mon, 30 Oct 2023 12:35:10 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Comment-In-Reply-To: pespin <pespin(a)sysmocom.de>
Gerrit-MessageType: comment
Attention is currently required from: fixeria, jolly.
Hello Jenkins Builder, fixeria,
I'd like you to reexamine a change. Please visit
https://gerrit.osmocom.org/c/osmocom-bb/+/34906?usp=email
to look at the new patch set (#2).
The following approvals got outdated and were removed:
Code-Review+1 by fixeria, Verified+1 by Jenkins Builder
Change subject: ASCI: Notify talker in the VTY that he cannot leave the call while talking
......................................................................
ASCI: Notify talker in the VTY that he cannot leave the call while talking
Related: OS#5364
Change-Id: I497efc5bddc122cd5744de531917aad415ac1654
---
M src/host/layer23/src/mobile/gsm44068_gcc_bcc.c
1 file changed, 12 insertions(+), 0 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmocom-bb refs/changes/06/34906/2
--
To view, visit https://gerrit.osmocom.org/c/osmocom-bb/+/34906?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmocom-bb
Gerrit-Branch: master
Gerrit-Change-Id: I497efc5bddc122cd5744de531917aad415ac1654
Gerrit-Change-Number: 34906
Gerrit-PatchSet: 2
Gerrit-Owner: jolly <andreas(a)eversberg.eu>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-CC: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: jolly <andreas(a)eversberg.eu>
Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-MessageType: newpatchset
Attention is currently required from: laforge, manawyrm, tnt.
Hello Jenkins Builder, manawyrm, tnt,
I'd like you to reexamine a change. Please visit
https://gerrit.osmocom.org/c/osmo-e1d/+/27579?usp=email
to look at the new patch set (#5).
The following approvals got outdated and were removed:
Verified-1 by Jenkins Builder
Change subject: usb: Deal with truncated ISO IN transfers
......................................................................
usb: Deal with truncated ISO IN transfers
It seems that in some circumstances, an ISO IN transfer can be
truncated by the bus / host. In such situation we'd currently pass
a non-modulo-32 length to the mux_demux (deframer) code, and it ASSERTs
on that. Let's try to handle this more gracefully by substituting
random garbage and letting higher layers deal with massive bit errors.
Related: OS#5490
Change-Id: Ic453325b93b0e12727625a1495a948d96df4b542
---
M src/e1d.h
M src/intf_line.c
M src/usb.c
3 files changed, 45 insertions(+), 0 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-e1d refs/changes/79/27579/5
--
To view, visit https://gerrit.osmocom.org/c/osmo-e1d/+/27579?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-e1d
Gerrit-Branch: master
Gerrit-Change-Id: Ic453325b93b0e12727625a1495a948d96df4b542
Gerrit-Change-Number: 27579
Gerrit-PatchSet: 5
Gerrit-Owner: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: manawyrm <osmocom.account(a)tbspace.de>
Gerrit-Reviewer: tnt <tnt(a)246tNt.com>
Gerrit-Attention: manawyrm <osmocom.account(a)tbspace.de>
Gerrit-Attention: laforge <laforge(a)osmocom.org>
Gerrit-Attention: tnt <tnt(a)246tNt.com>
Gerrit-MessageType: newpatchset
jolly has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-bsc/+/34920?usp=email )
Change subject: SI10: Fix uninitialized l_bts pointer
......................................................................
SI10: Fix uninitialized l_bts pointer
l_bts must be declared outside the for-loop. If the loop is passed with
n_bts set the first time, l_bts is set. If the loop is passed with
n_bts set next time(s), l_bts is used to encode additional neighbor
cell infos.
Related: CID#330310 and CID#330311
Change-Id: I9dbbd066075f9ccb331616a2b59b46b1b44c8b4c
---
M src/osmo-bsc/system_information.c
1 file changed, 17 insertions(+), 2 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-bsc refs/changes/20/34920/1
diff --git a/src/osmo-bsc/system_information.c b/src/osmo-bsc/system_information.c
index 477e9fa..2e9d8dd 100644
--- a/src/osmo-bsc/system_information.c
+++ b/src/osmo-bsc/system_information.c
@@ -1421,7 +1421,7 @@
const struct gsm_subscriber_connection *conn)
{
struct bitvec *nbv;
- struct gsm_bts *s_bts = conn->lchan->ts->trx->bts;
+ struct gsm_bts *s_bts = conn->lchan->ts->trx->bts, *l_bts;
int i;
bool any_neighbor = false;
int rc;
@@ -1443,7 +1443,7 @@
/* Get up to 32 possible neighbor frequencies that SI10 can refer to. */
for (i = 0; i < 32; i++) {
- struct gsm_bts *c_bts, *n_bts, *l_bts;
+ struct gsm_bts *c_bts, *n_bts;
struct gsm_subscriber_connection *c;
unsigned int save_cur_bit;
int16_t arfcn;
--
To view, visit https://gerrit.osmocom.org/c/osmo-bsc/+/34920?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-bsc
Gerrit-Branch: master
Gerrit-Change-Id: I9dbbd066075f9ccb331616a2b59b46b1b44c8b4c
Gerrit-Change-Number: 34920
Gerrit-PatchSet: 1
Gerrit-Owner: jolly <andreas(a)eversberg.eu>
Gerrit-MessageType: newchange
Attention is currently required from: manawyrm, tnt.
Jenkins Builder has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-e1d/+/27579?usp=email )
Change subject: usb: Deal with truncated ISO IN transfers
......................................................................
Patch Set 4:
(1 comment)
File src/intf_line.c:
Robot Comment from checkpatch (run ID jenkins-gerrit-lint-12185):
https://gerrit.osmocom.org/c/osmo-e1d/+/27579/comment/ebe55d76_34061d59
PS4, Line 63: [LINE_CTR_USB_ISO_TRUNC] = { "rx:usb_iso_trunc", "USB ISO packets truncated" },
please, no space before tabs
--
To view, visit https://gerrit.osmocom.org/c/osmo-e1d/+/27579?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-e1d
Gerrit-Branch: master
Gerrit-Change-Id: Ic453325b93b0e12727625a1495a948d96df4b542
Gerrit-Change-Number: 27579
Gerrit-PatchSet: 4
Gerrit-Owner: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: manawyrm <osmocom.account(a)tbspace.de>
Gerrit-Reviewer: tnt <tnt(a)246tNt.com>
Gerrit-Attention: manawyrm <osmocom.account(a)tbspace.de>
Gerrit-Attention: tnt <tnt(a)246tNt.com>
Gerrit-Comment-Date: Mon, 30 Oct 2023 11:36:09 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Gerrit-MessageType: comment
Attention is currently required from: manawyrm, tnt.
Hello Jenkins Builder, manawyrm, tnt,
I'd like you to reexamine a change. Please visit
https://gerrit.osmocom.org/c/osmo-e1d/+/27579?usp=email
to look at the new patch set (#4).
The following approvals got outdated and were removed:
Verified+1 by Jenkins Builder
Change subject: usb: Deal with truncated ISO IN transfers
......................................................................
usb: Deal with truncated ISO IN transfers
It seems that in some circumstances, an ISO IN transfer can be
truncated by the bus / host. In such situation we'd currently pass
a non-modulo-32 length to the mux_demux (deframer) code, and it ASSERTs
on that. Let's try to handle this more gracefully by substituting
random garbage and letting higher layers deal with massive bit errors.
Related: OS#5490
Change-Id: Ic453325b93b0e12727625a1495a948d96df4b542
---
M src/e1d.h
M src/intf_line.c
M src/usb.c
3 files changed, 45 insertions(+), 0 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-e1d refs/changes/79/27579/4
--
To view, visit https://gerrit.osmocom.org/c/osmo-e1d/+/27579?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-e1d
Gerrit-Branch: master
Gerrit-Change-Id: Ic453325b93b0e12727625a1495a948d96df4b542
Gerrit-Change-Number: 27579
Gerrit-PatchSet: 4
Gerrit-Owner: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: manawyrm <osmocom.account(a)tbspace.de>
Gerrit-Reviewer: tnt <tnt(a)246tNt.com>
Gerrit-Attention: manawyrm <osmocom.account(a)tbspace.de>
Gerrit-Attention: tnt <tnt(a)246tNt.com>
Gerrit-MessageType: newpatchset
Attention is currently required from: manawyrm, tnt.
Hello Jenkins Builder, manawyrm, tnt,
I'd like you to reexamine a change. Please visit
https://gerrit.osmocom.org/c/osmo-e1d/+/27579?usp=email
to look at the new patch set (#3).
The following approvals got outdated and were removed:
Verified+1 by Jenkins Builder
Change subject: usb: Deal with truncated ISO IN transfers
......................................................................
usb: Deal with truncated ISO IN transfers
It seems that in some circumstances, an ISO IN transfer can be
truncated by the bus / host. In such situation we'd currently pass
a non-modulo-32 length to the mux_demux (deframer) code, and it ASSERTs
on that. Let's try to handle this more gracefully by substituting
random garbage and letting higher layers deal with massive bit errors.
Related: OS#5490
Change-Id: Ic453325b93b0e12727625a1495a948d96df4b542
---
M src/usb.c
1 file changed, 41 insertions(+), 0 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-e1d refs/changes/79/27579/3
--
To view, visit https://gerrit.osmocom.org/c/osmo-e1d/+/27579?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-e1d
Gerrit-Branch: master
Gerrit-Change-Id: Ic453325b93b0e12727625a1495a948d96df4b542
Gerrit-Change-Number: 27579
Gerrit-PatchSet: 3
Gerrit-Owner: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: manawyrm <osmocom.account(a)tbspace.de>
Gerrit-Reviewer: tnt <tnt(a)246tNt.com>
Gerrit-Attention: manawyrm <osmocom.account(a)tbspace.de>
Gerrit-Attention: tnt <tnt(a)246tNt.com>
Gerrit-MessageType: newpatchset
arehbein has posted comments on this change. ( https://gerrit.osmocom.org/c/libosmocore/+/34720?usp=email )
Change subject: gsmtap: Hide implementation of gsmtap_inst
......................................................................
Patch Set 5:
(1 comment)
Patchset:
PS5:
> osmo-remsim: create a TODO-RELEASE file if it exists. […]
I have uploaded https://gerrit.osmocom.org/c/osmo-remsim/+/34919 for osmo-remsim.
@laforge@osmocom.org I suppose "you don't need to worry" means that I don't have to upload any changes at all for osmocom-bb as well as simtrace2?
Just checking because simtrace2.git:host/lib/gsmtap.c contains a call to `gsmtap_inst_fd()` and host code does make use of system libosmocore
--
To view, visit https://gerrit.osmocom.org/c/libosmocore/+/34720?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: libosmocore
Gerrit-Branch: master
Gerrit-Change-Id: Ibe1a51205a6df764571b6d074e365825555609a5
Gerrit-Change-Number: 34720
Gerrit-PatchSet: 5
Gerrit-Owner: arehbein <arehbein(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: arehbein <arehbein(a)sysmocom.de>
Gerrit-Reviewer: daniel <dwillmann(a)sysmocom.de>
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: pespin <pespin(a)sysmocom.de>
Gerrit-Comment-Date: Mon, 30 Oct 2023 11:26:03 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Comment-In-Reply-To: arehbein <arehbein(a)sysmocom.de>
Comment-In-Reply-To: laforge <laforge(a)osmocom.org>
Comment-In-Reply-To: pespin <pespin(a)sysmocom.de>
Gerrit-MessageType: comment
laforge has restored this change. ( https://gerrit.osmocom.org/c/osmo-e1d/+/27578?usp=email )
Change subject: usb: Pass not just the actual transfer length but also the buffer size
......................................................................
Restored
--
To view, visit https://gerrit.osmocom.org/c/osmo-e1d/+/27578?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-e1d
Gerrit-Branch: master
Gerrit-Change-Id: I5088a5213d2945fdfaf3b242a63e35d0ed511914
Gerrit-Change-Number: 27578
Gerrit-PatchSet: 2
Gerrit-Owner: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-Reviewer: manawyrm <osmocom.account(a)tbspace.de>
Gerrit-Reviewer: tnt <tnt(a)246tNt.com>
Gerrit-MessageType: restore
Attention is currently required from: pespin.
arehbein has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-remsim/+/34919?usp=email )
Change subject: bankd: Use gsmtap_inst_fd2()
......................................................................
Patch Set 1:
(1 comment)
Patchset:
PS1:
Not entirely sure if the TODO-RELEASE line should look like this
--
To view, visit https://gerrit.osmocom.org/c/osmo-remsim/+/34919?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-remsim
Gerrit-Branch: master
Gerrit-Change-Id: I2a7736d6fba795b2c479b2a0bc371b90f838ed61
Gerrit-Change-Number: 34919
Gerrit-PatchSet: 1
Gerrit-Owner: arehbein <arehbein(a)sysmocom.de>
Gerrit-Reviewer: pespin <pespin(a)sysmocom.de>
Gerrit-CC: Jenkins Builder
Gerrit-Attention: pespin <pespin(a)sysmocom.de>
Gerrit-Comment-Date: Mon, 30 Oct 2023 11:16:24 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Gerrit-MessageType: comment
arehbein has uploaded this change for review. ( https://gerrit.osmocom.org/c/osmo-remsim/+/34919?usp=email )
Change subject: bankd: Use gsmtap_inst_fd2()
......................................................................
bankd: Use gsmtap_inst_fd2()
- Use gsmtap_inst_fd2() because gsmtap_inst_fd() is deprecated
- Add TODO-RELEASE file
Related: OS#6213
Change-Id: I2a7736d6fba795b2c479b2a0bc371b90f838ed61
---
A TODO-RELEASE
M src/bankd/gsmtap.c
2 files changed, 24 insertions(+), 1 deletion(-)
git pull ssh://gerrit.osmocom.org:29418/osmo-remsim refs/changes/19/34919/1
diff --git a/TODO-RELEASE b/TODO-RELEASE
new file mode 100644
index 0000000..4a35f50
--- /dev/null
+++ b/TODO-RELEASE
@@ -0,0 +1,10 @@
+# When cleaning up this file: bump API version in corresponding Makefile.am and rename corresponding debian/lib*.install
+# according to https://www.gnu.org/software/libtool/manual/html_node/Updating-version-info…
+# In short:
+# LIBVERSION=c:r:a
+# If the library source code has changed at all since the last update, then increment revision: c:r + 1:a.
+# If any interfaces have been added, removed, or changed since the last update: c + 1:0:0.
+# If any interfaces have been added since the last public release: c:r:a + 1.
+# If any interfaces have been removed or changed since the last public release: c:r:0.
+#library what description / commit summary line
+libosmocore > 1.9.0 working (compiling) gsmtap_inst_fd2()
diff --git a/src/bankd/gsmtap.c b/src/bankd/gsmtap.c
index 8aced6a..7bdbe51 100644
--- a/src/bankd/gsmtap.c
+++ b/src/bankd/gsmtap.c
@@ -97,7 +97,7 @@
LOGP(DGSMTAP, LOGL_DEBUG, "sending APDU sub_type=%u, mdm_tpdu len=%u, sim_tpdu len=%u, iov cnt=%u\n",
sub_type, mdm_tpdu_len, sim_tpdu_len, cnt);
- const int rc = writev(gsmtap_inst_fd(g_gti), iov, cnt);
+ const int rc = writev(gsmtap_inst_fd2(g_gti), iov, cnt);
if (rc < 0) {
char errtxt[128];
LOGP(DGSMTAP, LOGL_ERROR, "writev() failed with errno=%d: %s\n", errno, strerror_r(errno,
--
To view, visit https://gerrit.osmocom.org/c/osmo-remsim/+/34919?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-remsim
Gerrit-Branch: master
Gerrit-Change-Id: I2a7736d6fba795b2c479b2a0bc371b90f838ed61
Gerrit-Change-Number: 34919
Gerrit-PatchSet: 1
Gerrit-Owner: arehbein <arehbein(a)sysmocom.de>
Gerrit-MessageType: newchange
Attention is currently required from: fixeria, jolly, laforge.
pespin has posted comments on this change. ( https://gerrit.osmocom.org/c/osmocom-bb/+/34913?usp=email )
Change subject: mobile: cosmetic: rename TCH_IOFF_RTP to TCH_IOFF_OSMO
......................................................................
Patch Set 2:
(1 comment)
File src/host/layer23/src/mobile/vty_interface.c:
https://gerrit.osmocom.org/c/osmocom-bb/+/34913/comment/2ef03260_a809923d
PS2, Line 2569: "(same as 'osmo', kept for backwards-compatibility)\n"
better put the rtp in a different cmd and mark is a deprecated.
--
To view, visit https://gerrit.osmocom.org/c/osmocom-bb/+/34913?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmocom-bb
Gerrit-Branch: master
Gerrit-Change-Id: I780d0a9fc20244ffa34307fb3d00f3848b6dcc76
Gerrit-Change-Number: 34913
Gerrit-PatchSet: 2
Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: jolly <andreas(a)eversberg.eu>
Gerrit-CC: laforge <laforge(a)osmocom.org>
Gerrit-CC: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: jolly <andreas(a)eversberg.eu>
Gerrit-Attention: laforge <laforge(a)osmocom.org>
Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Comment-Date: Mon, 30 Oct 2023 09:51:18 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Gerrit-MessageType: comment
Attention is currently required from: fixeria, jolly.
pespin has posted comments on this change. ( https://gerrit.osmocom.org/c/osmocom-bb/+/34911?usp=email )
Change subject: mobile: rename 'audio' node to 'tch' node
......................................................................
Patch Set 2:
(1 comment)
File src/host/layer23/src/mobile/vty_interface.c:
https://gerrit.osmocom.org/c/osmocom-bb/+/34911/comment/1174c9cc_255481c7
PS2, Line 1479: vty_out(vty, " io-handler %s%s",
I think all of this is still tightly related to audio calls, not data calls, and probably you want to have a separate section to configure how to handle data calls.
So not sure the change you are doing here is the best way to go.
--
To view, visit https://gerrit.osmocom.org/c/osmocom-bb/+/34911?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmocom-bb
Gerrit-Branch: master
Gerrit-Change-Id: I2cab597c5de92ecb343cad7aaaa48035ca5f8365
Gerrit-Change-Number: 34911
Gerrit-PatchSet: 2
Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: jolly <andreas(a)eversberg.eu>
Gerrit-Reviewer: laforge <laforge(a)osmocom.org>
Gerrit-CC: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: jolly <andreas(a)eversberg.eu>
Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Comment-Date: Mon, 30 Oct 2023 09:48:31 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Gerrit-MessageType: comment
Attention is currently required from: fixeria, lynxis lazus, pespin.
osmith has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/34895?usp=email )
Change subject: epdg: Test Handover from Wifi back to LTE
......................................................................
Patch Set 2:
(2 comments)
File epdg/EPDG_Tests.ttcn:
https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/34895/comment/9e5e5c5d_1e61…
PS1, Line 451: setverdict(pass);
> The cause you mention is sent by us (ttcn3 emulating PGW) to osmo-epdg in DeleteBearerRequest, so no […]
Ack
https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/34895/comment/c1cb7b2e_9086…
PS1, Line 459: /* f_gtp2_register_udmsg('63'O); TODO: is this needed? */
> Ack I forgot to drop it.
Done
--
To view, visit https://gerrit.osmocom.org/c/osmo-ttcn3-hacks/+/34895?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmo-ttcn3-hacks
Gerrit-Branch: master
Gerrit-Change-Id: I299faf28fa51dbc5d2de6c72a39a01eca67a5775
Gerrit-Change-Number: 34895
Gerrit-PatchSet: 2
Gerrit-Owner: pespin <pespin(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Reviewer: lynxis lazus <lynxis(a)fe80.eu>
Gerrit-Reviewer: osmith <osmith(a)sysmocom.de>
Gerrit-Attention: pespin <pespin(a)sysmocom.de>
Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Attention: lynxis lazus <lynxis(a)fe80.eu>
Gerrit-Comment-Date: Mon, 30 Oct 2023 09:35:28 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Comment-In-Reply-To: osmith <osmith(a)sysmocom.de>
Comment-In-Reply-To: pespin <pespin(a)sysmocom.de>
Gerrit-MessageType: comment
Attention is currently required from: jolly, laforge.
fixeria has posted comments on this change. ( https://gerrit.osmocom.org/c/osmocom-bb/+/34913?usp=email )
Change subject: mobile: cosmetic: rename TCH_IOFF_RTP to TCH_IOFF_OSMO
......................................................................
Patch Set 2:
(1 comment)
Patchset:
PS2:
> Do we ever communicate CSD data in a non-RTP (and hence non-rate-adapted) fashion?
On the L1CTL interface - yes. The `TRAFFIC.ind` messages currently carry packed bits generated by the convolutional decoder, and similarly the `TRAFFIC.req` messages carry packed bits to be fed to the convolutional encoder. In the case of TCH/F9.6 it's `4 * 60 == 240 bits / 8 == 30 bytes`.
The difference between 'osmo' and 'ti' is the endianness: Calypso firmware emits frames with bytes swapped in words (`\x01\x02\x03\x04` becomes `\x02\x01\x04\x03`). While we could modify the firmware and make it emit frames in big endian (like trxcon does), this would break regular voice calls because the TI format block in libosmogapk expects the little endian ordering.
For now I don't see a need for the L1 PHY (be it Calypso firmware or trxcon/virtphy) to perform the rate adaptation to 64 kbit/s like the BSS does. This would impose even higher bandwidth requirements on the serial interface between the host and the firmware (4 x times for TCH/F9.6). We can always do this on the host side, if needed, right?
--
To view, visit https://gerrit.osmocom.org/c/osmocom-bb/+/34913?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmocom-bb
Gerrit-Branch: master
Gerrit-Change-Id: I780d0a9fc20244ffa34307fb3d00f3848b6dcc76
Gerrit-Change-Number: 34913
Gerrit-PatchSet: 2
Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-Reviewer: jolly <andreas(a)eversberg.eu>
Gerrit-CC: laforge <laforge(a)osmocom.org>
Gerrit-Attention: jolly <andreas(a)eversberg.eu>
Gerrit-Attention: laforge <laforge(a)osmocom.org>
Gerrit-Comment-Date: Mon, 30 Oct 2023 09:15:20 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Comment-In-Reply-To: laforge <laforge(a)osmocom.org>
Gerrit-MessageType: comment
Attention is currently required from: fixeria.
laforge has posted comments on this change. ( https://gerrit.osmocom.org/c/osmocom-bb/+/34915?usp=email )
Change subject: mobile: add params and VTY commands for data calls
......................................................................
Patch Set 2:
(1 comment)
Patchset:
PS2:
so this just adds the VTY settings but no actual implementation? I would argue the two belong together in one patch?
--
To view, visit https://gerrit.osmocom.org/c/osmocom-bb/+/34915?usp=email
To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings
Gerrit-Project: osmocom-bb
Gerrit-Branch: master
Gerrit-Change-Id: If52fa70cb202f0736a17fe8eb63d226186637f62
Gerrit-Change-Number: 34915
Gerrit-PatchSet: 2
Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Reviewer: Jenkins Builder
Gerrit-CC: laforge <laforge(a)osmocom.org>
Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de>
Gerrit-Comment-Date: Mon, 30 Oct 2023 08:48:33 +0000
Gerrit-HasComments: Yes
Gerrit-Has-Labels: No
Gerrit-MessageType: comment