January 2022 - gerrit-log - lists.osmocom.org

Change in docker-playground[master]: osmo-uecups-master/Dockerfile: do not pass command line options

by fixeria

Attention is currently required from: fixeria. fixeria has uploaded a new patch set (#2). ( https://gerrit.osmocom.org/c/docker-playground/+/26982 ) Change subject: osmo-uecups-master/Dockerfile: do not pass command line options ...................................................................... osmo-uecups-master/Dockerfile: do not pass command line options Change-Id: Ia9b220e4cfbc89b800fafdd153bd63d6d95799e2 Related: SYS#5602 --- M osmo-uecups-master/Dockerfile 1 file changed, 3 insertions(+), 1 deletion(-) git pull ssh://gerrit.osmocom.org:29418/docker-playground refs/changes/82/26982/2 -- To view, visit https://gerrit.osmocom.org/c/docker-playground/+/26982 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: docker-playground Gerrit-Branch: master Gerrit-Change-Id: Ia9b220e4cfbc89b800fafdd153bd63d6d95799e2 Gerrit-Change-Number: 26982 Gerrit-PatchSet: 2 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-CC: laforge <laforge(a)osmocom.org> Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-MessageType: newpatchset

3 years, 4 months

1
0
0 0

Change in simtrace2[master]: simtrace2-cardem-pcsc: Detect card power-up without RESET

by laforge

laforge has uploaded this change for review. ( https://gerrit.osmocom.org/c/simtrace2/+/27001 ) Change subject: simtrace2-cardem-pcsc: Detect card power-up without RESET ...................................................................... simtrace2-cardem-pcsc: Detect card power-up without RESET In some readers (at least CardMan 3121), the simtrace2-cardem firmware claims there are power-up sequences where RESET is released before VCC becomes active. Let's detect such spec-incompliant power-up sequences and use them to trigger a cold reset of the card. Change-Id: I682ac3d0c2b98749a6ed44f9a73e4b39354a4284 Closes: OS#5421 --- M host/src/simtrace2-cardem-pcsc.c 1 file changed, 23 insertions(+), 5 deletions(-) git pull ssh://gerrit.osmocom.org:29418/simtrace2 refs/changes/01/27001/1 diff --git a/host/src/simtrace2-cardem-pcsc.c b/host/src/simtrace2-cardem-pcsc.c index 807df72..c684868 100644 --- a/host/src/simtrace2-cardem-pcsc.c +++ b/host/src/simtrace2-cardem-pcsc.c @@ -74,22 +74,40 @@ static uint32_t last_status_flags = 0; +#define NO_RESET 0 +#define COLD_RESET 1 +#define WARM_RESET 2 + static void update_status_flags(struct osmo_st2_cardem_inst *ci, uint32_t flags) { struct osim_card_hdl *card = ci->chan->card; + int reset = NO_RESET; + /* check if card is _now_ operational: VCC+CLK present, RST absent */ if ((flags & CEMU_STATUS_F_VCC_PRESENT) && (flags & CEMU_STATUS_F_CLK_ACTIVE) && !(flags & CEMU_STATUS_F_RESET_ACTIVE)) { if (last_status_flags & CEMU_STATUS_F_RESET_ACTIVE) { /* a reset has just ended, forward it to the real card */ - bool cold_reset = true; if (last_status_flags & CEMU_STATUS_F_VCC_PRESENT) - cold_reset = false; - LOGCI(ci, LOGL_NOTICE, "%s Resetting card in reader...\n", - cold_reset ? "Cold" : "Warm"); - osim_card_reset(card, cold_reset); + reset = WARM_RESET; + else + reset = COLD_RESET; + } else if (!(last_status_flags & CEMU_STATUS_F_VCC_PRESENT)) { + /* power-up has just happened, perform cold reset */ + reset = COLD_RESET; } + } else if (flags == CEMU_STATUS_F_VCC_PRESENT && + !(last_status_flags & CEMU_STATUS_F_VCC_PRESENT)) { + /* improper power-up: Only power enabled, but no reset active. */ + reset = COLD_RESET; } + + if (reset) { + LOGCI(ci, LOGL_NOTICE, "%s Resetting card in reader...\n", + reset == COLD_RESET ? "Cold" : "Warm"); + osim_card_reset(card, reset == COLD_RESET ? true : false); + } + last_status_flags = flags; } -- To view, visit https://gerrit.osmocom.org/c/simtrace2/+/27001 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: simtrace2 Gerrit-Branch: master Gerrit-Change-Id: I682ac3d0c2b98749a6ed44f9a73e4b39354a4284 Gerrit-Change-Number: 27001 Gerrit-PatchSet: 1 Gerrit-Owner: laforge <laforge(a)osmocom.org> Gerrit-MessageType: newchange

3 years, 4 months

1
0
0 0

Change in simtrace2[master]: simtrace2-cardem-pcsc: Move all logging into libosmocore

by laforge

laforge has uploaded this change for review. ( https://gerrit.osmocom.org/c/simtrace2/+/27000 ) Change subject: simtrace2-cardem-pcsc: Move all logging into libosmocore ...................................................................... simtrace2-cardem-pcsc: Move all logging into libosmocore * drop log statements that are already in libosmo-simtrace2 * don't printf directly, but go via LOGCI * make LOGCI use libosmocore logging * configure libosmocore logging in a 'convenient' way Change-Id: I6fa0da966e6d8e723c187404c17e90cfb3f3dd9f --- M host/src/simtrace2-cardem-pcsc.c 1 file changed, 26 insertions(+), 13 deletions(-) git pull ssh://gerrit.osmocom.org:29418/simtrace2 refs/changes/00/27000/1 diff --git a/host/src/simtrace2-cardem-pcsc.c b/host/src/simtrace2-cardem-pcsc.c index 19ed94e..807df72 100644 --- a/host/src/simtrace2-cardem-pcsc.c +++ b/host/src/simtrace2-cardem-pcsc.c @@ -1,7 +1,7 @@ /* simtrace2-cardem-pcsc - main program for the host PC to provide a remote SIM * using the SIMtrace 2 firmware in card emulation mode * - * (C) 2016-2021 by Harald Welte <hwelte(a)hmw-consulting.de> + * (C) 2016-2022 by Harald Welte <hwelte(a)hmw-consulting.de> * (C) 2018, sysmocom -s.f.m.c. GmbH, Author: Kevin Redon <kredon(a)sysmocom.de> * * This program is free software; you can redistribute it and/or @@ -49,7 +49,7 @@ #include <osmocom/sim/class_tables.h> #include <osmocom/sim/sim.h> -#define LOGCI(ci, lvl, fmt, args ...) printf(fmt, ## args) +#define LOGCI(ci, lvl, fmt, args ...) LOGP(DLGLOBAL, lvl, fmt, ## args) static void atr_update_csum(uint8_t *atr, unsigned int atr_len) { @@ -93,6 +93,17 @@ last_status_flags = flags; } +static const char *cemu_data_flags2str(uint32_t flags) +{ + static char out[64]; + snprintf(out, sizeof(out), "%s%s%s%s", + flags & CEMU_DATA_F_TPDU_HDR ? "HDR " : "", + flags & CEMU_DATA_F_FINAL ? "FINAL " : "", + flags & CEMU_DATA_F_PB_AND_TX ? "PB_AND_TX " : "", + flags & CEMU_DATA_F_PB_AND_RX ? "PB_AND_RX" : ""); + return out; +} + /*********************************************************************** * Incoming Messages ***********************************************************************/ @@ -104,7 +115,7 @@ char fbuf[80]; cemu_status_flags2str(fbuf, sizeof(fbuf), status->flags); - printf("=> STATUS: flags=0x%x, fi=%u, di=%u, wi=%u wtime=%u (%s)\n", + LOGCI(ci, LOGL_NOTICE, "=> STATUS: flags=0x%x, fi=%u, di=%u, wi=%u wtime=%u (%s)\n", status->flags, status->fi, status->di, status->wi, status->waiting_time, fbuf); @@ -119,7 +130,7 @@ struct cardemu_usb_msg_pts_info *pts; pts = (struct cardemu_usb_msg_pts_info *) buf; - printf("=> PTS req: %s\n", osmo_hexdump(pts->req, sizeof(pts->req))); + LOGCI(ci, LOGL_NOTICE, "=> PTS req: %s\n", osmo_hexdump(pts->req, pts->pts_len)); return 0; } @@ -133,8 +144,8 @@ data = (struct cardemu_usb_msg_rx_data *) buf; - printf("=> DATA: flags=%x, %s: ", data->flags, - osmo_hexdump(data->data, data->data_len)); + LOGCI(ci, LOGL_INFO, "=> DATA: flags=0x%02x (%s), %s\n ", data->flags, + cemu_data_flags2str(data->flags), osmo_hexdump(data->data, data->data_len)); rc = osmo_apdu_segment_in(&ac, data->data, data->data_len, data->flags & CEMU_DATA_F_TPDU_HDR); @@ -163,7 +174,6 @@ msgb_apdu_sw(tmsg) = msgb_get_u16(tmsg); ac.sw[0] = msgb_apdu_sw(tmsg) >> 8; ac.sw[1] = msgb_apdu_sw(tmsg) & 0xff; - printf("SW=0x%04x, len_rx=%d\n", msgb_apdu_sw(tmsg), msgb_l3len(tmsg)); if (msgb_l3len(tmsg)) osmo_st2_cardem_request_pb_and_tx(ci, ac.hdr.ins, tmsg->l3h, msgb_l3len(tmsg)); osmo_st2_cardem_request_sw_tx(ci, ac.sw); @@ -179,8 +189,6 @@ struct simtrace_msg_hdr *sh = (struct simtrace_msg_hdr *)buf; int rc; - printf("-> %s\n", osmo_hexdump(buf, len)); - buf += sizeof(*sh); switch (sh->msg_type) { @@ -213,7 +221,7 @@ char fbuf[80]; cemu_status_flags2str(fbuf, sizeof(fbuf), status->flags); - LOGCI(ci, LOGL_INFO, "=> IRQ STATUS: flags=0x%x, fi=%u, di=%u, wi=%u wtime=%u (%s)\n", + LOGCI(ci, LOGL_NOTICE, "=> IRQ STATUS: flags=0x%x, fi=%u, di=%u, wi=%u wtime=%u (%s)\n", status->flags, status->fi, status->di, status->wi, status->waiting_time, fbuf); @@ -227,8 +235,6 @@ struct simtrace_msg_hdr *sh = (struct simtrace_msg_hdr *)buf; int rc; - LOGCI(ci, LOGL_INFO, "SIMtrace IRQ %s\n", osmo_hexdump(buf, len)); - buf += sizeof(*sh); switch (sh->msg_type) { @@ -351,7 +357,7 @@ static void print_welcome(void) { printf("simtrace2-cardem-pcsc - Using PC/SC reader as SIM\n" - "(C) 2010-2020, Harald Welte <laforge(a)gnumonks.org>\n" + "(C) 2010-2022, Harald Welte <laforge(a)gnumonks.org>\n" "(C) 2018, sysmocom -s.f.m.c. GmbH, Author: Kevin Redon <kredon(a)sysmocom.de>\n\n"); } @@ -454,6 +460,13 @@ } osmo_init_logging2(NULL, &log_info); + log_set_print_category_hex(osmo_stderr_target, false); + log_set_print_category(osmo_stderr_target, true); + log_set_print_level(osmo_stderr_target, true); + log_set_print_filename_pos(osmo_stderr_target, LOG_FILENAME_POS_LINE_END); + log_set_print_filename2(osmo_stderr_target, LOG_FILENAME_NONE); + log_set_category_filter(osmo_stderr_target, DLINP, 1, LOGL_DEBUG); + log_set_category_filter(osmo_stderr_target, DLGLOBAL, 1, LOGL_DEBUG); while (1) { int option_index = 0; -- To view, visit https://gerrit.osmocom.org/c/simtrace2/+/27000 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: simtrace2 Gerrit-Branch: master Gerrit-Change-Id: I6fa0da966e6d8e723c187404c17e90cfb3f3dd9f Gerrit-Change-Number: 27000 Gerrit-PatchSet: 1 Gerrit-Owner: laforge <laforge(a)osmocom.org> Gerrit-MessageType: newchange

3 years, 4 months

1
0
0 0

Change in simtrace2[master]: fw/qmod: enable modem RESET by default at boot

by laforge

laforge has uploaded this change for review. ( https://gerrit.osmocom.org/c/simtrace2/+/26998 ) Change subject: fw/qmod: enable modem RESET by default at boot ...................................................................... fw/qmod: enable modem RESET by default at boot When the uC firmware starts, assert the (high-active) _RESET GPIOs, which will cause the transistors to drive the mPCIe slot !PERST low. There is of course a short instance of time between the uC reset until it executes wwan_perst_init(). To avoid this, a hardware pull-up would have to be re-worked onto the _RESET[1..4] signals on the PCBA Change-Id: I8742fefa4bf02e728e34d5d8cbc0fda771e78ffb --- M firmware/libboard/qmod/include/board.h 1 file changed, 2 insertions(+), 2 deletions(-) git pull ssh://gerrit.osmocom.org:29418/simtrace2 refs/changes/98/26998/1 diff --git a/firmware/libboard/qmod/include/board.h b/firmware/libboard/qmod/include/board.h index 7ea5bd7..56d0d21 100644 --- a/firmware/libboard/qmod/include/board.h +++ b/firmware/libboard/qmod/include/board.h @@ -89,8 +89,8 @@ #define PINS_WWAN_IN { PIN_WWAN1, PIN_WWAN2 } /* outputs controlling RESET input of modems */ -#define PIN_PERST1 {PIO_PA25, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_PULLUP} -#define PIN_PERST2 {PIO_PA26, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_PULLUP} +#define PIN_PERST1 {PIO_PA25, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_PULLUP} +#define PIN_PERST2 {PIO_PA26, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_PULLUP} #define PINS_PERST { PIN_PERST1, PIN_PERST2 } #define PIN_VERSION_DET {PIO_PA19, PIOA, ID_PIOA, PIO_PERIPH_D, PIO_DEFAULT} -- To view, visit https://gerrit.osmocom.org/c/simtrace2/+/26998 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: simtrace2 Gerrit-Branch: master Gerrit-Change-Id: I8742fefa4bf02e728e34d5d8cbc0fda771e78ffb Gerrit-Change-Number: 26998 Gerrit-PatchSet: 1 Gerrit-Owner: laforge <laforge(a)osmocom.org> Gerrit-MessageType: newchange

3 years, 4 months

1
0
0 0

Change in simtrace2[master]: simtrace2-cardem-pcsc: rename 'flags' to 'status_flags'

by laforge

laforge has uploaded this change for review. ( https://gerrit.osmocom.org/c/simtrace2/+/26999 ) Change subject: simtrace2-cardem-pcsc: rename 'flags' to 'status_flags' ...................................................................... simtrace2-cardem-pcsc: rename 'flags' to 'status_flags' there are other flags in the simtrace/cardem protocol... Change-Id: I6362936c642e7abf4c501b4526a1654a25afedfe --- M host/src/simtrace2-cardem-pcsc.c 1 file changed, 11 insertions(+), 11 deletions(-) git pull ssh://gerrit.osmocom.org:29418/simtrace2 refs/changes/99/26999/1 diff --git a/host/src/simtrace2-cardem-pcsc.c b/host/src/simtrace2-cardem-pcsc.c index 8b08f36..19ed94e 100644 --- a/host/src/simtrace2-cardem-pcsc.c +++ b/host/src/simtrace2-cardem-pcsc.c @@ -62,7 +62,7 @@ atr[atr_len-1] = csum; } -static void cemu_flags2str(char *out, unsigned int out_len, uint32_t flags) +static void cemu_status_flags2str(char *out, unsigned int out_len, uint32_t flags) { snprintf(out, out_len, "%s%s%s%s%s", flags & CEMU_STATUS_F_RESET_ACTIVE ? "RESET " : "", @@ -72,25 +72,25 @@ flags & CEMU_STATUS_F_RCEMU_ACTIVE ? "RCEMU " : ""); } -static uint32_t last_flags = 0; +static uint32_t last_status_flags = 0; -static void update_flags(struct osmo_st2_cardem_inst *ci, uint32_t flags) +static void update_status_flags(struct osmo_st2_cardem_inst *ci, uint32_t flags) { struct osim_card_hdl *card = ci->chan->card; if ((flags & CEMU_STATUS_F_VCC_PRESENT) && (flags & CEMU_STATUS_F_CLK_ACTIVE) && !(flags & CEMU_STATUS_F_RESET_ACTIVE)) { - if (last_flags & CEMU_STATUS_F_RESET_ACTIVE) { + if (last_status_flags & CEMU_STATUS_F_RESET_ACTIVE) { /* a reset has just ended, forward it to the real card */ bool cold_reset = true; - if (last_flags & CEMU_STATUS_F_VCC_PRESENT) + if (last_status_flags & CEMU_STATUS_F_VCC_PRESENT) cold_reset = false; LOGCI(ci, LOGL_NOTICE, "%s Resetting card in reader...\n", cold_reset ? "Cold" : "Warm"); osim_card_reset(card, cold_reset); } } - last_flags = flags; + last_status_flags = flags; } /*********************************************************************** @@ -103,12 +103,12 @@ struct cardemu_usb_msg_status *status = (struct cardemu_usb_msg_status *) buf; char fbuf[80]; - cemu_flags2str(fbuf, sizeof(fbuf), status->flags); + cemu_status_flags2str(fbuf, sizeof(fbuf), status->flags); printf("=> STATUS: flags=0x%x, fi=%u, di=%u, wi=%u wtime=%u (%s)\n", status->flags, status->fi, status->di, status->wi, status->waiting_time, fbuf); - update_flags(ci, status->flags); + update_status_flags(ci, status->flags); return 0; } @@ -212,12 +212,12 @@ const struct cardemu_usb_msg_status *status = (struct cardemu_usb_msg_status *) buf; char fbuf[80]; - cemu_flags2str(fbuf, sizeof(fbuf), status->flags); - LOGCI(ci, LOGL_INFO, "SIMtrace IRQ STATUS: flags=0x%x, fi=%u, di=%u, wi=%u wtime=%u (%s)\n", + cemu_status_flags2str(fbuf, sizeof(fbuf), status->flags); + LOGCI(ci, LOGL_INFO, "=> IRQ STATUS: flags=0x%x, fi=%u, di=%u, wi=%u wtime=%u (%s)\n", status->flags, status->fi, status->di, status->wi, status->waiting_time, fbuf); - update_flags(ci, status->flags); + update_status_flags(ci, status->flags); return 0; } -- To view, visit https://gerrit.osmocom.org/c/simtrace2/+/26999 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: simtrace2 Gerrit-Branch: master Gerrit-Change-Id: I6362936c642e7abf4c501b4526a1654a25afedfe Gerrit-Change-Number: 26999 Gerrit-PatchSet: 1 Gerrit-Owner: laforge <laforge(a)osmocom.org> Gerrit-MessageType: newchange

3 years, 4 months

1
0
0 0

Change in osmo-iuh[master]: ranap_common_ran: add decoder for RAN/RNC originated messages

by laforge

Attention is currently required from: dexter. laforge has posted comments on this change. ( https://gerrit.osmocom.org/c/osmo-iuh/+/26955 ) Change subject: ranap_common_ran: add decoder for RAN/RNC originated messages ...................................................................... Patch Set 1: (2 comments) Patchset: PS1: I agree with the linter, and the copyright statement needs updating. Apart from that: LGTM! File src/ranap_common_ran.c: https://gerrit.osmocom.org/c/osmo-iuh/+/26955/comment/2081160c_21731956 PS1, Line 3: / I didn't write this, right? I guess it should be (C) sysmocom Author: pmaier -- To view, visit https://gerrit.osmocom.org/c/osmo-iuh/+/26955 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: osmo-iuh Gerrit-Branch: master Gerrit-Change-Id: Iad4c2743d4d1ddf8ad49002d1fe6866f22eb9e98 Gerrit-Change-Number: 26955 Gerrit-PatchSet: 1 Gerrit-Owner: dexter <pmaier(a)sysmocom.de> Gerrit-Reviewer: Jenkins Builder Gerrit-CC: laforge <laforge(a)osmocom.org> Gerrit-Attention: dexter <pmaier(a)sysmocom.de> Gerrit-Comment-Date: Wed, 26 Jan 2022 16:47:07 +0000 Gerrit-HasComments: Yes Gerrit-Has-Labels: No Gerrit-MessageType: comment

3 years, 4 months

1
0
0 0

Change in docker-playground[master]: ttcn3-bsc-test/jenkins.sh: fix '--ulimit core=-1' set twice

by laforge

laforge has submitted this change. ( https://gerrit.osmocom.org/c/docker-playground/+/26987 ) Change subject: ttcn3-bsc-test/jenkins.sh: fix '--ulimit core=-1' set twice ...................................................................... ttcn3-bsc-test/jenkins.sh: fix '--ulimit core=-1' set twice Change-Id: I3223f8f4cc09797de44971215a94fc62ad8d263b --- M ttcn3-bsc-test/jenkins.sh 1 file changed, 0 insertions(+), 1 deletion(-) Approvals: laforge: Looks good to me, approved; Verified diff --git a/ttcn3-bsc-test/jenkins.sh b/ttcn3-bsc-test/jenkins.sh index 7f05c5e..fd9046c 100755 --- a/ttcn3-bsc-test/jenkins.sh +++ b/ttcn3-bsc-test/jenkins.sh @@ -32,7 +32,6 @@ --ulimit core=-1 \ -v $VOL_BASE_DIR/stp:/data \ --name ${BUILD_TAG}-stp -d \ - --ulimit core=-1 \ $DOCKER_ARGS \ $REPO_USER/osmo-stp-$IMAGE_SUFFIX -- To view, visit https://gerrit.osmocom.org/c/docker-playground/+/26987 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: docker-playground Gerrit-Branch: master Gerrit-Change-Id: I3223f8f4cc09797de44971215a94fc62ad8d263b Gerrit-Change-Number: 26987 Gerrit-PatchSet: 2 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-MessageType: merged

3 years, 4 months

1
0
0 0

Change in docker-playground[master]: ttcn3-bsc-test/jenkins.sh: fix '--ulimit core=-1' set twice

by laforge

Attention is currently required from: fixeria. laforge has posted comments on this change. ( https://gerrit.osmocom.org/c/docker-playground/+/26987 ) Change subject: ttcn3-bsc-test/jenkins.sh: fix '--ulimit core=-1' set twice ...................................................................... Patch Set 1: Verified+1 Code-Review+2 -- To view, visit https://gerrit.osmocom.org/c/docker-playground/+/26987 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: docker-playground Gerrit-Branch: master Gerrit-Change-Id: I3223f8f4cc09797de44971215a94fc62ad8d263b Gerrit-Change-Number: 26987 Gerrit-PatchSet: 1 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Comment-Date: Wed, 26 Jan 2022 16:43:26 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

3 years, 4 months

1
0
0 0

Change in docker-playground[master]: osmo-uecups-master: add more complete osmo-uecups-daemon.cfg

by laforge

laforge has submitted this change. ( https://gerrit.osmocom.org/c/docker-playground/+/26983 ) Change subject: osmo-uecups-master: add more complete osmo-uecups-daemon.cfg ...................................................................... osmo-uecups-master: add more complete osmo-uecups-daemon.cfg Change-Id: I16e3f60485039efd3b965009608982c27511b680 Related: SYS#5602 --- M osmo-uecups-master/osmo-uecups-daemon.cfg 1 file changed, 15 insertions(+), 0 deletions(-) Approvals: laforge: Looks good to me, approved; Verified diff --git a/osmo-uecups-master/osmo-uecups-daemon.cfg b/osmo-uecups-master/osmo-uecups-daemon.cfg index e69de29..9f63bb7 100644 --- a/osmo-uecups-master/osmo-uecups-daemon.cfg +++ b/osmo-uecups-master/osmo-uecups-daemon.cfg @@ -0,0 +1,15 @@ +log stderr + logging filter all 1 + logging print extended-timestamp 1 + logging print file basename last + logging print category-hex 0 + logging print category 1 + logging print level 1 + logging timestamp 1 + logging color 0 +! + logging level set-all info +line vty + bind 0.0.0.0 +uecups + local-ip 0.0.0.0 -- To view, visit https://gerrit.osmocom.org/c/docker-playground/+/26983 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: docker-playground Gerrit-Branch: master Gerrit-Change-Id: I16e3f60485039efd3b965009608982c27511b680 Gerrit-Change-Number: 26983 Gerrit-PatchSet: 2 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-MessageType: merged

3 years, 4 months

1
0
0 0

Change in docker-playground[master]: osmo-uecups-master: add more complete osmo-uecups-daemon.cfg

by laforge

Attention is currently required from: fixeria. laforge has posted comments on this change. ( https://gerrit.osmocom.org/c/docker-playground/+/26983 ) Change subject: osmo-uecups-master: add more complete osmo-uecups-daemon.cfg ...................................................................... Patch Set 2: Verified+1 Code-Review+2 -- To view, visit https://gerrit.osmocom.org/c/docker-playground/+/26983 To unsubscribe, or for help writing mail filters, visit https://gerrit.osmocom.org/settings Gerrit-Project: docker-playground Gerrit-Branch: master Gerrit-Change-Id: I16e3f60485039efd3b965009608982c27511b680 Gerrit-Change-Number: 26983 Gerrit-PatchSet: 2 Gerrit-Owner: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Reviewer: laforge <laforge(a)osmocom.org> Gerrit-Attention: fixeria <vyanitskiy(a)sysmocom.de> Gerrit-Comment-Date: Wed, 26 Jan 2022 16:43:07 +0000 Gerrit-HasComments: No Gerrit-Has-Labels: Yes Gerrit-MessageType: comment

3 years, 4 months

1
0
0 0

2025

2024

2023

2022

gerrit-log January 2022